Powerful administrative functions. • Real time alert systems (option): • Statistical sys tems: • ICT console (option): • Remote access test results data and their statistic charts to support manager analyze production problems, adjust the engineering process or trace back fail components to meet the key issue, original problem solving Automatic generate useful production administrative charts, such as components test value distribution charts, daily charts, period charts, test pins fails ranking, failure component ranking and test coverage rate analysis…etc. PRG. DEMO Alert when meets criterion of test fails.
37
Embed
Powerful administrative functions. Real time alert systems (option): Statistical systems: ICT console (option): Remote access test results data and their.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Powerful administrative functions.
• Real time alert systems (option):
• Statistical systems:
• ICT console (option): • Remote access test results data and their statistic charts to support manager analyze production problems, adjust the engineering process or trace back fail components to meet the key issue, original problem solving strategy.• Edit and debug test program at remote side.
Automatic generate useful production administrative charts, such as components test value distribution charts, daily charts, period charts, test pins fails ranking, failure component ranking and test coverage rate analysis…etc.
PRG. DEMOPRG.
DEMO
Alert when meets criterion of test fails.
Board View functions.
• Physical tested board display on screen monitor.
• Board view functions:
• Pin edit function:Show the physical outline of fail pins and their relative circuit and components to find the failure points or components easily.
Support smart board view function for trouble shooting station needs. See demo program for details.
Support fail components physical outline on screen to make the trouble shooting work more easier.
PRG. DEMOPRG.
DEMO
Test program generator.
• Test Program Conversion:
• Auto learning functions:
Auto learning for items of Open/Short, Component, IC, TAJ, ECJ respectively, then generate test program and their guarding points up to 95% automatically. It can save huge test program debugging and tuning time.
ATPD: Automatic Test program Debug.
PRG. DEMOPRG.
DEMO
Direct import CAD data from FABMASTER or other ICT test program from TRI、 JET、 OKANO、 TESCON、 TCO-5….etc, and convert them to ICT360AT test program directly.
Unique test functions.
• TA Jet :
• EC Jet :
• 4 wires mini ohm measurement:
• Up to 0.05Ω,mini ohm grade measurement.
• Explosion free capacitor: 100% missing part and polarity reverse detect rate.
• Parallel capacitors: 100% missing part and polarity reverse detect rate.
• BGA IC test approach to 100% coverage rate.
• SMD Connector test approach to 100% coverage rate.
• Intel 845 north bridge approach to 100% coverage rate.
PRG. DEMOPRG.
DEMO
Compatibility
• TAJ / HPJ compatibility.
• ECJ Fixture :
• Test program conversion :
Import from TRI / JET / OKANO / TESTCON / TCO-5 test program or Fabmaster CAD data to generate ICT360AT test program directly.
Just remove the ribbon connector cable from MUX card of HPJ system and plug it into Switch Card connector of TAJ system.
Add 3rd pin on upper side of the fixture for contacted the surface of each electrolytic capacitors.
PRG. DEMOPRG.
DEMO
PRG DEMOPRG DEMOReview
• ICT360AT evaluations(Excel) EXITEXIT
Powerful administrative functions.
Trouble shooting auxiliary.
Excellent Compatibility.
Return from investment.
CompareCompare
Automatic test program debug.
Unique test function.P4 EVAL.P4 EVAL.
EC JetEC Jet
TA JetTA Jet
Evaluations
Evaluations
• Quality Alert system / Statistic system / Remote console.
• Board View function / Show No-Go parts on screen monitor. • Test Pin edit function.
• Import from other Test Program or CAD data from fabmaster.• Automatic test program learning.
• TA Jet / EC Jet / Mini ohm measurement.
• TAJ / HPJ compatibility / ECJ fixture / Test program conversion.
ICT360AT supports 7 kinds of charts:
Statistical charts.
Daily chart.
Period chart.
Distribution chart.
IC measure value distribution chart.
Rank for bad pins of the bed of nails.
Rank for fail components.
Coverage rate analysis chart.
Statistical charts Performance.
Test program tuning as well as upper/lower limits setting for each test step.
Tested board quality monitoring and production problems real time tracking.
Components quality monitoring and problems trace back (ISO9001).
Test pins quality monitoring and probe replace indication of the Bed of Nails.
Fixture convert for TAJ and HPJ .
HPJ wiring. TAJ wiring
MUX CardMUX Card SWCSWC
Decoder Card
Decoder Card
Convert TAJ to HPJ: CASE 1
HPJ TAJ (HPJ fixture wiring application on ICT360AT.)
No such as Intel north bridge package IC, connector plug to SWCof ICT360AT directly. I.e. 100% HP pad compatible.
Convert TAJ to HPJ: CASE 2
HPJ TAJ (HPJ fixture wiring application on ICT360AT.
Board pasted with IC package such as Intel North bridge.
Drilling 3rd hole for TA pad application and pull HP pad downthen replace TAJ pad up. Then
i. Pin+ / Pin- connect to Decoder Card of ICT360AT.ii. Connect 3rd pin(Sync pin) connector to Switch Card of
360AT.
Convert HPJ to TAJ: CASE3
TAJ HPJ (TAJ fixture wiring application on HPJ fixture.
• Replace TAJ pad to HPJ pad.
• Connect TAJ pad Pin+ / Pin- fixture connector of ribbon cable to MUX Card connector.
• Leave 3rd Pin connector open circuit.
Test Programming PreparationThe preparation for fixture making
1. CAD file or Gerber file of DUT2. BOM of DUT3. Bare board and assembled board
(For high precision or multi-layer board, CAD file is recommend)
Check list for fixture making 1. The probe for ECJ test should be Spherical type with long stroke and low
spring force, the location of the probe should be precise.2. The pitch of probe tube and the connection of the array-pin for TAJ test
should be correct and can easily convert to HPJ test.
Test programming preparation
1. DUT: 1 bare board, 20 assembled boards. 2. Pins diagram of fixture3. BOM of DUT 4. DUT circuit diagram(Option) 5. The files at right should be provided by fixture maker.
*. DAT *.ICN *.ICP FORMAT.ASC NAILS.ASC NETS.ASC PARTS.ASC PINS.ASC