PP-PS JOINT INVERSION FEASIBILITY STUDY - APPLICATION IN OKLAHOMA UNCONVENTIONAL RESOURCE PLAY Pete Christianson, Magdy Ghattas, Robert Hu and Matt McGuire* “"Marathon Oil", the blue wave and combinations thereof are registered trademarks of Marathon Oil Company.” “This document is protected by copyright and may not be reproduced, modified, distributed, displayed, or published without the prior written permission of Marathon Oil Company. Do not alter or remove any trademark, copyright or other notice.” * Former Marathon Oil Employee
20
Embed
PP-PS JOINT INVERSION FEASIBILITY STUDY - APPLICATION … Joint...Density of PP-PS joint inversion vs. well logs ~7% Uplift From PP-PS Joint Inversion. Density of PP simultaneous inversion
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PP-PS JOINT INVERSION FEASIBILITY STUDY- APPLICATION IN OKLAHOMA
UNCONVENTIONAL RESOURCE PLAY
Pete Christianson, Magdy Ghattas, Robert Hu and Matt McGuire*
“"Marathon Oil", the blue wave and combinations thereof are registered trademarks of Marathon Oil Company.”“This document is protected by copyright and may not be reproduced, modified, distributed, displayed, or published without the prior written permission of Marathon Oil Company. Do not alter or remove any trademark, copyright or other notice.”
* Former Marathon Oil Employee
Presenter
Presentation Notes
Slide layouts have been created for a number of different slide styles in the template. Choosing ‘New Slide’ from the ‘Home’ ribbon displays two full sets of these slide layouts. The first set includes a subtitle under the content slide titles, the second set has only the title on the content slides. Different slide layouts can be applied by ‘right-clicking’ a slide and choosing ‘Layout…’ – this will display the same palette of slide layouts for selection. For more detailed information on working with slide layouts, go to Microsoft PowerPoint Help and enter ‘slide layout’ in the search field. This slide uses slide layout: Title Slide Preset type sizes The presentation headline and presentation title type size and style has been preset in the template. The subtitle information needs to manually applied. Images Title images can be replaced but need to have sufficient contrast for the headline to be legible. When working with images, it may be necessary to arrange elements of the content differently (i.e., ‘Send to back’) in order to be able to select and edit them.
Project Objectives
Assess the efficacy of the PP-PS joint inversion compared to the PP simultaneous inversion
Interpretation of elastic properties and derivatives in a testing survey area
Estimation of reservoir properties for lithofacies distribution
Analyze the PP-PS joint inversion workflow to evaluate the applicability of the technology to unconventional resource plays
Converted waves (PS)
What are converted waves?When the down-going P-wave (aka primary or compressive waves) hits an interface, it can reflect upwards as an S-wave (aka secondary or shear waves).
What can PS waves be used for?• Structural image• Rock properties• Fracture detection
Robert R. Stewart “Application and Interpretation of Converted-waves” Class
Workflow Diagram of a PP-PS Joint Inversion
Inversion Processes
Major steps of the project included:
Evaluate the quality of PP and PS stack data including frequency contents and correlation of events between PP and PS data
Condition PP and PS azimuthal gathers to improve the data quality with reference to the synthetic PP and PS gather of well data
PP-PS joint inversion and PP-only simultaneous inversion
Data Preparation Steps
PP and PS data are high quality with comparable frequencies
The polarity convention for PS during this study is that an increase in PS impedance (at 25 degree) is represented by a peak (PS interpretation polarity)
Bandwidth matching filter was applied to match the frequency spectrum of PS and PP
Major horizons have been picked in both PP and PS data
Registration from PS to PP time
Trim statics was applied for all azimuths per single offset stack (6 for PP and 12 for PS)
Noise attenuation was applied to reduce linear noise, PP and PS multiples
P-Impedance vs. Well Logs
P-Impedance from PP-PS Joint Inversion
P-Impedance from PP-only Simultaneous Inversion
Good tie between well logs and shear impedance volumes
Similar results from the PP-PS joint inversion & PP volumes
P-Impedance vs. Well Logs
P-Impedance of PP-PS joint inversion vs. well logs
~2% Uplift From PP-PS Joint Inversion
P-Impedance of PP simultaneous inversion vs. well logs
*Data points are extracted from an interval between 300ms above target and 100ms below target
Acquiring multicomponent seismic data allows you to measure rather than estimate shear wave properties
PP-PS joint inversion shows higher lateral consistency compared to PP-only simultaneous inversion – Fits with geologic model
Rock mechanics estimates show higher correlation coefficients when utilizing PS data in the inversion
Summary
Business Drivers
Improved geomechanical properties utilized in completions program
Better distribution of rock properties away from well control to predict well performance and geologic models
Combining PP-PS joint inversion with shear wave splitting results can predict natural fracture orientations and densities along with rock matrix properties
Potential Future Work
Continue building processes to make multicomponent data more cost effective
Acknowledgements
TGSCGG
Marathon Oil
THANK YOU
Presenter
Presentation Notes
This slide uses slide layout: Section Divider (Image) Images End slide images can be replaced but need to have sufficient contrast for the type elements to be legible. When working with images, it may be necessary to arrange elements of the content differently (i.e., ‘Send to back’) in order to be able to select and edit them.
Q&A
Presenter
Presentation Notes
This slide uses slide layout: Section Divider (Color) Other background colors should not be used.