0 PRE FEASIBILITY REPORT For PROPOSED EXPANSION OF OPTICAL WHITENING AGENT / OPTICAL BRIGHTENER AND TEXTILE & LEATHER CHEMICALS IN EXISTING UNIT of M/s. BASF INDIA LIMITED (UNIT-I) PLOT NO. 6216, PHASE-IV, G.I.D.C., ANKLESHWAR, DIST: BHARUCH-393002, GUJARAT
37
Embed
PRE FEASIBILITY REPORT - environmentclearance.nic.inenvironmentclearance.nic.in/writereaddata/FormB/TOR/PFR/07_Oct... · PRE FEASIBILITY REPORT ... Fixapret Resin F-ECO 3 Heliz.Binder
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
0
PRE FEASIBILITY REPORT
For
PROPOSED EXPANSION OF OPTICAL WHITENING
AGENT / OPTICAL BRIGHTENER AND TEXTILE &
LEATHER CHEMICALS IN EXISTING UNIT
of
M/s. BASF INDIA LIMITED (UNIT-I)
PLOT NO. 6216, PHASE-IV, G.I.D.C.,
ANKLESHWAR, DIST: BHARUCH-393002, GUJARAT
1
CONTENTS
Sr. No. Description Page No.
1. Executive Summary 2
2. Introduction of the Project/Background information 14
3. Project Description 17
4. Site Analysis 23
5. Planning Brief 25
6. Proposed Infrastructure 26
7. Rehabilitation and resettlement (R & R) Plan 28
8. Project Schedule & Cost Estimates 28
9. Analysis of Proposal (Final Recommendations) 28
2
1.0 EXECUTIVE SUMMARY
1.1 Company Profile
At BASF, we create chemistry for a sustainable future. We combine economic success with
environmental protection and social responsibility. Through science and innovation, we enable our
customers in nearly every industry to meet the current and future needs of society.
Ankleshwar site – Strengthening the BASF Paper Chemicals business – Optical whitening agent,
Floating Agent and Textile & Leather Chemicals - Located in the largest chemicals industrial parks in
India (in the state of Gujarat).
- BASF has embraced the goals of the chemical industry’s voluntary “Responsible Care Initiative and
applies them to the entire BASF group and Certified with the ISO 14001 environmental management
system and re-certified with the ISO 9001 quality management system.
3
Project Details
1.2.1 Products along with Production Capacity
Sr. No.
Existing Production in MT / Month Proposed Production in MT / Month
Products Name Quantity Products Name Total Quantity After expansion
2 Formulation & Packing of OPTICAL WHITENING AGENT/OPTICAL BRIGHTENER Formulation including additives (Marketable Basis)
2500
3 Optical Whitening Agent / Optical Brightener (On 100% Basis)
600
4 -- -- Manufacturing, Formulation, Mixing & Packing of Textile and Leather Chemicals : Binders, Auxiliaries Chemicals for tanning & finishing agents such as textile, dispersions, lacquers, pigments, lepton colours.
1500
5 -- -- Floating agents 60
6 -- -- Spray Drying, formulation and Packing of Water Treatment Chemicals & Paper Dyes ( Sokalan, Magnafloc, Pergasol & Irgalite)
1750
7 -- -- R&D Products on Pilot Plant Scale
2
Total 3100 -- 6452
4
Product List along with CAS Number.
Sr. No.
NAME OF PRODUCTS CAS No.
A Manufacturing, Formulation, Drying, Mixing & Packing of OPTICAL WHITENING AGENT/OPTICAL BRIGHTENER
--
1 Tinopal DMA-X 16090-02-1
Tinopal DMA-X CONC
2 Tinopal BA 4193-55-9
Tinopal BMK
Tinopal UP LIQUID
Tinopal BHT HC LIQUID
Tinopal NP SLURRY
3 Tinopal ABP-X HC 16470-24-9
Tinopal ABP-A LIQUID
Tinopal ABA LIQUID
4 Tinopal 5BM-GX 13863-31-5
5 Tinopal SFP 41098-56-0
Tinopal SPP-Z LIQUID
Tinopal SHP LIQUID
Tinopal AS LIQUID
6 Tinopal ASP LIQUID 67786-25-8
7 Tinopal BOP EXTRA 12224-02-1
B Manufacturing, Formulation, Mixing & Packing of Textile and Leather Chemicals : Binders, Auxiliaries Chemicals for tanning & finishing agents such as textile, dispersions, lacquers, pigments, lepton colours.
--
1 Cyclanon Clear ECO Plus / New Mictures of 149-44-0 2634-33-5 Cyclanon Wff XC-W New
3 Dekol Wff RSA / SN Mixtures of 112-34-5 110-16-7 55965-84-9
2 Densotan CP Mictures of
5
Ekoline Easy Care 111-46-6 50-00-0
Fixapret Cat F-M
Fixapret Resin F-ECO
3 Heliz.Binder CFF Mixtures of 136132-73-5 9043-30-5
14 Basyntan AN Mixture of 108-95-2 1310-73-2 57-13-6 117985-54-3 102980-04-1 50-00-0 7757-82-6 1336-21-6 108-78-1
Basyntan ANF
Basyntan AN Condensate
Basyntan DLE
Basyntan DX
Basyntan FB DI
Basyntan FB. P
Basyntan XA
C Floating agents Mixture of 9003-11-6 64742-47-8 68526-89-6.
D Spray Drying, formulation and Packing of Water Treatment Chemicals & Paper Dyes ( Sokalan, Magnafloc, Pergasol & Irgalite)
--
E R&D Products on Pilot Plant Scale --
8
Raw Material Requirement
Sr. No.
Name of the product
Material CAS Number Quantity (MT/Month)
Existing Proposed Total
A. Manufacturing, Formulation, Drying, Mixing & Packing of OPTICAL WHITENING AGENT/OPTICAL BRIGHTENER
1 Tinopal DMA-X
Aniline 62-53-3 21.5 0.0 21.5
Baykanol 1.72 0.0 1.72
Cyanuric Chloride 108-77-0 43.0 0.0 43.0
DASDA 81-11-8 43.645 0.0 43.65
Hyflo 68855-54-9 0.645 0.0 0.65
Morpholine 110-91-8 19.78 0.0 19.78
Sodium Chloride 7647-14-5 24.94 0.0 24.94
Sodium Hydroxide 1310-73-2 58.05 0.0 58.05
OT 70% 63148-62-9 0.065 0.0 0.06
Soda Ash 497-19-8 22.145 0.0 22.15
2 Tinopal DMA-X Conc
Aniline 62-53-3 54.0 0.0 54.0
Baykanol 1.62 0.0 1.62
Cyanuric Chloride 108-77-0 108.0 0.0 108.0
DASDA 81-11-8 109.62 0.0 109.62
Hyflo 68855-54-9 0.216 0.0 0.22
Morpholine 110-91-8 49.68 0.0 49.68
Sodium Chloride 7647-14-5 38.88 0.0 38.88
Sodium Hydroxide 1310-73-2 136.08 0.0 136.08
OT 70% 63148-62-9 0.162 0.0 0.16
Soda Ash 497-19-8 38.88 0.0 38.88
3 Tinopal BA
Aniline 62-53-3 0.105 0.0 0.11
Cyanuric Chloride 108-77-0 0.225 0.0 0.23
DASDA 81-11-8 0.224 0.0 0.22
DEA 85% 111-42-2 0.192 0.0 0.19
Hydrochloric Acid 7647-01-0 0.325 0.0 0.33
Hyflo 68855-54-9 0.003 0.0 0.0
Sodium Chloride 7647-14-5 0.211 0.0 0.21
Sodium Hydroxide 1310-73-2 0.431 0.0 0.43
OT 70% 63148-62-9 0.00038 0.0 0.0
Soda Ash 497-19-8 0.068 0.0 0.07
4 Tinopal BMK
Aniline 62-53-3 7.312 0.0 7.31
Cyanuric Chloride 108-77-0 14.4 0.0 14.4
DASDA 81-11-8 14.848 0.0 14.85
DEA 85% 111-42-2 9.28 0.0 9.28
Hyflo 68855-54-9 0.16 0.0 0.16
Sodium Chloride 7647-14-5 18.32 0.0 18.32
Sodium Hydroxide 1310-73-2 16.0 0.0 16.0
9
OT 70% 63148-62-9 0.024 0.0 0.02
Soda Ash 497-19-8 5.216 0.0 5.22
STPP 7758-29-5 0.448 0.0 0.45
5 Tinopal UP liquid
Aniline 62-53-3 1.402 0.0 1.4
Cyanuric Chloride 108-77-0 2.998 0.0 3.0
DASDA 81-11-8 2.981 0.0 2.98
DEA 85% 111-42-2 2.558 0.0 2.56
Hydrochloric Acid 7647-01-0 4.33 0.0 4.33
Hyflo 68855-54-9 0.033 0.0 0.03
Hyflo 68855-54-9 0.999 0.0 1.0
Sodium Chloride 7647-14-5 0.150 0.0 0.15
Sodium Hydroxide 1310-73-2 4.197 0.0 4.2
OT 70% 63148-62-9 0.005 0.0 0.0
Soda Ash 497-19-8 0.899 0.0 0.9
Urea 57-13-6 7.328 0.0 7.33
6 Tinopal BHT HC
Aniline 62-53-3 3.368 0.0 3.37
Cyanuric Chloride 108-77-0 7.2 0.0 7.2
DASDA 81-11-8 7.16 0.0 7.16
DEA 85% 111-42-2 5.16 0.0 5.16
Hydrochloric Acid 7647-01-0 10.4 0.0 10.4
Hyflo 68855-54-9 0.08 0.0 0.08
Sodium Chloride 7647-14-5 0.4 0.0 0.4
Sodium Hydroxide 1310-73-2 9.128 0.0 9.13
OT 70% 63148-62-9 0.012 0.0 0.01
Soda Ash 497-19-8 2.16 0.0 2.16
TEA 121-44-8 8.0 0.0 8.0
Urea 57-13-6 8.0 0.0 8.0
7 Tinopal NP Slurry
Aniline 62-53-3 2.105 0.0 2.11
Cyanuric Chloride 108-77-0 4.5 0.0 4.5
DASDA 81-11-8 4.475 0.0 4.48
DEA 85% 111-42-2 3.84 0.0 3.84
Glutaldhyde 111-30-8 0.095 0.0 0.1
Hyflo 68855-54-9 0.05 0.0 0.05
Sodium Chloride 7647-14-5 0.225 0.0 0.23
Sodium Hydroxide 1310-73-2 6.3 0.0 6.3
OT 70% 63148-62-9 0.008 0.0 0.01
Preventol 2634-33-5 0.26 0.0 0.26
Soda Ash 497-19-8 1.35 0.0 1.35
Xanthan gum 11138-66-2 0.095 0.0 0.1
8 Tinopal ABP-X HC
Cyanuric Chloride 108-77-0 6.0 0.0 6.0
DASDA 81-11-8 6.092 0.0 6.09
10
DEA 85% 111-42-2 4.352 0.0 4.35
Hyflo 68855-54-9 0.088 0.0 0.09
Sodium Chloride 7647-14-5 8.4 0.0 8.4
Sodium Hydroxide 1310-73-2 7.496 0.0 7.5
OT 70% 63148-62-9 0.009 0.0 0.01
Soda Ash 497-19-8 3.6 0.0 3.6
Sulphanilic acid 121-57-3 5.748 0.0 5.75
9 Tinopal ABP-A
Cyanuric Chloride 108-77-0 22.501 0.0 22.5
DASDA 81-11-8 21.451 0.0 21.45
DEA 85% 111-42-2 12.901 0.0 12.9
Glutaldhyde 111-30-8 5.4 0.0 5.4
Hyflo 68855-54-9 0.66 0.0 0.66
Sodium Hydroxide 1310-73-2 26.251 1.0 27.25
OT 70% 63148-62-9 0.034 2.0 2.03
Preventol 2634-33-5 0.75 3.0 3.75
Soda Ash 497-19-8 15.676 0.0 15.68
Sulphanilic acid 121-57-3 21.616 0.0 21.62
10 Tinopal ABA
Cyanuric Chloride 108-77-0 0.75 0.0 0.75
DASDA 81-11-8 0.715 0.0 0.72
DEA 85% 111-42-2 0.43 0.0 0.43
Hyflo 68855-54-9 0.022 0.0 0.02
Sodium Hydroxide 1310-73-2 0.875 0.0 0.88
OT 70% 63148-62-9 0.001 0.0 0.0
Soda Ash 497-19-8 0.523 0.0 0.52
Sulphanilic acid 121-57-3 0.721 0.0 0.72
11 Tinopal 5BM
Aniline 62-53-3 10.195 0.0 10.19
Cyanuric Chloride 108-77-0 20.39 0.0 20.39
DASDA 81-11-8 20.696 0.0 20.7
DAXAD 60L 0.408 0.0 0.41
Hyflo 68855-54-9 0.306 0.0 0.31
Sodium Chloride 7647-14-5 16.842 0.0 16.84
Sodium Hydroxide 1310-73-2 25.691 0.0 25.69
N-Methylethanolamine
109-83-1 8.849 0.0 8.85
OT 70% 63148-62-9 0.031 0.0 0.03
Soda Ash 497-19-8 6.117 0.0 6.12
12 Tinopal SFP
2,5 SA 98-44-2 0.555 0.0 0.56
Bay Pure 0.014 0.0 0.01
Cyanuric Chloride 108-77-0 0.375 0.0 0.38
DASDA 81-11-8 0.376 0.0 0.38
Diethyl amine 109-89-7 0.163 0.0 0.16
Hyflo 68855-54-9 0.006 0.0 0.01
Sodium Chloride 7647-14-5 0.875 0.0 0.88
Sodium Hydroxide 1310-73-2 0.576 0.0 0.58
11
OT 70% 63148-62-9 0.001 0.0 0.001
Soda Ash 497-19-8 0.146 0.0 0.15
13 Tinopal SPP-Z
2,5 SA 98-44-2 6.66 0.0 6.66
Cyanuric Chloride 108-77-0 4.5 0.0 4.5
DASDA 81-11-8 4.185 0.0 4.19
Diethyl amine 109-89-7 1.8 0.0 1.8
Hyflo 68855-54-9 0.096 0.0 0.1
Sodium Hydroxide 1310-73-2 9.507 0.0 9.51
OT 70% 63148-62-9 0.007 0.0 0.01
Soda Ash 497-19-8 0.252 0.0 0.25
14 Tinopal SHP
2,5 SA 98-44-2 2.22 0.0 2.22
Cyanuric Chloride 108-77-0 1.5 0.0 1.5
DASDA 81-11-8 1.502 0.0 1.5
Diethyl amine 109-89-7 0.65 0.0 0.65
Hyflo 68855-54-9 0.022 0.0 0.02
Sodium Chloride 7647-14-5 3.5 0.0 3.5
Sodium Hydroxide 1310-73-2 2.303 0.0 2.3
OT 70% 63148-62-9 0.002 0.0 0.0
PEG 1500 25322-68-3 9.375 0.0 9.38
Soda Ash 497-19-8 0.585 0.0 0.59
15 Tinopal AS
2,5 SA 98-44-2 5.975 0.0 5.98
Cyanuric Chloride 108-77-0 4.037 0.0 4.04
DASDA 81-11-8 3.755 0.0 3.75
Diethyl amine 109-89-7 1.615 0.0 1.61
Hyflo 68855-54-9 0.086 0.0 0.09
Sodium Hydroxide 1310-73-2 8.529 0.0 8.53
OT 70% 63148-62-9 0.006 0.0 0.01
Soda Ash 497-19-8 1.574 0.0 1.57
TEA 121-44-8 1.023 0.0 1.02
16 Tinopal ASP
Cyanuric Chloride 108-77-0 4.439 0.0 4.44
DASDA 81-11-8 4.291 0.0 4.29
DDA 3.699 0.0 3.70
Hyflo 68855-54-9 0.067 0.0 0.07
Sodium Hydroxide 1310-73-2 5.179 0.0 5.18
OT 70% 63148-62-9 0.007 0.0 0.01
Soda Ash 497-19-8 3.078 0.0 3.08
Sulphanilic acid 121-57-3 4.261 0.0 4.26
17 Tinopal BOP Extra
Cyanuric Chloride 108-77-0 3.0 0.0 3.0
DASDA 81-11-8 2.874 0.0 2.87
DEA 85% 111-42-2 2.86 0.0 2.86
Metanilic Acid 121-47-1 2.896 0.0 2.9
Sodium Chloride 7647-14-5 15.92 0.0 15.92
12
Sodium Hydroxide 1310-73-2 4.13 0.0 4.13
OT 70% 63148-62-9 0.005 0.0 0.01
Soda Ash 497-19-8 1.98 0.0 1.98
B. Textile and Leather Chemicals : Binders, Auxiliaries Chemicals for tanning & finishing agents such as textile, dispersions, lacquers, pigments, lepton colours.
1 Cyclanon Clear ECO Plus
- - -
Sodium Formaldehyde Sulfoxylate
149-44-0 0.0 8.0 8.0
2 Cyclanon Wff XC-W New
- - -
Dekol Dis SN 9003-04-7 0.0 2.46 2.46
ACTICIDE MBS Mixture of 2634-33-5 2682-20-4
0.0 0.06 0.06
Cyclanon 66 Mixture of 2682-20-4 7732-18-5
0.0 6.42 6.42
GLUCONIC ACID 526-95-4 0.0 0.72 0.72
DETPMPA (HEPTASODIUM SALT)
Mixture of 22042-96-2 7647-14-5
0.0 0.63 0.63
3 Dekol Wff RSA - - -
BUTYLDIGLYCOL 112-34-5 0.0 0.2 0.2
Luviskol K30 Powder
9003-39-8 0.0 1.0 1.0
Sokalan CP 5 52255-49-9 0.0 1.0 1.0
ACTICIDE MV 55965-84-9 0.0 0.16 0.16
4 Densotan CP 150KG 1H2
- - -
Fixapret Resin F-ECO
111-46-6 0.0 5.5 5.5
5 Ekoline Easy Care
- - -
Fixapret Resin F-ECO
111-46-6 0.0 5.4 5.4
6 Fixapret Cat F-M
- - -
AMMONIUM CHLORIDE
12125-02-9 0.0 0.28 0.28
MAGN CHLORO HEX HYD
7786-30-3 0.0 9.72 9.72
Hydrochloric Acid 7647-01-0 0.0 0.14 0.14
7 Fixapret Resin F-ECO
- - -
Glyoxal 172-22-2 0.0 5.84 5.84
13
Diethylene glycol 111-46-6 0.0 5.18 5.18
Sodium Hydroxide 1310-73-2. 0.0 0.44 0.44
TG Urea 57-13-6 0.0 2.42 2.42
PHOSPHORIC ACID
7664-38-2. 0.0 0.44 0.44
Formaldehyde 50-00-0 0.0 5.68 5.68
8 Heliz.Binder CFF
- - -
Luprintol Emuls PE 136132-73-5 0.0 0.45 0.45
Heliz Binder Tow 111-46-6 0.0 8.3 8.3
TRI ALCHOHOL 3 EO MOLE
068131-40-8 0.0 0.35 0.35
9 Kieralon Antiper FB-PK
- - -
Sodium Carbonate 497-19-8 0.0 0.08 0.08
Sodium Thiosulp Pentahydrate
10102-17-7 0.0 9.02 9.02
10 Kieralon Antiper X-CP
- - -
Sodium Chloride 7647-14-5 0.0 3.8 3.8
OXY-GONE T400 Mixture of 9001-05-2 7647-14-5 61-32-04-3 13472-35-0
0.0 0.9 0.9
PROXEL XL 2 2634-33-5 0.0 0.02 0.02
11 Kieralon Desize HP
- - -
Aquazym Ultra 9000-90-2 0.0 0.8 0.8
Sorbitol solution 50-70-4 0.0 2.0 2.0
Proxel XL. 2634-33-5 0.0 0.02 0.02
12 Kieralon Wash F-ALB
- - -
BUTYLDIGLYCOL 112-34-5 0.0 2.1 2.1
SEQUCEL HD (DEQUEST 2010)
2809-21-4 0.0 1.5 1.5
TRI ALCHOHOL 5 ED MOLE
9043-30-5 0.0 4.5 4.5
TEGO Antifoam 793
556-67-2 0.0 0.15 0.15
Isopropanol 67-63-0 0.0 0.9 0.9
Lutensol Tex XP 50 160875-66-1 0.0 12.0 12.0
13 Kieralon Wash F-ALB Plus
- - -
Amkal NX 27213-90-7 0.0 0.05 0.05
FATTY ALCOHOL 6 EO
68002-97-1. 0.0 1.5 1.5
Lutensol XP 80 160875-66-1 0.0 2.0 2.0
TEGO Antifoam 556-67-2 0.0 0.06 0.06
14
793
14 Kieralon F-ALB Plus
- - -
Lutensol XP 80 160875-66-1 0.0 1.5 1.5
Lutensol TO 8 69011-36-5 0.0 1.5 1.5
Lutensol TO 6 69011-36-5 0.0 1.0 1.0
Hansa AFC 5060 SP
0.0 0.08 0.08
15 Kieralon Wash JET-B
- - -
TEGO Antifoam 793
0.0 0.06 0.06
Amkal NX 27213-90-7 0.0 0.05 0.05
FATTY ALCOHOL 6 EO
68002-97-1. 0.0 1.5 1.5
Lutensol XP 80 160875-66-1 0.0 2.0 2.0
16 Kieralon Wash FB-OL New
- - -
Amkal NX 25KG 27213-90-7 0.0 0.1 0.1
FATTY ALCOHOL 6 EO
68002-97-1. 0.0 6.5 6.5
17 Kieralon Wash FB-OLS New
- - -
Lutensol TO 6 69011-36-5 0.0 4.5 4.5
Amkal NX 27213-90-7 0.0 0.08 0.08
18 Kieralon Wash FB-XC-J Conc.
- - -
TEGO Antifoam 793
556-67-2 0.0 0.08 0.08
Lutensol Tex XL 160875-66-1 0.0 8.0 8.0
19 Kieralon Wash JET-B Conc.
- - -
Pluriol P 2000 25322-69-4 0.0 1.0 1.0
TEGOSIPON 3062 67674-67-3 0.0 0.2 0.2
TRI ALCHOHOL 5 ED MOLE
9043-30-5 0.0 5.5 5.5
Isopropanol 67-63-0 0.0 0.1 0.1
TRI ALCOHOL 3 EO MOLE
068131-40-8 0.0 2.3 2.3
20 Kieralon Wash MFB
- - -
Plurafac LF 431 168255-97-8 0.0 4.0 4.0
Neol Neopentylglycol Solution 90%_ALT bu
126-30-7 0.0 1.8 1.8
Sokalan CP 12 S 110-16-7 0.0 2.0 2.0
SEQUCEL HD (DEQUEST 2010)
2809-21-4 0.0 1.2 1.2
15
Lutensol AO 5 64425-86-1 0.0 5.0 5.0
Lutensol AO 7 64425-86-1 0.0 3.8 3.8
21 Lufibrol Extr CP
- - -
Na gluconate (M1154)
527 -07-1 0.0 3.0 3.0
ACTICIDE MV 55965-84-9 0.0 0.04 0.04
Citric Acid 77-92-9 0.0 3.0 3.0
Aquacid 105 Ex 2809-21-4 0.0 3.0 3.0
22 Lufibrol Extr SE
- - -
Sokalan CP 12 S 110-16-7 0.0 1.97 1.97
Potassium Hydroxide
1310-58-3 0.0 0.43 0.43
Trilon M lq. 164462-16-2 0.0 4.99 4.99
23 Lufibrol Extr MSD
- - -
NTA SOLID 97% 139-13-9 0.0 0.6 0.6
NTA TRISOD SALT PDR
5064-31-3 0.0 1.8 1.8
Potassium Hydroxide
1310-58-3 0.0 0.7 0.7
Sokalan CP 12 S 110-16-7 0.0 2.0 2.0
24 Perapret Add F-PEB
- - -
Lutensol TO 8 69011-36-5 0.0 4.69 4.69
SAVOX BW 300 68441-17-8 0.0 13.44 13.44
Potassium Hydroxide
1310-58-3 0.0 0.35 0.35
25 Perapret Add TX 2517
- - -
Wacker Finish CT 54 E
69011-36-5 0.0 0.4 0.4
Lutensol TO 8 69011-36-5 0.0 0.2 0.2
Perapret Add F-PEB
Mixture of 69011-36-5 1310-58-3 7732-18-5
0.0 9.0 9.0
26 Prestogen Stab D
- - -
Trilon C Lq. 140-01-2 0.0 10.7 10.7
Dekol Dis SN 9003-04-7 0.0 10.7 10.7
MAGN CHLORO HEX HYD
7786-30-3 0.0 12.8 12.8
Sulphuric acid 7664-93-9 0.0 2.5 2.5
GLUCONIC ACID 526-95-4 0.0 10.7 10.7
DETPMPA (HEPTASODIUM SALT)
Mixture of 22042-96-2 7647-14-5
0.0 10.3 10.3
16
27 Prestogen Stab FB-E
- - -
MAGN CHLORO HEX HYD
7786-30-3 0.0 1.34 1.34
Proxel GXL Mixture of 3634-33-5 25265-71-8 7732-18-5
0.0 0.04 0.04
Sulphuric acid 7664-93-9 0.0 0.08 0.08
GLUCONIC ACID 526-95-4 0.0 0.76 0.76
DETPMPA (HEPTASODIUM SALT)
Mixture of 22042-96-2 7647-14-5
0.0 1.9 1.9
28 Prestogen Stab FB-PL
- - -
Proxel GXL Mixture of 3634-33-5 25265-71-8 7732-18-5
0.0 0.02 0.02
MAGN CHLORO HEX HYD
7786-30-3 0.0 0.7 0.7
Sulphuric acid 7664-93-9 0.0 0.04 0.04
GLUCONIC ACID 526-95-4 0.0 0.4 0.4
DETPMPA (HEPTASODIUM SALT)
Mixture of 22042-96-2 7647-14-5
0.0 1.0 1.0
29 Primasol Deaer NF
- - -
Primasol NF 100 4971-47-5 0.0 4.51 4.51
Ammonia 1336-21-6 0.0 0.78 0.78
30 Primasol Deaer NF New
- - -
PHOSPHOROUS PENTOXIDE
1314-56-3 0.0 7.07 7.07
PHOSPHORIC ACID TRIS(2-ETHYLHEXYL) ESTER
78-42-2 0.0 2.8 2.8
Lutensol XA 40 166736-08-9 0.0 2.8 2.8
Solvenon DPM 34590-94-8 0.0 4.55 4.55
Lutensol Tex AO 7 157627-86-6 0.0 1.12 1.12
Ammonia 1336-21-6 0.0 8.05 8.05
2-ETHYL-HEXANOL
104-76-7 0.0 19.18 19.18
31 Rongalit Dcharge ST Lq.
- - -
Sodium Formaldehyde Sulfoxylate
149-44-0 0.0 40.0 40.0
17
Ammonia 1336-21-6 0.0 5.84 5.84
32 Siligen Soft FB-NCE
- - -
Product NF 100 190454-07-0 0.0 3.2 3.2
Proxel GXL Mixture of 3634-33-5 25265-71-8 7732-18-5
0.0 0.04 0.04
33 Siligen Soft SIH
- - -
Lutensol TO 8 69011-36-5 0.0 0.8 0.8
Wetsoft NE 820 112-34-5 0.0 3.8 3.8
Wetsoft NE 810 112-34-5 0.0 11.3 11.3
TRI ALCHOHOL 5 ED MOLE
9043-30-5 0.0 2.2 2.2
34 Siligen Soft SIS
- - -
Lutrol E 400 25322-68-3 0.0 0.6 0.6
Lutensol TO 8 69011-36-5 0.0 0.48 0.48
Wacker Finish WR-301 CN
Mixture of 102782-92-3 556-67-2 209-136-7
0.0 2.9 2.9
Acetic acid 64-19-7 0.0 0.06 0.06
TRI ALCHOHOL 5 ED MOLE
9043-30-5 0.0 1.24 1.24
35 Siligen Soft TX HQS
- - -
BUTYLDIGLYCOL 112-34-5 0.0 1.0 1.0
Tegopren 6924 0.0 2.4 2.4
Lutensol TO 8 69011-36-5 0.0 0.2 0.2
Lutensol TO 5 69011-36-5 0.0 0.5 0.5
Acetic acid 64-19-7 0.0 0.02 0.02
36 Uniperol Buffer PC
- - -
Decaltal Pic S 68603-87-2 0.0 0.44 0.44
Citric Acid, monohydrate
5949-29-1 0.0 8.76 8.76
37 Uniperol Buffer TX P-DP
- - -
Formic Acid 64-18-6 0.0 3.0 3.0
Decaltal Pic S 68603-87-2 0.0 0.2 0.2
Citric Acid, monohydrate
5949-29-1 0.0 3.0 3.0
ACTICIDE MV 55965-84-9 0.0 0.04 0.04
38 Uniperol Level RD
- - -
Dekol Dis SN 9003-04-7 0.0 10.0 10.0
Sokalan CP 12 S 110-16-7 0.0 1.5 1.5
18
Sodium Hydroxide 1310-73-2. 0.0 0.8 0.8
Aquacid 1067 EX 22042-96-2 0.0 6.6 6.6
39 Uniperol Level SE
- - -
Formic Acid 64-18-6 0.0 0.01 0.01
Igesol HS-30 0.0 0.1 0.1
KATARANG SD 67762-27-0 0.0 4.8 4.8
NOIGEN 13001-LIQUID
68439-49-6 0.0 5.2 5.2
NOIGEN SA 10 26635-92-7 0.0 5.0 5.0
40 Uniperol Level SF ECO
- - -
DIPROP GLYC (RM)
25265-7-8 0.0 6.0 6.0
TRI ALCHOHOL 5 ED MOLE
9043-30-5 0.0 1.0 1.0
Oleic acid ethoxylated (4,7 EO)
9004-96-0 0.0 3.0 3.0
Castor Oil ethoxylated (47 EO)
8001-79-4 0.0 4.0 4.0
TURKEY RED OIL 70%
8002-33-3 0.0 0.2 0.2
41 Tamol FB LI - - -
Crude Naphthalene 91-20-3 0.0 7.64 7.64
Sulphuric acid 7664-93-9 0.0 8.06 8.06
Formaldehyde 50-00-0 0.0 3.2 3.2
Sodium Hydroxide 1310-73-2. 0.0 8.3 8.3
42 Tamol M (REF)
- - -
Refined Naphthalene
91-20-3 0.0 11.46 11.46
Sulphuric acid 7664-93-9 0.0 12.09 12.09
Formaldehyde 50-00-0 0.0 5.7 5.7
Sodium Hydroxide 1310-73-2. 0.0 12.45 12.45
43 Tamol NNOL - - -
Phenol 108-95-2 0.0 8.64 8.64
Sulphuric acid 7664-93-9 0.0 10.75 10.75
TG Urea 57-13-6 0.0 5.9 5.9
Formaldehyde 50-00-0 0.0 12.32 12.32
Sodium Hydroxide 1310-73-2. 0.0 21.5 21.5
Sulphuric acid 7664-93-9 0.0 1.5 1.5
Metaclaw CL liq 64-02-8 0.0 0.25 0.25
44 Tamol XNL - - -
Decaltal PIC A Micture of 124-04-9 1132-18-5
0.0 2.75 2.75
Acetic acid 64-19-7. 0.0 4.0 4.0
Sodium Hydroxide 1310-73-2. 0.0 7.89 7.89
19
PEG 200 (Pluriol E200)
25322-68-3 0.0 1.84 1.84
Sorbitol solution 50-70-4 0.0 2.74 2.74
Sodium bisulphite 7631-90-5 0.0 0.4 0.4
45 Relugan D / DI - - -
Sodium bisulphite 7631-90-5 0.0 10.15 10.15
Formaldehyde 50-00-0 0.0 9.8 9.8
Tamol M Mixture of 124-04-9 1132-18-5 1310-73-2 50-70-4
0.0 16.1 16.1
Melamine 108-78-1 0.0 2.45 2.45
TG Urea 57-13-6 0.0 11.55 11.55
Formaldehyde 50-00-0 0.0 9.1 9.1
46 Relugan SLF / DLF
- - -
Formaldehyde 50-00-0 0.0 23.77 23.77
Sodium Hydroxide 1310-73-2. 0.0 0.07 0.07
TG Urea 57-13-6 0.0 7.7 7.7
Sodium bisulphite 7631-90-5 0.0 21.0 21.0
Formic acid 64-18-6 0.0 0.18 0.18
Sodium Hydroxide 1310-73-2. 0.0 2.1 2.1
Alkaline DX solution 29405-16-1 0.0 30.24 30.24
Decaltal PIC 68603-87-2 0.0 0.53 0.53
Sodium sulphate 7757-82-6 0.0 2.8 2.8
47 Basyntan AN - - -
Phenol 108-95-2 0.0 3.38 3.38
Sulphuric acid 7664-93-9 0.0 4.12 4.12
TG Urea 57-13-6 0.0 2.16 2.16
Formaldehyde 50-00-0 0.0 3.34 3.34
Sodium Hydroxide 1310-73-2. 0.0 4.0 4.0
AN- Condensate 117985-54-3 0.0 14.02 14.02
Formaldehyde 50-00-0 0.0 0.68 0.68
Formic acid 64-18-6 0.0 0.55 0.55
Sodium sulphate 7757-82-6 0.0 0.8 0.8
48 Basyntan ANF - - -
Phenol 108-95-2 0.0 2.12 2.12
Sulphuric acid 7664-93-9 0.0 2.7 2.7
TG Urea 57-13-6 0.0 1.38 1.38
Formaldehyde 50-00-0 0.0 2.1 2.1
Sodium Hydroxide 1310-73-2. 0.0 0.8 0.8
Ammonia 1336-21-6 0.0 0.6 0.6
Sodium Hydroxide 1310-73-2. 0.0 1.0 1.0
Sodium bisulphite 7631-90-5 0.0 2.4 2.4
Formaldehyde 50-00-0 0.0 1.83 1.83
Aniline 62-53-3 0.0 0.45 0.45
Melamine 108-78-1 0.0 0.18 0.18
TG Urea 57-13-6 0.0 0.3 0.3
20
Formaldehyde 50-00-0 0.0 0.92 0.92
Formic acid 64-18-6 0.0 0.05 0.05
Relugan AME 0.0 6.2 6.2
49 Basyntan AN Condensate
- - -
Sodium metabisulphite
007681-57-4 0.0 8.0 8.0
Formaldehyde 50-00-0 0.0 5.77 5.77
Sodium Hydroxide 1310-73-2. 0.0 0.3 0.3
Aniline 62-53-3 0.0 1.34 1.34
Melamine 108-78-1 0.0 0.55 0.55
TG Urea 57-13-6 0.0 0.9 0.9
Formaldehyde 50-00-0 0.0 1.58 1.58
50 Basyntan DLE - - -
Phenol 108-95-2 0.0 3.6 3.6
Sulphuric acid 7664-93-9 0.0 4.29 4.29
TG Urea 57-13-6 0.0 2.49 2.49
Formaldehyde 50-00-0 0.0 5.89 5.89
Sodium Hydroxide 1310-73-2. 0.0 0.71 0.71
Phenol 108-95-2 0.0 2.39 2.39
Metaclaw CL liq 64-02-8 0.0 0.1 0.1
Formaldehyde 50-00-0 0.0 1.63 1.63
Sodium Hydroxide 1310-73-2. 0.0 3.5 3.5
Decaltal PIC A Micture of 124-04-9 1132-18-5
0.0 0.8 0.8
Sulphuric acid 7664-93-9 0.0 0.05 0.05
Sodium hydro sulfite
7775-14-6 0.0 0.01 0.01
51 Basyntan DX - - -
Phenol 108-95-2 0.0 5.18 5.18
Sulphuric acid 7664-93-9 0.0 6.45 6.45
TG Urea 57-13-6 0.0 3.54 3.54
Formaldehyde 50-00-0 0.0 7.39 7.39
Sodium Hydroxide 1310-73-2. 0.0 11.4 11.4
Sulphuric acid 7664-93-9 0.0 0.9 0.9
52 Basyntan FB DI
- - -
Phenol 108-95-2 0.0 5.4 5.4
Sulphuric acid 7664-93-9 0.0 6.44 6.44
TG Urea 57-13-6 0.0 3.68 3.68
Formaldehyde 50-00-0 0.0 8.83 8.83
Sodium Hydroxide 1310-73-2. 0.0 1.07 1.07
Phenol 108-95-2 0.0 3.6 3.6
Metaclaw CL liq 64-02-8 0.0 0.15 0.15
Formaldehyde 50-00-0 0.0 2.48 2.48
Sodium Hydroxide 1310-73-2. 0.0 5.25 5.25
21
Decaltal PIC A Micture of 124-04-9 1132-18-5
0.0 1.73 1.73
Pthalic anhydride 85-44-9 0.0 0.9 0.9
Formic acid 64-18-6 0.0 0.9 0.9
Sodium sulphate 7757-82-6 0.0 1.95 1.95
FBL 1 0.0 10.8 10.8
53 Basyntan FB. P
- - -
Phenol 108-95-2 0.0 7.5 7.5
Sodium Hydroxide 1310-73-2. 0.0 0.53 0.53
Formaldehyde 50-00-0 0.0 7.65 7.65
Sodium bisulphite 7631-90-5 0.0 2.1 2.1
TG Urea 57-13-6 0.0 1.2 1.2
Sodium bisulphite 7631-90-5 0.0 1.2 1.2
DLE solution 68603-87-2 0.0 24.0 24.0
Metaclaw CL liq 64-02-8 0.0 0.3 0.3
Decaltal PIC A Micture of 124-04-9 1132-18-5
0.0 1.65 1.65
Sodium sulphate 7757-82-6 0.0 1.5 1.5
Sulphuric acid 7664-93-9 0.0 0.6 0.6
Sodium sulphate 7757-82-6 0.0 3.9 3.9
54 Basyntan XA - - -
Phenol 108-95-2 0.0 5.4 5.4
Sulphuric acid 7664-93-9 0.0 6.44 6.44
TG Urea 57-13-6 0.0 3.73 3.73
Formaldehyde 50-00-0 0.0 8.83 8.83
Sodium Hydroxide 1310-73-2. 0.0 1.07 1.07
Phenol 108-95-2 0.0 3.59 3.59
Metaclaw CL liq 64-02-8 0.0 0.15 0.15
Formaldehyde 50-00-0 0.0 2.44 2.44
Sodium Hydroxide 1310-73-2. 0.0 5.25 5.25
Sodium hydro sulfite
7775-14-6 0.0 0.02 0.02
C. Floating agents
Pluronic PE-10100 9003-11-6 0.0 28.5 28.5
Escaid 110 64742-47-8 0.0 28.5 28.5
Oxooil 9N 68526-89-6. 0.0 3.0 3.0
D. Spray Drying, formulation and Packing of Water Treatment Chemicals & Paper Dyes (Sokalan, Magnafloc, Pergasol & Irgalite)
Magnafloc LT / Magnafloc LT7991
42751-79-1 0.0 310.0 310.0
22
1.4 Water Requirement, Waste Water Generation and Treatment Total water requirement will be 500 m
3/day which will be met through GIDC water supply. The
wastewater generation will be 220 m3/day. The industrial effluent (185 m
3/day) is treated into ETP
consists of primary treatment facility & Multiple Effect Evaporator and domestic waste water (35
m3/day) is also sent to septic tank & soak pit and then sent to ETP. Treated effluent along with
domestic waste water are discharged into GIDC underground drainage system and conveyed to
FETP of NCT for further treatment & final disposal into deep sea.
No Effluent load will be increased after proposed expansion.
1.5 Air Pollution Source and Control Management
There will be emission from Boiler, Hot Air Generator, D.G. Sets and Process Vents. To control the emission from process vents, adequate scrubbers, Bag Filter are installed.
12
1.6 Hazardous Waste
Sr. No.
Name of Hazardous Waste
Schedule Catg. Quantity in MT/Annum
Storage / Disposal Existing Additional Total
1 Process Waste
Sludge/Residue
Containing Acid,
Toxic Metals,
Organic compounds
I 26.1 308 0 308 Organic waste from MEE Conc and Hyflow waste from process: Disposal by incineration in common incinerator facility such as BEIL/GSPL/SEPPL or co-processing by giving to RSPL
2 Spent carbon I 28.3
5 0 5 Disposal by incineration in common incinerator facility such as BEIL / GSPL/SEPPL or co-processing in Cement industries or by
giving to RSPL
3 Off Specification
Products
I 28.4 50 50 100 Disposal by incineration in common incinerator facility such as BEIL / GSPL/SEPPL or co-processing in Cement industries or by
giving to RSPL
4 Empty barrels
/containers/liners
Contaminated with
hazardous
chemicals /wastes
I 33.1 40.4 19.6 60 Non-Recyclable Plastic waste & used PPE,
Filter Plates, Cloths, Cartridges, waste insulation materials, broken glass ware: Disposal by send to authorized TSDF such as BEIL/SEPPL
5 Empty barrels
/containers/liners
Contaminated with
hazardous
chemicals /wastes
I 33.1 230 220 450 Disposal by send it to authorized decontamination facility / recycler or reuse or send back to supplier
6 Chemical sludge
from waste
water treatment
I 35.3 3000 0 3000 MEE Salt: Disposal by selling it to authorized end user or disposal at TSDF (BEIL/SEPPL).
7 Chemical sludge
from waste
water treatment
I 35.3 1800 200 2000 ETP waste disposal by send to authorized TSDF such as BEIL/SEPPL.
13
8 Used or Spent Oil I 5.1 10 5 15 Disposal by Reuse in plant & machinery as lubricant or sell it to authorized re-refiners / recycler.
9 E-waste -- -- 10 0 10 E-waste disposal by sell it to GPCB authorized recycler.
10 Spent ion exchange Resin
I 35.2 0 25 25 Spent ion exchange resin from waster softening/DM plant: Disposal by sending to TSDF of M/s. BEIL, Ankleshwar / SEPPL or send back to supplier.
14
1.7 Green Belt
Total 30,829.29 sq. meter land area is available at site; out of this area about 2,047. 28 sq. meter
(6.64 %) area is covered as greenbelt and other forms of greenery.
1.8 Power & Fuel Requirements
SR. NO.
NAME OF FUEL EXISTING
QUANTITY
PROPOSED
QUANTITY TOTAL QUANTITY
1. Diesel 800 lit/day - 800 lit/day
2. LDO 100 lit/day - 100 lit/day
3. Natural Gas 5,000 SM3/ Hrs. - 5,000 SM
3/ Hrs.
4. LDO / Furness OIL
(FO) *
20 KL / Day - 20 KL / Day
5. Electricity 4651 KW 1349 KW 6000 KW
2.0 INTRODUCTION OF THE PROJECT/BACKGROUND INFORMATION
2.1 Identification of the project and project proponent. In case of mining project, a copy of
mining lease/letter of intent should be given.
Identification of the project
PROPOSED EXPANSION OF OPTICAL WHITENING AGENT / OPTICAL BRIGHTENER AND
TEXTILE & LEATHER CHEMICALS IN EXISTING UNIT
15
Identification of the project proponent
16
2.2 Brief description of nature of the Project
PROPOSED EXPANSION OF OPTICAL WHITENING AGENT / OPTICAL BRIGHTENER AND
TEXTILE & LEATHER CHEMICALS IN EXISTING UNIT
2.3 Need for the project and its importance to the country and or region
The demand for products intended to be manufacture is increasing in the country. By expanding this
unit M/s. BASF India Ltd. (Unit-I) will be able to meet the demand of various products locally. The
project will save forex as certain products import will be reduced. This will also generate direct and
indirect employment opportunity for various levels of people.
2.4 Demands-Supply Gap
Based on our informal survey of the market with our current customers and various traders, we have
found that there is a big potential for the range of the products we are planning. These products will
be an addition to the current range of our products.
2.5 Imports vs. Indigenous production
Based on the current cost of indigenous raw materials and the non-availability of some materials, we
will have to import some of the key raw materials as they are not available indigenously. This will
make us very competitive against imported finished products and we will export of our finished
products to the international markets.
2.6 Export possibility
We shall explore the possibility to increase export of the products.
2.7 Domestic/Export Markets
Our products have good demand in international markets. We shall also export the products.
2.8 Employment Generation (Direct and Indirect) due to project.
M/s. BASF India Limited (Unit-I) will give direct employment to around 50 additional local people
based on qualification and requirement. In addition to direct employment, indirect employment shall
generate ancillary business to some extent for the local population.
17
3.0 Project Description
3.1 Type of Project including interlinked and interdependent projects, if any.
No interlinked project has been submitted.
3.2 Location (map showing general location, specific location and project boundary & project
site layout) with coordinates.
• Map showing general location
18
•
19
Plot Layout
20
3.3 Details of alternate sites considered and the basis of selecting the proposed site,
particularly the environmental considerations gone into should be highlighted.
Major factors involved in the selection of site are listed below:
• Existing operational unit
• Site is very well connected by road
• Proximity to Raw Material suppliers
• Availability of sufficient land free from cultivation
• Availability of power evacuation facilities
• Availability of water for industrial use
• Availability of common CHWIF, TSDF, CMEE, etc. in the estate
• Treated wastewater discharge into deep sea facility
Modern infrastructure support and amenities at par with industrial estates in other global markets,
including:
� Efficient transport facilities within the industrial estate and to & fro the city area.
� Environment-friendly zone.
� Uninterrupted power supply.
3.4 Size or Magnitude of Operation
Please refer Section-1.2.1, Page No. 2.
3.5 Project Description with process details (a schematic diagram/flow chart showing the
project layout, components of the project, etc. should be given)
Please refer Please refer Form-I, Annexure-III.
3.6 Raw Material required along with estimated quantity, likely source, marketing area of final
product/s, mode of transport of raw material and Finished product.
For raw material required along with quantity; Please refer Section-1.3, Page No. 3.
We shall procure the raw material as much as possible from domestic market and if there is no
availability of any raw material we will import. We shall export the finished products.
3.7 Resource optimization/recycling and reuse envisaged in the project, if any, should be
briefly outlined.
After expansion, every effort will put to recycle/reuse the water.
3.8 Availability of water its source, energy/power requirement and source should be given.
Water Source
Total water requirement shall be met through GIDC water supply.
21
Power & Fuel Requirement
SR. NO.
NAME OF FUEL EXISTING
QUANTITY
PROPOSED
QUANTITY TOTAL QUANTITY
1. Diesel 800 lit/day - 800 lit/day
2. LDO 100 lit/day - 100 lit/day
3. Natural Gas 5,000 SM3/ Hrs. - 5,000 SM
3/ Hrs.
4. LDO /Furness OIL
(FO) *
20 KL / Day - 20 KL / Day
5. Electricity 4651 KW 1349 KW 6000 KW
3.9 Quantity of wastes to be generated (liquid and solid) and scheme for their
management/disposal.
Please refer Form-I, Annexure-V & VI.
3.10 Schematic representations of the feasibility drawing which give information of EIA
purpose.
RECONNAISSANCE SURVEY OF EXISTING PLANT ANNUAL REPORT
MARKET ASSESSMENT
FINANCIAL REPORT
PROJECT REPORT
INTRODUCTION
MONITORING OF AIR, WATER & SOIL QUALITY & NOISE
LEVELS. DATA ON METEOROLOGY SOCIO-ECONOMIC STATUS
& BASIC AMENITIES. SITE VISITS BY AND INTERVIEWS WITH
LOCALS
BASELINE
ENVIRONMENTAL
STATUS
ENVIRONMENTAL INFORMATION CENTRE
CENTRAL GROUND WATER BOARD
GUJARAT POLLUTION CONTROL BOARD (GPCB)
PUBLIC HEALTH ENGINEERING DEPT.
AGRICULTURE DEPARTMENT
FOREST DEPARTMENT
IRRIGATION DEPARTMENT
EMPLOYMENT EXCHANGE
HEALTH CENTER
CENSUS DEPT.
INDIAN METEOROLOGICAL DEPT.
SOCIOECONOMIC
STATUS &
INFRASTRUCTURE
PROPOSED EXPANSION
PLANT
FACILITY DESCRIPTION
IMPACTS
METHODOLOGY OF
IMPACT
ASSESSMENT
IDENTIFICATION & ASSESSMENT OF IMPACTS
EVALUATION OF IMPACTS BY MATRIX METHOD
SOURCE OF INFORMATION OVERVIEW OF
E. I. A. STUDIES
ACTIVITIES
ENVIRONMENTAL
MANAGEMENT PLAN
DESCRIPTION OF EFFLUENT TREATMENT PLAN, AIR
POLLUTION CONTROL, HAZARDOUS WASTE MANAGEMENT,
GREEN BELT DEVELOPMENT MONITORING PROGRAM
RISK ANALYSIS
STUDIES &
DISASTER
MANAGEMENT PLAN
SAFETY, HEALTH & ENVIRONMENTAL POLICY, GUIDELINES BY
DIRECTOR GENERAL OF FACTORY SAFETY, MINISTRY OF LABOR. CONSEQUENCE ANALYSIS
PREPARATION OF DISASTER MANAGEMENT PLAN
22
4.0 Site Analysis
4.1 Connectivity
• Site is very well connected by road
• Availability of water, power, etc.
4.2 Land Form, Land Use and Land Ownership
It will be incorporated in EIA Study.
4.3 Existing land use pattern (agriculture, non-agriculture, forest, water bodies (including area
under CRZ)), shortest distances from the periphery of the project to periphery of the forests,
national park, wild life sanctuary, eco sensitive areas, water bodies (distance from HFL of the
river), CRZ. In case of the notified industrial area, a copy of the Gazette notification should be
given.
It will be incorporated in EIA Study. CRZ Clearance is not applicable.
4.5 Existing Infrastructure
• Existing operational unit
• Site is very well connected by road
• Availability of sufficient land free from cultivation
• Availability of power evacuation facilities
• Availability of water for industrial use
• Availability of common CHWIF, TSDF, CMEE, etc. in the estate
• Treated wastewater discharge into deep sea facility
4.6 Soil Classification
It will be incorporated in EIA Study.
4.7 Climatic data from secondary sources.
Climatic data from primary & secondary sources will be incorporated in EIA Study.
4.8 Social infrastructure available.
Various Programs/ Projects related to Social & Economic development of surrounded area
has been planned, which are as follows.
A) Natural Resource Management – The main focus of this program will be to maximize the yield
returns of the farmers through efficient management of existing resources & extension of new
agricultural practices.
1) Integrated Agricultural Growth Project – For improvement and use of the modern techniques
and thereby would certainly contribute to prosperity in the agriculture sector and reduce the
23
rural poverty by programs like Farmers Training, Nursery Growing Trainings, Modern
agriculture equipment distribution programs etc.
2) Animal Husbandry Projects – Various programs like health checkups & treatment,
vaccination program, Anti sterility camps, breed improvement etc. will be carried out.
B) Income Generation Program -
1) Establishment of Self help groups.
2) Rural Entrepreneurship Development Program
3) Handcrafts Development Program
4) Vocational Training
5) Business process outsourcing
C) Health, Education & Infrastructure
1) Aids Awareness Program
2) General Health Camps
3) Innovative Teaching Methods
4) Adult Education
5) Sanitation
6) Infrastructure Development Projects
5.0 Planning Brief
5.1 Planning Concept (type of industries, facilities, transportation etc) Town and Country
planning/Development authority classification.
Type of Industry: PROPOSED EXPANSION OF OPTICAL WHITENING AGENT / OPTICAL
BRIGHTENER AND TEXTILE & LEATHER CHEMICALS IN EXISTING UNIT.
5.2 Population Projection
It will be incorporated in EIA Study.
5.3 Land use planning (breakup along with green belt, etc.)
It will be incorporated in EIA Study.
5.4 Assessment of Infrastructure Demand (Physical & Social)
• Employment would be as per prevailing norms of state government for skilled and unskilled
people for the proposed project activity.
• Social Welfare
• Cordial relation with the industry shall be established and representation shall be made to
villagers for help for creation of facilities related to health, education, etc.
24
5.5 Amenities/Facilities
It will be incorporated in EIA Study.
6.0 Proposed Infrastructure
6.1 Industrial Area (Processing Area)
Processing Area (Plant facilities, R&D, ETP Area and Engineering / Utility Services, Work Shop) =
13,770.66 m2
6.2 Residential Area (Non Processing Area)
Non Processing Area (Green belt, Raw material storage area, finished storage area, Administration
Building, Parking, road and open area) = 17,058.63 m2
6.3 Green Belt
Total 30,829.29 sq. meter land area is available at site; out of this area about 2,047. 28 sq. meter
(6.64 %) area is covered as greenbelt and other forms of greenery.
6.4 Social Infrastructure
• Water Supply by GIDC
• Power supply by DGCVL
6.5 Connectivity (Traffic and Transportation Road/ Rail/Metro/ Water ways, etc.)
Major factors involved in the selection of site are listed below:
• Existing operational unit
• Site is very well connected by road
• Proximity to Raw Material suppliers
• Availability of sufficient land free from cultivation
• Availability of power evacuation facilities
• Availability of water for industrial use
• Availability of common CHWIF, TSDF, CMEE, etc. in the estate
• Treated wastewater discharge into deep sea facility
Modern infrastructure support and amenities at par with industrial estates in other global markets,
including:
� Efficient transport facilities within the industrial estate and to & fro the city area.
� Environment-friendly zone.
� Uninterrupted power supply.
6.6 Drinking water Management (Source & Supply of water)
Total water requirement shall be met through GIDC supply.
25
6.7 Sewerage System
Sewage pipes are laid in entire company for the removal and disposal of mainly non-harmful liquid
wastes from the offices, canteen and domestic waste coming from different section of industry. These
liquid wastes are sent to septic tank & soak pit/ETP.
6.8 Solid Waste Management
Please refer Form-I, Annexure-VI. 6.9 Power Requirement & Supply/Source
Please refer Section 3.8 of this report.
7.0 Rehabilitation and Resettlement (R & R) Plan
7.1 Policy to be adopted (central/state) in respect of the project affected including home
ousters, land ousters and landless laborers (a brief outline to be given)
There is no habitation on the proposed expansion project activity area and it is open industrial land,
so R & R policy is not applicable to this project.
There shall not be displacement of any population in project area. Any major activity that may lead to
resettlement of the people is considered as permanent impact. Hence, there is no permanent impact
on this account. The increasing industrial activity will boost the commercial and economical status of
the locality up to some extent.
8. Project Schedule & Cost Estimates
8.1 Likely date of start of construction and likely date of completion (Time schedule for the
project to be given).
We shall start construction after getting EC & CTE. And we shall start manufacturing after applying for
CCA.
8.2 Estimated Project cost along with analysis in terms of economic viability of the project.
Existing Site Cost = Rs. 32.98 Crores
Proposed Project Cost = Rs. 2.0 Crores
9. Analysis of Proposal (Final Recommendations)
9.1 Financial and social benefits with special emphasis on the benefit to be local people
including tribal population, if any, in the area.
• Employment would be as per prevailing norms of state government for skilled and unskilled
people for the proposed project.
• Social Welfare shall be done.
• Cordial relation with the industry shall be established and representation shall be made to
villagers for help for creation of facilities related to health, education, etc.