8/10/2019 Power Supplies Medbrochure
1/20
Medical Power Selection Guide 2011/12
8/10/2019 Power Supplies Medbrochure
2/20
XP Power is a leading international provider of power
solutions to the healthcare equipment market. With over 25%
of revenue coming from healthcare customers, XP has beenproviding solutions for well over a decade.
Our global headquarters are in Singapore and we have been
publically trading on the London Stock Exchange since 2000.
Serving 94% of the S&P500 healthcare equipment
manufacturers, we operate from 27 locations in Europe,
North America and Asia. We have the broadest portfolio of
standard power supplies that are designed for both patient
vicinity or laboratory applications. Our engineering teams are
located in North America, Europe and Asia and employ some
of the best power supply design talent in the industry.
XP Power reduces the production andrunning costs of your equipment enabling
you to gain a competitive advantage
QualityMedical devices that are used to treat and diagnose
conditions also pose a risk to the patient especially when they
are powered from mains electricity. Such devices have very
stringent safety regulations and they are designed in such a
way so as to mitigate the risk. Medical device manufacturers
are required to abide by strict quality standards to ensure that
each product is manufactured as it was intended to be. As the
power supply typically provides the main safety isolation
barrier between hazardous mains voltages and low voltage
DC, it is essential that steps are taken to ensure any risk is as
low as reasonably practical (ALARP).
In order to mitigate the risk associated with selecting acomponent such as a power supply, medical device
manufacturers should ensure their supplier has a quality
system that as a minimum meets the requirements of
ISO9001. XP has gone a step further and has gained
certification to ISO13485, which is a quality management
system for medical devices. By taking this extra step, XP are
ensuring that every power supply produced is as safe and fit
for purpose as can be. During the design stage all of our
products are developed under strict design controls. Below is
a list of some of the design controls that we employ:
Component derating design rules
Design verification testing
Component qualification
Supplier audit checklist DFMEA
Medical Power- Engineered by XP Power
8/10/2019 Power Supplies Medbrochure
3/20
ManufacturingOur main manufacturing location is at a facility located in
Kunshan, close to Shanghai, China. The factory provides
around 70,000 sq feet of manufacturing space and is a key
reason why XP can provide low risk power solutions to the
healthcare equipment industry. The facility which is certified to
ISO9001, ISO14001 and ISO13485 delivers manufacturing
capabilities that are truly class leading.
ProductsOur customers are constantly trying to differentiate their
products from those of their competitors through enhanced
performance and functionality. In turn, this dynamic createsdemand for power
converters that can satisfy a
very wide range of technical
requirements. Consequently,
the XP Power research and
development function has
developed, and continues to
improve, the broadest
product portfolio of medically
approved power supplies in
the industry. In addition to
this, the majority of XP
Power products are capable
of being modified specifically
to the customers exactrequirements. 02
Above:The recently expanded Kunshan
manufacturing facility.
Left:High standards and controls
maintained throughout the production
process.
ContentsNon-standard Solutions..................................................................03
Green Power ....................................................................................03
Protecting the Environment
Product Overview ............................................................................04
25 to 150 Watts Open-frame...........................................................05
ECS & ECP Series
140 to 350 Watts Open-frame.........................................................07
ECM/CLC & EMH Series
250 Watts Convection-cooled ........................................................09
CCB & CCM Series
40 to 175 Watts Multi-output ..........................................................11
ECM & RCL Series
400 to 1500 Watts Enclosed ...........................................................13
FCM, MHP & HPU Series
400 to 2500 Watts Configurable .....................................................15fleXPower Series
External Power ................................................................................16
AHM Series
High Isolation DC-DC Converters..................................................17
JHM Series
Quick Reference ..............................................................................18
8/10/2019 Power Supplies Medbrochure
4/20
Custom
Mecha
Optional Connectivity
Standard PSU
Thermal
Management
ORing Set &
Digital Control
03
Standard power supplies do not always meet the specific requirements
of the target application. Many power systems require custom output
voltage combinations, unique control / status signals and specific
mechanical packaging for optimal performance and integration. XP
Engineering Services provides solutions where applications cannot be
fulfilled from our standard product range or where integrated products
are required. We offer the worlds strongest standard product range,which provides us with a vast selection of power platforms from which to
deliver complex modified standards.
With local engineering design teams in key regions throughout North
America, Europe and Asia, XP is the ideal source to develop your
modified standard solution. Whatever the system power requirements,
we design and manufacture cost effective application specific solutions
that meet your electrical, mechanical, safety, EMC and thermal
management requirements, while ensuring a fast time to market.
Our power supplies and modules are manufactured in volume for many
customers providing cost effective and proven building blocks for
modified designs.
Non-standard Solutions
Low development cost
Low risk, proven technology
World class design
Short development times
Worldwide local engineering support
Low cost manufacturing in Asia
ISO 9001 quality management system
With the recent withdrawal of the external power supplies category by
Energy Star, we are no longer permitted to use the Energy Star logo. We
have accelerated the rate of green product introductions in the last two
years and have created our own 'green power' logo to highlight these
particular products to our customers. This logo will be used for the
appropriate products on datasheets and other marketing material.
Here we highlight what we mean by green power. This definition includes
the no load power limits and average efficiency limits of our 'green power'
products for both our external power supply range and component power
supplies.
More and more customers are asking us about efficiency and energy
consumption. In summary we are focused on developing products that
are smaller, produce less waste, consume less physical material and avoid
hazardous substances.
Our goal is to become the leader in our industry on environmental and
sustainability issues.
Board level Environmental Committee focused on minimizing our
environmental impact
A network of environmental representatives drive local i nitiative
and awareness
Environmental concerns and legislation drive demand for energy
efficient products
Applicant member of the Electronic Industry Citizenship Coalition
(EICC), full membership expected by April 2011
ISO14001 certified environmental management system
Protecting the Environment
No load power limits
Rated power No load consumption
0 W to 51 W) 0.5 W
Active mode power limits, O/P < 6 V
Rated power *Average efficiency
0 W to 1 W 0.497 x rated power+0.067
>1 W to 49 W ( 51 W) [0.0750 x Ln(Rated power)]+0.561
>49 W (>51 W) 0.86
No load power limits
Rated power No load consumption
0 W to 49 W (>51 W) 0.85
Active mode power limits, O/P 6 V
Rated power *Average efficiency
0 W to 1 W 0.48 x rated power+0.14
>1 W to 49 W ( 51 W) [0.0626 x Ln(Rated power)]+0.622
>49 W (>51 W) 0.87
Component power supplies meet the following criteria:
Green Power: A definitionExternal power supplies meet Energy Efficiency Level V
requirements as defined below:
Figures in ( ) are ErP limits. In addition, power supplies with an input power of 100 Wand above must have minimum power factor of 0.9 at 115 VAC 60 Hz.
*Average efficiency is measured at 25, 50, 75 & 100% load.
GREENPOWER
Our printers of this guide are certified by the Forest
Stewardship Council , meaning they are ethically
minded and the paper is from responsible sources.
8/10/2019 Power Supplies Medbrochure
5/20
Product Overview
04
Model Name Description No. of Outputs Available Output Voltages (VDC) Output Power (W) Page
AFM45 External / Desktop 1 12, 15, 18 & 24 45 16
AFM65 External / Desktop 1 12, 15, 18 & 24 65 16
AHM85 External / Desktop 1 12, 15, 19 & 24 85 16
AHM100 External / Desktop 1 12, 15, 19, 24 & 48 100 16
AHM150 External / Desktop 1 12, 15, 19, 24 & 48 150 16
AHM180 External / Desktop 1 12, 15, 19, 24 & 48 180 16
AHM250 External / Desktop 1 12, 15, 19, 24 & 48 250 16
ECS25 Open-frame 1 12, 15, 24 & 48 25 5
ECM40 Open-frame 1 - 3 5, 7, 9, 12, 15, 18, 24, 33 & 48 40 11
ECP40 Open-frame 1 - 3 5, 12, 15, 18, 24, 30 & 48 40 12
ECS45 Open-frame 1 5, 12, 15, 24 & 48 45 5
ECM60 Open-frame 1 - 3 3.3, 5, 7, 9, 12, 15, 18, 20, 24, 28, 33 & 48 60 11
ECS60 Open-frame 1 5, 12, 15, 24 & 48 60 5
ECS65 Open-frame 1 12, 15, 18.5, 24, 28 & 48 65 5
ECM100 Open-frame 1 - 4 3.3, 5, 7, 9, 12, 15, 18, 24, 28, 33 & 48 100 11
ECS100 Open-frame 1 12, 15, 24, 28 & 48 100 5
ECM140 Open-frame 1 12, 15, 18, 24, 28 & 48 140 7
ECP150 Open-frame 1 12, 15, 24, 28 & 48 150 5
CLC175 Open-frame 1 12, 24 & 48 175 7
RCL175 Open-frame 1 - 4 12, 15, 24, 28 & 48 175 11
CCB250 Open-frame 1 12, 15, 24, 28, 36 & 48 250 9
EMH250 Open-frame 1 12, 18, 24 & 48 250 7
EMH350 Open-frame 1 12, 18, 24 & 48 350 7
CCM250 U-Channel 1 12, 15, 24, 28, 36 & 48 250 9
FCM400 Enclosed 1 12, 15, 24, 28, 36 & 48 400 13
MHP650 Enclosed 1 12, 15, 24, 28, 36 & 48 650 13
MHP1000 Enclosed 1 12, 15, 24, 28, 36 & 48 1200 13
HPU1K5 Enclosed 1 12, 24 & 48 1500 13
fleXPower XM4 Configurable 1 - 10 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 600 15
fleXPower XM5 Configurable 1 - 10 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 700 15
fleXPower XM7 Configurable 1 - 10 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 900 15
fleXPower XM4DD Configurable 1 - 20 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 1200 15
fleXPower XM9 Configurable 1 - 12 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 1100 15
fleXPower XM10 Configurable 1 - 12 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 1200 15
fleXPower XM5DD Configurable 1 - 20 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 1400 15
fleXPower XM7DD Configurable 1 - 20 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 1800 15
fleXPower XM9DD Configurable 1 - 24 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 2200 15
fleXPower XM10DD Configurable 1 - 24 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 2400 15
fleXPower XM15 Configurable 1 - 24 3.3, 5, 12, 15, 24, 28, 36, 48 & 60 2500 15
JHM03 DC-DC Converter 1 - 2 5, 12 & 15 3 17
JHM06 DC-DC Converter 1 - 2 5, 12 & 15 6 17
JHM10 DC-DC Converter 1 - 2 5, 12 & 15 10 17
http://www.xppower.com/orderPriceList2.php?seriesid=100619http://www.xppower.com/orderPriceList2.php?seriesid=100619http://www.xppower.com/orderPriceList2.php?seriesid=100615http://www.xppower.com/orderPriceList2.php?seriesid=100615http://www.xppower.com/orderPriceList2.php?seriesid=100615http://www.xppower.com/orderPriceList2.php?seriesid=100615http://www.xppower.com/orderPriceList2.php?seriesid=100615http://www.xppower.com/orderPriceList2.php?seriesid=100527http://www.xppower.com/orderPriceList2.php?seriesid=100224http://www.xppower.com/orderPriceList2.php?seriesid=100526http://www.xppower.com/orderPriceList2.php?seriesid=100527http://www.xppower.com/orderPriceList2.php?seriesid=100224http://www.xppower.com/orderPriceList2.php?seriesid=100527http://www.xppower.com/orderPriceList2.php?seriesid=100528http://www.xppower.com/orderPriceList2.php?seriesid=100224http://www.xppower.com/orderPriceList2.php?seriesid=100528http://www.xppower.com/orderPriceList2.php?seriesid=100492http://www.xppower.com/orderPriceList2.php?seriesid=100638http://www.xppower.com/orderPriceList2.php?seriesid=100493http://www.xppower.com/orderPriceList2.php?seriesid=100309http://www.xppower.com/orderPriceList2.php?seriesid=100651http://www.xppower.com/orderPriceList2.php?seriesid=100652http://www.xppower.com/orderPriceList2.php?seriesid=100652http://www.xppower.com/orderPriceList2.php?seriesid=100508http://www.xppower.com/orderPriceList2.php?seriesid=100533http://www.xppower.com/orderPriceList2.php?seriesid=100536http://www.xppower.com/orderPriceList2.php?seriesid=100536http://www.xppower.com/orderPriceList2.php?seriesid=100538http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100555http://www.xppower.com/orderPriceList2.php?seriesid=100555http://www.xppower.com/orderPriceList2.php?seriesid=100555http://www.xppower.com/orderPriceList2.php?seriesid=100555http://www.xppower.com/orderPriceList2.php?seriesid=100312http://www.xppower.com/orderPriceList2.php?seriesid=100538http://www.xppower.com/orderPriceList2.php?seriesid=100536http://www.xppower.com/orderPriceList2.php?seriesid=100533http://www.xppower.com/orderPriceList2.php?seriesid=100508http://www.xppower.com/orderPriceList2.php?seriesid=100652http://www.xppower.com/orderPriceList2.php?seriesid=100651http://www.xppower.com/orderPriceList2.php?seriesid=100309http://www.xppower.com/orderPriceList2.php?seriesid=100493http://www.xppower.com/orderPriceList2.php?seriesid=100638http://www.xppower.com/orderPriceList2.php?seriesid=100492http://www.xppower.com/orderPriceList2.php?seriesid=100528http://www.xppower.com/orderPriceList2.php?seriesid=100528http://www.xppower.com/orderPriceList2.php?seriesid=100224http://www.xppower.com/orderPriceList2.php?seriesid=100224http://www.xppower.com/orderPriceList2.php?seriesid=100526http://www.xppower.com/orderPriceList2.php?seriesid=100527http://www.xppower.com/orderPriceList2.php?seriesid=100527http://www.xppower.com/orderPriceList2.php?seriesid=100224http://www.xppower.com/orderPriceList2.php?seriesid=100527http://www.xppower.com/orderPriceList2.php?seriesid=100615http://www.xppower.com/orderPriceList2.php?seriesid=1006198/10/2019 Power Supplies Medbrochure
6/20
05
Medical Safety Approvals
Ultra compact from 2 x 3 x 0.95
8/10/2019 Power Supplies Medbrochure
7/20
06
ECS- Specifications
ECP- Specifications
InputInput Voltage 80 to 264 VAC (120-370 VDC), derate linearly from 90 VAC to 80% load at 80 VAC
Input Frequency 47-400 Hz
Input Current 0.75 A typical at 115 VAC full load, 0.45 A typical at 230 VAC full load
Earth Leakage Current 260 A at 264 VAC/60 Hz max, 80/160 A typical 115/230 VAC
No Load Input Power 25-60 W:
8/10/2019 Power Supplies Medbrochure
8/20
07
Medical Safety Approvals (BF)
250 W / 350 W in 3 x 5 Package
80 V - 275 VAC Operation
Analog & PMBus Signal Options (EMH350)
5 V Standby (EMH350)3 Year Warranty
Medical Safety Approvals
Top Fan Cover Option
12 V Fan Output
5V Standby Option
Remote On/Off & Power Good Signal Options3 Year Warranty
EMHSeries250-350 Watts
ECM/CLCSeries140-175 Watts
PMBusThe power management bus (PMBus)
is an open standard power management
protocol with a fully defined command language that facilities
communications with power converters and other devices in a
power system.
140 to 350 Watts Open-frame
Output Voltage Output Current Model Number
12.0 VDC 21.0 A EMH250PS12
18.0 VDC 14.0 A EMH250PS18
24.0 VDC 10.5 A EMH250PS24
48.0 VDC 5.2 A EMH250PS48
12.0 VDC 29.2 A EMH350PS12
18.0 VDC 19.5 A EMH350PS18
24.0 VDC 14.6 A EMH350PS2448.0 VDC 7.3 A EMH350PS48
Output Voltage Output Current Model Number
12.0 VDC 11.7 A ECM140US12
15.0 VDC 9.3 A ECM140US15
18.0 VDC 7.7 A ECM140US18
24.0 VDC 5.8 A ECM140US24
28.0 VDC 5.0 A ECM140US28
48.0 VDC 2.9 A ECM140US48
12.0 VDC 13.9 A CLC175US12-M24.0 VDC 6.9 A CLC175US24-M
48.0 VDC 3.5 A CLC175US48-M
Single Output
8/10/2019 Power Supplies Medbrochure
9/20
8/10/2019 Power Supplies Medbrochure
10/20
09
Medical Safety Approvals
95% Efficiency Convection-cooled
300 W Peak for 500 ms
Class B Radiated & Conducted Emissions
Wide Input Range, 80 - 275 VACCompact 4 x 6 U-Channel
Medical Safety Approvals (BF)
Very High Efficiency Convection-cooled
300 W peak for 500 ms
Class B Radiated and conducted emissions
Wide Input Range, 80 - 275 VACCompact 4 x 6 Open-frame
CCMSeries CCBSeries
250 Watts Convection-cooled
Output Voltage Output Current Model Number
12.0 VDC 20.8 A CCM250PS12
15.0 VDC 16.7 A CCM250PS15
24.0 VDC 10.4 A CCM250PS24
28.0 VDC 8.9 A CCM250PS28
36.0 VDC 6.9 A CCM250PS36
48.0 VDC 5.2 A CCM250PS48
Output Voltage Output Current Model Number
12.0 VDC 20.8 A CCB250PS12
15.0 VDC 16.7 A CCB250PS15
24.0 VDC 10.4 A CCB250PS24
28.0 VDC 8.9 A CCB250PS28
36.0 VDC 6.9 A CCB250PS36
48.0 VDC 5.2 A CCB250PS48
GREENPOWER GREENPOWER
Single Output
8/10/2019 Power Supplies Medbrochure
11/20
10
CCBSeries
The CCB250 series is very close in
design to the CCM250 and offers
many of the same features. The key
differentiators from the CCM250 are
the open frame construction and the
medical BF safety approvals making
this product ideal for applications that
require direct patient contact.
250 Watts Open-frame
CCMSeries
The CCM250 AC-DC medical grade
power supply features industry leading
efficiency of 95% and an absolute
minimum efficiency of 90% at 90 VAC
input and full power. The ultra highefficiency is achieved using a half
bridge resonant ZCS topology
resulting in the highest power
convection-cooled supply packaged in
a 6" x 4" x 1.5" footprint. This high
efficiency can provide up to 70%
waste energy savings when compared
to conventional products, making the
CCM250 a must have product for
energy efficiency equipment.
250 Watts U-Channel
CCM- Specifications
CCB- Specifications
InputInput Voltage 80 to 275 VAC
Input Frequency 47-63 Hz
Input Current 2.4 A at 115 VAC, 1.2 A at 230 VAC
Earth Leakage Current 250 A max at 264 VAC/60 Hz
OutputOutput Voltage 12-48 VDC (See table)
Output Power 250 W continuous, 300 W peak
Minimum Load No minimum load required
Start Up Delay 1 s typical
GeneralEfficiency Up to 95%
Isolation 4000 VAC Input to Output, 1500 VAC Input to Ground, 500 VAC Output to Ground
Switching Frequency PFC: 30 to 500 kHz, Boost: 25.6 kHz, Main: 51.2 kHz
MTBF 365 kHrs typical to MIL-HDBK-217F at 25 C, GB
EnvironmentalOperating Temperature -20 C to +70 C, derate linearly from 100% power at +50 C to 50% power at +70 C
Cooling Convection-cooled
Storage Temperature -40 C to +85 C
Safety & EMCEmissions EN55011/22, level B conducted, EN55011/22, level B radiated
Safety Approvals EN60601-1, UL60601-1, CSA22.2 No. 60601-1, EN60950, UL60950
InputInput Voltage 80 to 275 VAC
Input Frequency 47-63 Hz
Input Current 2.4 A at 115 VAC, 1.2 A at 230 VAC
Leakage Current Earth: 250 A max at 264 VAC/60 Hz, Patient: 100 A max
OutputOutput Voltage 12-48 VDC (See table)
Output Power 250 W continuous, 300 W peak
Minimum Load No minimum load required
Start Up Delay 1 s typical
GeneralEfficiency Up to 95%
Isolation 4000 VAC Input to Output, 1500 VAC Input to Ground, 1500 VAC Output to Ground
Switching Frequency PFC: 30 to 500 kHz, Boost: 25.6 kHz, Main: 51.2 kHz
MTBF 365 kHrs typical to MIL-HDBK-217F at 25 C, GB
EnvironmentalOperating Temperature -10 C to +70 C, derate linearly from 100% power at +50 C to 50% power at +70 C
Cooling Convection-cooled
Storage Temperature -40 C to +85 C
Safety & EMCEmissions EN55011/22, level B conducted, EN55011/22, level A radiated
Safety Approvals EN60601-1, UL60601-1, EN60950, UL60950, BF approved for patient contact.
8/10/2019 Power Supplies Medbrochure
12/20
11
Medical Safety Approvals
High Power Density
Class I and II Construction
ECM40/60 Size: 2 x 4
ECM100 Size: 2.5 x 4.5
3 Year Warranty
ECMSeries40-100 Watts
Medical Safety Approvals
200 W Peak Rating
Up to 110 W Convection Cooling
Class I & Class II Installations
Connector & Mechanical Options
3 Year Warranty
RCLSeries175 Watts
(1) Outputs 3 & 4 are floating, they can be connected externally for positive or
negative output.
40 to 175 Watts Multiple Output
Output 1 Output 2 Output 3 Output 4 ModelV A V A V A V A Number
+5 V 6 A +12 V 2 .0 A ECM40UD21
+5 V 6 A +15 V 1.5 A ECM40UD22
+5V 6 A +12V 2.0 A -12V 0.5 A ECM40UT31
+5 V 6 A +24 V 2.0 A -12 V 0.5 A ECM40UT32
+5V 6 A +15V 1.5 A -15V 0.5 A ECM40UT33
+3.3V 6 A +5V 1.5 A +12V 0.5 A ECM40UT34
+5V 6 A +3.3V 1.5 A +12V 0.5 A ECM40UT35
+5 V 8 A +12 V 3 .0 A ECM60UD21
+5 V 8 A +15 V 2 .5 A ECM60UD22
+5V 8 A +12V 3.0 A -12V 0.5 A ECM60UT31
+5 V 8 A +24 V 1.5 A -12 V 0.5 A ECM60UT32
+5V 8 A +15V 2.5 A -15V 0.5 A ECM60UT33
+3.3V 8 A +5V 1.5 A +12V 0.5 A ECM60UT34
+5V 8 A +3.3V 1.5 A +12V 0.5 A ECM60UT35
+5V 12 A +12V 3.0 A ECM100UD21
+5V 12 A +15V 3.0 A ECM100UD22
+5V 10 A +12V 3.0 A -12V 0.8 A ECM100UT31
+5V 10 A +24V 2.0 A -12V 0.8 A ECM100UT32
+5V 10 A +15V 3.0 A -15V 0.8 A ECM100UT33
+3.3V 10 A +5V 5.0 A +12V 0.8 A ECM100UT34
+5V 10 A +3.3V 5.0 A +12V 0.8 A ECM100UT35+5V 10 A +12V 3.0 A -5V 0.8 A ECM100UT36
+5V 10 A +15V 3.0 A -5V 0.8 A ECM100UT37
+5V 10 A +3.3V 5.0 A +12V 0.8 A -12V 0.5 A ECM100UQ41
+3.3V 10 A +5V 5.0 A +12V 0.8 A -12V 0.5 A ECM100UQ42
+5V 10 A +24V 2.0 A +12V 0.8 A -12V 0.5 A ECM100UQ43
+5V 10 A +24V 2.0 A +15V 0.8 A -15V 0.5 A ECM100UQ44
+5V 10 A +12V 3.0 A -12V 0.8 A -5V 0.5 A ECM100UQ45
+5V 10 A +15V 3.0 A -15V 0.8 A -5V 0.5 A ECM100UQ46
+5V 15 A +12V 8.3 A RCL175PD22
+5V 15 A +12V 6.3 A F12V 2.0 A RCL175PT31(1)
+5V 15 A +15V 4.6 A F15V 2.0 A RCL175PT32(1)
+5V 15 A +3.3V 15 A F15V 2.0 A F15V 2.0 A RCL175PQ43(1)
+5 V 15 A 12 V 5 .5 A F5 V 2 .0 A F12 V 2.0 A RCL175PQ44(1)
+5 V 15 A 15 V 4 .0 A F5 V 2 .0 A F15 V 2.0 A RCL175PQ45(1)
+5V 15 A 24V 3.2 A F12V 2.0 A F12V 2.0 A RCL175PQ46(1)
+5V 15 A 24V 3.0 A F15V 2.0 A F15V 2.0 A RCL175PQ47(1)
8/10/2019 Power Supplies Medbrochure
13/20
12
ECMSeries
The multiple output ECM series provides
a compact medically approved solution
with up to 4 outputs. The 40 W & 60 W
models are packaged in a 2 x 4
footprint, with the 100 W being in a4.5 x 2.5 package.
40-100 Watts Open-frame
RCLSeries
Approved for class I or class II
applications, the RCL series provides a
multiple output medically approved
solution with 175 W of output power.
Available with either dual, triple or
quad outputs and with fully floatingoutputs the RCL provides a flexible
solution for any application requiring
more than one output voltage. The
product also comes with three different
mechanical options.
175 Watts
ECPSeries40-65 Watts Multiple Outputs
Medical Safety Approvals
Low Profile Design
Ultra Compact Size from 2 x 3.5 x 0.9
Dual and Triple Output
8/10/2019 Power Supplies Medbrochure
14/20
13
Medical Safety Approvals
End Fan, Top Fan & U Channel Options
AC OK, Remote On/Off and Active Current Share
Load Dependant Variable Speed Fan
Rugged construction
3 Year Warranty
MHPSeries650-1200 Watts
Medical Safety Approvals
400 W Continuous, 600 W Peak
80 V - 275 VAC Operation
Integral Low Noise Fan
5 V Standby, AC OK and Remote On/Off
3 Year Warranty
FCMSeries400 Watts
Medical Safety ApprovalsLow Profile Supply
Variable Fan Speed To Reduce Audible Noise
AC OK, DC OK, Inhibit & 5 V Standby Supply
Fan Fail & Overtemperature Signals
3 Year Warranty
HPUSeries1500 Watts
400-1500 Watts Enclosed
Output Voltage Output Current Model Number
12.0 VDC 33.3 A FCM400PS12
15.0 VDC 26.6 A FCM400PS15
24.0 VDC 16.6 A FCM400PS24
28.0 VDC 14.2 A FCM400PS28
36.0 VDC 11.1 A FCM400PS36
48.0 VDC 8.3 A FCM400PS48
12.0 VDC 50.0 A MHP650PS12
15.0 VDC 40.0 A MHP650PS15
24.0 VDC 27.0 A MHP650PS24
28.0 VDC 23.0 A MHP650PS28
36.0 VDC 18.0 A MHP650PS36
48.0 VDC 13.5 A MHP650PS48
12.0 VDC 83.0 A MHP1000PS12
15.0 VDC 67.0 A MHP1000PS15
24.0 VDC 50.0 A MHP1000PS24(1)
28.0 VDC 43.0 A MHP1000PS28(1)
36.0 VDC 34.0 A MHP1000PS36(1)
48.0 VDC 25.0 A MHP1000PS48(1)
12.0 VDC 100.0 A HPU1K5PS12
24.0 VDC 63.0 A HPU1K5PS24(2)
48.0 VDC 31.0 A HPU1K5PS48(2)
(1) 180 VAC input = 1200 W.
(2) 180 VAC input = 1500 W.
8/10/2019 Power Supplies Medbrochure
15/20
14
FCM- Specifications
InputI npu t Vol ta ge 80 t o 2 75 VAC
Input Frequency 47- 63 Hz
Input Current 4.1 A at 115 VAC, 2.1 A at 230 VAC
Earth Leakage Current 260 A max at 264 VAC/60 Hz
OutputOutput Voltage 12- 48 VDC (See table)
Output Power 400 W continuous, 600 W peak
Start Up Delay 1 s
GeneralVoltage Adjust 10%
Efficiency 85% typical
Isolation 4000 VAC Input to Output, 1500 VAC
Input to Ground, 500 VAC Output
to Ground
Switching Frequency PFC: 70 kHz, Main: 65 kHz.
MTBF 236 kHrs typical to MIL-HDBK-217F
at 25 C, GB
EnvironmentalOperating Temperature -10 C to +70 C, derate linearly from
100% power at +50 C to 50% power
at +70 C
Cooling Internal fan cooling
Storage Temperature -40 C to +85 C
Safety & EMCEmissions EN55011/22 level B conducted, level
A radiated.
Safety Approvals EN60601-1, UL60601-1, CSA22.2
No. 601-1 per cUL, EN60950,
UL60950
HPU- Specifications
InputI npu t Vol ta ge 85 t o 2 64 VA C
Input Frequency 47- 63 Hz
Input Current 13 A at 115 VAC, 6.5 A at 230 VAC
Earth Leakage Current 260 A max at 264 VAC/60 Hz
OutputOutput Voltage 12- 48 VDC (See table)
Output Power 1200-1500 W (See table)
Start Up Delay 1 s
GeneralEfficiency 90% typical
Isolation 4000 VAC Input to Output, 1500 VAC
Input to Ground, 500 VDC Output
to Ground
Switching Frequency PFC: 70 kHz, Main: 130 kHz.
M TB F 4 70 kH rs ty pi cal t o Tel eco rd ia S R-332
at 25 C, GB
EnvironmentalOperating Temperature -20 C to +70 C, derate linearly from
100% power at +50 C to 50% power
at +70 C
Cooling Internal fan cooling
Storage Temperature -40 C to +85 C
Safety & EMCEmissions EN55011/22 level A conducted, level A
radiated.
Safety Approvals EN60601-1, UL60601-1, CSA22.2 No.
601-1 per cUL, EN60950, UL60950
MHPSeries
The MHP650 and MHP1000 power
supplies provide up to 650 and 1200
W in two compact packages. The
MHP650 comes with three different
mechanical options (U-channel, endfan and top fan) and the MHP1000
comes with in an end fan mechanical
package. Both products employ load
dependant variable speed fans to
reduce audible noise.
650-1200 Watts Enclosed
FCMSeries
The FCM400 power supply providesup to 400 W continuous and 600 peak
output power for up to 0.5 seconds.
Packaged in a compact 4" x 6" x 1.9"
enclosure the FCM400 can easily be
integrated into a wide range of medical
applications. An integral low noise fan
allows for quiet operation and reduces
the audible noise level of the
power supply.
400 Watts Enclosed
HPUSeriesThe HPU is a very low profile 1500 W
AC-DC medical grade power supply. It
has leading edge power density making
it ideal for bulk power applications
where high power is required in a small
space. The HPU is supplied with a
range of signals and control, self cooling
via integral fans and mounting options
on three faces, making it suitable for a
variety of application.
1500 Watts Enclosed
MHP- Specifications
InputInput Voltage 85 to 264 VAC
Input Frequency 47-63 Hz
Input Current 115 VAC: 6.5 A/15.1 A (MHP650/1000), 230 VAC: 3.2 A/10.9 A (MHP650/1000)
Earth Leakage Current 250 A max at 264 VAC/60 Hz
OutputOutput Voltage 12-48 VDC (See table)
Output Power MHP650: 650 W, MHP1000: 1000-1200 W (See table)
Minimum Load No minimum load required
Start Up Delay 500 ms
GeneralVoltage Adjust 10%
Efficiency 85% typical
Isolation 4000 VAC Input to Output, 1500 VAC Input to Ground, 500 VDC Output to Ground
Switching Frequency PFC: 70 kHz, Main: 200 kHz
MTBF 260 kHrs typical to MIL-HDBK-217F at 25 C, GB
EnvironmentalOperating Temperature -20 C to +70 C, derate linearly from 100% power at +50 C to 50% power at +70 C
Cooling In ternal fan cooling or 5.5 m/s with U-Channel
Storage Temperature -40 C to +85 C
Safety & EMCEmissions EN55011/22, level B conducted, EN55011/22, level A radiated
Safety Approvals EN60601-1, UL60601-1, CSA22.2 No. 601-1 per cUL, EN60950, UL60950
8/10/2019 Power Supplies Medbrochure
16/20
15
Medical Safety Approvals
Configurable for Fast Time to Market
Rugged Construction
Extra Power Available at High Line
Intelligent Fan Speed Controller
3 Year Warranty
fleXPower
fleXPower- Specifications
InputI npu t Vol ta ge 85 t o 2 64 VA C
Input Frequency 47- 63 Hz
Input Current See ful l datasheet
Earth Leakage Current 200 A max at 264 VAC/60 Hz
OutputO ut put Vo lta ge 3. 3- 60 VDC (See table)
Output Power 400- 2500 W (See table)
Start Up Delay 2 s
GeneralEfficiency 84% typical
Isolation 4000 VAC Input to Output, 1500 VAC Input to Ground, 250 VDC
Output to GroundSwitching Frequency 45-200 KHz variable
MTBF 225 kHrs typical to MIL-HDBK-217F at 25 C, GB
EnvironmentalOperating Temperature 20 C to +70 C, for operation above +50 C, derate linearly
to 50% load at +70 C. Reverse air option, derate from
+40 C to half load at +60 C
Cooling Internal fan cooling
Storage Temperature -40 C to +85 C
Safety & EMCEmissions EN55011/22 level A conducted, level A radiated
Safety Approvals EN60601-1, UL60601-1, CSA22.2 No. 601-1 per cUL,
EN60950, UL60950
fleXPower
The fleXPower series is a r ange of
modular power supplies which can be
configured into customer specific
solutions for quick delivery of samples,
prototypes and low volumeproduction. There are 11 power
platforms in the series ranging from
400 W to 2500 W and 44 modules
with outputs from 3.3 V to 60 V. As the
name suggests this is a very flexible
and rugged product making it ideal for
critical medical applications.
400-2500 Watts
400-2500 Watts Configurable
Output Single Output Dual OutputSlots
ModelPower Options Options Number
600 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 10 XM4(1)
1200 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 20 XM4DD(2)
700 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 10 XM5(1)
1400 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 20 XM5DD(2)
900 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 10 XM7(1)
1800 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 20 XM7DD(2)
1100 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 12 XM9(1)
2200 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 24 XM9DD(2)
1200 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 14 XM10(1)
2400 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 28 XM10DD(2)
2500 W 3.3 - 60V/2.5 - 60 A 5 - 24V/6 - 10 A 20 XM15(3)
(1)
8/10/2019 Power Supplies Medbrochure
17/20
16
AHM- Specifications
InputI npu t Vol ta ge 90 t o 2 64 VA C
Input Frequency 47- 63 Hz
Input Current See ful l datasheet
Earth Leakage Current 200 A max at 264 VAC/60 Hz
No Load Input Power
8/10/2019 Power Supplies Medbrochure
18/20
JHMSeries
The JHM series has been designed to
provide isolation between applied
parts and live parts of a medical
device. The series consists of 3
ranges, JHM03, JHM06 and JHM10.Each model has reinforced insulation
from primary to secondary, very low
input to output capacitance and
UL/IEC/EN60601-1 safety approvals.
JHMSeriesMedical Safety Approvals
3000 VAC Reinforced Insulation (JHM03/06)
4000 VAC Reinforced Insulation (JHM10)
2 A Patient Leakage Current
Very Low Input to Output Capacitance
3 Year Warranty
JHM- Specifications
InputInput Voltage See table
I npu t C ur ren t 25 A ma x a t 30 V
Patient Leakage Current 2 A
OutputOutput Voltage 5- 15 VDC (See table)
Output Power 3-10 Watts
Start Up Delay 5 ms
GeneralEfficiency 75% to 89% dependent on model
I sol at ion 5 00 0 VA C f or 10 m s ( IEC 60 66 4-1), 4000 VAC for 1 min
reinforced insulation -JHM10, 3000 VAC for 1 min
reinforced insulation-JHM03/06Switching Frequency 180kHz to 1.6MHz variable
MTBF >1 MHrs typical to MIL-HDBK-217F at 25 C, GB
EnvironmentalOperating Temperature -20 C to +100 C, derate linearly from 100% load at
+60 C to no load at +100 C
Cooling Convection-cooled
Storage Temperature -40 C to +100 C
Safety & EMCEmissions EN55011/22 level A conducted & radiated with no external
components
Safety Approvals EN60601-1, UL60601-1, CSA22.2 No. 601-1 per cUL,
EN60950, UL60950
17
3-10 Watts DC-DC Converter
3 Watts
(10-17 Vin)
3 Watts
(20-30 Vin)
6 Watts
(10-17 Vin)
6 Watts
(20-30 Vin)
10 Watts
(4.5-9 Vin)
10 Watts
(9-18Vin)
10 Watts
(18-36Vin)
Output Power Output Voltage Output Current Model Number
5.0 VDC 600 mA JHM0312S05
12.0 VDC 250 mA JHM0312S12
15.0 VDC 200 mA JHM0312S15
12.0 VDC 125 mA JHM0312D12
15.0 VDC 100 mA JHM0312D15
5.0 VDC 600 mA JHM0324S05
12.0 VDC 250 mA JHM0324S12
15.0 VDC 200 mA JHM0324S15
12.0 VDC 125 mA JHM0324D12
15.0 VDC 100 mA JHM0324D15
5.0 VDC 1200 mA JHM0612S05
12.0 VDC 500 mA JHM0612S12
15.0 VDC 400 mA JHM0612S1512.0 VDC 250 mA JHM0612D12
15.0 VDC 200 mA JHM0612D15
5.0 VDC 1200 mA JHM0624S05
12.0 VDC 500 mA JHM0624S12
15.0 VDC 400 mA JHM0624S15
12.0 VDC 250 mA JHM0624D12
15.0 VDC 200 mA JHM0624D15
5.0 VDC 2000 mA JHM1005S05
12.0 VDC 833 mA JHM1005S12
15.0 VDC 666 mA JHM1005S15
5.0 VDC 1000 mA JHM1005D05
12.0 VDC 420 mA JHM1005D12
15.0 VDC 333 mA JHM1005D15
5.0 VDC 2000 mA JHM1012S05
12.0 VDC 833 mA JHM1012S12
15.0 VDC 666 mA JHM1012S15
5.0 VDC 1000 mA JHM1012D05
12.0 VDC 420 mA JHM1012D12
15.0 VDC 333 mA JHM1012D15
5.0 VDC 2000 mA JHM1024S05
12.0 VDC 833 mA JHM1024S12
15.0 VDC 666 mA JHM1024S15
5.0 VDC 1000 mA JHM1024D05
12.0 VDC 420 mA JHM1024D12
15.0 VDC 333 mA JHM1024D15
3-10 Watts DC-DC ConverterHigh Isolation
8/10/2019 Power Supplies Medbrochure
19/20
18
Quick Reference
Leakage Current
TYPE B TYPE BF TYPE CF
NC SFC NC SFC NC SFC
Earth 500 A* 1 mA 500 A* 1 mA 500 A* 1 mA
Enclosure 100 A 500 A* 100 A 500 A* 100 A 500 A*
Patient 100 A 500 A 100 A 500 A 10 A 50 A
Safety ApprovalsIEC60601-1:2005 (3rd Edition) Guidance
The latest version of 60601-1 is the 3rd edition which was first published in December 2005. The standard
has been adapted in the major countries/regions of the world and published as the following versions:EU: EN60601-1:2005
USA: ANSI/AAMI ES 60601-1:2005
Canada: CSA-C22.2 No. 60601-1:08
Currently equipment can be approved to either the 2nd or 3rd editions of the standard, but in June 2012 in
the EU the 2nd edition will be withdrawn and all equipment, both new and old, will need to be approved to
3rd edition. In the USA the withdrawal date is June 2013.
Emission and Immunity SpecificationsIEC55011/55022 Limits for conducted and radiated emissions
IEC61000-3-2 Limits for harmonic current emissions
IEC61000-3-3 Limitation of voltage changes, voltage variations & flicker
IEC61000-4-2 Electrostatic discharge immunity
IEC61000-4-3 Radiated immunity
IEC61000-4-4 Electrical fast transient immunity
IEC61000-4-5 Electrical surge immunity
IEC61000-4-6 Conducted disturbance immunity
IEC61000-4-8 Immunity to power frequency magnetic field
IEC61000-4-11 Immunity to voltage dips, short interruptions and variations on supply line
Isolation & Separation - IEC60601-1:2005
Leakage CurrentsEarth leakage Current flowing in the earth conductor.
Enclosure leakage Current flowing to earth via the patient from the enclosure.
Patient leakage Current flowing to earth via the patient from an applied part.
Patient auxiliary Current flowing between two applied parts.
Insulation
MOOP MOPP
AirClearance CreepageDistance TestVoltage AirClearance CreepageDistance TestVoltage
Basic(1 x MOP)
2.0 mm 3.2 mm 1500 VAC 2.5 mm 4.0 mm 1500 VAC
Double or Reinforced(2 x MOP)
4.0 mm 6.4 mm 3000 VAC 5.0 mm 8.0 mm 4000 VAC
Insulation test voltages based on 250 VAC working voltage. MOP = Means of protection
MOOP = Means of operation protection MOPP = Means of patient protection.
NC = Normal Conditions SFC = Single Fault Conditions
*Patient care equipment maximum earth and enclosure leakage current for
the US is 300 A. Figures quoted are for portable equipment.
Major Impact of 3rd Edition
General requirements for design process
to include risk management process in
accordance with ISO14971. Safety has been broadened from basic
safety to include essential performance.
Collateral standards IEC60601-1-1 and
IEC60601-1-14 have been inserted into
clause 14 and clause 16 of 3rd edition.
Distinction now made between operator
and patient with introduction of MOOP
(Means of Operator Protection) and MOP
(Means Of Patient Protection). Broadly
MOOP follows IEC60950 and MOPP
follows 60601-1 2nd edition. In either
case 2 x MOP (Mean Of Protection) must
be present under normal conditions.
XP Power Plan for 3rd Edition Approval
All current medical grade power supplies
approved to 2nd edition will be re-
approved to 3rd edition by June 2012
(consult sales for detailed plan).
All medical grade power supplies will
comply with MOPP (Means Of Patient
Protection).
To address Risk Management XP has
implemented Risk Management as part o
the design process in accordance with
ISO14971 and factory QMS upgraded
to ISO13485.
IEC60601-1 3rd Edition
Our printers of this guide are
certified by the Forest Stewardship
Council, meaning they are
ethically minded and the paper is
from responsible sources.
8/10/2019 Power Supplies Medbrochure
20/20