Position Transducers with return spring potentiometric up to 100 mm Series TR, TRS Special features • long life up to 100 Mio. movements, depending on application • outstanding linearity - up to 0.075 % • cable or connector version available • compatible to standard probe tips • double-sided supported actuating rot • insensitive to shock and vibration Position transducers with resi- stive and collector track made from conductive plastic - with internal return spring - for direct measurement of travel without form lock fixing to detect positions of fixed devi- ces under test, for tolerance measurement as well as for continnuous contour gauging. The push rod is supported on both ends by metal glide bea- rings, allowing high lateral for- ces on the tip of the rod. The robustnes and the com- pact housing design make this series a reliable solution for the industrial environment. The design of the rear end stop nut of the push rod sim- plifies the mechanical connec- tion of actuators like pneuma- tic cylinders and solenoids. Description Housing aluminium, anodized Mounting adjustable clamps Actuating rod stainless steel AISI 303, with anti-twist safeguard, intern. thread M2.5x6 Probe tip stainless steel with external thread M2.5 and pressed-in hardened metal ball Bearings both ends in DU plastic bearings Resistance element conductive plastic Wiper assembly precious metal multi-finger wiper, elastomer-damped Electrical connections type TR 3-wire PVC-cable, 3 x 0,14 mm 2 , shielded, 2 m length type TRS 5-pin round connector IEC 130-9
4
Embed
Position Transducers with return spring potentiometric … · Position Transducers with return spring potentiometric up to100 mm Series TR, ... ces under test, ... Maximum permitted
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Position Transducers with return springpotentiometricup to 100 mm
Series TR, TRS
Special features• long life up to 100 Mio.movements, depending onapplication• outstanding linearity - up to0.075 %• cable or connector versionavailable• compatible to standardprobe tips• double-sided supportedactuating rot• insensitive to shock andvibration
Position transducers with resi-stive and collector track madefrom conductive plastic - withinternal return spring - fordirect measurement of travelwithout form lock fixing todetect positions of fixed devi-ces under test, for tolerancemeasurement as well as forcontinnuous contour gauging.
The push rod is supported onboth ends by metal glide bea-rings, allowing high lateral for-ces on the tip of the rod. The robustnes and the com-pact housing design makethis series a reliable solutionfor the industrial environment.The design of the rear endstop nut of the push rod sim-plifies the mechanical connec-tion of actuators like pneuma-tic cylinders and solenoids.
Description
Housing aluminium, anodized
Mounting adjustable clamps
Actuating rod stainless steel AISI 303, with anti-twist safeguard,intern. thread M2.5x6
Probe tip stainless steel with external thread M2.5and pressed-in hardened metal ball
Bearings both ends in DU plastic bearings
Resistance element conductive plastic
Wiper assembly precious metal multi-finger wiper, elastomer-damped
Electrical connections type TR 3-wire PVC-cable, 3 x 0,14 mm2, shielded, 2 m lengthtype TRS 5-pin round connector IEC 130-9
Type designations TR-0010 TR-0025 TR-0050 TR-0075 TR-0100 with cableTRS-0025 TRS-0050 TRS-0075 TRS-0100 with plug
Electrical Data
Defined electrical range 10 25 50 75 100 mm
Electrical stroke 12 27 52 77 102 mm
Nominal resistance 1 1 5 5 5 kΩ
Resistance tolerance 20 ± %
Independent linearity 0.25 0.2 0.15 0.1 0.075 ± %
Repeatability 0.002 mm
Recommended operating wiper current ≤1 µA
Max. wiper current in case of malfunction 10 m
Max. permissible applied voltage 24 42 42 42 42 V
Effective temperature coefficient of the output-to-applied voltage ratio typical 5 ppm/K
Insulation resistance (500 VDC) ≥ 10 MΩ
Dielectric strength(500 VAC, 50 Hz) ≤ 100 µA
Mechanical Data
Body length (dimension A) 48 63 94.4 134.4 166 +1mm
Mechanical stroke (dimension B) 15 30 55 80 105 ±1.5 mm
Dimension C (at TR) 7 12 12 12 12 mm
Dimension D (at TR) 6 32 32 32 32 mm
Weight with cable 80 120 150 180 200 gwith plug 74 100 128 150 g
Weight of actuator with coupling 18 25 36 48 57 g
Operating force extended (horizontal) ≤ 3.5 ≤ 2.5 ≤ 2.5 ≤ 2.5 ≤ 2.5 NOperating force retracted (horizontal) ≤ 5.0 ≤ 5.0 ≤ 5.0 ≤ 5.0 ≤ 5.0 N
Operating force to end stop max. 5 N
Operating frequency max. 20 18 14 11 10 Hz(Data refer to critical application “probe tip upwards”)
Maximum permitted torque for fixing screws 140 Ncm
ImportantAll values specified in this datasheet for linearity, lifetime andtemperature coefficient areonly valid for a sensor used asa voltage divider with virtuallyno load applied to the wiper(le ≤ 1 µA).
Recommended accessoriesProcess-controlled indicatorsMAP... with display.
Signal conditioner MUP.../MUK … with supply voltage24 V and standard output signals.