OILFIELD/PETROCHEMICAL EXPERIENCE PPC assists chemical, metallurgical and industrial plant owners in solving their operational and environmental problems and in planning and executing their capital projects. PPC assists chemical, metallurgical and industrial plant owners in solving their opera- tional and environmental problems and in plan- ning and executing their capital projects. We have functional expertise in testing and problem evaluation, process planning, preliminary engi- neering and cost estimating, process licensing and project management. Specific refining and petrochemical process experience follows: • Operating experience on a MEK/Toluene Lube Oil Solvent Dewaxing Unit for a major refiner. • Process design studies to modify an existing MEK Dewaxing Unit to primarily deoiling ap- plications for a wax-processing refinery. • Crude and Vacuum Unit Design. • Detailed design of Filter House modifications for a wax processing refinery. • Detailed design for tank farm and other off- sites, including new pipe rack and loading rack for a wax refinery. • Process studies for naphtha splitting to achieve optimum balance between reforming and isomerization for octane, maximum ben- zene reduction, overall capacity, etc. • Process design to revamp an existing re- former to operate at low pressure to improve gasoline and hydrogen yield and minimize C1-C4 yield. PPC - Core Fixing and Handling Project Manger Brochure - Al Khafji Joint Operations PROCESS PLANTS CORPORATION PO Box 1966 Cranberry Township PA 16066-0966 (724) 776-5933 Fax (724) 776-5978 http://ppc-site.com OILFIELD/REFINING/PETROCHEMICAL EXPERIENCE Adding or moving a process If you are thinking about expanding or modernizing your existing facility, please consider Process Plants Corpo- ration for assisting you in this task. CORE FX OILFIELD AND RESERVOIR SERVICE SPRING 2010 PPC We provide single point re- sponsibility in performing engi- neering, procurement and con- struction (EPC) for projects. PPC has extensive experience in the petrochemical, organic and non-organic chemicals, powder metal, natural gas, syn- fuel, cement and co-generation fields. PPC delivers engineering services and products to process industries including manufacturing, chemical, petrochemical, and power generation industries. We work with our clients to deliver cost- effective and sustainable solutions through state-of-the-art tech- nologies and industry leading expertise.
5
Embed
PPC - Core Fixing and Handling Project Manger Brochure ...ppc-site.com/images/PPC_2010-011_Brochure-CORE_FX... · PPC staff participated in many core analysis projects for different
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
OILFIELD/PETROCHEMICAL EXPERIENCEPPC assists chemical, metallurgical and industrial plant owners in solving their operational and environmental problems and in planning and executing their capital projects.
PPC assists chemical, metallurgical and
industrial plant owners in solving their opera-
tional and environmental problems and in plan-
ning and executing their capital projects. We
have functional expertise in testing and problem
evaluation, process planning, preliminary engi-
neering and cost estimating, process licensing
and project management. Specific refining and
petrochemical process experience follows:
• Operating experience on a MEK/Toluene Lube Oil Solvent Dewaxing Unit for a major refiner.
• Process design studies to modify an existing MEK Dewaxing Unit to primarily deoiling ap-plications for a wax-processing refinery.
• Crude and Vacuum Unit Design.
• Detailed design of Filter House modifications for a wax processing refinery.
• Detailed design for tank farm and other off-sites, including new pipe rack and loading rack for a wax refinery.
• Process studies for naphtha splitting to achieve optimum balance between reforming and isomerization for octane, maximum ben-zene reduction, overall capacity, etc.
• Process design to revamp an existing re-former to operate at low pressure to improve gasoline and hydrogen yield and minimize C1-C4 yield.
PPC - Core Fixing and Handling Project Manger Brochure - Al Khafji Joint Operations
PROCESS PLANTS CORPORATION PO Box 1966 Cranberry Township PA 16066-0966
Adding or moving a processIf you are thinking about expanding or modernizing your existing facility, please consider Process Plants Corpo-ration for assisting you in this task.
CORE FXOILFIELD AND RESERVOIR SERVICE SPRING 2010 PPC
We provide single point re-sponsibility in performing engi-neering, procurement and con-struction (EPC) for projects. PPC has extensive experience in the petrochemical, organic and non-organic chemicals, powder metal, natural gas, syn-fuel, cement and co-generation fields.
PPC delivers engineering services and products to process industries including manufacturing, chemical, petrochemical, and
power generation industries. We work with our clients to deliver cost-effective and sustainable solutions through state-of-the-art tech-
of experience in propriety process development work with clients or inde-pendently with client ap-proval. PPC’S work has included highly explosive, flammable, highly toxic and high-pressure proc-ess.
We would enjoy meeting with you to present our capabilities in greater detail and assure you of our
Core Analysis - Conventional Layout and Orientation and Core Fixing.Opening Core from the tubes, cleaning the cores, marking top and bottom as per the stan-dard. Marking the depth and boxing the core. Worked on core fixing project of different Saudi Aramco wells.
LEAD CORECONSULTANT
S.M. Ismail Azam
Conventional core analysis FIXING ANALYSIS DEPTH
Core refixing, Lay out & Orientation, marking top bottom, slabbing, plug matching and re-packing. Supervisition & training of new em-ployees was part of project management responsibility.
Involved in all ma-jor analysis of the Conventional Core Analyses (CCA) Dept. Routine rock proper-ties analysis, Plugs and whole Core (Grain Density, Po-rosity, Permeabil-ity) analysis, Plug-ging (nitrogen, rou-tine), Core gamma, Core photography.
As Senior Core Technican & Consultant for Process Plants Corporation, Mr. Sadruddin handles our analysis and tech-nicians in the field. He is our Core analyst with 20 years of experience of routine and con-ventional core analysis. Well trained and experienced of op-erating all conventional core analysis instruments. Worked in different companies as core analyst, lab technician, and have participated in many core analysis projects for different cli-ents located in different coun-tries.
Work Experience
Before joining PPC’s in Techni-cal Operations, Mr. Sadruddin was a Team Leader Core Resto-ration, Gulf Wells Corporation Saudi for several years. Sad-ruddin has supervised core res-toration projects for Saudi Aramco. His responsibilities in-cluded Core refixing, Lay out & Orientation, marking top bottom,
slabbing, plug matching and re-packing. Supervisition & train-ing of new employees was part of project management respon-sibility. Prior seven years Mr. Sadruddin was Core Analyst Engineer for Conventional Core Analysis, Res Lab, Abu Dhabi:
Performs jobs related to Routine Rock Properties analysis includ-ing; core preparation, core gamma, core processing (satu-ration, plugging, cleaning & slabbing), core photography, core preservation (on-site and laboratory), assists with labora-tory analyses (porosity, perme-ability, grain density). Assists with laboratory gas analyses and on-site PVT sampling.
Involved in all major analysis of the Conventional Core Analyses (CCA) Dept. Routine rock prop-erties analysis, Plugs and whole Core (Grain Density, Porosity, Permeability) analysis, Plugging (nitrogen, routine), Core gamma, Core photography.
Sadruddin will be our interna-tional field tech living where the contracts located.
...we consider ourselves a cost-
effective alternative for many of the key ancillary sys-
tems required in such an instal-lation ...PPC is not too small to
do the large projects or the small projects either...be the
lead engineering com-pany for a
PPC - Core Fixing and Handling Project Manger Brochure - Al Khafji Joint Operations
PROCESS PLANTS CORPORATION PO Box 1966 Cranberry Township PA 16066-0966