Universidad Tecnológica del Valle de Toluca Nombre de la Práctica: Práctica 5 “Diseño de una Red 1 Parte” Fecha de la práctica: 12-02-2015 Nombre y matricula de la alumna: Karla Guadalupe Cárcamo Jiménez 221110300 Asignatura: Redes Convergentes Profesor: ISE Raúl García Grupo: ITIC-83
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Universidad Tecnológica del Valle de Toluca
Nombre de la Práctica:
Práctica 5
“Diseño de una Red 1 Parte”
Fecha de la práctica:
12-02-2015
Nombre y matricula de la alumna:
Karla Guadalupe Cárcamo Jiménez 221110300
Asignatura:
Redes Convergentes
Profesor:
ISE Raúl García
Grupo: ITIC-83
Objetivos
Parte 1: Crear 5 subredes (Toluca,D.F,Monterrey,Guadalajara,Guanajuato) cada una debe tener su direccion IP,direccion de brodcast,su mascara de subred
Paso 2: Cuantos dispositivos se pueden conectar en cada ciudad y rango de ip’s disponibles
Parte 3: Crear una VLAN para cada ciudad en el switch principal
Parte 4: Conectar un switch para cada ciudad
Parte 5: Asignarle direccion ip a las PC’s
Topologia
Desarrollo de práctica
Parte 1: Crear 5 subredes (Toluca,D.F,Monterrey,Guadalajara,Guanajuato) cada una debe tener su direccion IP,direccion de brodcast,su mascara de subred
Estas son las direcciones que necesitaras para cada uno de los dispositivos [switch]
Paso 2: Cuantos dispositivos se pueden conectar en cada ciudad y rango de ip’s disponibles
- Los dispositivos que se pueden conectar en cada ciudad serian 6
- Los rangos de las ip’s son:
NOMBRE RANGO DISPONIBLES
TOLUCA 150.81.10.1 a 6
DF 150.81.10.9 a 14
MONTERREY 150.81.10.17 a 22
GUADALAJARA 150.81.10.25 a 30
GUANAJUATO 150.81.10.33 a 38
Parte 3: Crear una VLAN para cada ciudad en el switch principal
Paso1: crear VLAN del switch1 con el nombre (Toluca) numero 20
Switch>enable Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 20 name Toluca VLAN 20 added: Name: Toluca Switch(vlan)#exit APPLY completed. Exiting.... Switch#
Paso2: crear VLAN del switch1 con el nombre (DF) numero 40
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#vlan 40 name DF
VLAN 40 added:
Name: DF
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#
Paso3: crear VLAN del switch1 con el nombre (Monterrey) numero 60
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#vlan 60 name Monterrey
VLAN 60 added:
Name: Monterrey
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#exit
Paso4: crear VLAN del switch1 con el nombre (Guadalajara) numero 80
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#vlan 80 name Guadalajara
VLAN 80 added:
Name: Guadalajara
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#
Paso5: crear VLAN del switch1 con el nombre (Guanajuato) numero 100
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#vlan 100 name Guanajuato
VLAN 100 added:
Name: Guanajuato
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#
Parte 4: Conectar un switch para cada ciudad
Paso 1: ciudad Toluca
Switch>enable Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 20 name Toluca VLAN 20 modified: Name: Toluca Switch(vlan)#exit APPLY completed. Exiting.... Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#interface fa0/1 Switch(config-if)#switchport access vlan 20 Switch(config-if)#exit Switch(config)#exit Switch# %SYS-5-CONFIG_I: Configured from console by console Switch#
Paso2: cuidad DF
Switch>enable Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 40 name DF VLAN 40 added: Name: DF Switch(vlan)#exit APPLY completed. Exiting.... Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#interface fa0/2 Switch(config-if)#switchport access vlan 40 Switch(config-if)#exit Switch(config)#exit Switch# %SYS-5-CONFIG_I: Configured from console by console
Paso3: ciudad Monterrey
Switch>enable Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 60 name Monterrey VLAN 60 added: Name: Monterrey Switch(vlan)#exit APPLY completed. Exiting.... Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#interface fa0/3 Switch(config-if)#switchport access vlan 60 Switch(config-if)#exit Switch(config)#exit Switch# %SYS-5-CONFIG_I: Configured from console by console
Paso4: ciudad de Guadalajara
Switch>enable Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 80 name Guadalajara VLAN 80 added: Name: Guadalajara Switch(vlan)#exit APPLY completed. Exiting.... Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#interface fa0/4 Switch(config-if)#switchport access vlan 80 Switch(config-if)#exit Switch(config)#exit Switch# %SYS-5-CONFIG_I: Configured from console by console
Paso5: ciudad de Guanajuato
Switch(vlan)#vlan 100 name Guanajuato
VLAN 100 added:
Name: Guanajuato
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface fa0/5
Switch(config-if)#switchport access vlan 100
Switch(config-if)#exit
Switch(config)#exit
Switch#
%SYS-5-CONFIG_I: Configured from console by console
Parte 5: Asignarle direccion ip a las PC’s
Paso1: pc’s de la ciudad Toluca
Recordando que el rango disponible para esta ciudad es de: 150.81.10.1 a 6
PC0 PC1
Paso2: pc’s de la ciudad DF
Recordando que el rango disponible de esta ciudad es de: 150.81.10.9 a 14
PC2 PC3
Paso3: pc’s de la ciudad Monterrey
Recordando que el rango disponible de esta ciudad es de: 150.81.10.17 a 22
PC4 PC5
Paso4: pc’s de la ciudad Guadalajara
Recordando que el rango disponible de esta ciudad es de: 150.81.10.25 a 30
PC6 PC7
Paso5: pc’s de la ciudad Guanajuato
Recordando que el rango disponible de esta ciudad es de: 150.81.10.33 a 38
PC8 PC9
Pruebas Se realizaran pruebas enviando paquetes a las diversas pc’s
Como podemos ver en las imágenes
los paquetes se mandaron
correctamente a sus pc’s
Conclusiones
En esta práctica se realizaron 5 subredes, y cada una de ellas debe tener:
Nombre
Dirección de red
Dirección brodcast
Y su máscara de subred
Es importante saber que rengo disponible tiene cada dirección de red para saber que ip’s se le
asignara a cada pc’s
Sin olvidar que se crearon VLAN para cada una de las ciudades y realizaron pruebas de pc’spara