powRgrip System - Productivity Inc€™s powRgrip System is a unique collet-holding system ... TC Toolholders (DIN 69871) Type Standard Part No. Form B Part No. D [mm] L [mm] Balancing
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
More Technical Information available at WWW.REGO-FIX.COM
powRgrip® What is powRgrip?
Swiss QualityMade in Switzerland to ISO 9001/ISO 14001.
What is powRgrip REGO-FIX’s powRgrip System is a unique collet-holding system that utilizes a special shallow-tapered collet that is pressed into a holder with a matching taper. This state-of-the-art system uses either a hydraulic hand-pump or a table top hydraulic press specifically designed to quickly insert these collets with up to 9 tons of force.
T.I.R. of the Whole System < 0.0001" (3 μm)Highest clamping force and lowest runout.
Taper Accuracy AT3Better spindle-to-holder fit and accuracy.
Surface Finish max. Ra 0.25Higher clamping force and higher transferable torque.
Q+® Balancing 100% balanced to lowest possible residual imbalance.
Hi-Q® Balancing System Ready to accept Hi-Q® balancing rings which will allow for the offset of the imbalance introduced by the cutting tool up to 80,000 rpm.
Minimal Outside DimensionsSlim design provides more processing flexibility.
FastTool clamping with hydraulic press < 10 seconds.
Excellent at Small DiametersClamping of small diameter tools from Ø 0.2 mm.
More Technical Information available at WWW.REGO-FIX.COM
powRgrip® Features Benefits
T.I.R. of < 0.0001" (3 μm)
Clamping operation in less than 10 seconds when using the PGU automatic machine.
High vibration dampening due to the interupted surfaces between the toolholder to collet and the collet to tool shank.
Highest transferable torque and lowest T.I.R., even after 20,000 tool changes
For 5 years or 20,000 cycles, REGO-FIX® guarantees the T.I.R. of a properly maintained powRgrip® holder and collet will not exceed 0.0001” and that the impregnated surface treatment will not erode.
Clamps all types of toolshanks and materials in h6 tolerance from Ø 0.0079" – 1.0" (0.2 – 25.4 mm)
Developed for optimal productivity such as High Speed Cutting (HSC) and High Performance Cutting (HPC)
Transferable Torque of the powRgrip® System
PG
3COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
Information
PG ToolholdersApplicationsThese toolholders are designed for use on CNC machining centers with automatic tool changers. They are especially suited for High Speed Cutting (HSC) and High Performance Cutting (HPC) operations where processing reaches the machine limits. The vibration dampening of PG colletholders reduce spindle wear and extend tool life.
BalancingREGO-FIX® Q+® System PG toolholders are balanced by design to G 2.5 @ 22,000 rpm for steep taper holders and up to 90,000 rpm for HSK holders. Type H toolholders are ready to accept Hi-Q® balancing rings which allow precision balancing of the system up to 80,000 rpm depending on the balancing rings used.
Coolant ThroughFor use with coolant through tools.
Peripheral CoolingPG-CF collets for peripheral cooling with non-coolant through tools.
Matched Tooling System for Best FitFor highest precision and best results the whole system counts. For that reason REGO-FIX® components are carefully matched to fit together. This guarantees best run-out and balancing.
Tool Precise preset repeatability
for both HSS and carbide tools
ColletSlightly tapered shape
maximizes clamping force
HolderSuperior runout and
vibration dampening in a variety of taper styles
As a Licensed BIG Plus manufacturer, REGO-FIX® uses new state of the art measuring and grinding systems to create the most accurate dual contact holders that can be produced.
Taper Contact
Flange Contact
PG
4COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
Standard
CAT Toolholders
TypeStandardPart No.
Form BPart No.
D[mm]
L[inch]
Balancing Rings
CAT 40 / PG 6 x 3” H 4340.70631 – 10 3 FWR 285
CAT 40 / PG 10 x 3.5" H 4340.71001 4340.71004 16 3.5 FWR 285
CAT 40 / PG 10 x 6" H 4340.71071 4340.71074 16 6 FWR 285
CAT 40 / PG 15 x 3.15" H 4340.71541 4340.71544 24 3 FWR 285
CAT 40 / PG 15 x 4" H 4340.71551 4340.71554 24 4 FWR 285
CAT 40 / PG 15 x 6" H 4340.71571 4340.71574 24 6 FWR 325/285
CAT 40 / PG 25 x 3.15" H 4340.72541 4340.72544 40 3 FWR 405
CAT 40 / PG 25 x 4" H 4340.72551 4340.72554 40 4 FWR 405
CAT 40 / PG 25 x 6" H 4340.72571 4340.72574 40 6 FWR 405/405
CAT 40 / PG 32 x 3.5” H* 2340.73201 – 50 3.5 –
CAT 40 / PG 32 x 4.3" H 4340.73251 4340.73254 50 4.3 FWR 505
CAT 40 / PG 32 x 6" H 4340.73271 4340.73274 50 6 FWR 505/505
CAT 50 / PG 10 x 4” H 4350.71051 – 16 4 FWR 405
CAT 50 / PG 15 x 4” H 4350.71551 – 24 4 FWR 405
CAT 50 / PG 25 x 4" H 4350.72551 4350.72554 40 4.0 FWR 505
CAT 50 / PG 25 x 6" H 4350.72571 4350.72574 40 6.0 FWR 505/405
CAT 50 / PG 32 x 4.3" H 4350.73251 4350.73254 50 4.3 FWR 505
CAT 50 / PG 32 x 6" H 4350.73271 4350.73274 50 6 FWR 505/505
*Not for use with balancing rings.
CAT CAT+ PG
Form B
TypeStandardPart No.
D[mm]
L[inch]
Balancing Rings
CAT+ 40 / PG 10 x 3.5" H 4340.71006 16 3.5 FWR 285
CAT+ 40 / PG 10 x 6" H 4340.71076 16 6 FWR 285
CAT+ 40 / PG 15 x 3.15" H 4340.71546 24 3 FWR 285
CAT+ 40 / PG 15 x 6" H 4340.71576 24 6 FWR 325/285
CAT+ 40 / PG 25 x 3.15" H 4340.72546 40 3 FWR 405
CAT+ 40 / PG 25 x 6" H 4340.72576 40 6 FWR 405/405
CAT+ 40 / PG 32 x 3.5” 2340.73206 50 3.5 –
CAT+ 40 / PG 32 x 6” 4340.73276 50 6 FWR 505/405
CAT+ 50 / PG 10 x 4” H 4350.71056 16 4 FWR 405
CAT+ 50 / PG 15 x 4” H 4350.71556 24 4 FWR 405
CAT+ 50 / PG 25 x 4” H 4350.72556 40 4 FWR 505
CAT+ 50 / PG 25 x 6” H 4350.72576 40 6 FWR 505/405
CAT+ 50 / PG 32 x 4.3” H 4350.73256 50 4.3 FWR 505
CAT+ 50 / PG 32 x 6” H 4350.73276 50 6 FWR 505/505
“BIG-PLUS SYSTEM - Licensed by BIG Daishowa”
CAT+ 40 Toolholders
PG
5COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
Standard
TC Toolholders (DIN 69871)
TypeStandardPart No.
Form BPart No.
D[mm]
L[mm]
Balancing Rings
TC 30 / PG 10 x 060* 2230.71020 – 16 60 –
TC 30 / PG 10 x 073 H 4230.71030 – 16 73 FWR 285
TC 30 / PG 15 x 060* 2230.71520 – 24 60 –
TC 30 / PG 15 x 080 H 4230.71540 – 24 80 FWR 285
TC 30 / PG 15 x 120 H 4230.71560 – 24 120 FWR 285
TC 30 / PG 25 x 080* 2230.72540 – 40 80 –
TC 30 / PG 25 x 160 H 4230.72580 – 40 160 FWR 405
TC 40 / PG 10 x 080 H 4240.71040 4240.71043 16 80 FWR 285
TC 40 / PG 10 x 120 H 4240.71060 4240.71063 16 120 FWR 285
TC 40 / PG 10 x 160 H 4240.71080 4240.71083 16 160 FWR 325
HSK-E 40 / PG 15 x 120 H 4540.71564 24 120 FWR 285
HSK-E 40 / PG 25 x 090* 2540.72544 40 90 –
HSK-E 40 / PG 25 x 100 H 4540.72554 40 100 FWR 405
HSK-E 50 / PG 6 x 080 H 4550.70644 10 80 FWR 285
HSK-E 50 / PG 10 x 080 H 4550.71044 16 80 FWR 285
HSK-E 50 / PG 10 x 120 H 4550.71064 16 120 FWR 285
HSK - Form A & E Holders Continued
HSK PG
* Not for use with balancing rings. * Not for use with balancing rings. +Compatible with Willemin-Macodel Machines
PG
9COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
HSK PG
HSK - Form E Holders Continued
Type Part No.D
[mm]L
[mm]Balancing
Rings
HSK-E 50 / PG 10 x 160 H 4550.71084 16 160 FWR 285
HSK-E 50 / PG 15 x 080 H 4550.71544 24 80 FWR 285
HSK-E 50 / PG 15 x 120 H 4550.71564 24 120 FWR 285
HSK-E 50 / PG 25 x 100 H 4550.72554 40 100 FWR 405
HSK-F 63 / PG 10 x 080 H 4563.71045 16 80 FWR 325
HSK-F 63 / PG 10 x 120 4563.71065 16 120 FWR 285
HSK-F 63 / PG 10 x 160 4563.71085 16 160 FWR 285
HSK-F 63 / PG 15 x 080 H 4563.71545 24 80 FWR 325
HSK-F 63 / PG 15 x 120 H 4563.71565 24 120 FWR 325
HSK-F 63 / PG 15 x 160 H 4563.71585 24 160 FWR 325
HSK-F 63 / PG 25 x 100 H 4563.72555 40 100 FWR 405
HSK-F 63 / PG 25 x 160 H 4563.72585 40 160 FWR 405/405
HSK-F 63 / PG 32 x 100* 2563.73255 50 100 –
HSK-F 80 Call For Availability 800-999-7346
* Not for use with balancing rings.
PG
10COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
Type Part No.D
[mm]L
[mm]Balancing
Rings
C3 / PG 6 x 045* 2803.70610 10 45 –
C3 / PG 10 x 055* 2803.71010 16 55 –
C3 / PG 15 x 067* 2803.71520 24 67 –
C4 / PG 6 x 048* 2804.70610 10 48 –
C4 / PG 10 x 060* 2804.71020 16 60 –
C4 / PG 10 x 080 H 4804.71040 16 80 FWR 225
C4 / PG 15 x 062* 2804.71520 24 62 –
C4 / PG 15 x 080 H 4804.71540 24 80 FWR 285
C5 / PG 6 x 080 H 4805.40640 10 80 FWR 285
C5 / PG 10 x 060* 2805.71020 16 60 –
C5 / PG 10 x 080 H 4805.71040 16 80 FWR 285
C5 / PG 10 x 120 H 4805.71060 16 120 FWR 285
C5 / PG 15 x 065* 2805.71520 24 65 –
C5 / PG 15 x 080 H 4805.71540 24 80 FWR 285
C5 / PG 15 x 120 H 4805.71560 24 120 FWR 325
C5 / PG 25 x 080* 2805.72540 40 80 –
C5 / PG 25 x 100 H 4805.72550 40 100 FWR 405
REGO-FIX CAPTO Holders
REGO-FIX CAPTO PG
Type Part No.D
[mm]L
[mm]Balancing
Rings
C6 / PG 10 x 080 H 4806.71040 16 80 FWR 325
C6 / PG 10 x 120 H 4806.71060 16 120 FWR 325
C6 / PG 10 x 160 H 4806.71080 16 160 FWR 325
C6 / PG 15 x 080 H 4806.71540 24 80 FWR 325
C6 / PG 15 x 120 H 4806.71560 24 120 FWR 325
C6 / PG 15 x 160 H 4806.71580 24 160 FWR 325
C6 / PG 25 x 085* 2806.72540 40 85 –
C6 / PG 25 x 100 H 4806.72550 40 100 FWR 405
C6 / PG 25 x 120 H 4806.72560 40 120 FWR 405
C6 / PG 25 x 160 H 4806.72580 40 160 FWR 405
C6 / PG 32 x 090* 2806.73240 50 90 –
C8 / PG 25 x 092* 2808.72540 40 92 –
C8 / PG 32 x 090* 2808.73240 50 90 –
*Not for use with balancing rings.
PG
11COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
VDI PG
The PG VDI holder program brings the benefits to lathes that until now, only milling machines have taken advantage of for years. These include better TIR, improved tool dampening, easier presetting, longer tool life and unparalleled clamping forces.
Type Part No.D
[mm]D1
[mm]L
[mm]L1
[mm]
VDI 30 / PG 15 x 077 2930.71530 24 30 77 55
VDI 30 / PG 25 x 082 2930.72540 40 30 82 60
VDI 40 / PG 15 x 077 2940.71530 24 40 77 55
VDI 40 / PG 25 x 082 2940.72540 40 40 82 60
VDI 50 / PG 15 x 085 2950.71540 24 50 85 55
VDI 50 / PG 25 x 090 2950.72540 40 50 90 60
The PG Cylindrical Turning holders have all of the features that you expect from the PG system, now available for machines that require cylindrical holders. Available in the most common mounting block and turret diameters, these holders will bring new precision and repeatability to any machine application.
More Technical Information available at WWW.REGO-FIX.COM
Type Part No.L
[mm]D
[mm]Fine Thread Main Nut
ER 20 M / PG 10 7661.20100 35.5 16
ER 25 M / PG 15 7661.25150 36 24
Coarse Thread Main Nut
ER 20 / PG 10 7660.20100 35.5 16
ER 25 / PG 15 7660.25150 36 24PGU Automatic or PGC hand-pump is required
for use with the powRgrip System
What is Swiss Quick?
powRgrip / ER Reductions
Swiss Quick Tool Changing System
Swiss QualityMade in Switzerland to ISO 9001/ISO 14001.
What is Swiss Quick Tool Changing SystemOne of the latest REGO-FIX innovations is the SwissQuick ER to ER adapter. These are short “mini-holders” with a solid ER body profile on the back end, and a smaller ER series cavity on the front end. This unique design results in the shortest and most rigid ER to ER reduction available. Because of the solid body design, accuracy can be improved with a taper to collet cavity TIR of less than 0.0001” (3 um), and are repeatable within 0.0005” on tool length. Locking RingSpecial locking ring to insure that the collet body is removed with the nut.
Matched Tooling System for Best FitFor highest precision and best results the whole system counts. For that reason REGO-FIX® components are carefully matched for optimum fit and accuracy. This guarantees the best run-out and balance.
TIR of the SystemPG run-out of 0.0001” or better when using the REGO-FIX® powRgrip® System.
ER run-out of 0.0002” or better with a REGO-FIX® UP Collet
PG
13COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
CYL SSY PG DIN 1835 B+E
PG Softsynchro®
Tapping HolderApplicationsREGO-FIX® Softsynchro® tapping holders are used on machines that are designed for direct tapping. Many of the newer CNC machines feature synchronization between spindle feed and thread pitch. This allows to use rigid tapping holders. However due to the dynamics of spindle and linear motors synchronization errors occur. To compensate for these synchronization errors Softsynchro® tapping holders with minimal length adjustment are necessary. Depending on the application Softsynchro® tapping holders increase tool life up to 150%.
Comparison TestsThe two diagrams show the axial forces when cold-forming M10 threads in St37 steel.
Conclusion: Axial forces increase with increasing rpm. With REGO-FIX® Softsynchro® tapping holders the forces are considerably lower than when using rigid tapping toolholders. Therefore the surface quality and tool life is optimized when using Softsynchro® tapping holders on a synchronized machine spindle.
More Technical Information available at WWW.REGO-FIX.COM
Vibration Decay Chart
This New MICRO-FRICTION DAMPENING™ (MFD) technology (pat. pending) from REGO-FIX allows the holders to dissipate vibrations faster than standard long reach holders. Dampening the vibrations faster means that your cutting tool, part and spindle will see less vibrations resulting in better surface finishes, longer tool life and less spindle wear.
Machining parameters have to be adapted to the gauge length of the Xtended Length
Toolholders
0 100 200 300 400 500 600 700-1000
-500
0
500
1000
1500
Zeit in ms / Time in ms
Bes
chle
unig
ung
in m
/s2 /
Acc
eler
atio
n in
m/s
2
0 100 200 300 400 500 600 700-1000
-500
0
500
1000
1500
Zeit in ms / Time in ms
Bes
chle
unig
ung
in m
/s2 /
Acc
eler
atio
n in
m/s
2
0 100 200 300 400 500 600 700-1000
-500
0
500
1000
1500
Zeit in ms / Time in ms
Bes
chle
unig
ung
in m
/s2 /
Acc
eler
atio
n in
m/s
2
0 100 200 300 400 500 600 700-1000
-500
0
500
1000
1500
Zeit in ms / Time in ms
Bes
chle
unig
ung
in m
/s2 /
Acc
eler
atio
n in
m/s
2
Standard toolholder
REGO-FIX® Xtended Length Toolholder with MFD™ Technology.
Acce
lerati
on in
m/s
2
Time in ms
Acce
lerati
on in
m/s
2
Time in ms
REGO-FIX® XL Toolholder
PG
15COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
+Holder is mono-block design and does not feature vibration dampening technology. Note: Maximum 5,000 r.p.m.
C8 / PG25 x 330 XL 8888.76160 40 – 52 – – 240 330 Note: Maximum 5,000 r.p.m.
REGO-FIX CAPTO XL Toolholders
PG
20COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
powRgrip® Collets What are PG Collets?
Swiss QualityMade in Switzerland to ISO9001/ISO14001.
What are PG ColletspowRgrip (PG) Collets are precisely engineered to exacting tolerances. This assures that once the collets are pressed into the matching powRgrip holder, the result will be an accurately assembled system of less than 0.0001” TIR. Special metal processing provides the collets unique black appearance and results in an extremely hard surface finish that allows users to experience unmatched longevity and repeatability.
Precision Highest T.I.R. <0.0001” .
Accurate Length Adjustment <10 μmWith integrated adjustment screw.
Clamping of all h6 Tool ShanksCylindrical, WELDON, Whistle-Notch
Clamping of all Shank MaterialsSolid carbide and HSS tool shanks.
Clamping Diameters 0.2 to 25.4 mm
FastClamping in less than 10 seconds.
Simple HandlingParameters are automatically set.
High Vibration Dampening High vibration dampening due to the interface surfaces between the toolholder to collet and the collet to tool shank.
Highest Transferable TorqueThe powRgrip® system yields the highest transferable torque of all comparable systems.
Productivity and Tool LifeSpecially designed to allow for maximum machining capability.
PG
21COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
PG Collets do not have a clamping range. Nominal diameter only. Requires h6 tolerance shanks which are listed on page 31.
powRgrip® Collets
Dia.(mm)
Dia.(inch)
PG 10Part No.
PG 10CFPart No.
0.200 1710.00209 –
0.300 1710.00309 –
0.400 1710.00409 –
0.500 1710.00509 –
0.600 1710.00609 –
0.700 1710.00709 –
0.800 1710.00809 –
0.900 1710.00909 –
1.000 1710.01009 –
1.500 1710.01509 –
1.588 1/16 1710.01589 –
2.000 1710.02000 –
2.500 1710.02500 –
3.000 1710.03000 1710.03002
3.500 1710.03500 –
3.175 1/8 1710.03181 1710.03183
4.000 1710.04000 1710.04002
4.500 1710.04500 –
4.763 3/16 1710.04761 1710.04763
5.000 1710.05000 1710.05002
5.500 1710.05500 –
6.000 1710.06000 1710.06002
6.350 1/4 1710.06351 1710.06353
Dia.(mm)
Dia.(inch)
PG 6Part No.
PG 6CFPart No.
0.200 1706.00209 –
0.300 1706.00309 –
0.400 1706.00409 –
0.500 1706.00509 –
0.600 1706.00609 –
0.700 1706.00709 –
0.800 1706.00809 –
0.900 1706.00909 –
1.000 1706.01009 –
1.500 1706.01509 –
2.000 1706.02000 –
2.500 1706.02500 –
3.000 1706.03000 –
3.175 1/8” 1706.03181 –
PG 10 ColletsPG 6 Collets
PG REGO-FIX®
Standard ColletMetallic Sealed
PG REGO-FIX®
Coolant Flush
PG Collet Options
PG
22COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
More Technical Information available at WWW.REGO-FIX.COM
Ø[mm]
Ø[inch]
PG 15-TPart No.
PG 25-TPart No.
5.000 – 1715.05007 1725.05007
6.000 – 1715.06007 1725.06007
6.350 1/4" 1715.06357 1725.06357
8.000 – 1715.08007 1725.08007
9.525 3/8" 1715.09537 1725.09537
10.000 – 1715.10007 1725.10007
12.000 – – 1725.12007
12.700 1/2” – 1725.12707
16.000 – – 1725.16007
19.050 3/4” – 1725.19057
20.000 – – 1725.20007
The PG boring bar collets bring the ability to transform your normal PG holder into a boring bar holder without losing accuracy or repeatability. The collets are designed to hold the cylindrical boring bar and position it correctly in the PG holder.
Boring Bar Collets PG-T
Boring Bar Collets
PG
24COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
secuRgrip PG
secuRgripApplicationspowRgrip now offers an option for those most difficult machinging applications that require the ultimate in cutting tool security. secuRgrip utilizes powRgrips’ tremendous gripping strength in combination with a patented locking key system and threaded cap. These two additional levels of cutting tool security provide an added degree of confidence for those special applications such as expensive castings or complex parts.
Ease of UseUnlike other systems, secuRgrip does not require the purchase of any expensive special modified endmills from limited manufacturers. Instead, it allows for the use of standard Weldon flat tools on any standard carbide or HSS endmill.
LockingThe locking key fits into the Weldon flat prior to assembly and secures the endmill to the collet in this easy to assemble system. A special locking cap then locks the collet and cutter assembly to the holder once pressed in.
PresettingAll secuRgrip collets are designed to provide “z” height adjustment when required. secuRgrip is currently available in both the PG 25 and PG 32 holder series.
Level 1 SecurityLocking Key on
Cutting Tool
Level 2 SecurityLocking Cap for
PG Collet
PG
25COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
CAT+ PG-SG HoldersCAT PG-SG Holders
BT+ PG-SG HoldersBT PG-SG Holders
CAT secuRgrip PG
BT secuRgrip PG
TypeREGO-PLUS
D[mm]
L [mm]
Balancing Rings
CAT+ 40 / PG-SG 25 x 3.15” H 5340.72546 46 3.15 FWR 405
CAT+ 40 / PG-SG 25 x 4” H – 46 4 FWR 405
CAT+ 40 / PG-SG 25 x 6” H 5340.72576 46 6 FWR 405/405
CAT+ 40 / PG-SG 32 x 3.5”* 5340.73206 55 3.5 –
CAT+ 40 / PG-SG 32 x 4.3” H – 55 4.3 FWR 505
CAT+ 40 / PG-SG 32 x 6” H 5340.73276 55 6 FWR 505/505
CAT+ 50 / PG-SG 25 x 4” H 5350.72556 46 4 FWR 405
CAT+ 50 / PG-SG 25 x 6” H 5350.72576 46 6 FWR 405/405
CAT+ 50 / PG-SG 32 x 4.3” H 5350.73256 55 4.3 FWR 505
CAT+ 50 / PG-SG 32 x 6” H 5350.73276 55 6 FWR 505/505
* Not for use with balancing rings
TypeStandardPart No.
Form BPart No.
D[mm]
L [mm]
Balancing Rings
CAT 40 / PG-SG 25 x 3.15” H 5340.72541 5340.72544 46 3.15 FWR 405
CAT 40 / PG-SG 25 x 4” H 5340.72551 5340.72554 46 4 FWR 405
CAT 40 / PG-SG 25 x 6” H 5340.72571 5340.72574 46 6 FWR 405/405
CAT 40 / PG-SG 32 x 3.5”* 5340.73201 – 55 3.5 –
CAT 40 / PG-SG 32 x 4.3” H 5340.73251 5340.73254 55 4.3 FWR 505
CAT 40 / PG-SG 32 x 6” H 5340.73271 5340.73274 55 6 FWR 505/505
CAT 50 / PG-SG 25 x 4” H 5350.72551 5350.72554 46 4 FWR 405
CAT 50 / PG-SG 25 x 6” H 5350.72571 5350.72574 46 6 FWR 405/405
CAT 50 / PG-SG 32 x 4.3” H 5350.73251 5350.73254 55 4.3 FWR 505
CAT 50 / PG-SG 32 x 6” H 5350.73271 5350.73274 55 6 FWR 505/505
* Not for use with balancing rings
TypeREGO-PLUS
D[mm]
L [mm]
Balancing Rings
BT+ 40 / PG-SG 25 x 80 H 5140.72546 46 80 FWR 405
BT+ 40 / PG-SG 25 x 120 H 5140.72566 46 120 FWR 405
BT+ 40 / PG-SG 25 x 160 H 5140.72586 46 160 FWR 405/405
BT+ 50 / PG-SG 25 x 120mm H 5150.72566 46 120 FWR 405
BT+ 50 / PG-SG 25 x 160mm H 5150.72586 46 160 FWR 405/405
BT+ 50 / PG-SG 25 x 200 H – 46 200 FWR 405/405
TypeStandardPart No.
Form BPart No.
D[mm]
L [mm]
Balancing Rings
BT 40 / PG-SG 25 x 80 H 5140.72540 5140.72543 46 80 FWR 405
BT 40 / PG-SG 25 x 120 H 5140.72560 5140.72563 46 120 FWR 405
BT 40 / PG-SG 25 x 160 H 5140.72580 5140.72583 46 160 FWR 405/405
BT 50 / PG-SG 25 x 120mm H 5150.72560 – 46 120 FWR 405
BT 50 / PG-SG 25 x 160mm H 5150.72580 – 46 160 FWR 405/405
BT 50 / PG-SG 25 x 200 H 5150.72590 – 46 200 FWR 405/405
“BIG-PLUS SYSTEM - Licensed by BIG Daishowa”
“BIG-PLUS SYSTEM - Licensed by BIG Daishowa”
Standard Form B
PG
26COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
HSK A PG-SG Holders
HSK E & F PG-SG Holders
HSK A secuRgrip PG
HSK E & F secuRgrip PG
Type Part No.D
[mm]L
[mm]Balancing
Rings
HSK-A 63 / PG-SG 25 x 100 H 5563.72550 46 100 FWR 405
HSK-A 63 / PG-SG 25 x 120 H 5563.72560 46 120 FWR 405
HSK-A 63 / PG-SG 25 x 160 H 5563.72580 46 160 FWR 405/405
HSK-A 63 / PG-SG 25 x 200 H 5563.72590 46 200 FWR 405/40
HSK-A 63 / PG-SG 32 x 100* 5563.73250 55 100 –
HSK-A 63 / PG-SG 32 x 120 H 5563.73260 55 120 FWR 505
HSK-A 80 / PG-SG 25 x 100 H 5580.72550 46 100 FWR 405
HSK-A 80 / PG-SG 32 x 105 H 5580.73250 55 105 FWR 505
HSK-A 100 / PG-SG 25 x 100 H 5500.72550 46 100 FWR 405
HSK-A 100 / PG-SG 25 x 160 H 5500.72580 46 160 FWR 405/405
HSK-A 100 / PG-SG 25 x 200 H 5500.72590 46 200 FWR 405/405
HSK-A 100 / PG-SG 32 x 100* 5500.73250 55 100 –
HSK-A 100 / PG-SG 32 x 160* 5500.73280 55 160 –
HSK-A 100 / PG-SG 32 x 200* 5500.73290 55 200 –
HSK-A 125 / PG-SG 32 x 110* 5502.73250 55 110 –
* Not for use with balancing rings
Type Part No.D
[mm]L
[mm]Balancing
Rings
HSK-E 63 / PG-SG 25 x 100 H 5563.72554 46 100 FWR 405
HSK-F 63 / PG-SG 25 x 100 H 5563.72555 46 100 FWR 405
HSK-F 63 / PG-SG 25 x 160 H 5563.72585 46 160 FWR 405/405
HSK-F 63 / PG-SG 32 x 100mm 5563.73255 55 100 –
* Not for use with balancing rings
PG
27COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
REGO-FIX CAPTO PG-SG Holders
REGO-FIX CAPTO secuRgrip PG
Type Part No.D
[mm]L
[mm]Balancing
Rings
C5 / PG-SG 25 x 80* 5805.72540 46 80 –
C5 / PG-SG 25 x 100 H 5805.72550 46 100 FWR 405
C6 / PG-SG 25 x 085* 5806.72540 46 85 –
C6 / PG-SG 25 x 100 H 5806.72550 46 100 FWR 405
C6 / PG-SG 25 x 120 H 5806.72560 46 120 FWR 405
C6 / PG-SG 25 x 160 H 5806.72580 46 160 FWR 405/405
C6 / PG-SG 32 x 090* 5806.73240 55 90 –
C8 / PG-SG 25 x 092* 5808.72540 46 92 –
C8 / PG-SG 32 x 090* 5808.73240 55 90 –
* Not for use with balancing rings
PG
28COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
secuRgrip Replacement Inserts
secuRgrip Wrench Heads & Handles
secuRgrip PG
Type Part No.
PG 25-SG / Ø 12.0 mm 1725.12004S
PG 25-SG / Ø 1/2” 1725.12704S
PG 25-SG / Ø 14.0 mm 1725.14004S
PG 25-SG / Ø 5/8” 1725.15884S
PG 25-SG / Ø 16.0 mm 1725.16004S
PG 25-SG / Ø 18.0 mm 1725.18004S
PG 25-SG / Ø 3/4” 1725.19054S
PG 25-SG / Ø 20.0 mm 1725.20004S
PG 32-SG / Ø 12.0 mm 1732.12004S
PG 32-SG / Ø 1/2” 1732.12704S
PG 32-SG / Ø 14.0 mm 1732.14004S
PG 32-SG / Ø 5/8” 1732.15884S
PG 32-SG / Ø 16.0 mm 1732.16004S
PG 32-SG / Ø 18.0 mm 1732.18004S
PG 32-SG / Ø 3/4” 1732.19054S
PG 32-SG / Ø 20.0 mm 1732.20004S
PG 32-SG / Ø 25.0 mm 1732.25004S
PG 32-SG / Ø 1” 1732.25404SNote: Part Number Includes Insert
Type Part No.
SGI Ø 12.0 mm 7694.12000
SGI Ø 1/2” 7694.12700
SGI Ø 14.0 mm 7694.14000
SGI Ø 5/8” 7694.15880
SGI Ø 16.0 mm 7694.16000
SGI Ø 18.0 mm 7694.18000
SGI Ø 3/4” 7694.19050
SGI Ø 20.0 mm 7694.20000
SGI Ø 25.0 mm 7694.25000
SGI Ø 1” 7694.25400Note: Part Number for Insert Only
Type Part No.
SGN-PG 25 Wrench Head 7654.25000
SGN-PG 32 Wrench Head 7654.32000
SGHM Wrench Handle 8777.77777
secuRgrip Collets with Insert
PG
29COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
Type Part No. Description
PGU 9006 A (PG6-PG32) 7610.90160 110 V Machine USA/Canada
APG 906 7611.06900 PG 6 clamping insert
APG 910 7611.10900 PG 10 clamping insert
APG 915 7611.15900 PG 15 clamping insert
APG 925 7611.25900 PG 25 clamping insert
APG 932 7611.32900 PG 32 clamping insert
PGU 9006 automatic clamping unit with push-button operation and auto clamping insert recognition. Designed to make operation easy, fast and reliable. Easy interchangeable inserts and safety interlocks make the machine safe for all operators.
Type Part No. DescriptionMeasurement
W x D x HIncl.
Taper Cleaner
PGC 2506 7621.25069 powRgrip® Compact hydraulic clamping unit 450 x 492 x 280
APC 25 7622.25000 Insert for PGC 2506 for PG 25 toolholders ■APC 15 7622.15000 Insert for PGC 2506 for PG 15 toolholders ■APC 10 7622.10000 Insert for PGC 2506 for PG 10 toolholders ■APC 6 7622.06000 Insert for PGC 2506 for PG 6 toolholders ■
PGC hand pumps offer a price advantage over the PGU units while still performing the task of pressing in tools. The operator actuates the pressure by use of the lever arm until the desired pressure is achieved.
Automatic Machine & Inserts
Handpump & Inserts
PGU 9006 PGC 2506
PG
30COL1116.1 09/2013
Home
More Technical Information available at WWW.REGO-FIX.COM
Taper Cleaner
Cleaning Paper Set
Provides a quick and easy method of cleaning the powRgrip® holder bore of oil and debris before insertion of the tool.
A soft, absorbant paper specially prepared for cleaning the powRgrip® holder bore. The paper is lint-free and chemically neutral. For one time use only! Each pack contains 250 papers.
Type Part No. Description
TKCP 6 7657.06000 Taper cleaner for PG 6 colletholder
TKCP 10 7657.10000 Taper cleaner for PG 10 colletholder
TKCP 15 7657.15000 Taper cleaner for PG 15 colletholder
TKCP 25 7657.25000 Taper cleaner for PG 25 colletholder
TKCP 32 7657.32000 Taper cleaner for PG 32 colletholder
Type Part No. Description
CPS 6 7658.06000 Cleaning paper set for TKCP 6 / 250 papers
CPS 10 7658.10000 Cleaning paper set for TKCP 10 / 250 papers
CPS 15 7658.15000 Cleaning paper set for TKCP 15 / 250 papers
CPS 25 7658.25000 Cleaning paper set for TKCP 25 / 250 papers
CPS 32 7658.32000 Cleaning paper set for TKCP 32 / 250 papers
Matching Products
Presetting Tool
The powRgrip® presetting tool accepts the powRgrip® collets, and is inserted into the toolholder. The tool has a small thumb wheel for precise tool length adjustments, and allows maximum repeatability in the toolholder assembly.