Preliminary Design
Dec 31, 2015
Preliminary Design. Ron Klemencic, P.E., S.E. President, Magnusson Klemencic Associates Presented by: John Hooper, P.E., S.E. Director of Earthquake Engineering, Magnusson Klemencic Associates. Structural Configuration. Simple arrangement of structural elements Clearly defined load paths - PowerPoint PPT Presentation
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Preliminary Design
Ron Klemencic, P.E., S.E.
President, Magnusson Klemencic Associates
Presented by:
John Hooper, P.E., S.E.
Director of Earthquake Engineering,
Magnusson Klemencic Associates
Structural Configuration
Simple arrangement of structural elements Clearly defined load paths Complicated configurations and geometries
complicate behavior—avoid to the extent possible
Changes in Building Stiffness and Mass
System Configuration
Repositioning of Bracing Elements
System Configuration
Multiple Towers on a Common Base
System Configuration
Column Transfers and Offsets
System Configuration
Gravity Induced Shear Forces
System Configuration
Limited Connectivity of Floor Diaphragms
System Configuration
Concentration of Diaphragm Demands
System Configuration
Structural Performance Hierarchy
Identify zone or elements of nonlinear response Establish hierarchy of the nonlinear elements Incorporate capacity design concepts as
appropriate for remaining elements Confirm hierarchy through nonlinear response
history analysis
WIDTH?
Wind
WIDTH?
Wind
Significantly Impact Shear and Flexural Demands
Higher Mode Effects
Higher Mode Effects
Column Demands Due to Outrigger Over Strength
Outrigger Elements
Design Base Shear
Serviceability Base Shears
One Rincon Hill Tower Core NLTHALCI (High Gravity) Interstory Drift
[Y-Direction, NW corner]
Drift
Flexural Demands
Core Shear
Coupling Beam Rotations
Related Documents
