Pre-Requisites For Transferring the Data of Consolidated Report of DB-Analyzer (New EXE) Also Called As DB-Analyzer +

Pre-Requisites For Transferring

the Data of Consolidated Report

of DB-Analyzer (New EXE)

Also Called As

DB-Analyzer +

Pre-Requisites – DB Analyzer+

• Disable the Anti-Virus / Firewall (Temporarily for this purpose only).

• The IP Address of the node needs to be configured with Local Server + Broadband (Router) of BSNL / MTNL so that the node should be able to access Local Server as well as Internet connection thru Broadband only.

• There should not be WAN connectivity to the node OR the node should be out of WAN.

• Few Slides for you further may be helpful to carry out the task successfully.

This is the screenshot of DBAnalyzer executed without Disabling the AntiVirus / Firewall

You can see the Status as encircled in Green as soon as u Run DB Analyzer without Disabling the AntiVirus / Firewall

The said task will show the status in number upto 199 everytime when u execute the DBA’s Consolidated Report and will flash a message / warning about Firewall / Antivirus and prompts u to press any key. (But, this is NOT CORRECT as the Antivirus is still in Active mode. See at bottom-right-corner). The data would not go to the Central Server.

After Disabling the AntiVirus / Firewall, when u run the DBA’s Consolidated Report Option, the first message appears as shown in the screenshot below

and prompts you to confirm whether to proceed ahead (Y/N).

The progress (number encircled) will continue till it reaches to 199.

The message / warning appears as soon as the progress number reaches upto 199 and prompts u to press any Key.

FINAL MESSAGE appears as shown below on successful sending the data to Central Server.

Additional Guidelines…

Additional Guidelines…

Additional Guidelines…

All The Best