Precise Planning with 3D Scan-data in Revit Architecture using the FARO Laser Scanner Focus3D

laser-scanning-architecture.com

laser-scanning-architectureArchitekt Johannes Rechenbach, Hannoverphone +49-511-814060 [email protected]

mailto:[email protected]


VitaJohannes Rechenbach, Architect

• Diploma 1992 in Berlin

• Own Architecture Firm in Hanover, Germany since 2000

• 20 Years of Experience in all Phases of Planning and Building

• Reconstruction Projects and New Buildings

• 3D-Scan-Service and Support, FARO Architecture Network

Kleegarten Seniorenresidenz Hanover 2006



Challenge of today: Energy-efficient Restoration of existing Structures

• ProblemAccurate visual and geometrical Documentation

• ComplexityNecessity of precise Detailing for energetic Sufficiency

• LiabilityHigher Risk compared to new Constructions

50% Restoration!


Present 2D-Documentation:

• Higher Planning Expensesbecause of missing or incorrect Documentation

• Higher Building Expensesbecause of unsufficient Documentation for the Tender Procedure

• Loss of Building Quality and Increase of Construction Timebecause of late Detail Decisions during the Building Process

not economical!



Preoccupations against 3D-Laserscanning:

• highly expensive, therefore suits only specific purposes

• huge amount of data, not suitable for the average client

• post-processing very time-consumingand not efficient

FARO Focus3d cuts hardware costs by 50%

great workflow with 64 bit Systems + up-to-date Software

easy with Autocad + Revit

this is History!


10 Scan-Positions in 3 Hours: undistorted Floor-Plan Extraction for your CAAD


10 Scan-Positions in 3 Hours: undistorted Sections at any desired Location within the 3d-Model


10 Scan-Positions in 3 Hours: creative Animations at any desired Location within the 3d-Model


10 Scan-Positions in 3 Hours: creative Animations at any desired Location within the 3d-Model


laser scanning architecture







USA:General Services Administration GSA BIM Guide Series:

„The benefits of determining the spatial environment and as built conditions (by 3D-Imaging) have played a key role in reducing costs and delivering a higher quality engineering effort.”

Advice: Use of 3D-Imaging and BIM for best results in public building projects

England:Introduction of BIM for all public building projects until 2016. 37.000 public buildings with heritage value.

Sweden und Finland:BIM is mandatrory for the building application – no more 2D drawings

Germany: ……….???


Scan of an industrial historic Building for the Project Development in Berlin


Advantages:

• only one Time on Site without taking Measurements again and again • no more Mistakes and Failure because of wrong or missing Information• one Data Model for all Extractions


Faro Webshare: • Project-Documentation in the Internet• Visual Analysis in 360° Panoramas• Measurements for Distances and Spaces online


2D-Images using PointCab

Steel framework of the Roof Construction:accurate Measuring in CAAD

Documentation of the as-built Situation:

- Brick Formats- Wall Details- structural Damages


Import of Pointcloud Data into Revit: Basis for Modeling the existing Building















3D-Imaging for Restoration Projects

Planning with 3D-Scans in Revit ArchitecturePublic Church Building near Hanover, Germany


Revit-Model by rechenbach architecture


Panoramic View with 3D-Measurements in Scansoftware FARO Scene


Panoramic View with 3D-Measurements in Scansoftware FARO Scene


Correspondence View in Scansoftware FARO Scene


Remodeling: Pointcloud in Revit Architecture









Thank you for Listening!


laser-scanning-architectureArchitect Johannes Rechenbach, Hannoverphone +49-511-814060 [email protected]

mailto:[email protected]

Precise Planning with 3D Scan-data in Revit Architecture using the FARO Laser Scanner Focus3D

Real Estate

pointcloud data

rechenbach architecture

data model

d drawingsgermany

architecture firm

germany revitmodel

public building projects

building application