POWER LOSS DETAILS OF SOME REGIONS OF TAMIL NADU.

POWER LOSS DETAILS OF SOME REGIONS OF TAMIL NADU

BYT.CHANDAN

G.SUNILV.PRAVEEN KUMAR

Bogus seals Meter tampering Meter bypassing Changing connection Direct tapping from line Check meter, remote meter readers , tamper alarms.

Revolution-pulses. Pulses-modulated , multiplexed. Individually tapped at receiver. Processing by microcontroller.

DIFFERENCE OCCURS ALARM

The sensing unit Phase locked loop Cmos analog switch Buffer Intermediate frequency transformer

Intermediate frequency transformer(100-300) khz

Clipper phase locked loop

Disc rotation-energy consumed. Receiver-carrier. Pulse-counter. Counts six pulses and gives an output

for unit consumed. Counter-decimal counter-display unit.

Final and most important one. Manipulation and processing work-

microcontroller. Identification and indication- alarm.

NEED FOR MICRO CONTROLLER Simple system-microprocessor is

undesirable. interfacing.

AT89c51 is a 40 pin dip IC.

EPROM(electrically programmed read only memory) of 4 kilobytes.

Ram of 128 bytes. Input output

ports(p0,p1,p2,p3).

Set value-p1 by means of DIP switches. Pulses from energy meter are given to

respective pins of port 3. Alarm to 39th pin of IC. No external memory. Program- continuous counting of units and

simultaneous comparisions error predicted-alarm.

Digital meter–simplifies our work. Highly accurate , low loss and economical

one. Helps vigilance squad to control theft easily

and quickly. Extent of theft can be identified. Compact size, reliability, lightweight for quick

operation and high accuracy makes the system more effective.

Distance coverage-repeaters. atmospheric noises. A maintenance staff of highly skilled

and high trained personnel are needed.

Our idea is a boon to electricity board.

The crime of stealing power may be brought to end and there by a new bloom may be expected in the economy of our motherland.