This is information on a product in full production. October 2013 DocID024382 Rev 2 1/15 15 STPS20200C Power Schottky diode Datasheet − production data Features • Low forward voltage drop • Very small conduction losses • Negligible switching losses • Extremely fast switching • Low thermal resistance • -40°C minimum operating T j • Insulated package: TO-220FPAB – Insulating voltage: 2000 V DC – Capacitance: 45 pF • ECOPACK ® 2 compliant component Description This device is a dual center tap 200 V Schottky rectifier suited for switch mode power supplies and high frequency DC to DC converters. Packaged in TO-220AB, TO-220AB narrow-leads, TO-220FPAB and D²PAK, it is especially intended for use as secondary rectification in SMPS and is also ideal for all LED lighting applications. Table 1. Device summary Symbol Value I F(AV) 2 x 10 A V RRM 200 V T j(max) 175 °C V F(typ) 0.64 V K K K K K K A2 A2 A2 A2 A1 A1 A1 A1 K A1 A2 TO-220AB STPS20200CT D 2 PAK STPS20200CG-TR TO-220FPAB STPS20200CFP TO-220AB narrow leads STPS20200CTN Diode 1 Diode 2 www.st.com
15
Embed
Power Schottky diode - STMicroelectronics · Power Schottky diode ... narrow leads STPS20200CTN Diode 1 Diode 2 . ... Ordering type Marking Package Weight Base qty Delivery mode
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
This is information on a product in full production.
October 2013 DocID024382 Rev 2 1/15
15
STPS20200C
Power Schottky diode
Datasheet − production data
Features
• Low forward voltage drop
• Very small conduction losses
• Negligible switching losses
• Extremely fast switching
• Low thermal resistance
• -40°C minimum operating Tj
• Insulated package: TO-220FPAB
– Insulating voltage: 2000 V DC
– Capacitance: 45 pF
• ECOPACK®2 compliant component
Description
This device is a dual center tap 200 V Schottky rectifier suited for switch mode power supplies and high frequency DC to DC converters.
Packaged in TO-220AB, TO-220AB narrow-leads, TO-220FPAB and D²PAK, it is especially intended for use as secondary rectification in SMPS and is also ideal for all LED lighting applications.
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
Figure 8. TO-220AB dimension definitions
A
F
D1
J1
H1
∅P
Q
D
L1
Lb
E
e1
e
L20 L30
b1
c
Resin gate0.5 mm max.protrusion(1)
Resin gate0.5 mm max.protrusion(1)
(1) Resin gate position accepted in each of the twoposition shown as well as the symmetrical opposites
Ordering type Marking Package Weight Base qty Delivery mode
STPS20200CT STPS20200CT TO-220AB 2.20 g 50 Tube
STPS20200CTN STPS20200CTNTO-220AB
narrow leads1.90 g 50 Tube
STPS20200CFP STPS20200CFP TO-220FPAB 2.0 g 50 Tube
STPS20200CG-TR STPS20200CG D2PAK 1.48g 1000 Tape and reel
Table 10. Document revision history
Date Revision Changes
11-Apr-2013 1 First issue
16-Oct-2013 2 Updated Table 4.
DocID024382 Rev 2 15/15
STPS20200C
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve theright to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at anytime, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes noliability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of thisdocument refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party productsor services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of suchthird party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWSOF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFESUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONSOR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS ATPURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT ISEXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRYDOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED AREDEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately voidany warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, anyliability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America