DGIWG - 109 DGIWG Portrayal Standard for Multinational Geospatial Co-production Program (MGCP) Data Document Identifier: STD-DP-09-048-Portrayal_Standard_for _MGCP_Data Publication Date: 17 December 2009 Edition: 1.0.0 Edition Date: 17 November 2009 Responsible Party: DGIWG Audience: Approved for public release Abstract: Defines symbols and portrayal rules to portray a topographic map using MGCP data Copyright: (C) Copyright DGIWG, some rights reserved - (CC) (By:) Attribution You are free: - to copy, distribute, display, and perform/execute the work - to make derivative works - to make commercial use of the work Under the following conditions: - (By:) Attribution. You must give the original author (DGIWG) credit. - For any reuse or distribution, you must make clear to others the license terms of this work. Any of these conditions can be waived if you get permission from the copyright holder DGIWG. Your fair use and other rights are in no way affected by the above. This is a human-readable summary of the Legal Code (the full license is available from Creative Commons <http://creativecommons.org/licenses/by/2.0/ >).
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DGIWG - 109
DGIWG Portrayal Standard for Multinational Geospatial Co-production Program (MGCP) Data
Abstract: Defines symbols and portrayal rules to portray a topographic map using MGCP data
Copyright: (C) Copyright DGIWG, some rights reserved - (CC) (By:) Attribution
You are free: - to copy, distribute, display, and perform/execute the work - to make derivative works - to make commercial use of the work Under the following conditions: - (By:) Attribution. You must give the original author (DGIWG)
credit. - For any reuse or distribution, you must make clear to others the
license terms of this work. Any of these conditions can be waived if you get permission from the
copyright holder DGIWG. Your fair use and other rights are in no way affected by the above. This is a human-readable summary of the Legal Code (the full license
is available from Creative Commons <http://creativecommons.org/licenses/by/2.0/ >).
6.1 MGCP Symbols .................................................................................................................................86.1.1 Symbol Information .......................................................................................................................86.1.2 Symbol Graphic .......................................................................................................................... 106.1.3 Symbol Portrayal Rules .............................................................................................................. 116.1.4 Colour ......................................................................................................................................... 226.2 MGCP 50K Label Information ......................................................................................................... 236.3 Text Characteristics ........................................................................................................................ 246.3.1 Type Placement ......................................................................................................................... 246.3.2 Type Font ................................................................................................................................ ... 25
MGCP Symbols ....................................................................................................................... A-1Colour ...................................................................................................................................... B-1MGCP50K Label Information ................................................................................................... C-1Text Characteristics ................................................................................................................. D-1Area Elements ......................................................................................................................... E-1Line Elements ........................................................................................................................... F-1Point Elements ........................................................................................................................ G-1Detailed Drawing Instructions .................................................................................................. H-1Patterns ..................................................................................................................................... I-1Conformance ............................................................................................................................ J-1Additional information .............................................................................................................. K-1
DN: 09-048 17 November 2009
3
List of Tables Table Page
Table 1 – SWISS742 to Zurich Font Mapping 16
List of Annexes
Page Annex A – MGCP Symbols A-1 Annex B – Colour B-1 Annex C – MGCP 50K Label Information C-1 Annex D – Text Characteristics D-1 Annex E – Area Elements E-1 Annex F – Line Elements F-1 Annex G – Point Elements G-1 Annex H – Detailed Drawing Instructions H-1 Annex I – Patterns I-1 Annex J – Conformance J-1 Annex K – Additional Information K-1 Index L-1
DN: 09-048 17 November 2009
4
1 Introduction
Multinational Geospatial Co-production Program (MGCP) is a multinational program to collect geospatial data worldwide, concentrating on areas where little data currently exists. The MGCP data is collected in accordance with the criteria established in the MGCP Technical Reference Document (TRD). The MGCP is focused on data collection rather than portrayal of that data. This DGIWG standard is intended to provide portrayal requirements for MGCP data that can be used to produce a topographic line map. The portrayal rules that associate geospatial feature/attribute data instances with symbol specifications are based on the MGCP Feature Catalogue. The symbol specifications defined in this standard provide information about symbol graphics that vendors can implement in their own systems.
2 Scope
The scope of this standard is to provide portrayal rules and portrayal specifications for features in the MGCP Feature Catalogue. Selected attribute information on these features must also be portrayed. Portrayal information consists of portrayal rules (which associate data to symbols) and symbol specifications (that define symbols).
3 Conformance
This clause discusses conformance to the MGCP Symbology Standard. See Annex J for the checklist of normative conformance.
4 Normative references
This document references several other documents for additional information:
a. Multinational Geospatial Co-production Program (MGCP) Technical Requirements Document (TRD)
b DGIWG Feature Data Dictionary (DFDD)
Copies of the document are available from https://www.dgiwg.org/FAD/
c MIL-STD-2402, Mapping, Charting, and Geodesy (MC&G) Symbols for Graphic Products.
d. MIL-STD-2410, Mapping, Charting, and Geodesy (MC&G) Reproduction and Printing
e. MIL-T-89301A, 1:50,000 Scale Topographic Maps
Copies of these documents are available from: http://assist.daps.dla.mil/quicksearch/ f. Pantone Colours Information on Pantone colours are available at http://www.pantone.com
Attribute A characteristic of a feature. Area - Fill A fill screen or pattern imprinted within an area feature. Area - Pattern
A unique and continuous graphic pattern depicted within an area feature. Area patterns applicable to this standard are defined in MIL-STD-2410.
Arrow A symbol or component of a symbol indicating direction, or a vector.
Cap
A unique symbol appended to a basic square, circle or rectangle that indicates a specific function or property.
Casing
Two parallel lines representing a linear feature. Colour The quality of an object or substance with respect to light reflected by the object, usually
determined visually by measurement of hue, saturation, and brightness of the reflected light; saturation or chroma; hue.
Colour Token
A name by which a colour is known. Colour tokens are associated with different colours optimized for the viewing condition, such as red light readable, or blue-green light readable.
Dash Spacing
The distance between two consecutive dashes. Default Portrayal The symbol to be applied to a feature/delineation if no portrayal rule evaluates to be true
for that feature instance. Distance between lines/line spacing
Distance measured from closest edges of two lines. Feature
An abstraction of a real world phenomenon. Fill
The appropriate colour or pattern existing within or overprinting the symbol. Information box/facility box A permanent box that is printed on the product and contains a variety of information. The
box height and width will vary in size to accommodate varying text information.
DN: 09-048 17 November 2009
6
Label Labels consist of a variety of terminology and abbreviations, descriptive, or identifying, that are either free-standing (geographic names, text description), or directly associated with a graphic symbol (point, line, area). A label box, or “window” directly around an attribute code, i.e., NAM on the symbol graphic indicates that variable text is required in that position, when known.
Lower case
All letters of a word or words are in lower case text. All numbers are considered lower case text in this standard.
Leader line
A line leading from a location point or symbol to the supporting information or text label. Lineweight
The thickness of a line (in millimeters) measured between outside edges. Line Fill
A fill screen imprinted between the bounding lines of a cased line symbol. Line Style
A group of parameters (e.g. line weight, colour, dash length, dash spacing) which defines the appearance of the symbology (or portion of a symbology) applied to a linear element.
Mixed case
The first letter in the first word entry is a capital letter, followed by all lower case text. Open square
An unfilled square whose dimensions are measured across the square, outside perimeter edge to outside perimeter edge.
Origin (of symbol) The place on a symbol that corresponds to the geographic location of the object it
represents. Perimeter
The limits of an areal feature as centred on the peripheral edge of that feature. Portray Nothing A portrayal rule for the unique case where a feature included in a dataset is not to be
portrayed. The symbol specification is null. Portrayal
The presentation of information to users. Portrayal catalogue
A collection of all defined portrayals. Portrayal rule
A rule that is applied to the feature to determine which portrayal specification to use. Portrayal specification
DN: 09-048 17 November 2009
7
A collection of operations applied to the feature instance to portray it. Screen
A regular pattern of dots, defined by a predetermined percentage (100% being solid) used to create tones of a given colour.
Shape
A unique graphic symbol with a fixed geometry and used primarily for point features. Shape specifications are defined in Annex H.
Symbol
An object that represents information. Symbol element
A component of a symbol. A symbol can be comprised of one symbol element or multiple symbol elements.
Symbol parameter
Basic drawing instructions needed to construct the symbol graphic. Tick
A short line located at specific intervals along a linear symbol and normally positioned perpendicular to that line.
Tick interval
Distance between the centres of each repeating tick or set of ticks along a line. Tick spacing
Distance between the centres of each tick in a set of two or more ticks. Type
The letters, numbers, diacritics, etc, associated with labels. Type size
The size of type, measured in point size. Type style
Specifications on capitalization, and appearance of the type, such as normal, light, bold, italic and condensed.
Upper case
All letters of a word or words are in capital letters. Wing tick
A short angular tick located at the endpoint of a linear or point symbol.
6 Symbol Requirements
This standard provides a comprehensive listing of symbols for the portrayal of Multinational Geospatial Co-production Program (MGCP) data on topographic maps. The portrayal information is presented in Annex A. Subsequent Annexes provide additional supporting information and are described in the following sections.
DN: 09-048 17 November 2009
8
6.1
MGCP Symbols
This Annex provides the majority of the symbol portrayal information including symbol parameter definitions, portrayal rules, and indications of labeling requirements. The Symbol Information section contains the detailed parameters of the symbol graphic while the Symbol Portrayal Rules section provides the rule criteria necessary to support the symbol selection. The information is organized alphabetically based on the MGCP Feature Name and then further ordered within each feature grouping by delineation (i.e. Area, Line, Point). The Index provides a cross reference of Feature Code to Feature Description.
6.1.1
Symbol Information
The Symbol Information section describes in detail the symbol graphic elements. Included is a graphic representation, descriptive name, placement instructions, an indication whether labeling is required (yes/no), element parameters including dimension information, colour, etc. as well as details regarding how the symbol is constructed as a group. The Apply Label to Symbol? field contains either Yes or No value. A No value indicates that the symbol instance does not require any label to be placed. A Yes value indicates that this symbol is a candidate for labeling. The label information can be found by referencing the Feature Name and Rule Reference in Annex C Label Information. A symbol may be composed of one or more symbol elements. For each symbol element, the following information is provided.
• Element Name - A short, descriptive name for the symbol graphic. • Element Reference – A unique element identifier for each symbol in the MGCP Symbol
Standard. • Element Type – Identifies whether the symbol is an area, line, or point symbol. The
types may be further detailed as Line-Complex, Point-Simple, etc. Descriptions of these element types are provided in subsequent paragraphs.
• Description – A textual description of the symbol. • Colour Token – A name describing the colour to apply to the symbol element. • Parameters – The specifications for the symbol element. Specific information is
dependent on what type of symbol element is involved. The Parameters section provides the basic instructions needed to construct the symbol graphic. These parameters are specified at the element level. The following standard element parameters are used to specify the various elements of the symbol graphic. Point – Simple
Line – Complex • Line Style • Line Style 2 • Line Style 3 • Line Style 4 • Fix at Start • Fix at Centre • Fix at End • Repeating Point • Repeating Point Interval • Repeating Point 2 • Repeating Point 2 Interval • Repeating Point 3 • Repeating Point 3 Interval • Repeating Point 4 • Repeating Point 4 Interval • Note
Area – Fill • Screen Angle • Note
Area – Pattern • Colour Token • Area Pattern • Note
Area – Complex • Area Pattern 1 • Area Pattern 2 • Note
DN: 09-048 17 November 2009
10
6.1.2
Symbol Graphic
Sample Symbol Information and drawing instructions from Annex A
Each symbol in this standard is shown with a graphic. The graphic is intended to give a general representation of the symbols appearance in order to aid in understanding the drawing instructions in the symbol parameters. Many of the graphics are shown in an enlarged size compared to what would appear on a topographic map, to make the components of the symbol graphic more visible. Implementers of this standard should develop symbols based on the specifications provided in the symbol parameters, NOT the appearance or size of the symbol graphic. The line patterns and area patterns shown in this standard are also only approximations. Refer to MIL-STD-2410 for examples of actual line and area patterns.
Sample default symbol from Annex A
For each feature class, a default (or “catch-all”) symbol has been identified with a green checkmark in the symbol graphic box ( ). A default (or “catch-all”) symbol has been identified so that all instances of a given feature class delineation will be symbolized even if their attribution is insufficient to meet the portrayal criteria.
Sample symbol portrayal rule from Annex A
In the case where the attribution does not meet any of the criteria defined in the portrayal rules, the default symbol will be applied. There are a number of symbols in the MGCP Symbology Standard which serve as both a default symbol and a symbol which is applied based upon
DN: 09-048 17 November 2009
11
attribute values. In these cases, rather than repeat a symbol definition in the standard multiple times, the default symbol’s portrayal rule will have a criterion. In this situation, the feature class instance will be symbolized with the symbol if its attribute values match the portrayal rule criterion or if no attribute criteria are met it will receive the default symbol. Note: It is anticipated that individual requirements will dictate whether or not a “catch-all” symbol will be utilized on a particular implementation. The green check mark indicates the symbol to be used as a default symbol if one is desired.
6.1.3
Symbol Portrayal Rules
Sample symbol portrayal rule from Annex A
The Symbol Portrayal Rules section directly follows the Symbol Information parameters in the Annex and provides the portrayal rule information for the selection of the preceding symbol graphic. Portrayal rules are rules that indicate the condition in which the symbol is selected. They associate an instance of geospatial data with a particular symbol. In some cases the Criteria column is intentionally blank. In other cases, the Criteria column is populated indicating that specific attribute conditions are required for that particular symbol to be associated with a particular feature instance.
Sample symbol portrayal rule from Annex A (empty Criteria column)
When a feature delineation has more than one possible symbol (e.g. linear roads, point buildings, etc.), then more than one rule will exist for the feature delineation. A feature instance should match one and only one criterion, if no matches are found then the feature instance will receive the default symbol described in the previous section. Attributes included in the Criteria field are based on the MGCP TRD and appear in all upper case. The Definitions of the features and attributes in the MGCP TRD are based on the DGIWG Feature Data Dictionary (DFDD).
DN: 09-048 17 November 2009
12
Sample of multiple symbols and rules for a feature class from Annex A
In some cases non-MGCP feature classes (e.g. Elevation Contour, Spot Elevation, International Date Line, etc.) and non-MGCP attributes (e.g. Hypsography Portrayal Type, Elevation Surface Category, Accuracy (Spot Elevation)) have been included in the MGCP Symbology Standard. These additional features and/or attributes were specifically requested to be included in order to improve the quality of the Topographic map. When these additional, non-MGCP features and/or attributes have been included, a descriptive name and/or value has been used since a specific data model was not available. It is expected that the feature class name and/or attribute names and possible values will need to be updated by an implementer in order to match the data model containing the non-MGCP data. The syntax utilized in the portrayal rule is based on the Structured Query Language (SQL) and thereby is easily interpreted by implementation software applications. The symbol portrayal parameters are defined as follows:
• Product – Product code associated with the portrayal rule, in this case 1:50,000 scale MGCP.
• Feature – The feature code and delineation associated with the portrayal rule as specified by the MGCP TRD. The feature code is prefixed by “A”, “L”, or “P” indicating an area feature, line feature, or point feature respectively.
• Rule Reference – Static Unique identifier associated with the rule. Used to link the entry to entries in other Annexes.
• Description – Textual description of the portrayal rule.
DN: 09-048 17 November 2009
13
• Criteria – Attribute information that identifies the specific symbol. This combined with the feature and delineation associate a particular symbol to an instance of MGCP geospatial data.
The Symbol Rule Criteria is based on SQL syntax. Attribute names are indicated by all upper case text such as FUN, GAW, GLT, etc. Operators are generally defined as follows:
= is equal <> is not equal > greater than < less than >= greater than or equal <= less then or equal is Null attribute is not populated
Other syntax operators
( ) used to group like attributes or indicate precedence or indicates true if at least one of the conditions is true and indicates true if all conditions are true
DN: 09-048 17 November 2009
14
Sample To help further explain the portrayal rule processing, the following sample use cases have been developed. Case 1: Linear river feature (BH140) with the HYP (Hydrologic Persistence) attribute set to 1 (Perennial) Attributes used in symbol portrayal rule: HYP
HYP Attribute (Mandatory for Linear delineation): 0 Unknown 1 Perennial 2 Intermittent 4 Dry
Symbolize with LN_Cyan_River_Perennial & remove from further symbolization consideration
Yes HYP = 1 ?
No
Symbolize with LN_Cyan_River_Non-perennial & remove from further symbolization consideration
DN: 09-048 17 November 2009
15
Does HYP = 1? Yes, then symbolize with the LN_Cyan_River_Perennial symbol and remove feature instance from further symbolization consideration;
Case 2: Area crop land feature (EA010) with the CSP (Crop Species) attribute set to 16 (Grape) and the PPO (Product) attribute set to 999 (Other) Attributes used in symbol portrayal rule: CSP, PPO
CSP Attribute (Optional for Area delineation): PPO Attribute (Optional for Area delineation): 0 Unknown 0 Unknown 13 Dry Crop 7 Banana 15 Fruit Tree 20 Coffee 16 Grape 28 Cotton 18 Hop 44 Fruit 999 Other 79 Palm
94 Rubber 111 Sugar 117 Tobacco 999 Other
Symbol Portrayal Rules: AR_Green362-7_Cropland_DryCrops (Default) CSP = 13
AR_Green362_Cropland_Orchard (CSP = 15) or (PPO = 7 or PPO = 20 or PPO = 28 or PPO = 44 or PPO = 79 or PPO = 94 or PPO = 111 or PPO = 117)
AR_Green362_Cropland_Vineyard (CSP = 16 or CSP = 18)
DN: 09-048 17 November 2009
16
AEA010
CSP = 16 PPO = 999
Symbolize with AR_Green362-7_Cropland_DryCrops & remove from further symbolization consideration
Yes CSP = 13?
No
(CSP = 15) or (PPO = 7 or PPO = 20 or PPO = 28 or PPO = 44 or PPO = 79 or PPO = 94 or PPO = 111 or PPO
= 117)?
No
Yes Symbolize with AR_Green362_Cropland_Orchard & remove from further symbolization consideration
CSP = 16 or CSP =
18?
Yes Symbolize with AR_Green362_Cropland_Vineyard & remove from further symbolization consideration
No Symbolize with default symbol AR_Green362_Cropland_DryCrops & remove from further symbolization consideration
DN: 09-048 17 November 2009
17
Processing: - Does CSP = 13? No, then check next rule. - Does (CSP = 15) or (PPO = 7 or PPO = 20 or PPO = 28 or PPO = 44 or PPO = 79 or PPO = 94 or PPO = 111 or PPO = 117)?
No, then check next rule. - Does (CSP = 16 or CSP = 18)? Yes, then symbolize with AR_Green362_Cropland_Vineyard and remove feature instance from
further symbolization consideration. Case 3: Area wood feature (EC030) with the DMT (Canopy Cover) attribute unpopulated (Null) and the TRE (Foliage Type) attribute set to 0 (Unknown) and the VSP (Vegetation Species) attribute set to 0 (Unknown). Attributes used in symbol portrayal rule: DMT, TRE, VSP
DMT Attribute TRE Attribute VSP Attribute (Optional for Area delineation): (Mandatory for Area delineation): (Mandatory for Area delineation):
19 Mangrove 22 Nipa 25 Palm 999 Other Symbol Portrayal Rules:
DN: 09-048 17 November 2009
18
AR_Green362-31_Woodland_Evergreen (Default) (DMT >= 51) and (TRE = 2) and (VSP = 4 or VSP =25 or VSP = 11 or VSP = 8 or VSP = 999 or VSP = 10)
AR_Green362-31_Woodland_Deciduous (DMT >= 51) and (TRE = 1) AR_Green362-31_Woodland_Mixed (DMT >= 51) and (TRE = 3) AR_Green362_Woodland_ScatteredTrees (DMT>=25 and DMT<51) and (VSP<>19 and VSP<>22) AR_Green362_Mangrove (TRE = 2) and (VSP = 19) AR_Green362_NipaPalm (TRE = 2) and (VSP = 22)
DN: 09-048 17 November 2009
19
Symbolize with AR_Green362-31_Woodland_Evergreen & remove from further symbolization consideration
DMT >= 51 and (TRE = 1)?
No
Yes (DMT >= 51) and (TRE = 2) and (VSP = 4 or VSP =25 or VSP = 11 or VSP = 8 or VSP = 999 or VSP = 10)?
Symbolize with AR_Green362-31_Woodland_Deciduous & remove from further symbolization consideration
Symbolize with AR_Green362-31_Woodland_Mixed & remove from further symbolization consideration
Yes
No
AEC030
DMT = Null TRE = 0 VSP = 0
DMT >= 51 and (TRE = 3)?
Yes
No
DN: 09-048 17 November 2009
20
DMT >= 25 and DMT < 51) and (VSP <> 19 and VSP
<> 22)?
No
Symbolize with AR_Green362_Woodland_ScatterredTrees & remove from further symbolization consideration
TRE = 2 and VSP = 19?
Symbolize with AR_Green362_Woodland_Mangrove & remove from further symbolization consideration
Yes
No
TRE = 2 and VSP = 22?
Symbolize with AR_Green362_Woodland_NipaPalm & remove from further symbolization consideration
Yes
No Symbolize with default symbol AR_Green362-31_Woodland_Evergreen & remove from further symbolization consideration
No
Yes
DN: 09-048 17 November 2009
21
Processing: - Does (DMT >= 51) and (TRE = 2) and (VSP = 4 or VSP =25 or VSP = 11 or VSP = 8 or VSP = 999 or VSP = 10)? No, then check
next rule. - Does DMT >= 51 and (TRE = 1)? No, then check next rule. - Does DMT >= 51 and (TRE = 3)? No, then check next rule. - Does DMT >= 25 and DMT < 51) and (VSP <> 19 and VSP <> 22)? No, then check next rule. - Does TRE = 2 and VSP = 19? No, then check next rule. - Does TRE = 2 and VSP = 22? No, then since last rule and no matches were found, symbolize with defined default symbol
(AR_Green362-31_Woodland_Evergreen).
DN: 09-048 17 November 2009
22
Do Not Portray Certain features in the MGCP dataset are not intended to be portrayed on the MGCP50K product. These include:
A particular symbol may be one colour, or composed of multiple colours. Labels are generally specified in one colour. Colours can be specified using several methodologies.
• U.S. Department of Defense Standard Printing Color Catalog for Mapping, Charting, Geodetic Data and Related Products, referred to as “SPC” is a methodology used in the U.S DOD to specify spot colours, which are unique mixtures of inks. MIL-STD-2402 uses SPC colour specifications.
• Pantone colours – Pantone colours are commonly used in the printing industry and are
based on specific mixes of inks. They are sometimes referred to as “spot” colours. Each pantone colour has an identifier assigned to it.
• CMYK – Identifies the percentage of Cyan, Magenta, Yellow and Black (key) that is used
to generate a specific colour in process lithographic printing. Process printing allows a wide variety of colours to be produced from these three primary colours and the black.
• RGB – Red, Green, Blue is a common methodology for specifying colours on digital
displays, giving the intensity of the respective colour guns on a CRT monitor. Each colour intensity ranges from 0 to 255. Colour is additive, so 0 is no colour, and 255 is maximum colour.
The Colour Token definitions utilized for this standard are provided in Annex B. This Annex provides a mapping from a specific colour token to Pantone colour names, the MIL-STD-2402 based SPC Ink colours, CMYK and RGB values. This mapping allows considerable flexibility in specifying equivalent colours in a variety of methodologies. Colour tokens are used to specify generic names of colours for symbol elements. Colour tokens can be replaced with different tokens if maps for different viewing conditions are needed. For example, different viewing conditions may be red light readable, or blue/green light readable. The use of a Colour Token methodology provides for the greatest degree of flexibility at
DN: 09-048 17 November 2009
23
implementation to provide for an easy adaptation to various colour needs. It further allows for colours to be defined by the software applications as necessary to fulfill product requirements. Colours in Annex A and Annex D are specified for each symbol element by Colour Token. Annex B provides a listing of Pantone colours, CMYK values and RGB values that are applicable to MGCP 50K product. The colour token values used in this Standard can be mapped to this table to determine the CMYK and RGB values. When MGCP member nations exchange digital files of finished map products in Portable Document Format (PDF), it is important to note that specifying colours using the spot colour channels in the PDF allows for much greater flexibility in the lithographic printing of the map. If colours are specified only in CMYK, then four-colour process printing is the only printing option available and printing for red or green light readability may not be possible.
6.2
MGCP 50K Label Information
Labeling can be used to identify or assist in identification of the meaning of symbols, and also may supply additional information about the feature being portrayed. Labeling requirements for symbols are identified in the symbol specification. Labels can be of the following types:
• Fixed label – the symbol has a label, and the content of the label is fixed, for example, the label “Ferry” on a ferry crossing, or “Transformer yard” on a power substation.
• Variable label portraying attribute – the content of the label changes, depending on attribute information being portrayed. An example would be showing the mine type [MIN] label on a mine, such as “Open case”, “Placer”, “Strip mine”, etc. Another example would be to show the name of a feature [NAM] as a label, for example, “Olympic Stadium”, or “Central Park”.
• Variable label derived from attribute – the content of a label changes based on the attribute information, but the text of the label is not the attribute value. An example would be a mine type [MIN] of 8 - Peatery being labeled “Peat cuttings”.
• Combination – a series of labels of the various types listed above. The MGCP 50K Label Information section is sorted alphabetically by Feature Name and Rule Reference. This information is product specific. Annex C is structured to accommodate the addition of future products such as MGCP 100K for example. The parameters specified are as follows:
• Rule Reference – Rule Reference link from Annex A. • Description – Textual description of the label. • Additional Labeling Criteria – Criteria to further refine the label placement. • Label string – The content of the label, which can be fixed text, variable label portraying
attribute, varying label derived from attribute, or a combination of these. • Characteristics – A reference to the applicable text description information in Annex D.
This MGCP 50K Label Information Annex identifies the label criteria and label characteristics which are relevant to a particular symbol. The link to Annex A – MGCP Symbols is the Feature Name and Rule Reference. The link from this Annex to Annex D - Text Characteristics is the entry(s) listed in the characteristics column. There is a one to one link from each label element to the Text Characteristics table. For example, if the Label String is [NAM] [FUN] the Characteristics column must have 2 entries separated by a comma (e.g 1,2). These entries may
DN: 09-048 17 November 2009
24
point to the same row in the Text Characteristics Annex or different rows depending on the required characteristic of that label element.
6.3
Text Characteristics
The Text Characteristics table in Annex D contains information specific to the text characters. This information contains colour, size, case, and style parameters. The parameters specified are as follows:
• Text Characteristic # - Reference to link the characteristics to the Label Information in Annex C.
• Colour Token – Colour Token for the text string. • Font Style – Indication of Condensed, Light Condensed, or Regular. • Style – Indication of Bold, Italics or Underline• Font Size – Point (PT) size of the text string.
.
• Case – Indication of capitalization. Valid values are Upper case, Lower case, and Mixed case.
Capitalization of label information on a symbol follows the general structure below:
• The first letter is capitalized, for example, “Ferry”. • For multiple words, the first letter of the first word is capitalized, for example,
“Transformer yard”. • For names, the first letter in each word is capitalized, for example, “Yellowstone National
Park”. Note that in some cases, the text string may have to be modified depending on whether attribute information is portrayed. For example, the label for a bog is [BOC] “bog”, but if the Bog Type (BOC) is unknown or other, it would not make sense to show “Unknown bog” or “Other bog”, and the BOC label would just be omitted. Then the “bog” would be the first word in the label, and should be capitalized “Bog” based on the rules above. Note that some attributes are not intended to be labeled. These include:
• Unknown • Other • Not applicable • ACC=1, Accurate • BST=1, Definite • FUN=6, Fully functional • LOC=44, On Ground Surface • RGA=3, Standard (on railway tracks)
If an attribute is unknown or has not been collected, the label is not shown. Examples of these types of attributes are HGT, GAW, LTN, NAM, TXT, and ZVH.
6.3.1
Type Placement
DN: 09-048 17 November 2009
25
The proper selection and placement of type are of extreme importance, not only to the map user, but also because of the impact on the final appearance of the map. See MIL-T-89301A, 1:50,000 Scale Topographic Maps, section 3.19.12 for information on type placement typically used on topographic maps.
6.3.2
Type Font
The TrueType Zurich font has been selected as the most appropriate font to represent the label information for the MGCP 50K product. The following criteria was considered in selecting the font:
• Format should be TrueType
• Must be compatible with the Windows environment
• Must be similar to Swiss742 fonts specified in the MIL-STD-2402 and MIL-STD-2410 (e.g. compatible with the colours, sizes, styles)
• Cost of the purchase of commercial fonts
• All the diacritic marks must be supported
• Extendable (must be possible to add new characters)
The analysis concluded that the standard should not be too rigid regarding the use of one or another font. Nevertheless, for avoiding problems with the diacritical marks, the best choice is to use commercial fonts of recognized brand. These have Unicode codification and, in general, support all the current idiomatic characters.
Secondly, the analysis included not only TrueType but also OpenType because to choose one font in particular would lead to extra cost depending on the national mapping work flow. Therefore, the standard should be as flexible as possible.
OpenType will likely become the standard in the near future, given that OpenType has greater capabilities in complex writings (languages), extendable and advanced typography (kerning, and so on). However, some national mapping work flows are not yet fully compatible with the OpenType fonts. An example of this is what happens with the PDF/X standard. The fonts used in the document must be embedded in it, including the metric and the codification’s data. Under the 1.6 version, the OpenType fonts are not accepted by the PDF format.
The Swiss742 font is one of the “sans serif” style type. The first step was to look for any commercial font available similar to the Swiss742 being, at least, TrueType specification. The digital format of the font was not available so the MIL-STD-2410 in PDF version was utilized for comparison. The main brands like Bitstream/Corel, Monotype and Linotype were taken into account. Even though the criterion of the MIL-STD-2410 was to choose a single font, it was determined that the output for paper maps is better if a set of diverse fonts is used. These are TrueType fonts and they produce a good balance of functionality and aesthetics.
Nevertheless, on the basis of these, a set of compatible or equivalent fonts can be established, and the producers may use them at will. Conversion tables must be as flexible and extendable as possible. Table 1 Font Mapping provides a mapping from the Swiss742 to Zurich and Univers TrueType fonts.
DN: 09-048 17 November 2009
26
Table 1 – Font Mapping
F ont S tyle To Z uric h B T S tyle To Univers S tyle
Univers® 55
Roman
Italic Italic Roman Oblique
B o ld C ond ensed
Swiss 742
Regular (Medium)
Zurich BT
Bold Bold Univers® 65 Bold
C ondensed C ondensed Univers® 57 Condensed
B o ld C ond ensed Univers® 67 Bold Condensed
L igh t C ondensed L igh t C on den sed
Univers® 47
Light Condensed
L igh t C ondens ed Ita lic L igh t C ondens ed Ita lic Light Condensed Italic
DN: 09-048 17 November 2009
A-1
Annex A – MGCP Symbols (normative)
MGCP Symbols
MGCP symbols and portrayal rules are specified in the Annex. This information is sorted alphabetically by Feature Name. A cross reference to Feature Code and specific page locations are provided in the Index.
DN: 09-048 17 November 2009Building (AL015) (continued)
Point
Symbol Information
Apply Label to Symbol: No
Symbol Graphic Name: PT_Black_Marabout Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
Element Type: Point - Shape Element Reference: P00015Element Name: Black_0.2mmMarabout
Description: Black crescent on a stem connected to a "non-filled" circle with a dot in the centre. The "non-filled" circle containing the dot is below the
crescent with a stem. Lineweight is 0.2mm. Dot diameter is 0.25mm. Stem height is 0.6mm.
Colour Token: Black Parameters:
Detail: Black_0.2mmMarabout
Note: See Element: Black_0.2mmMarabout in Annex H for detailed drawing instructions.
MGCP50K PAL015 R000225 Building / synagogue / not destroyed /
non-obstruction (point)
(HWT=20) and (FUN<>3) and (HGT<46)
Symbol Portrayal Rules
A - 37
DN: 09-048 17 November 2009Building (AL015) (continued)
Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_Church Symbol Graphic
Symbol Placement Instructions: Origin: Centre of square
Element Name: Church Element Reference: P00075 Element Type: Point - Complex
Description: A Black filled square with all sides 0.5mm long/wide with a cross staff attached on the top of the filled square and centred along the side
where it is attached
Colour Token: Black Parameters:
Point 1 Name: Black_0.2mmCross
Point 2 Name: Black_0.5mmSquareFilled
Note: Bottom of stem touches the mid-point of the TOP edge of the square feature
Description: Black cross (total height is 1.10 mm and total width is 0.60 mm. The cross piece (horizontal piece) is 0.60 mm long. Lineweight is
0.2mm.
Element Name: Black_0.2mmCross Element Reference: P00013 Element Type: Point - Shape
Colour Token: Black Parameters:
Detail: Black_0.2mmCross
Note: See Element: Black_0.2mmCross in Annex H for detailed drawing instructions.
Element Reference: P00050 Element Type: Point - SimpleElement Name: Black_0.5mmSquareFilled
Description: A Black filled square with all sides 0.5mm long/wide
MGCP50K PAL015 R000228 Building / stupa / not destroyed /
non-obstruction (point)
(HWT=21) and (FUN<>3) and (HGT<46)
Symbol Portrayal Rules
A - 39
DN: 09-048 17 November 2009Building (AL015) (continued)
Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_Minaret Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
MGCP50K AAT050 R000052 Communication Station / all (area)
Symbol Portrayal Rules
A - 61ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
DN: 09-048 17 November 2009Communication Tower (AT080)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_CommunicationTower Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
MGCP50K PAT080 R000462 Communication Tower / multiple
obstructions (point)
*None
Symbol Portrayal Rules
A - 63
*None = Indicates that the symbol to be placed is at the discretion of the implementer. Generally these are situations that would require user
interaction to determine applicability. No attribute conditions are used in the determination.
DN: 09-048 17 November 2009Control Tower (AQ060)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_ControlTower Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
A - 65ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
*None = Indicates that the symbol to be placed is at the discretion of the implementer. Generally these are situations that would require user
interaction to determine applicability. No attribute conditions are used in the determination.
DN: 09-048 17 November 2009Cooling Tower (AF030)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_CoolingTower Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
*None = Indicates that the symbol to be placed is at the discretion of the implementer. Generally these are situations that would require user
interaction to determine applicability. No attribute conditions are used in the determination.
DN: 09-048 17 November 2009Crane (AF040)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_Crane Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
MGCP50K PBI020 R000466 Dam / multiple obstructions (point) *None
Symbol Portrayal Rules
A - 80ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
*None = Indicates that the symbol to be placed is at the discretion of the implementer. Generally these are situations that would require user
interaction to determine applicability. No attribute conditions are used in the determination.
DN: 09-048 17 November 2009Dish Aerial (AT010)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_DishAerial Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
Symbol Graphic Name: LN_Black_Fence Symbol Graphic
Symbol Placement Instructions: X is centred both about its vertical to the dashed line and in spaces between dashed
lines
ü
Description: Black 0.2mm Dash Line (0.2mm wt, 5.0mm dash, 1.3mm gap) with 'X' (0.2mm wt, 1.3mm long)
Element Type: Line - Complex Element Reference: L00062Element Name: Black_Fence
Parameters:
Line Style: Black_0.2mm-5mmLenDash-1.3mmGapLine
Repeating Point: Black_0.2mm-1.3mmLenX
Repeating Point Interval: Centred in the space between dashes
Colour Token: Black
Note: The black X is centred both about its vertical to the dashed line and in spaces between dashed lines
Element Reference: L00033 Element Type: Line - StyledElement Name: Black_0.2mm-5mmLenDash-1.3mmGapLine
Description: Black 0.2mm Dash Line (0.2mm wt, 5.0mm dash, 1.3mm gap)
Dash Spacing: 1.3mmDash Length: 5.0mm
Parameters:
Line weight: 0.2mm
Colour Token: Black
Element Reference: P00046 Element Type: Point - SimpleElement Name: Black_0.2mm-1.3mmLenX
Description: Two Black lines (each 0.2mm lineweight, 1.3mm length) intersect at a 45 degree angle to form an "X". Intersection is at the centre of each
of the 2 line segments.
Colour Token: Black
Line weight: 0.2mm Length: 1.3mm
Parameters:
Orientation: X lines of symbol are 45 degree angles and are centred one to another
MGCP50K PAQ070 R000253 Ferry Crossing / all (point)
Symbol Portrayal Rules
A - 113ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
DN: 09-048 17 November 2009Flare Pipe (AF070)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_FlarePipe Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
MGCP50K AAM030 R000045 Grain Elevator / all (area)
Symbol Portrayal Rules
Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_GrainElevator Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
MGCP50K LBA010 R000383 Land Water Boundary / mangrove, or
marshy (line)
(SLT = 6 or SLT = 8)
Symbol Portrayal Rules
A - 141ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
DN: 09-048 17 November 2009Launch Pad (GB040)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_LaunchPad Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
A - 142ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
DN: 09-048 17 November 2009Lighthouse (BC050)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_Lighthouse Symbol Graphic
Symbol Placement Instructions: The symbology is applied to the geometry of the feature. Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
A - 149ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
DN: 09-048 17 November 2009Memorial Monument (AL130)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_Monument Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
Symbol Graphic Name: PT_Black_MineralPile Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
MGCP50K PAM040 R000472 Mineral Pile / multiple obstructions
(point)
*None
Symbol Portrayal Rules
A - 154
*None = Indicates that the symbol to be placed is at the discretion of the implementer. Generally these are situations that would require user
interaction to determine applicability. No attribute conditions are used in the determination.
DN: 09-048 17 November 2009Mooring Mast (AQ110)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_MooringMast Symbol Graphic
Symbol Placement Instructions: The symbology is applied to the geometry of the feature. Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
MGCP50K PBH170 R000265 Natural Pool / intermittent, dry, or
unknown (point)
(HYP = 0 or HYP = 2 or HYP = 4)
Symbol Portrayal Rules
A - 158ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
DN: 09-048 17 November 2009Non-communication Tower (AL240)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_Non-CommunicationTower Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
A - 160ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
*None = Indicates that the symbol to be placed is at the discretion of the implementer. Generally these are situations that would require user
interaction to determine applicability. No attribute conditions are used in the determination.
DN: 09-048 17 November 2009Offshore Platform (BD110)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_OffshorePlatform Symbol Graphic
Symbol Placement Instructions: The symbology is applied to the geometry of the feature. Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
A - 210ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
DN: 09-048 17 November 2009Rig (AA040)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_Rig Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
A - 238ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
DN: 09-048 17 November 2009Smokestack (AF010)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_Smokestack Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
Symbol Graphic Name: PT_Black_WaterIntakeTower Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
MGCP50K PBI050 R000271 Water Intake Tower / all (point)
Symbol Portrayal Rules
A - 264ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
DN: 09-048 17 November 2009Water Tower (AM080)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_WaterTower Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
MGCP50K PAA050 R000200 Well / not perennial / water (point) (HYP <> 1) and (PPO = 122)
Symbol Portrayal Rules
A - 269
DN: 09-048 17 November 2009Windmill (AJ050)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_Windmill Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
*None = Indicates that the symbol to be placed is at the discretion of the implementer. Generally these are situations that would require user
interaction to determine applicability. No attribute conditions are used in the determination.
DN: 09-048 17 November 2009Windmotor (AJ051)Point
Symbol Information
Apply Label to Symbol: Yes
Symbol Graphic Name: PT_Black_Windmotor Symbol Graphic
Symbol Placement Instructions: Origin: Centre of dot
ü
Element Type: Point - Shape Element Reference: P00010Element Name: Black_CircleOpenWithDot
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm
for the boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Colour Token: Black Parameters:
Detail: Black_CircleOpenWithDot
Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
A - 279ü indicates that the symbol is to be used as the default (or "catch all") symbol for the feature class.
DN: 09-048 17 November 2009
B-1
Annex B - Colour (normative)
Colour
This Annex provides a mapping from a specific colour token to Pantone colour names, the MIL-STD-2402 based SPC Ink colours, CMYK and RGB values. This mapping allows considerable flexibility in specifying equivalent colours in a variety of methodologies. The colour token name provides a link to Annexes A and D.
Colours
Colour Token Description Pantone Ink Number C M Y K R G B SPC #
DN: 09-048 17 November 2009
Black Black Process Black U 0 0 0 100 0 0 0 58600
Black-12 Black12% Process Black U 0 0 0 12 224 224 224 58600
Black-21 Black21% Process Black U 0 0 0 21 201 201 201 58600
Black-31 Black31% Process Black U 0 0 0 31 176 176 176 58600
Black-54 Black54% Process Black U 0 0 0 54 117 117 117 58600
Blue072 Blue Blue 072 U 100 100 0 0 40 22 111 46351
Cyan Cyan Process Cyan U 100 0 0 0 0 159 218 48253
Cyan-31 Cyan31% Process Cyan U 31 0 0 0 176 255 255 48253
Cyan-4 Cyan4% Process Cyan U 4 0 0 0 242 252 252 48253
Dk-Brown1815 Dark Brown 1815 U 0 80 70 40 120 35 39 61121
Dk-Brown1815-42 Dark Brown42% 1815 U 0 15 10 5 234 200 195 61121
Dk-Brown1815-54 Dark Brown54% 1815 U 0 20 15 5 232 189 180 61121
Dk-Brown1815-67 Dark Brown67% 1815 U 0 30 20 10 214 160 155 61121
Rule Reference: R000104 Description: Wood / coniferous / nipa (area)
Additional Labeling Criteria: N/A
Label String: [NAM]
Characteristics: 40
Rule Reference: R000333 Description: Wood / canopy cover >= 25 and < 51 / coniferous / not mangrove and not nipa
(area)
Additional Labeling Criteria: N/A
Label String: [NAM]
Characteristics: 40
C - 91
DN: 09-048 17 November 2009
Zoo ( AK180 )
Rule Reference: R000024 Description: Zoo / all (area)
Additional Labeling Criteria: N/A
Label String: [NAM] "Zoo"
Characteristics: 3,3
C - 92
DN: 09-048 17 November 2009
D-1
Annex D – Text Characteristics (normative)
Text Characteristics
The Text Characteristics associated with the label information provided in Annex C is detailed in this Annex. The Characteristic ID provides the link to Annex C Label Information. The colour token name provides the link to Annex B Colour information.
Text Characteristics
Text
Characteristic # Colour Token Font Style Bold Italics Underline Font Size Case
DN: 09-048 17 November 2009
1 Black Condensed 6 Mixed case
2 Black Regular 6-12 Mixed case
3 Black Condensed 6-16 Mixed case
4 Black Condensed Bold 8-14 Mixed case
5 Black Condensed Italics 6 Mixed case
6 Black Condensed Italics 6-12 Mixed case
7 Black Condensed Italics 6-20 Mixed case
8 Black Condensed Italics 6-16 Mixed case
9 Black Light Condensed Italics 6-16 Mixed case
10 Black Light Condensed Italics 6 Mixed case
11 Black Condensed 7 Mixed case
12 Black Regular 6 Mixed case
13 Black Condensed 5-30 Mixed case
14 Cyan Condensed 6 Mixed case
15 Blue072 Condensed 6 Mixed case
16 Cyan Condensed Italics 6 Mixed case
17 Cyan Regular 6-10 Lower case
18 Black Regular 6-10 Lower case
19 Cyan Condensed Italics 7 Lower case
20 Dk-Brown1815 Condensed Italics 7 Lower case
21 Black Condensed 8 Upper case
22 Black Condensed 6 Lower case
23 Cyan Condensed 6 Lower case
24 Blue072 Condensed 7 Mixed case
25 Black Condensed 6-16 Lower case
26 Blue072 Condensed 6 Lower case
27 Black Light Condensed Italics 6 Upper case
28 Black Light Condensed Italics 6 Lower case
29 Blue072 Condensed 7 Upper case
30 Cyan Regular 6 Mixed case
31 Cyan Condensed Italics 6-12 Upper case
32 Cyan Condensed Italics 6-12 Mixed case
33 Cyan Condensed Italics 6-20 Upper case
34 Cyan Condensed Italics 6-20 Mixed case
35 Black Regular Italics 6 Mixed case
36 Black Condensed Italics 6-20 Upper case
37 Cyan Condensed Italics 6-16 Upper case
38 Cyan Condensed Italics 6-16 Mixed case
39 Black Condensed Italics 6-16 Upper case
D - 2
Text
Characteristic # Colour Token Font Style Bold Italics Underline Font Size Case
DN: 09-048 17 November 2009
40 Black Condensed 6-16 Upper case
41 Black Condensed 6-12 Mixed case
42 Black Condensed 8 Mixed case
45 Black Light Condensed 6 Mixed case
46 Blue072 Condensed Bold 6 Mixed case
47 Black Condensed Bold 14 Upper case
48 Black Condensed Bold 10 Upper case
49 Black Condensed Bold 10 Mixed case
50 Black Condensed 10 Mixed case
51 Dk-Brown1815 Condensed 6 Mixed case
D - 3
DN: 09-048 17 November 2009
E-1
Annex E – Area Elements
Area Elements
Each of the area elements used in Annex A Symbols have been listed only one time in this Annex.
Area Elements
DN: 09-048 17 November 2009
Area - Complex
A00037
Element Name: Woodland-Evergreen Colour Token: Green362-31
Description: Green362-31_ScreenFill (area fill) coincident with Green362_EvergreenTreeFill (area pattern)
Miscellaneous Note: The two area elements are combined as one symbol
Area Pattern 1: Area Pattern 2: Green362_EvergreenTreeFill
Name: Green362-31_ScreenFill
Reference: A00009
Type: Area - Fill Name: Green362_EvergreenTreeFill
Reference: A00012
Type: Area - Pattern
A00038
Element Name: Woodland-Deciduous Colour Token: Green362-31
Description: Green362-31_ScreenFill (area fill) coincident with Green362_DeciduousTreeFill (area pattern)
Miscellaneous Note: The two area elements are combined as one symbol
Area Pattern 1: Area Pattern 2: Green362_DeciduousTreeFill
Name: Green362-31_ScreenFill
Reference: A00009
Type: Area - Fill Name: Green362_DeciduousTreeFill
Reference: A00011
Type: Area - Pattern
A00039
Element Name: Woodland-Mixed Colour Token: Green362-31
Description: Green362-31_ScreenFill (area fill) coincident with Green362_MixedTreeFill (area pattern)
Miscellaneous Note: The two area elements are combined as one symbol
Area Pattern 1: Area Pattern 2: Green362_MixedTreeFill
Name: Green362-31_ScreenFill
Reference: A00009
Type: Area - Fill Name: Green362_MixedTreeFill
Reference: A00013
Type: Area - Pattern
A00040
Element Name: Mangrove Colour Token: Green362
Description: Cyan-31ScreenFill (area fill) coincident with Green362MangroveFill (area pattern)
Miscellaneous Note: The two area fills are combined as one symbol
Area Pattern 1: Area Pattern 2: Green362_MangroveFill
Name: Cyan-31_ScreenFill
Reference: A00007
Type: Area - Fill Name: Green362_MangroveFill
Reference: A00025
Type: Area - Pattern
E - 2
DN: 09-048 17 November 2009
A00041
Element Name: NipaPalm Colour Token: Green362
Description: Cyan-31ScreenFill (area fill) coincident with Green362NipaPalmFill (area pattern)
Miscellaneous Note: The two area fills are combined as one symbol
Area Pattern 1: Area Pattern 2: Green362_NipaPalmFill
Name: Cyan-31_ScreenFill
Reference: A00007
Type: Area - Fill Name: Green362_NipaPalmFill
Reference: A00024
Type: Area - Pattern
A00049
Element Name: CoversUncovers-Fill Colour Token: Black-12
Description: Cyan-31ScreenFill (Area Fill) coincident with Black-12ScreenFill-15degree (Area Fill)
Miscellaneous Note: The two area fills are combined as one symbol
Area Pattern 1: Area Pattern 2: Black-12_ScreenFill-15degree
Name: Cyan-31_ScreenFill
Reference: A00007
Type: Area - Fill Name: Black-12_ScreenFill-15degree
Reference: A00048
Type: Area - Fill
A00051
Element Name: Groin-CoversUncovers Colour Token: Black-12
Description: Cyan-31ScreenFill (area fill) coincident with Black-12ScreenFill-15degree (area fill)
Miscellaneous Note: The two area fills are combined as one symbol
Area Pattern 1: Area Pattern 2: Black-12_ScreenFill-15degree
Name: Cyan-31_ScreenFill
Reference: A00007
Type: Area - Fill Name: Black-12_ScreenFill-15degree
Reference: A00048
Type: Area - Fill
E - 3
DN: 09-048 17 November 2009
Area - Fill
A00002
Element Name: Blue072_SolidFill Colour Token: Blue072
Description: Cyan Diagonal Line Fill - 35% coverage, 40L, 45 degree angle lines.
Miscellaneous Note: Line Pattern #15
Area Pattern Information: See Element: Cyan_LP15Fill in Annex I
A00022
Element Name: Dk-Brown1815_MoraineFill Colour Token: Dk-Brown1815
Description: Dk-Brown1815 Moraine Fill
Miscellaneous Note: Area Pattern #99
Area Pattern Information: See Element: Dk-Brown1815_MoraineFill in Annex I
A00024
Element Name: Green362_NipaPalmFill Colour Token: Green362
Description: Green362 Nipa Palm Fill area pattern
Miscellaneous Note: Area Pattern #7
Area Pattern Information: See Element: Green362_NipaPalmFill in Annex I
A00025
Element Name: Green362_MangroveFill Colour Token: Green362
Description: Green362 Mangrove Fill area pattern
Miscellaneous Note: Area Pattern #8
Area Pattern Information: See Element: Green362_MangroveFill in Annex I
A00026
Element Name: Green362_GrasslandFill Colour Token: Green362
Description: Green362 Grassland Fill
Miscellaneous Note: Area Pattern #66
Area Pattern Information: See Element: Green362_GrasslandFill in Annex I
A00027
Element Name: Green362_ScrubThicketFill Colour Token: Green362
Description: Green362 Scrub/Thicket Fill
Miscellaneous Note: Area Pattern #68
Area Pattern Information: See Element: Green362_ScrubThicketFill in Annex I
E - 8
DN: 09-048 17 November 2009
A00028
Element Name: Green362_OrchardPlantationFill Colour Token: Green362
Description: Green362 Orchard/Plantation Fill
Miscellaneous Note: Area Pattern #74
Area Pattern Information: See Element: Green362_OrchardPlantationFill in Annex I
A00029
Element Name: Green362_VineyardHopFill Colour Token: Green362
Description: Green362 Vineyard/Hops Fill
Miscellaneous Note: Area Pattern #77
Area Pattern Information: See Element: Green362_VineyardHopFill in Annex I
A00030
Element Name: Dk-Brown1815_DistortedSurfaceFill Colour Token: Dk-Brown1815
Description: Dk-Brown1815 Distorted Surface Fill
Miscellaneous Note: Area Pattern #103
Area Pattern Information: See Element: Dk-Brown1815_DistortedSurfaceFill in Annex I
A00031
Element Name: Dk-Brown1815_CrescentDunesFill Colour Token: Dk-Brown1815
Description: Dk-Brown1815 Crescent Sand Dunes Fill
Miscellaneous Note: Area Pattern #108
Area Pattern Information: See Element: Dk-Brown1815_CrescentDunesFill in Annex I
A00032
Element Name: Dk-Brown1815_RippleDunesFill Colour Token: Dk-Brown1815
Description: Dk-Brown1815 Ripple Sand Dunes Fill
Miscellaneous Note: Area Pattern #112
Area Pattern Information: See Element: Dk-Brown1815_RippleDunesFill in Annex I
A00033
Element Name: Dk-Brown1815_StarDunesFill Colour Token: Dk-Brown1815
Description: Dk-Brown1815 Star Sand Dunes Fill
Miscellaneous Note: Area Pattern #120
Area Pattern Information: See Element: Dk-Brown1815_StarDunesFill in Annex I
E - 9
DN: 09-048 17 November 2009
A00034
Element Name: Dk-Brown1815_TransverseDunesFill Colour Token: Dk-Brown1815
Description: Dk-Brown1815 Transverse Sand Dunes Fill
Miscellaneous Note: Area Pattern #127
Area Pattern Information: See Element: Dk-Brown1815_TransverseDunesFill in Annex I
A00035
Element Name: Dk-Brown1815_SandFill Colour Token: Dk-Brown1815
Description: Dk-Brown1815 Sand Fill
Miscellaneous Note: Area Pattern #95
Area Pattern Information: See Element: Dk-Brown1815_SandFill in Annex I
A00036
Element Name: Dk-Brown1815_SandandGravelFill Colour Token: Dk-Brown1815
Description: Dk-Brown1815 Sand and Gravel Fill
Miscellaneous Note: Area Pattern #99
Area Pattern Information: See Element: Dk-Brown1815_SandandGravelFill in Annex I
A00042
Element Name: Dk-Brown1815_DomeDunesFill Colour Token: Dk-Brown1815
Description: Dk-Brown1815 Dome Sand Dunes Fill
Miscellaneous Note: Area Pattern #126
Area Pattern Information: See Element: Dk-Brown1815_DomeDunesFill in Annex I
A00043
Element Name: Dk-Brown1815_LinearDunesFill Colour Token: Dk-Brown1815
Description: DK-Brown1815 Linear Sand Dunes Fill
Miscellaneous Note: Area Pattern #118
Area Pattern Information: See Element: Dk-Brown1815_LinearDunesFill in Annex I
A00044
Element Name: Cyan_SaltEvaporatorFill Colour Token: Cyan
Description: A grid pattern comprised of 1.5mm x 1.5mm squares. Grid alignment is parallel to longest axis of the perimeter line and centred.
Miscellaneous Note: Lineweight: 0.2mm; Length: 1.5mm; Grid squares: 1.5mm x 1.5mm; Grid alignment parallel to longest axis of perimeter line and centred
E - 10
DN: 09-048 17 November 2009
A00045
Element Name: Black_DamAreaInteriorFill Colour Token: Black
Description: A linear pattern used to fill an area geometry.
Miscellaneous Note: Interior lines oriented 90 degrees between upstream and downstream lines when dam is straight. When dam is curved, spacing is 0.5mm at
the narrowest (downhill side) and fanned out equally towards the uphill side of the dam not to exceed 0.7mm.
Area Pattern Information: Lineweight: 0.1mm; Interior line spacing: 0.5mm at the narrowest point.
A00047
Element Name: Woodland-ScatteredTrees Colour Token: Green362
Description: Green362 Woodland Scattered Trees Fill
Miscellaneous Note: Area Pattern #44
Area Pattern Information: See Element: Woodland-ScatteredTrees in Annex I
A00050
Element Name: Green362_CaneFill Colour Token: Green362
Description: Green362 Cane Fill
Miscellaneous Note: Area Pattern #86
Area Pattern Information: See Element: Green362_CaneFill in Annex I
A00053
Element Name: Black_GreenhouseFill Colour Token: Black
Description: Black Greenhouse Fill
Miscellaneous Note: The longest dimension of the diamond pattern should be oriented to the same direction as the longest side of the glasshouse.
Area Pattern Information: A black diamond cross hatching, with 0.4mm between centrelines of the hatch, hatch line wt 0.15mm with a cross angle of 145/35.
A00056
Element Name: Dk-Brown1815_DamAreaInteriorFill Colour Token: Dk-Brown1815
Description: A linear pattern used to fill an area geometry.
Miscellaneous Note: Interior lines oriented 90 degrees between upstream and downstream lines when dam is straight. When dam is curved, spacing is 0.5mm at
the narrowest (downhill side) and fanned out equally towards the uphill side of the dam not to exceed 0.7mm.
Area Pattern Information: Lineweight: 0.1mm; Interior line spacing: 0.5mm at the narrowest point.
E - 11
DN: 09-048 17 November 2009
F-1
Annex F – Line Elements
Line Elements
Each of the linear elements used in Annex A Symbols have been listed only one time in this Annex.
Line Elements
DN: 09-048 17 November 2009
Line - Complex
L00055
Element Name: Black_Bridge Colour Token: Black
Description: Black 0.3mm Solid Line casing varying based upon separation; Wing Ticks (0.15mm wt, 0.75mm long)
Miscellaneous Note: Tick angle depends on which end of the feature they are placed
Line Style: Element Name: Black_0.3mmSolidCasedLine Element Reference: L00019 Element Type: Line - Simple
Fix Point at Start of Line:
Element Name: Black_0.15mm-0.75mmLenWingTick Element Type: Point - SimpleElement Reference: P00042
Fix Point at End of Line:
Element Name: Black_0.15mm-0.75mmLenWingTick Element Type: Point - SimpleElement Reference: P00042
L00057
Element Name: Black_Bridge (Draw/Lift) Colour Token: Black
Description: Black 0.3mm Solid Line casing varying based upon separation; Open Circle and Wing Ticks (0.15mm wt, 0.75mm long)
Miscellaneous Note: Tick angle depends on which end of the feature they are placed
Line Style: Element Name: Black_0.3mmSolidCasedLine Element Reference: L00019 Element Type: Line - Simple
Fix Point at Start of Line:
Element Name: Black_0.15mm-0.75mmLenWingTick Element Type: Point - SimpleElement Reference: P00042
Fix Point at Centre of Line:
Element Name: Black_0.3mmCircleOpen Element Type: Point - SimpleElement Reference: P00048
Fix Point at End of Line:
Element Name: Black_0.15mm-0.75mmLenWingTick Element Type: Point - SimpleElement Reference: P00042
F - 2
DN: 09-048 17 November 2009
L00058
Element Name: Black_Bridge (Pedestrian) Colour Token: Black
Description: Black 0.3mm Solid Line with V (0.15mm wt, 0.75mm long)
Miscellaneous Note: Origin: Apex of 'V' touches bridge ends with ticks facing away
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Fix Point at Start of Line:
Element Name: Black_0.15mm-0.75mmLenV Element Type: Point - SimpleElement Reference: P00039
Fix Point at End of Line:
Element Name: Black_0.15mm-0.75mmLenV Element Type: Point - SimpleElement Reference: P00039
L00059
Element Name: Dk-Brown1815_Embankment (WithoutTransport) Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.2mm Solid Line with Ticks (0.15mm wt, 0.8mm long, 1.5mm interval)
Miscellaneous Note: Tick is centred and 90 degrees to line. Tick Interval is 1.500mm
Line Style: Element Name: Dk-Brown1815_0.20mmSolidLine Element Reference: L00023 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.15mm-0.8mmLenTick Element Reference: P00067 Element Type: Point - Simple
Repeating Point Interval: 1.5mm
L00060
Element Name: Green362_Hedgerow Colour Token: Green362
Description: Green362_0.1mmOpenCircle circles repeating along the linear feature.
Miscellaneous Note: The repeating point interval is such that the consecutive circles touch edges (centres of consecutive circles are 0.500mm apart)
Line Style: Element Name: 0mmLine Element Reference: L00145 Element Type: Line - Simple
Repeating Point: Element Name: Green362_0.1mmOpenCircle Element Reference: P00111 Element Type: Point - Simple
Repeating Point Interval: 0.5mm
F - 3
DN: 09-048 17 November 2009
L00061
Element Name: Dk-Brown1815_Levee Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.25mm Solid Line casing varying based upon separation; Ticks (0.25mm wt, 0.5mm long, 1.5mm interval)
Miscellaneous Note: Tick end is on and at 90 degrees to line, facing downhill. Tick Interval: 1.5mm
Line Style: Element Name: Dk-Brown1815_0.25mmSolidCasedLine Element Reference: L00020 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.25mm-0.5mmLenTick Element Reference: P00070 Element Type: Point - Simple
Repeating Point Interval: 1.5mm
L00062
Element Name: Black_Fence Colour Token: Black
Description: Black 0.2mm Dash Line (0.2mm wt, 5.0mm dash, 1.3mm gap) with 'X' (0.2mm wt, 1.3mm long)
Miscellaneous Note: The black X is centred both about its vertical to the dashed line and in spaces between dashed lines
Line Style: Element Name:
Black_0.2mm-5mmLenDash-1.3mmGapLine
Element Reference: L00033 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.2mm-1.3mmLenX Element Reference: P00046 Element Type: Point - Simple
Repeating Point Interval: Centred in the space between dashes
L00063
Element Name: Cyan_IceCliff Colour Token: Cyan
Description: Cyan 0.2mm Dash Line (0.2mm wt, 5.0mm dash, 0.5mm gap) with Tick (0.1mm w,t 0.5mm long, 0.5mm interval)
Miscellaneous Note: Tick end is on and at 90 degrees to dashed line, facing downhill
Line Style: Element Name:
Cyan_0.2mm-5mmLenDash-0.5mmGapLine
Element Reference: L00042 Element Type: Line - Styled
Repeating Point: Element Name: Cyan_0.1mm-0.5mmLenTick Element Reference: P00055 Element Type: Point - Simple
Repeating Point Interval: 0.5mm
F - 4
DN: 09-048 17 November 2009
L00064
Element Name: Dk-Brown1815_Cliff (High) Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.2mm Solid Line with Ticks (0.1mm wt, 0.5mm long, 0.5mm interval)
Miscellaneous Note: Tick end is on and at 90 degrees to line, facing downhill
Line Style: Element Name: Dk-Brown1815_0.20mmSolidLine Element Reference: L00023 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.1mm-0.5mmLenTick Element Reference: P00065 Element Type: Point - Simple
Repeating Point Interval: 0.5mm
L00066
Element Name: Dk-Brown1815_Slope (High) Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.25mm Solid Line with Ticks (0.25mm wt, 0.5mm long, 1.5mm interval)
Miscellaneous Note: Tick end is on and at 90 degrees to line, facing downhill. Tick Interval: 1.5mm
Line Style: Element Name: Dk-Brown1815_0.25mmSolidLine Element Reference: L00024 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.25mm-0.5mmLenTick Element Reference: P00070 Element Type: Point - Simple
Repeating Point Interval: 1.5mm
L00067
Element Name: Dk-Brown1815_Slope (Low) Colour Token: Dk-Brown1815
Description: 0mm Line with Dk-Brown1815_0.25mm-3mm_TickLine (Line segment: 0.25 mm wt, 3.0mm len Ticks: 0.25mm wt, 0.5mm len, placed at 1.0mm
and 2.0mm along line segment) repeating along the line.
Miscellaneous Note: Ticks point downhill.
Line Style: Element Name: 0mmLine Element Reference: L00145 Element Type: Line - Simple
Repeating Point: Element Name: Element Reference: Element Type:
Repeating Point Interval: 3.5mm between left end of line segments or 0.5mm gap between consecutive segments
F - 5
DN: 09-048 17 November 2009
L00068
Element Name: Black_Pipeline (Other) Colour Token: Black
Description: Black 0.3mm Solid Line with 'V' (0.2mm wt, 0.7mm long)
Miscellaneous Note: Origin: Apex of 'V' touches pipeline ends with "legs" of "V" facing away
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Fix Point at Start of Line:
Element Name: Black_0.2mm-0.7mmLenV Element Type: Point - SimpleElement Reference: P00045
Fix Point at End of Line:
Element Name: Black_0.2mm-0.7mmLenV Element Type: Point - SimpleElement Reference: P00045
L00069
Element Name: Cyan_Pipeline (Water) Colour Token: Cyan
Description: Cyan 0.3mm Solid Line with 'V' (0.2mm wt, 0.7mm long)
Miscellaneous Note: Origin: Apex of 'V' touches pipeline ends with "legs" of "V" facing away
Line Style: Element Name: Cyan_0.3mmSolidLine Element Reference: L00016 Element Type: Line - Simple
Fix Point at Start of Line:
Element Name: Cyan_0.2mm-0.7mmLenV Element Type: Point - SimpleElement Reference: P00058
Fix Point at End of Line:
Element Name: Cyan_0.2mm-0.7mmLenV Element Type: Point - SimpleElement Reference: P00058
L00070
Element Name: Blue072_Powerline (Normal) Colour Token: Blue072
Description: Blue072 0.4mm Solid Line with Pylons
Miscellaneous Note: The repeating point is also positioned at points of directional change. The symbol should remain up most. Interval is 12.5mm
Line Style: Element Name: Blue072_0.4mmSolidLine Element Reference: L00005 Element Type: Line - Simple
Repeating Point: Element Name: Blue072_Pylon Element Reference: P00020 Element Type: Point - Shape
Repeating Point Interval: 12.5mm
F - 6
DN: 09-048 17 November 2009
L00071
Element Name: Blue072_Powerline (Catenary) Colour Token: Blue072
Description: Blue072 0.73mm Solid Line with Pylons
Miscellaneous Note: The repeating point is also positioned at points of directional change. The symbol should remain up most. Interval is 12.5mm
Line Style: Element Name: Blue072_0.73mmSolidLine Element Reference: L00006 Element Type: Line - Simple
Repeating Point: Element Name: Blue072_Pylon Element Reference: P00020 Element Type: Point - Shape
Repeating Point Interval: 12.5mm
L00072
Element Name: Black_Railway (Double Normal Gauge, Non-Electric) Colour Token: Black
Description: Black 0.3mm Solid Line with Double Ticks (0.15mm wt, 1.5mm long, 6.4mm interval )
Miscellaneous Note: Ticks are centred and 90 degrees to line.
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.2mm after that 6.9mm
2nd Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Type: Point - SimpleElement Reference: P00044
Repeating Point Interval: Initial offset: 3.7mm after that 6.9mm
L00073
Element Name: Black_Railway (Double Narrow Gauge, Non-Electric) Colour Token: Black
Description: Black 0.3mm Solid Line with Double Ticks (0.15mm wt, 0.75mm long, 6.4mm interval )
Miscellaneous Note: Ticks are 90 degrees to line and tick pairs alternate on either side of the line.
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Reference: P00038 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.2mm after that 6.9mm
2nd Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Type: Point - SimpleElement Reference: P00038
Repeating Point Interval: Initial offset: 3.7mm after that 6.9mm
F - 7
DN: 09-048 17 November 2009
L00074
Element Name: Black_Railway (Double Normal Gauge, Electric) Colour Token: Black
Description: Black 0.3mm Solid Line with Double Ticks (0.15mm wt, 1.5mm long, 6.4mm interval ) and 0.5mm Dots
Miscellaneous Note: Ticks are centred and 90 degrees to line. Bottom of each dot is offset 0.75mm from the centre of the line style line.
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.2mm after that 6.9mm
2nd Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Type: Point - SimpleElement Reference: P00044
Repeating Point Interval: Initial offset 3.7mm after that 6.9mm
3rd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 3.05mm after that 13.8mm. Dots are placed on every other pair of ticks on the north/west most
side of the track.
4th Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.85mm after that 13.8mm. Dots are placed on every other pair of ticks on the north/west most
side of the track.
Element Reference: P00049
F - 8
DN: 09-048 17 November 2009
L00075
Element Name: Black_Railway (Single Narrow Gauge, Electric) Colour Token: Black
Description: Black 0.3mm Solid Line with Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots
Miscellaneous Note: Ticks are 90 degrees to line and alternate on either side of the line. Bottom of each dot is offset 0.75mm from the centre of the line style
line
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Reference: P00038 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm
2nd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 2.95mm after that 12.8mm. Dots are placed on every tick on the north/west most side of the
track since ticks alternate sides
3rd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 3.45mm after that 12.8mm. Dots are placed on every tick on the north/west most side of the
track since ticks alternate sides.
F - 9
DN: 09-048 17 November 2009
L00076
Element Name: Black_Railway (Double Narrow Gauge, Electric) Colour Token: Black
Description: Black 0.3mm Solid Line with Double Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots
Miscellaneous Note: Ticks are 90 degrees to line and alternate on either side of the line. Bottom of each dot is offset 0.75mm from the centre of the line style
line
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Reference: P00038 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.2mm after that 6.9mm
2nd Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Type: Point - SimpleElement Reference: P00038
Repeating Point Interval: Initial offset 3.7mm after that 6.9mm
3rd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 3.05mm after that 13.8mm. Dots are placed on every pair of ticks on the north/west most side
of the track since ticks alternate sides.
4th Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.85mm after that 13.8mm. Dots are placed on every pair of ticks on the north/west most side
of the track since ticks alternate sides.
Element Reference: P00049
L00077
Element Name: Black_Railway (Double Normal Gauge, Non-Electric, not in use) Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Double Ticks (0.15mm wt, 1.5mm long, 6.4mm interval )
Miscellaneous Note: Tick pair is centred in dash and 90 degrees to line. There is a 0.5mm gap between each tick in the tick pair.
Line Style: Element Name:
Black_0.3mm-5.9mmLenDash-0.5mmGapLine
Element Reference: L00039 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 2.7mm after that 6.4mm
2nd Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Type: Point - SimpleElement Reference: P00044
Repeating Point Interval: Initial offset 3.2mm after that 6.4mm
F - 10
DN: 09-048 17 November 2009
L00078
Element Name: Black_Railway (Single Normal Gauge, Non-Electric, not in use) Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Ticks (0.15mm wt, 1.5mm long, 6.4mm interval )
Miscellaneous Note: Tick is centred in dash and 90 degrees to line.
Line Style: Element Name:
Black_0.3mm-5.9mmLenDash-0.5mmGapLine
Element Reference: L00039 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 2.95mm after that 6.4mm
L00079
Element Name: Black_Railway (Single Narrow Gauge, Non-Electric, not in use) Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Ticks (0.15mm wt, 0.75mm long, 6.4mm interval )
Miscellaneous Note: Ticks are based 90 degrees to line and alternate on either side of the line. Tick is centred along dash.
Line Style: Element Name:
Black_0.3mm-5.9mmLenDash-0.5mmGapLine
Element Reference: L00039 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Reference: P00038 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 2.95mm after that 6.4mm
L00080
Element Name: Black_Railway (Double Narrow Gauge, Non-Electric, not in use) Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Double Ticks (0.15mm wt, 0.75mm long, 6.4mm interval )
Miscellaneous Note: Tick pair is centred in dash and 90 degrees to line. Tick pairs alternate on either side of the line.
Line Style: Element Name:
Black_0.3mm-5.9mmLenDash-0.5mmGapLine
Element Reference: L00039 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Reference: P00038 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 2.7mm after that 6.4mm
2nd Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Type: Point - SimpleElement Reference: P00038
Repeating Point Interval: Initial offset 3.2mm after that 6.4mm
F - 11
DN: 09-048 17 November 2009
L00081
Element Name: Black_Car-Line Colour Token: Black
Description: Black 0.15mm Solid Line with Ticks (0.15mm wt, 1.5mm long, 3.8mm interval )
Miscellaneous Note: Ticks are centred and 90 degrees to line. Tick length extends across road.
Line Style: Element Name: Black_0.15mmSolidLine Element Reference: L00008 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 1.9mm after that 3.8mm
L00083
Element Name: Black_Railway (Single Narrow Gauge, Electric, not in use) Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots
Miscellaneous Note: Ticks are 90 degrees to line and alternate on either side of the line. Bottom of each dot is 0.75mm from the centre of the line style line
Line Style: Element Name:
Black_0.3mm-5.9mmLenDash-0.5mmGapLine
Element Reference: L00039 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Reference: P00038 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 2.95mm after that 6.4mm
2nd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 2.7mm after that 12.8mm. Dots are placed on every other tick on the north/west most side of
the track
3rd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 3.2mm after that 12.8mm. Dots are placed on every other tick on the north/west most side of
the track
F - 12
DN: 09-048 17 November 2009
L00084
Element Name: Black_Railway (Double Narrow Gauge, Electric, not in use) Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Double Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots
Miscellaneous Note: Ticks are 90 degrees to line and alternate on either side of the line. Bottom of each dot is offset 0.75mm from the centre of the line style
line
Line Style: Element Name:
Black_0.3mm-5.9mmLenDash-0.5mmGapLine
Element Reference: L00039 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Reference: P00038 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 2.7mm after that 6.4mm
2nd Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Type: Point - SimpleElement Reference: P00038
Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm
3rd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 2.55mm after that 12.8mm. Dots are placed on every pair of ticks on the north/west most side
of the track since ticks alternate sides
4th Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.35mm after that 12.8mm. Dots are placed on every pair of ticks on the north/west most side
of the track since ticks alternate sides
Element Reference: P00049
F - 13
DN: 09-048 17 November 2009
L00085
Element Name: Black_Railway (Single Normal Gauge, Electric, not in use) Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots
Miscellaneous Note: Tick is centred in dash and 90 degrees to line. Bottom of each dot is offset 0.75mm from the centre of the line style line
Line Style: Element Name:
Black_0.3mm-5.9mmLenDash-0.5mmGapLine
Element Reference: L00039 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 2.95mm after that 6.4mm
2nd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 2.7mm after that 6.4mm. Dots are placed on every other tick on the north/west most side of the
track
3rd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm. Dots are placed on every other tick on the north/west most side of the
track
F - 14
DN: 09-048 17 November 2009
L00086
Element Name: Black_Railway (Double Normal Gauge, Electric, not in use) Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 5.9mm dash, 0.5mm gap) with Double Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots
Miscellaneous Note: Tick pair is centred in dash and 90 degrees to line. Bottom of each dot is offset 0.75mm from the centre of the line style line
Line Style: Element Name:
Black_0.3mm-5.9mmLenDash-0.5mmGapLine
Element Reference: L00039 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 2.7mm after that 6.4mm
2nd Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Type: Point - SimpleElement Reference: P00044
Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm
3rd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 2.55mm after that 12.8mm. Dots are placed on every other tick on the north/west most side of
the track
4th Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.35mm after that 12.8mm. Dots are placed on every other tick on the north/west most side of
the track
Element Reference: P00049
L00087
Element Name: Black_Railway (Single Narrow Gauge, Non-Electric) Colour Token: Black
Description: Black 0.3mm Solid Line with Ticks (0.15mm wt, 0.75mm long, 6.4mm interval )
Miscellaneous Note: Ticks are 90 degrees to line and alternate on either side of the line.
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Reference: P00038 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm
F - 15
DN: 09-048 17 November 2009
L00088
Element Name: Black_Railway (Single Normal Gauge, Electric) Colour Token: Black
Description: Black 0.3mm Solid Line with Ticks (0.15mm wt, 1.5mm long, 6.4mm interval )
Miscellaneous Note: Ticks are centred 90 and degrees to line. Bottom of each dot is offset 0.75mm from the centre of the line style line
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm
2nd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 2.95mm after that 12.8mm. Dots are placed on every other pair of ticks on the north/west most
side of the track.
3rd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Initial offset: 3.45mm after that 12.8mm. Dots are placed on every other pair of ticks on the north/west most
side of the track.
L00090
Element Name: Black_RailwaySpur (Single Narrow Gauge, Electric) Colour Token: Black
Description: Black 0.15mm Solid Line with Ticks (0.15mm wt, 0.75mm long, 6.4mm interval ) and 0.5mm Dots
Miscellaneous Note: Tick is based 90 degrees to line and set alternate on either side of the line. Bottom of Dot is 0.75mm from the centre of the line
Line Style: Element Name: Black_0.15mmSolidLine Element Reference: L00008 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Reference: P00038 Element Type: Point - Simple
Repeating Point Interval: 6.4mm
2nd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Space between one set of 2 dots is 0.5mm; Dots centred on every other pair of ticks on the north/west most
side of the track
F - 16
DN: 09-048 17 November 2009
L00091
Element Name: Black_RailwaySpur (Single Narrow Gauge, Non-Electric) Colour Token: Black
Description: Black 0.15mm Solid Line with Ticks (0.15mm wt, 0.75mm long, 6.4mm interval )
Miscellaneous Note: Tick is based 90 degrees to line and set alternate on either side of the line.
Line Style: Element Name: Black_0.15mmSolidLine Element Reference: L00008 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-0.75mmLenTick Element Reference: P00038 Element Type: Point - Simple
Repeating Point Interval: 6.4mm
L00092
Element Name: Black_RailwaySpur (Single Normal Gauge, Electric) Colour Token: Black
Description: Black 0.15mm Solid Line with Ticks (0.15mm wt, 1.5mm long, 6.4mm interval ) and 0.5mm Dots
Miscellaneous Note: Tick is centred and 90 degrees to line. Bottom of Dot is 0.75mm from the centre of the line
Line Style: Element Name: Black_0.15mmSolidLine Element Reference: L00008 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: 6.4mm
2nd Repeating Point: Element Name: Black_0.5mmDotFilled Element Type: Point - SimpleElement Reference: P00049
Repeating Point Interval: Space between one set of 2 dots is 0.5mm; Dots are centred on every other pair of ticks on the north/west
most side of the track
L00093
Element Name: Black_Railway (Single Normal Gauge, Non-Electric) Colour Token: Black
Description: Black 0.3mm Solid Line with Ticks (0.15mm wt, 1.5mm long, 6.4mm interval )
Miscellaneous Note: Ticks are centred and 90 degrees to line
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm
F - 17
DN: 09-048 17 November 2009
L00094
Element Name: Cyan_TunnelAqueduct Colour Token: Cyan
Description: Cyan 0.2mm Cased Dash Line (0.2mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Water Entrance/Exit
Miscellaneous Note: Wing Ticks always point away from the tunnel line; 1 Tunnel Water Entrance/Exit placed centred at opposite ends of the tunnel at 90
degrees to the line
Line Style: Element Name:
Cased_Cyan_0.2mmDashed-0.5mmGapLine
Element Reference: L00047 Element Type: Line - Styled
Fix Point at Start of Line:
Element Name: Cyan0.2mmTick-Entrance/Exit Element Type: Point - SimpleElement Reference: P00074
Fix Point at End of Line:
Element Name: Cyan0.2mmTick-Entrance/Exit Element Type: Point - SimpleElement Reference: P00074
L00095
Element Name: Cyan_TunnelCanal Colour Token: Cyan
Description: Cyan 0.2mm Dash Line (0.2mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Water Entrance/Exit
Miscellaneous Note: Wing Ticks always point away from the tunnel line; 1 Tunnel Water Entrance/Exit placed centred at opposite ends of the tunnel at 90
degrees to the line
Line Style: Element Name:
Cyan_0.2mm-2mmLenDash-0.5mmGapLine
Element Reference: L00041 Element Type: Line - Styled
Fix Point at Start of Line:
Element Name: Cyan0.2mmTick-Entrance/Exit Element Type: Point - SimpleElement Reference: P00074
Fix Point at End of Line:
Element Name: Cyan0.2mmTick-Entrance/Exit Element Type: Point - SimpleElement Reference: P00074
F - 18
DN: 09-048 17 November 2009
L00096
Element Name: Black_TunnelRail Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Rail
Miscellaneous Note: Wing Ticks always point away from the tunnel line. 1 Tunnel Rail Entrance/Exit placed centred at opposite ends of the tunnel at 90
degrees to the line
Line Style: Element Name:
Black_0.3mm-2mmLenDash-0.5mmGapLine
Element Reference: L00036 Element Type: Line - Styled
Fix Point at Start of Line:
Element Name: Black_0.1mmTick-Entrance/Exit Element Type: Point - SimpleElement Reference: P00072
Fix Point at End of Line:
Element Name: Black_0.1mmTick-Entrance/Exit Element Type: Point - SimpleElement Reference: P00072
L00097
Element Name: Black_TunnelRoad Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 2.0mm dash, 0.5mm gap) with Tunnel Road
Miscellaneous Note: Wing Ticks always point away from the tunnel line. 1 Tunnel Road Entrance/Exit placed centred at opposite ends of the tunnel at 90
degrees to the line
Line Style: Element Name:
Cased_Black_0.3mmDashed-0.5mmGapLine
Element Reference: L00046 Element Type: Line - Styled
Fix Point at Start of Line:
Element Name: Black_0.2mmTick-Entrance/Exit Element Type: Point - SimpleElement Reference: P00073
Fix Point at End of Line:
Element Name: Black_0.2mmTick-Entrance/Exit Element Type: Point - SimpleElement Reference: P00073
F - 19
DN: 09-048 17 November 2009
L00100
Element Name: Dk-Brown1815_Columnar-Rock-Outline Colour Token: Dk-Brown1815
Description: Dk-Brown1815 02 Solid Line with a Red-Brown 02-01 Tick (0.2mm wt, 0.1mm long, 0.8mm interval)
Miscellaneous Note: Tick end is on and at 90 degrees to line, facing downhill
Line Style: Element Name: Dk-Brown1815_0.20mmSolidLine Element Reference: L00023 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.2mm-1.0mmLenTick Element Reference: P00069 Element Type: Point - Simple
Repeating Point Interval: 0.8mm
L00101
Element Name: Dk-Brown1815_Embankment-Outline Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.25mm Solid Line with Ticks (0.25mm wt, 0.5mm long, 1.5mm interval)
Miscellaneous Note: Tick end is on and at 90 degrees to line, facing downhill
Line Style: Element Name: Dk-Brown1815_0.25mmSolidLine Element Reference: L00024 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.25mm-0.5mmLenTick Element Reference: P00070 Element Type: Point - Simple
Repeating Point Interval: 1.5mm
L00102
Element Name: Black_Lock-Outline Colour Token: Black
Description: Black 04 Solid Lines along edges with Black 025 Solid Lines at 45 degree pointing upstream
Miscellaneous Note: Lock ends positioned with apex at 45 degrees pointing upstream
Line Style: Element Name: Black_0.4mmSolidLine Element Reference: L00013 Element Type: Line - Simple
2nd Line Style: Element Name: Black_0.25mmSolidLine Element Reference: L00010 Element Type: Line - Simple
F - 20
DN: 09-048 17 November 2009
L00103
Element Name: Black_Railway-Yard Colour Token: Black
Description: Black 02 Solid Line with Black 015-1 Ticks (0.15mm wt, 1.0mm long, 6.4mm interval) as a perimeter, with the same symbol running through the
area spaced 0.4mm
Miscellaneous Note: Tick is centred and 90 degrees to line
Line Style: Element Name: Black_0.2mmSolidLine Element Reference: L00009 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-1mmLenTick Element Reference: P00043 Element Type: Point - Simple
Repeating Point Interval: 6.4mm
L00104
Element Name: Black_Park-Outline Colour Token: Black
Description: Black 02-65-25 Dash Line (0.2mm wt, 6.5mm dash, 2.5mm gap) with a Black Dot (0.25mm diameter) between dashes
Line Style: Element Name:
Black_0.2mm-6.5mmLenDash-2.5mmGapLine
Element Reference: L00034 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.25mmDotFilled Element Reference: P00047 Element Type: Point - Simple
Repeating Point Interval: Centre dot in space between dashes
L00106
Element Name: Cyan_Aqueduct / Penstock Colour Token: Cyan
Description: Cyan 0.3mm Solid Line with 'V' (0.3mm wt, 0.7mm long)
Miscellaneous Note: Origin: Apex of 'V' touches line ends with ticks facing away
Line Style: Element Name: Cyan_0.3mmSolidLine Element Reference: L00016 Element Type: Line - Simple
Fix Point at Start of Line:
Element Name: Cyan_0.3mm-0.7mmLenV Element Type: Point - SimpleElement Reference: P00062
Fix Point at End of Line:
Element Name: Cyan_0.3mm-0.7mmLenV Element Type: Point - SimpleElement Reference: P00062
F - 21
DN: 09-048 17 November 2009
L00111
Element Name: Dk-Brown1815_Land-DepressionIndex Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.2mm Solid Line with repeating Dk-Brown1815 0.1mm wt 0.5mm long ticks
Miscellaneous Note: Each depression contour shall have ticks spaced equally on each descending depression contour. Where the slope of a depression is
such that the contours become very close, the length of the depression ticks may be reduced by 1/2 to achieve legibility.
Line Style: Element Name: Dk-Brown1815_0.20mmSolidLine Element Reference: L00023 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.1mm-0.5mmLenTick Element Reference: P00065 Element Type: Point - Simple
Repeating Point Interval: Variable
L00112
Element Name: Cyan_SnowIce-DepressionIndex Colour Token: Cyan
Description: Cyan 0.2mm Solid Line with repeating Blue 0.1mm wt 0.5mm long ticks
Miscellaneous Note: Each depression contour shall have ticks spaced equally. Where the slope of a depression is such that the contours become very close,
the length of the depression ticks may be reduced by one-half to achieve legibility.
Line Style: Element Name: Cyan_0.2mmSolidLine Element Reference: L00015 Element Type: Line - Simple
Repeating Point: Element Name: Cyan_0.1mm-0.5mmLenTick Element Reference: P00055 Element Type: Point - Simple
Repeating Point Interval: Variable
L00113
Element Name: Dk-Brown1815_Land-DepressionIntermediate Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.1mm Solid Line with repeating Dk-Brown1815 0.1mm wt 0.5mm long ticks
Miscellaneous Note: Depression contours shall have ticks spaced equally on each descending depression contour line. Where the slope of a depression is
such that the contours become very close, the length of the depression ticks may be reduced by 1/2 to achieve legibility.
Line Style: Element Name: Dk-Brown1815_0.1mmSolidLine Element Reference: L00107 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.1mm-0.5mmLenTick Element Reference: P00065 Element Type: Point - Simple
Repeating Point Interval: Variable
F - 22
DN: 09-048 17 November 2009
L00114
Element Name: Cyan_SnowIce-DepressionIntermediate Colour Token: Cyan
Description: Cyan 0.1mm Solid Line with repeating Blue 0.1mm wt 0.5mm long ticks
Miscellaneous Note: Each depression contour shall have ticks spaced equally pointing into the depression. Where the slope of a depression is such that the
contours become very close, the length of the depression ticks may be reduced by 1/2 to achieve legibility.
Line Style: Element Name: Cyan_0.1mmSolidLine Element Reference: L00108 Element Type: Line - Simple
Repeating Point: Element Name: Cyan_0.1mm-0.5mmLenTick Element Reference: P00055 Element Type: Point - Simple
Repeating Point Interval: Variable
L00115
Element Name: Dk-Brown1815_Land-MoundIndex Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.2mm Solid Line with repeating Dk-Brown1815 0.1mm wt 0.5 long ticks (2.0mm tick interval)
Line Style: Element Name: Dk-Brown1815_0.20mmSolidLine Element Reference: L00023 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.1mm-0.5mmLenTick Element Reference: P00065 Element Type: Point - Simple
Repeating Point Interval: 2.0mm
L00116
Element Name: Dk-Brown1815_Land-MoundIntermediate Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.1mm Solid Line with repeating Dk-Brown1815 0.1mm wt 0.5 long ticks (2.0mm tick interval)
Line Style: Element Name: Dk-Brown1815_0.1mmSolidLine Element Reference: L00107 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.1mm-0.5mmLenTick Element Reference: P00065 Element Type: Point - Simple
Repeating Point Interval: 2.0mm
F - 23
DN: 09-048 17 November 2009
L00119
Element Name: Dk-Brown1815_Land-DepressionAuxillary Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.1mm Dash Line (0.1mm wt, 3.0mm dash, 0.5mm gap) with repeating Dk-Brown1815 0.1mm wt 0.5 long ticks
Line Style: Element Name: Dk-Brown1815_0.1mm-3mmLenDashLine Element Reference: L00109 Element Type: Line - Styled
Repeating Point: Element Name: Dk-Brown1815_0.1mm-0.5mmLenTick Element Reference: P00065 Element Type: Point - Simple
Repeating Point Interval: Centred on each dash
L00120
Element Name: Cyan_SnowIce-DepressionAuxillary Colour Token: Cyan
Description: Cyan 0.1mm Dash Line (0.1mm wt, 3.0mm dash, 0.5mm gap) with repeating Cyan 0.1mm wt 0.5 long ticks
Line Style: Element Name: Cyan_0.1mm-3mmLenDashLine Element Reference: L00110 Element Type: Line - Styled
Repeating Point: Element Name: Cyan_0.1mm-0.5mmLenTick Element Reference: P00055 Element Type: Point - Simple
Repeating Point Interval: Centred on each dash
L00124
Element Name: Dk-Brown1815-54_International-Boundary Colour Token:
Dk-Brown1815-54
Description: Black 0.5mm Dash Line (0.5mm wt, long dash 7.0mm, short dash 2.0mm; 1 long / 2 shorts) Dk-Brown1815-54 2mm 60 degree overprint
Miscellaneous Note: Dk-Brown1815-54 overprint is centred on dashed line. Black Dashed line sequence is 1 long dash followed by 2 short dashes.
Line Style: Element Name: Black_0.5mm-7mmDash-2x2mmDashLine Element Reference: L00122 Element Type: Line - Styled
2nd Line Style: Element Name: Dk-Brown1815-54_2.0mmScreenedLine Element Reference: L00123 Element Type: Line - Simple
L00127
Element Name: Dk-Brown1815-42_ArmisticeLine-Boundary Colour Token:
Dk-Brown1815-42
Description: Black 0.3mm Dash Line (0.3mm wt, 5.0mm dash; 1.0mmgap) Dk-Brown1815-42 2.0mm 60 degree overprint
Miscellaneous Note: Dk-Brown1815-42 overprint is centred on dashed line.
Line Style: Element Name:
Black_0.3mm-5mmLenDash-1.0mmGapLine
Element Reference: L00125 Element Type: Line - Styled
2nd Line Style: Element Name: Dk-Brown1815-42_2.0mmScreenedLine Element Reference: L00126 Element Type: Line - Simple
F - 24
DN: 09-048 17 November 2009
L00129
Element Name: Black_AdminBoundary Colour Token: Black
Description: Black 0.2mm Dash Line (0.2mm wt, 6.1mm dash, 2.5mm gap) with 0.25mm filled dot centred in dash gap
Line Style: Element Name:
Black_0.2mm-6.1mmLenDash-2.5mmGapLine
Element Reference: L00128 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.25mmDotFilled Element Reference: P00047 Element Type: Point - Simple
Repeating Point Interval: Dot centred in dash gap
L00132
Element Name: Black_AdminDivision-Primary Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 7.0mm dash, 1.0mm gap) and Black 0.3mm, 2mm dash, 1.0mm gap
Miscellaneous Note: Long and short dashes alternate
Line Style: Element Name:
Black_0.3mm-7mmLenDash-1.0mmGapLine
Element Reference: L00130 Element Type: Line - Styled
2nd Line Style: Element Name: Black_0.3mm-2mmLenDash-1mmGapLine Element Reference: L00131 Element Type: Line - Styled
L00134
Element Name: Black_AdminDivision-Tertiary Colour Token: Black
Description: Black 0.3mm Dash Line (0.3mm wt, 7.0mm dash, 1.5mm gap) and 0.4mm Filled Dot (repeating)
Miscellaneous Note: Sequence is 1 linear dash followed by 3 dots. Gap is 1.5mm between individual dots and between group of dots and the dash.
Line Style: Element Name:
Black_0.3mm-7mmLenDash-1.5mmGapLine
Element Reference: L00133 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.4mmDotFilled Element Reference: P00082 Element Type: Point - Simple
Repeating Point Interval: 1.5mm
F - 25
DN: 09-048 17 November 2009
L00136
Element Name: Black_MaritimeArea-International Colour Token: Black
Description: Black 0.25mm Dash Line (0.25mm wt, 3.0mm dash, 1.0mm gap) and 0.25mm, 1.5mm long tick
Miscellaneous Note: The tick is centred on every second dash
Line Style: Element Name:
Black_0.25mm-3mmLenDash-1mmGapLine
Element Reference: L00135 Element Type: Line - Styled
Repeating Point: Element Name: Black_0.25mm-1.5mmLenTick Element Reference: P00083 Element Type: Point - Simple
Repeating Point Interval: centred on every second dash
L00139
Element Name: Black_DamAreaPerimeter Colour Token: Black
Description: Upstream: Black 0.4mm Solid Line Downstream: Black 0.1mm Solid Line
Miscellaneous Note: Use 0.4mm Black solid line for upstream and 0.1mm Black solid line for downstream
Line Style: Element Name: Black_0.4mmSolidLine Element Reference: L00013 Element Type: Line - Simple
2nd Line Style: Element Name: Black_0.1mmSolidLine Element Reference: L00007 Element Type: Line - Simple
L00140
Element Name: Black_RailwayInRoad Colour Token: Black
Description: Black 0.15mm Solid Line with Black 0.15mm wt 1.5mm long tick repeating
Miscellaneous Note: Ticks are centred and 90 degrees to line.
Line Style: Element Name: Black_0.15mmSolidLine Element Reference: L00008 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm
F - 26
DN: 09-048 17 November 2009
L00141
Element Name: Black_RailwaySide-StandardNonElectric Colour Token: Black
Description: Black 0.15mm Solid Line with Black 0.15mm wt 1.5mm long tick repeating
Miscellaneous Note: Ticks are centred and 90 degrees to line.
Line Style: Element Name: Black_0.15mmSolidLine Element Reference: L00008 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.15mm-1.5mmLenTick Element Reference: P00044 Element Type: Point - Simple
Repeating Point Interval: Initial offset: 3.2mm after that 6.4mm
L00144
Element Name: Black_Dotted-Line Colour Token: Black
Description: Black 0.25mm diameter filled dots repeating along the line but without a line style. The spacing between dots is 0.750mm
Line Style: Element Name: 0mmLine Element Reference: L00145 Element Type: Line - Simple
Repeating Point: Element Name: Black_0.25mmDotFilled Element Reference: P00047 Element Type: Point - Simple
Repeating Point Interval: 0.75mm
L00148
Element Name: Black_Cableway_Obstruction Colour Token: Black
Description: Black Dashed line (0.2mm wt, 2.0mm Dash, 0.5 Gap), with repeating "sawtooth pattern" ticks (Blue072 0.4mm wt, 2.5mm length, alternating
between 60 and 120 degree orientation)
Line Style: Element Name:
Black_0.2mm-2mmLenDash-0.5mmGapLine
Element Reference: L00032 Element Type: Line - Styled
Repeating Point: Element Name: Blue072_Sawtooth_Left Element Reference: P00105 Element Type: Point - Simple
Repeating Point Interval: Repeating Point 2 immediately follows Repeating Point 1.
2nd Repeating Point: Element Name: Blue072_Sawtooth_Right Element Type: Point - SimpleElement Reference: P00106
Repeating Point Interval: Repeating Point 1 immediately follows Repeating Point 2.
F - 27
DN: 09-048 17 November 2009
L00150
Element Name: Blue072_Aircraft_Revetment Colour Token: Blue072
Description: Blue072 open square fixed at the start and repeating along a Blue072 dashed line
Miscellaneous Note: The Blue072 open square is centred in the dash gap and completely fills the "gap" in the dashed line.
Line Style: Element Name:
Blue072_0.2mm-4mmLenDash-1mmGapLine
Element Reference: L00149 Element Type: Line - Styled
Repeating Point: Element Name: Blue072_0.2mm-1.0mmwideSquareOpen Element Reference: P00110 Element Type: Point - Simple
Repeating Point Interval: 5.0mm such that the square is centred within the Gap and fills the gap.
Fix Point at Start of Line:
Element Name: Blue072_0.2mm-1.0mmwideSquareOpen Element Type: Point - SimpleElement Reference: P00110
L00152
Element Name: Black_CommunicationLine_Obstruction Colour Token: Black
Description: Black Dashed line (0.1mm wt, 2.0mm Dash, 0.5 Gap), with repeating "sawtooth pattern" ticks (Blue072 0.4mm wt, 2.5mm length, alternating
between 60 and 120 degree orientation)
Line Style: Element Name:
Black_0.1mm-2mmLenDash-0.5mmGapLine
Element Reference: L00029 Element Type: Line - Styled
Repeating Point: Element Name: Blue072_Sawtooth_Left Element Reference: P00105 Element Type: Point - Simple
Repeating Point Interval: Repeating Point 2 immediately follows Repeating Point 1.
2nd Repeating Point: Element Name: Blue072_Sawtooth_Right Element Type: Point - SimpleElement Reference: P00106
Repeating Point Interval: Repeating Point 1 immediately follows Repeating Point 2.
L00154
Element Name: Road_HardSurface_Operational_Single_NoMedian Colour Token: Dk-Brown1815
Description: Black 0.6mm Solid Line (0.6mm wt) and Dk-Brown1815 0.3mm Solid Line (0.3mm wt)
Miscellaneous Note: The Black_0.6mmSolidLine line and the Dk-Brown1815_0.3mmSolidLine are centred on the linear feature. The Black line is placed
beneath the Dk-Brown1815_0.3mmSolidLine to form the cased line.
Line Style: Element Name: Black_0.6mmSolidLine Element Reference: L00153 Element Type: Line - Simple
2nd Line Style: Element Name: Dk-Brown1815_0.3mmSolidLine Element Reference: L00105 Element Type: Line - Simple
F - 28
DN: 09-048 17 November 2009
L00157
Element Name: Road_HardSurface_Operational_Dual_NoMedian Colour Token: Dk-Brown1815
Description: Black 0.8mm Solid Line (0.8mm wt) and Dk-Brown1815 0.5mm Solid Line (0.5mm wt)
Miscellaneous Note: The Black_0.8mmSolidLine line and the Dk-Brown1815_0.5mmSolidLine are centred on the linear feature. The Black line is placed
beneath the Dk-Brown1815_0.5mmSolidLine to form the cased line.
Line Style: Element Name: Black_0.8mmSolidLine Element Reference: L00155 Element Type: Line - Simple
2nd Line Style: Element Name: Dk-Brown1815_0.5mmSolidLine Element Reference: L00156 Element Type: Line - Simple
L00160
Element Name: Road_HardSurface_Operational_Median_MultipleLanes Colour Token: Dk-Brown1815
Description: Black 1.0mm Solid Line (1.0mm wt), Black 0.1mm Solid Line (0.1mm wt) and Dk-Brown1815 0.6mm Solid Line (0.6mm wt)
Miscellaneous Note: The Black_1.0mmSolidLine line, the Dk-Brown1815_0.6mmSolidLine, and the Black_0.1mmSolidLine are centred on the linear feature.
The Black 1.0mm line is placed at the bottom and the Dk-Brown1815_0.6mmSolidLine is placed beneath the 0.1mm Black line.
Line Style: Element Name: Black_1.0mmSolidLine Element Reference: L00158 Element Type: Line - Simple
2nd Line Style: Element Name: Dk-Brown1815_0.6mmSolidLine Element Reference: L00159 Element Type: Line - Simple
3rd Line Style: Element Name: Black_0.1mmSolidLine Element Reference: L00007 Element Type: Line - Simple
L00161
Element Name: Road_LooseSurface_Operational_NoMedian_1Lane Colour Token: Dk-Brown1815
Description: Black 0.6mm Solid Line (0.6mm wt), White 0.3mm Solid Line (0.3mm wt) and Dk-Brown1815 0.3mm 3.0mm Dash/1.5 Gap dashed line
Miscellaneous Note: The 3 lines are centred on the linear geometry. The Black 0.6mm Solid line is placed on the bottom, the PaperWhite 0.3mm Solid line is
placed in the middle and the Dk-Brown1815 0.3 3mm Dash/1.5mm Gap line is placed on top.
Line Style: Element Name: Black_0.6mmSolidLine Element Reference: L00153 Element Type: Line - Simple
2nd Line Style: Element Name: PaperWhite_0.3mmSolidLine Element Reference: L00166 Element Type: Line - Simple
3rd Line Style: Element Name:
Dk-Brown1815_0.3mm-3mmLenDash-1.5mmGapLine
Element Reference: L00191 Element Type: Line - Styled
F - 29
DN: 09-048 17 November 2009
L00162
Element Name: Road_LooseSurface_Operational_NoMedian_MultipleLanes Colour Token: Dk-Brown1815
Description: Black 0.8mm Solid Line (0.8mm wt) with alternating repeating points Dk-Brown1815_0.5mm-3.0mm_Line and PaperWhite_0.5mm-1.5mm_Line
Miscellaneous Note: The 3 lines are centred on the linear geometry. The Black 0.8mm Solid line is placed on the bottom, the PaperWhite 0.5mm Solid line is
placed in the middle and the Dk-Brown1815 0.5 3mm Dash/1.5mm Gap line is placed on top.
Line Style: Element Name: Black_0.8mmSolidLine Element Reference: L00155 Element Type: Line - Simple
2nd Line Style: Element Name: PaperWhite_0.5mmSolidLine Element Reference: L00186 Element Type: Line - Simple
3rd Line Style: Element Name:
Dk-Brown1815_0.5mm-3mmLenDash-1.5mmGapLine
Element Reference: L00192 Element Type: Line - Styled
L00165
Element Name: Road_HardSurface_Construction_NoMedian_1Lane Colour Token: Dk-Brown1815
Description: PaperWhite 0.6mm Solid Line and Black_0.6mm-2.5mmLenDash-0.5mmGapLine and Dk-Brown1815_0.3mm-2.5mmLenDash-0.5mmGapLine
Miscellaneous Note: The PaperWhite 0.6mm solid line is placed beneath the Black_0.6mm-2.5mmLenDash-0.5mmGapLine line and it is placed beneath the
Dk-Brown1815_0.3mm-2.5mmLenDash-0.5mmGapLine line. The gaps are coincident between the two dashed lines.
Line Style: Element Name: PaperWhite_0.6mmSolidLine Element Reference: L00182 Element Type: Line - Simple
2nd Line Style: Element Name:
Black_0.6mm-2.5mmLenDash-0.5mmGapLine
Element Reference: L00163 Element Type: Line - Styled
3rd Line Style: Element Name:
Dk-Brown1815_0.3mm-2.5mmLenDash-0.5mmGapLine
Element Reference: L00164 Element Type: Line - Styled
L00167
Element Name: Road_Fair_Loose_Operational_ClassUnknown Colour Token: Black
Description: Black 0.6mm Solid Line and PaperWhite 0.3mm Solid line. The Black 0.6mm Solid Line is placed beneath the PaperWhite 0.3mm line. Both lines
are centred on the linear geometry.
Miscellaneous Note: Both lines are centred on the linear geometry with the Black 0.6mm Solid Line beneath the PaperWhite 0.3mm Solid line to form the
casing.
Line Style: Element Name: Black_0.6mmSolidLine Element Reference: L00153 Element Type: Line - Simple
2nd Line Style: Element Name: PaperWhite_0.3mmSolidLine Element Reference: L00166 Element Type: Line - Simple
F - 30
DN: 09-048 17 November 2009
L00171
Element Name: Road_HardSurface_Construction_Median_MultipleLanes Colour Token: Black
Description: PaperWhite 1.0 solid line, Black_1.0 dashed line, Dk-Brown1815_0.6mm dashed line, and Black_0.1mm dashed line. The 4 lines are all centred
on the line. Bot: PaperWhite line, Mid Bot: Black 1.0 line, Mid Top: Dk-Brown1815 line, Top: Black_0.1 line.
Miscellaneous Note: The 4 lines are centred on the linear geometry. The gaps are coincident. Display Level: Bottom:PaperWhite 1.0mm Bottom
Mid:Black_1.0mm-2.5mmLenDash-0.5mm, Top Mid:Dk-Brown1815_0.6mm-2.5mmLenDash-0.5mmGapLine Top:
Black_0.1mm-2.5mmLenDash-0.5mmGapLine.
Line Style: Element Name: PaperWhite_1.0mmSolidLine Element Reference: L00184 Element Type: Line - Simple
2nd Line Style: Element Name:
Black_1.0mm-2.5mmLenDash-0.5mmGapLine
Element Reference: L00168 Element Type: Line - Styled
3rd Line Style: Element Name:
Dk-Brown1815_0.6mm-2.5mmLenDash-0.5mmGapLine
Element Reference: L00169 Element Type: Line - Styled
4th Line Style: Element Name:
Black_0.1mm-2.5mmLenDash-0.5mmGap-0.5mmGapLine
Element Reference: L00170 Element Type: Line - Styled
L00174
Element Name: Road_HardSurface_Construction_NoMedian_MultipleLanes Colour Token: Dk-Brown1815
Description: PaperWhite 0.8mm Solid Line and Black_0.8mm-2.5mmLenDash-0.5mmGapLine and Dk-Brown1815_0.5mm-2.5mmLenDash-0.5mmGapLine
Miscellaneous Note: The PaperWhite 0.8mm solid line is placed beneath the Black_0.8mm-2.5mmLenDash-0.5mmGapLine line and it is placed beneath the
Dk-Brown1815_0.5mm-2.5mmLenDash-0.5mmGapLine line. The gaps are coincident between the two lines.
Line Style: Element Name: PaperWhite_0.8mmSolidLine Element Reference: L00183 Element Type: Line - Simple
2nd Line Style: Element Name:
Black_0.8-2.5mmLenDash-0.5mmGap-0.5mmGapLine
Element Reference: L00172 Element Type: Line - Styled
3rd Line Style: Element Name:
Dk-Brown1815_0.5mm-2.5mmLenDash-0.5mmGapLine
Element Reference: L00173 Element Type: Line - Styled
F - 31
DN: 09-048 17 November 2009
L00179
Element Name: Dk-Brown1815_Land-DepressionQuarterAuxillary Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.1mm Dash Line (0.1mm wt, 1.5mm dash, 0.5mm gap) with repeating Dk-Brown1815 0.1mm wt 0.5 long ticks
Line Style: Element Name:
Dk-Brown1815_0.1mm-1.5mmLenDashLine
Element Reference: L00117 Element Type: Line - Styled
Repeating Point: Element Name: Dk-Brown1815_0.1mm-0.5mmLenTick Element Reference: P00065 Element Type: Point - Simple
Repeating Point Interval: Centred on each dash
L00180
Element Name: Cyan_SnowIce-DepressionQuarterAuxillary Colour Token: Cyan
Description: Cyan 0.1mm Dash Line (0.1mm wt, 1.5mm dash, 0.5mm gap) with repeating Cyan 0.1mm wt 0.5 long ticks
Line Style: Element Name:
Cyan_0.1mm-1.5mmLenDash-0.5mmGapLine
Element Reference: L00118 Element Type: Line - Styled
Repeating Point: Element Name: Cyan_0.1mm-0.5mmLenTick Element Reference: P00055 Element Type: Point - Simple
Repeating Point Interval: Centred on each dash
L00181
Element Name: Black_Lock_Line Colour Token: Black
Description: Black 0.3mm Solid Line with Black 0.1mm "V" afixed to each end. The apex of the "V" points upstream.
Miscellaneous Note: The apex of the "V" placed at both ends of the line points upstream.
Line Style: Element Name: Black_0.3mmSolidLine Element Reference: L00011 Element Type: Line - Simple
Fix Point at Start of Line:
Element Name: Black_0.1mmV Element Type: Point - SimpleElement Reference: P00035
Fix Point at End of Line:
Element Name: Black_0.1mmV Element Type: Point - SimpleElement Reference: P00035
F - 32
DN: 09-048 17 November 2009
L00189
Element Name: Road_LooseSurface_Construction_NoMedian_1Lane Colour Token: Dk-Brown1815
Description: This line is a combination of 4 lines which are centred on the linear geometry. Display Level: Bottom:PaperWhite 0.6mm Bottom
Mid:Black_0.6mm-3.0mmLenDash-1.5mm, Top Mid:PaperWhite 0.3mm Top: Dk-Brown1815_0.3mm-3-3-1.5-1.5-1.5-3mm Dashed line
Miscellaneous Note: The 4 lines are centred on the linear geometry. Display Level: Bottom:PaperWhite 0.6mm Bottom
Mid:Black_0.6mm-3.0mmLenDash-1.5mm, Top Mid:PaperWhite 0.3mm Top: Dk-Brown1815_0.3mm-3-3-1.5-1.5-1.5-3mm Dashed line
Line Style: Element Name: PaperWhite_0.6mmSolidLine Element Reference: L00182 Element Type: Line - Simple
2nd Line Style: Element Name:
Black_0.6mm-3.0mmLenDash-1.5mmGapLine
Element Reference: L00175 Element Type: Line - Styled
3rd Line Style: Element Name: PaperWhite_0.3mmSolidLine Element Reference: L00166 Element Type: Line - Simple
4th Line Style: Element Name:
Dk-Brown1815_0.3mm-3-3-1.5-1.5-1.5-3DashLine
Element Reference: L00187 Element Type: Line - Styled
L00190
Element Name: Road_LooseSurface_Construction_NoMedian_MultipleLanes Colour Token: Dk-Brown1815
Description: This line is a combination of 4 lines which are centred on the linear geometry. Display Level: Bottom:PaperWhite 0.8mm Bottom
Mid:Black_0.8mm-3.0mmLenDash-1.5mm, Top Mid:PaperWhite 0.5mm Top: Dk-Brown1815_0.5mm-3-3-1.5-1.5-1.5-3mm Dashed line
Miscellaneous Note: The 4 lines are centred on the linear geometry. Display Level: Bottom:PaperWhite 0.8mm Bottom
Mid:Black_0.8mm-3.0mmLenDash-1.5mm, Top Mid:PaperWhite 0.5mm Top: Dk-Brown1815_0.5mm-3-3-1.5-1.5-1.5-3mm Dashed line
Line Style: Element Name: PaperWhite_0.8mmSolidLine Element Reference: L00183 Element Type: Line - Simple
2nd Line Style: Element Name:
Black_0.8mm-3.0mmLenDash-1.5mmGapLine
Element Reference: L00188 Element Type: Line - Styled
3rd Line Style: Element Name: PaperWhite_0.5mmSolidLine Element Reference: L00186 Element Type: Line - Simple
4th Line Style: Element Name:
Dk-Brown1815_0.5mm-3-3-1.5-1.5-1.5-3DashLine
Element Reference: L00185 Element Type: Line - Styled
L00194
Element Name: Dk-Brown1815_DamAreaPerimeter Colour Token: Dk-Brown1815
Description: Upstream: Dk-Brown1815 0.4mm Solid Line Downstream: Dk-Brown1815 0.1mm Solid Line
Miscellaneous Note: Use 0.4mm Dk-Brown1815 solid line for upstream and 0.1mm Dk-Brown1815 solid line for downstream
Line Style: Element Name: Dk-Brown1815_0.4mmSolidLine Element Reference: L00195 Element Type: Line - Simple
2nd Line Style: Element Name: Dk-Brown1815_0.1mmSolidLine Element Reference: L00107 Element Type: Line - Simple
F - 33
DN: 09-048 17 November 2009
L00196
Element Name: Dk-Brown1815_Cut Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.25mm Solid Line with Ticks (0.25mm wt, 0.5mm long, 1.5mm interval)
Miscellaneous Note: Tick end is on and at 90 degrees to line. Tick Interval: 1.5mm
Line Style: Element Name: Dk-Brown1815_0.25mmSolidLine Element Reference: L00024 Element Type: Line - Simple
Repeating Point: Element Name: Dk-Brown1815_0.25mm-0.5mmLenTick Element Reference: P00070 Element Type: Point - Simple
Repeating Point Interval: 1.5mm
L00197
Element Name: Black_Ford Colour Token: Black
Description: A black dashed line (0.2mm wt, 2.0mm Dash Length, 0.5mm Dash Gap) with cyan "V"s attached at the start and end of the line. The "V"s apex
point inward towards the related hydrographic feature
Line Style: Element Name:
Black_0.2mm-2mmLenDash-0.5mmGapLine
Element Reference: L00032 Element Type: Line - Styled
Fix Point at Start of Line:
Element Name: Cyan_0.3mm-0.7mmLenV Element Type: Point - SimpleElement Reference: P00062
Fix Point at End of Line:
Element Name: Cyan_0.3mm-0.7mmLenV Element Type: Point - SimpleElement Reference: P00062
F - 34
DN: 09-048 17 November 2009
Line - Simple
L00005
Element Name: Blue072_0.4mmSolidLine Colour Token: Blue072
Description: Blue072 0.4mm Solid Line (0.4mm wt)
Line Weight: 0.4mm
L00006
Element Name: Blue072_0.73mmSolidLine Colour Token: Blue072
Description: Blue072 0.73mm Solid Line (0.73mm wt)
Line Weight: 0.73mm
L00007
Element Name: Black_0.1mmSolidLine Colour Token: Black
Description: Black 0.1mm Solid Line (0.1mm wt)
Line Weight: 0.1mm
L00008
Element Name: Black_0.15mmSolidLine Colour Token: Black
Description: Black 0.15mm Solid Line (0.15mm wt)
Line Weight: 0.15mm
L00009
Element Name: Black_0.2mmSolidLine Colour Token: Black
Description: Black 0.2mm Solid Line (0.2mm wt)
Line Weight: 0.2mm
L00010
Element Name: Black_0.25mmSolidLine Colour Token: Black
Description: Black 0.25mm Solid Line (0.25mm wt)
Line Weight: 0.25mm
F - 35
DN: 09-048 17 November 2009
L00011
Element Name: Black_0.3mmSolidLine Colour Token: Black
Description: Black 0.3mm Solid Line (0.3mm wt)
Line Weight: 0.3mm
L00013
Element Name: Black_0.4mmSolidLine Colour Token: Black
Description: Black 0.4mm Solid Line (0.4mm wt)
Line Weight: 0.4mm
L00014
Element Name: Black_0.5mmSolidLine Colour Token: Black
Description: Black 0.5mm Solid Line (0.5mm wt)
Line Weight: 0.5mm
L00015
Element Name: Cyan_0.2mmSolidLine Colour Token: Cyan
Description: Cyan 0.2mm Solid Line
Line Weight: 0.2mm
L00016
Element Name: Cyan_0.3mmSolidLine Colour Token: Cyan
Description: Cyan 0.3mm Solid Line
Line Weight: 0.3mm
L00017
Element Name: Cyan_0.4mmSolidLine Colour Token: Cyan
Description: Cyan 0.4mm Solid Line (0.4mm wt)
Line Weight: 0.4mm
F - 36
DN: 09-048 17 November 2009
L00019
Element Name: Black_0.3mmSolidCasedLine Colour Token: Black
Description: Black 0.3mm Solid Cased Line (0.3mm wt). Two 0.3mm solid lines equally offset and parallel to the linear geometry. The spacing between the
two lines is variable to the width of the over passing transportation feature
Miscellaneous Note: Casing: Spacing is variable to the width of the over passing transportation feature
Line Weight: 0.3mm
L00020
Element Name: Dk-Brown1815_0.25mmSolidCasedLine Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.25mm Solid Cased Line (0.25mm wt)
Miscellaneous Note: Casing: Spacing is variable to the width of the over passing feature
Line Weight: 0.25mm
L00021
Element Name: Green362_0.2mmSolidLine Colour Token: Green362
Description: Green362 0.2mm Solid Line (0.2mm wt)
Line Weight: 0.2mm
L00022
Element Name: Green362-54_0.4mmScreenedLine Colour Token: Green362-54
Description: Green362-54 0.4 Solid Screened Line (0.4mm wt)
Line Weight: 0.4mm
L00023
Element Name: Dk-Brown1815_0.20mmSolidLine Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.2mm Solid Line (0.2mm wt)
Line Weight: 0.2mm
L00024
Element Name: Dk-Brown1815_0.25mmSolidLine Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.25mm Solid Line (0.25mm wt)
Line Weight: 0.25mm
F - 37
DN: 09-048 17 November 2009
L00105
Element Name: Dk-Brown1815_0.3mmSolidLine Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.3mm Solid Line (0.3mm wt)
Line Weight: 0.3mm
L00107
Element Name: Dk-Brown1815_0.1mmSolidLine Colour Token: Dk-Brown1815
Description: Dk-Brown1815 0.1mm Solid Line (0.1mm wt)
Line Weight: 0.1mm
L00108
Element Name: Cyan_0.1mmSolidLine Colour Token: Cyan
Description: Cyan 0.1mm Solid Line (0.1mm wt)
Line Weight: 0.1mm
L00123
Element Name: Dk-Brown1815-54_2.0mmScreenedLine Colour Token:
Line Weight: 0.25mm Dash Length: 3.0mm Dash Spacing: 0.5mm
Repeating Point: Element Name: Dk-Brown1815_0.25mm-0.5mmLenTick Element Reference: P00070 Element Type: Point - Simple
F - 49
DN: 09-048 17 November 2009
G-1
Annex G – Point Elements
Point Elements
Each of the point elements used in Annex A Symbols have been listed only one time in this Annex.
Point Elements
DN: 09-048 17 November 2009
Point - Complex
P00075
Element Name: Church Colour Token: Black
Description: A Black filled square with all sides 0.5mm long/wide with a cross staff attached on the top of the filled square and centred along the side where it is
attached
Miscellaneous Note: Bottom of stem touches the mid-point of the TOP edge of the square feature
Shape: Element Name: Black_0.2mmCross Element Reference: P00013 Element Type: Point - Shape
Simple Point: Element Name: Black_0.5mmSquareFilled Element Reference: P00050 Element Type: Point - Simple
P00076
Element Name: Mosque Colour Token: Black
Description: A Black filled square with all sides 0.5mm long/wide with a crescent staff attached on the top of the filled square and centred along the side where it is
attached
Miscellaneous Note: Bottom of stem touches the mid-point of the TOP edge of the square feature
Shape: Element Name: Black_0.2mmCrescent Element Reference: P00014 Element Type: Point - Shape
Simple Point: Element Name: Black_0.5mmSquareFilled Element Reference: P00050 Element Type: Point - Simple
P00077
Element Name: Synagogue Colour Token: Black
Description: A Black filled square with all sides 0.5mm long/wide with a Tee staff attached on the top of the filled square and centred along the side where it is
attached
Miscellaneous Note: Bottom of stem touches the mid-point of the TOP edge of the square feature
Shape: Element Name: Black_0.2mmTee Element Reference: P00017 Element Type: Point - Shape
Simple Point: Element Name: Black_0.5mmSquareFilled Element Reference: P00050 Element Type: Point - Simple
G - 2
DN: 09-048 17 November 2009
P00079
Element Name: Passenger-Terminal Colour Token: Black
Description: A filled square inside of a larger open square. The smaller filled square is centred along and touching one side of the open square
Miscellaneous Note: Point element "Black_SquareFilled" positioned inside the open square, touching side of open square that is parallel to railway track on the
same side as the terminal building
Shape: Element Name: Black_0.8mmSquareFilled Element Reference: P00006 Element Type: Point - Simple
Simple Point: Element Name:
Black_0.1mm-1.2mmwideSquareOpen
Element Reference: P00033 Element Type: Point - Simple
P00080
Element Name: Surface-Bunker Colour Token: Dk-Brown1815
Description: Dk-Brown1815 ticks radiating out from the top 1/2 of an ellipse. Beneath the ticks is a solid Dk-Brown1815 line along with a black headline and wing
ticks.
Miscellaneous Note: Wing tick ends touch the base of the "Dk-Brown1815_SurfaceBunker" point element
Shape: Element Name:
Dk-Brown1815_SurfaceBunker
Element Reference: P00021 Element Type: Point - Shape
Simple Point: Element Name:
Black_15mmHeadline&WingTicks
Element Reference: P00037 Element Type: Point - Simple
P00089
Element Name: Blue072_HospitalHelipad Colour Token: Blue072
Description: A Blue072 open square with H centred inside the square
Miscellaneous Note: Open Square with H centred inside it
Simple Point: Element Name:
Blue072_0.4mm-5.0mmwideSquareOpen
Element Reference: P00087 Element Type: Point - Simple
2nd Simple Point: Element Name: Blue072_H Element Reference: P00086 Element Type: Point - Simple
G - 3
DN: 09-048 17 November 2009
P00090
Element Name: Blue072_Helipad Colour Token: Blue072
Description: A Blue072 open circle with H centred inside the circle
Miscellaneous Note: Open Circle with H centred inside it
Simple Point: Element Name: Blue072_0.4mmOpenCircle Element Reference: P00088 Element Type: Point - Simple
2nd Simple Point: Element Name: Blue072_H Element Reference: P00086 Element Type: Point - Simple
P00096
Element Name: Black_HazardousRock(Covers/Uncovers) Colour Token: Black
Description: Combination of BlackStarburst(Rock) and BlackDotExterior(Rock)
Simple Point: Element Name: Black_DotExterior(Rock) Element Reference: P00093 Element Type: Point - Simple
2nd Simple Point: Element Name: Black_Starburst(Rock) Element Reference: P00095 Element Type: Point - Simple
P00104
Element Name: Black_Shrine Colour Token: Black
Description: A Combination of the 0.8mm open circle and the Point - Shape: Black_0.2mmCross. The stem of the Point - Shape is attached to the top of the open
circle.
Shape: Element Name: Black_0.2mmCross Element Reference: P00013 Element Type: Point - Shape
Simple Point: Element Name: Black_0.8mmCircleOpen Element Reference: P00103 Element Type: Point - Simple
P00125
Element Name: Cyan_PT_Ford Colour Token: Cyan
Description: Two Cyan "V" elements touch at their apexes.
Simple Point: Element Name: Cyan_0.3mm-0.7mmLenV Element Reference: P00062 Element Type: Point - Simple
2nd Simple Point: Element Name: Cyan_0.3mm-0.7mmLenV Element Reference: P00062 Element Type: Point - Simple
G - 4
DN: 09-048 17 November 2009
Point - Shape
P00001
Element Name: Black_PickAxeShovel Colour Token: Black
Description: This point element depicts a crossed black pickaxe and shovel
Miscellaneous Note: See Element: Black_PickAxeShovel in Annex H for detailed drawing instructions.
Detail: Black_PickAxeShovel
P00002
Element Name: Black_PickAxeShovel180 Colour Token: Black
Description: This point element depicts a crossed black pickaxe and shovel rotated 180 degrees.
Miscellaneous Note: See Element: Black_PickAxeShovel in Annex H for detailed drawing instructions. Image will need to be rotated 180 degrees from image
pictured in Annex H.
Orientation: Rotated 180 degrees
Detail: Black_PickAxeShovel180
P00008
Element Name: Blue072_Obstruction Colour Token: Blue072
Description: A Blue072 vertical obstruction
Miscellaneous Note: See Element: Blue072_Obstruction in Annex H for detailed drawing instructions.
Detail: Blue072_Obstruction
P00009
Element Name: Black_CircleOpen Colour Token: Black
Description: Black open circle (Diameter = 1.0mm, lineweight of boundary around circumference - 0.15mm).
Miscellaneous Note: See Element: Black_CircleOpen in Annex H for detailed drawing instructions.
Detail: Black_CircleOpen
G - 5
DN: 09-048 17 November 2009
P00010
Element Name: Black_CircleOpenWithDot Colour Token: Black
Description: Black open circle with a smaller black filled circle/dot in its centre. Outer open circle has a diameter of 1.25mm and a lineweight of 0.15mm for the
boundary around the circumference. The inner dot has a diameter of 0.3mm and is filled.
Miscellaneous Note: See Element: Black_CircleOpenWithDot in Annex H for detailed drawing instructions.
Detail: Black_CircleOpenWithDot
P00011
Element Name: Black_0.2mmHospitalCrossOnStem Colour Token: Black
Description: Black filled circle (diameter of circle is 1.75mm) with a cross or plus centred in the circle. The cross/plus is paper white. The circle rests upon a "stem"
that is 0.6mm long with a lineweight of 0.25mm.
Miscellaneous Note: See Element: Black_0.2mmHospitalCrossOnStem in Annex H for detailed drawing instructions.
Detail: Black_0.2mmHospitalCrossOnStem
P00012
Element Name: Black_0.2mmHospitalCross Colour Token: Black
Description: Black filled circle (diameter of circle is 1.75mm) with a cross or plus centred in the circle. The cross/plus is paper white.
Miscellaneous Note: See Element: Black_0.2mmHospitalCross in Annex H for detailed drawing instructions.
Detail: Black_0.2mmHospitalCross
P00013
Element Name: Black_0.2mmCross Colour Token: Black
Description: Black cross (total height is 1.10 mm and total width is 0.60 mm. The cross piece (horizontal piece) is 0.60 mm long. Lineweight is 0.2mm.
Miscellaneous Note: See Element: Black_0.2mmCross in Annex H for detailed drawing instructions.
Detail: Black_0.2mmCross
P00014
Element Name: Black_0.2mmCrescent Colour Token: Black
Description: Black crescent on a stem. Height of Crescent is 0.45mm. Height of stem is 0.65mm. Lineweights are 0.2mm.
Miscellaneous Note: See Element: Black_0.2mmCrescent in Annex H for detailed drawing instructions.
Detail: Black_0.2mmCrescent
G - 6
DN: 09-048 17 November 2009
P00015
Element Name: Black_0.2mmMarabout Colour Token: Black
Description: Black crescent on a stem connected to a "non-filled" circle with a dot in the centre. The "non-filled" circle containing the dot is below the crescent with a
stem. Lineweight is 0.2mm. Dot diameter is 0.25mm. Stem height is 0.6mm.
Miscellaneous Note: See Element: Black_0.2mmMarabout in Annex H for detailed drawing instructions.
Detail: Black_0.2mmMarabout
P00016
Element Name: Black_0.2mmFlag Colour Token: Black
Description: Black flag on stem. The flag is 0.5mm tall on a 0.7mm tall stem. The flag is 0.7mm wide. The lineweight for the stem is 0.2mm.
Miscellaneous Note: See Element: Black_0.2mmFlag in Annex H for detailed drawing instructions.
Detail: Black_0.2mmFlag
P00017
Element Name: Black_0.2mmTee Colour Token: Black
Description: A black "T" (capital T). The "T" is 0.60 mm across and 0.85mm tall. The lineweight is 0.2mm.
Miscellaneous Note: See Element: Black_0.2mmTee in Annex H for detailed drawing instructions.
Detail: Black_0.2mmTee
P00018
Element Name: Black_0.2mmTemple Colour Token: Black
Description: The box lineweight is 0.2mm. The small arc radii is 0.35mm. The large arc radius 0.43mm. The top of the symbol is horizontally symetrical. The box
is 1.18mm across.
Miscellaneous Note: See Element: Black_0.2mmTemple in Annex H for detailed drawing instructions.
Detail: Black_0.2mmTemple
P00019
Element Name: Black_0.2mmPagoda Colour Token: Black
Description: The box lineweight is 0.2mm. The arc radii is 0.44mm. The top is horizontally symetrical. The box is 0.8mm across and 0.7mm high.
Miscellaneous Note: See Element: Black_0.2mmPagoda in Annex H for detailed drawing instructions.
Detail: Black_0.2mmPagoda
G - 7
DN: 09-048 17 November 2009
P00020
Element Name: Blue072_Pylon Colour Token: Blue072
Description: A Blue072 pylon
Miscellaneous Note: See Element: Blue072_Pylon in Annex H for detailed drawing instructions.
Orientation: Centred at 90 degrees to the line
Detail: Blue072_Pylon
P00021
Element Name: Dk-Brown1815_SurfaceBunker Colour Token: Dk-Brown1815
Description: A Dk-Brown1815 Surface Bunker
Miscellaneous Note: See Element: Dk-Brown1815_SurfaceBunker in Annex H for detailed drawing instructions.
Detail: Dk-Brown1815_SurfaceBunker
P00022
Element Name: Black_0.2mmCairn Colour Token: Black
Description: A Black Cairn (Line weight is 0.2 mm)
Miscellaneous Note: See Element: Black_0.2mmCairn in Annex H for detailed drawing instructions.
Detail: Black_0.2mmCairn
P00023
Element Name: Black_0.2mmU Colour Token: Black
Description: A Black "U" (Line weight is 0.2 mm)
Miscellaneous Note: See Element: Black_0.2mmU in Annex H for detailed drawing instructions.
Detail: Black_0.2mmU
P00025
Element Name: Blue072_Beacon Colour Token: Blue072
Description: A Blue072 5-pointed filled star with an open circle / hole at the centre of the 5-pointed star
Miscellaneous Note: See Element: Blue072_Beacon in Annex H for detailed drawing instructions.
Detail: Blue072_Beacon
G - 8
DN: 09-048 17 November 2009
P00026
Element Name: Cyan_SpringPerennial Colour Token: Cyan
Description: A Cyan Spring (Perennial)
Miscellaneous Note: See Element: Cyan_SpringPerennial in Annex H for detailed drawing instructions.
Orientation: Tail of feature is downstream to drainage or to the lines of latitude when drain is not present
Detail: Cyan_SpringPerennial
P00027
Element Name: Dk-Brown1815_Geothermal Colour Token: Dk-Brown1815
Description: A Dk-Brown1815 Geothermal
Miscellaneous Note: See Element: Dk-Brown1815_Geothermal in Annex H for detailed drawing instructions.
Orientation: Tail of feature is downstream to drainage or to the lines of latitude when drain is not present
Detail: Dk-Brown1815_Geothermal
P00028
Element Name: Cyan_CircleFilledwithOpenOffsetCircleInside Colour Token: Cyan
Description: A Cyan filled circle (1.5 mm diameter) with an open circle offset inside of it
Miscellaneous Note: See Element: Cyan_CircleFilledwithOpenOffsetCircleInside in Annex H for detailed drawing instructions.
Element Name: Black_0.2mmMountainPass Colour Token: Black
Description: A pair of black parentheses which open away from each other.
Miscellaneous Note: See Element: Black_0.2mmMountainPass in Annex H for detailed drawing instructions.
Detail: Black_0.2mmMountainPass
G - 9
DN: 09-048 17 November 2009
P00030
Element Name: Green362_Tree Colour Token: Green362
Description: A Green362 Tree outline with 2 dots beside it
Miscellaneous Note: See Element: Green362_Tree in Annex H for detailed drawing instructions.
Detail: Green362_Tree
P00031
Element Name: Black_0.2mmStupa Colour Token: Black
Description: A Black Stupa (Line weight is 0.2 mm)
Miscellaneous Note: See Element: Black_0.2mmStupa in Annex H for detailed drawing instructions.
Detail: Black_0.2mmStupa
P00032
Element Name: Cyan_SpringNonPerennial Colour Token: Cyan
Description: A Cyan Spring (Non-perennial)
Miscellaneous Note: See Element: Cyan_SpringNonPerennial in Annex H for detailed drawing instructions.
Orientation: Tail of feature is downstream to drainage or to the lines of latitude when drain is not present
Detail: Cyan_SpringNonPerennial
P00040
Element Name: Cyan_CircleOpen Colour Token: Cyan
Description: A Cyan open circle
Miscellaneous Note: See Element: Cyan_CircleOpen in Annex H for detailed drawing instructions.
Detail: Cyan_CircleOpen
P00041
Element Name: Cyan_DotFilled Colour Token: Cyan
Description: A Cyan filled circle (or dot)
Miscellaneous Note: See Element: Cyan_DotFilled in Annex H for detailed drawing instructions.
Detail: Cyan_DotFilled
G - 10
DN: 09-048 17 November 2009
P00097
Element Name: Black_Doughnut Colour Token: Black
Description: A Black filled circle with a white hole cut out of the middle.
Miscellaneous Note: See Element: Black_Doughnut in Annex H for detailed drawing instructions.
Detail: Black_Doughnut
P00098
Element Name: Blue072_AnchorInsignia Colour Token: Blue072
Description: A Blue072 Anchor inside of a blue072 open circle
Miscellaneous Note: See Element: Blue072_AnchorInsignia in Annex H for detailed drawing instructions.
Detail: Blue072_AnchorInsignia
P00100
Element Name: Black_Building_Destroyed Colour Token: Black
Description: A Black building destroyed ("stair step" shape)
Miscellaneous Note: See Element: Black_Building_Destroyed in Annex H for detailed drawing instructions.
Detail: Black_Building_Destroyed
P00101
Element Name: Blue072_Multiple_VOs Colour Token: Blue072
Description: A Blue072 shape for VOs which are in congested areas or areas of overprinting
Miscellaneous Note: See Element: Blue072_Multiple_VOs in Annex H for detailed drawing instructions.
Detail: Blue072_Multiple_VOs
P00108
Element Name: Black_Fortification Colour Token: Black
Description: A Black open square (0.1 mm wt, 0.8 mm long/wide) with 4 black 0.5 mm long ticks (0.1 mm wt) extending out from each corner of the square at an
angle of 45, 135, 225, or 315 degrees.
Miscellaneous Note: See Element: Black_Fortification in Annex H for detailed drawing instructions.
Detail: Black_Fortification
G - 11
DN: 09-048 17 November 2009
P00109
Element Name: Black_Building_Greenhouse Colour Token: Black
Description: A Open Rectangle with a cross hatch pattern inside
Miscellaneous Note: See Element: Black_Building_Greenhouse in Annex H for detailed drawing instructions.
Detail: Black_Building_Greenhouse
P00113
Element Name: Blue072_PT_LinearObstruction Colour Token: Blue072
Description: A Blue072 Point Linear Obstruction (Multiple vertical obstruction symbol with a zigzag line above it)
Miscellaneous Note: See Element: Blue072_LinearObstruction in Annex H for detailed drawing instructions
Detail: Blue072_PT_LinearObstruction
P00118
Element Name: Black_School Colour Token: Black
Description: A Black square with a flag on top.
Miscellaneous Note: See Element Black_School in Annex H for detailed drawing instructions
Detail: Black_School
P00120
Element Name: Blue072_0.3mmDotFilled Colour Token: Blue072
Description: A Blue072 0.3mm diameter filled circle (or dot)
Miscellaneous Note: See Element Blue072_0.3mmDotFilled in Annex H for detailed drawing instructions
Detail: Blue072_0.3mmDotFilled
P00126
Element Name: Black_Cemetery_Unknown Colour Token: Black
Description: A Black "L" centred inside of a dashed black square.
Miscellaneous Note: See Element: Black_Cemetery_Unknown in Annex H for detailed drawing instructions
Detail: Black_Cemetery_Unknown
G - 12
DN: 09-048 17 November 2009
Point - Simple
P00006
Element Name: Black_0.8mmSquareFilled Colour Token: Black
Description: A Black filled square with all sides 0.8mm long/wide
Length: 0.8mm
P00007
Element Name: Cyan_0.8mmSquareFilled Colour Token: Cyan
Description: A Cyan filled square with all sides 0.8mm long/wide
Length: 0.8mm
P00024
Element Name: Black_0.1mm-0.8mmwideSquareOpen Colour Token: Black
Description: A Black open square (0.1mm wt, 0.8mm long/wide)
Line Weight: 0.1mm Length: 0.8mm
P00033
Element Name: Black_0.1mm-1.2mmwideSquareOpen Colour Token: Black
Description: A Black open square (0.1mm wt, 1.2mm long/wide)
Line Weight: 0.1mm Length: 1.2mm
P00034
Element Name: Black_0.1mmOpenCirclewithLine Colour Token: Black
Description: A Black open circle with line (Line weight is 0.1 mm)
Miscellaneous Note: Interior Line crosses through centre of circle: Line wt of line: 0.1mm Length of line: 1.5mm Orientation of line: at 45 degrees to South neatline
Diameter: 1.5mm
Line Weight: 0.1mm
G - 13
DN: 09-048 17 November 2009
P00035
Element Name: Black_0.1mmV Colour Token: Black
Description: A Black "V". Line weight is 0.1mm, Length of each leg of the "V": 0.8mm
Miscellaneous Note: Angle between stems: 90 degrees
Orientation: Apex is centred on single line drain. Apex points upstream.
Line Weight: 0.1mm Length: 0.8mm
P00036
Element Name: Black_0.1mmY Colour Token: Black
Description: A Black "Y" (Line weight is 0.1 mm)
Miscellaneous Note: Angle between V stems: 90 degrees. All line lengths are the same (0.8mm). Symbol is not rotated towards inside of cave because Angle of
Orientation (AOO) is not available on this feature.
Line Weight: 0.1mm Length: 0.8mm
P00037
Element Name: Black_15mmHeadline&WingTicks Colour Token: Black
Description: A Black 0.15mm lineweight line that is 2.5mm long. At each end of the 2.5mm long line there is a Black 0.15mm lineweight line that is 0.8mm long
Element Name: Black_0.15mm-0.75mmLenTick Colour Token: Black
Description: A Black 0.15mm lineweight line that is 0.75mm long
Orientation: Based 90 degrees to line
Line Weight: 0.15mm Length: 0.75mm
G - 14
DN: 09-048 17 November 2009
P00039
Element Name: Black_0.15mm-0.75mmLenV Colour Token: Black
Description: A black "V". Lineweight: 0.15mm, Length of each leg of the "V": 0.75mm
Miscellaneous Note: Angle between stems: 90 degrees
Orientation: Apex is centred on line ends
Line Weight: 0.15mm Length: 0.75mm
P00042
Element Name: Black_0.15mm-0.75mmLenWingTick Colour Token: Black
Description: A 0.75mm fixed length line (line weight 0.15mm) that is angled at 45, 135, 225 or 315 to the line with which it attaches.
Miscellaneous Note: angle depends on which end of the feature the ticks are placed
Orientation: Based 45, 135, 225, and 315 degrees to line outward, from centre of line ends
Line Weight: 0.15mm Length: 0.75mm
P00043
Element Name: Black_0.15mm-1mmLenTick Colour Token: Black
Description: A Black 0.15mm lineweight line that is 1.0mm long
Orientation: Centred 90 degrees to line
Line Weight: 0.15mm Length: 1.0mm
P00044
Element Name: Black_0.15mm-1.5mmLenTick Colour Token: Black
Description: A Black 0.15mm lineweight line that is 1.5mm long
Orientation: Centred 90 degrees to line
Line Weight: 0.15mm Length: 1.5mm
G - 15
DN: 09-048 17 November 2009
P00045
Element Name: Black_0.2mm-0.7mmLenV Colour Token: Black
Description: Two Black 0.2mm linear segments each 0.7mm long which intersect at a 90 degree angle
Miscellaneous Note: Angle between stems: 90 degrees
Orientation: Apex is centred on line ends
Line Weight: 0.2mm Length: 0.7mm
P00046
Element Name: Black_0.2mm-1.3mmLenX Colour Token: Black
Description: Two Black lines (each 0.2mm lineweight, 1.3mm length) intersect at a 45 degree angle to form an "X". Intersection is at the centre of each of the 2 line
segments.
Orientation: X lines of symbol are 45 degree angles and are centred one to another
Line Weight: 0.2mm Length: 1.3mm
P00047
Element Name: Black_0.25mmDotFilled Colour Token: Black
Description: A black filled 0.25mm diameter circle (dot)
Diameter: 0.25mm
P00048
Element Name: Black_0.3mmCircleOpen Colour Token: Black
Description: An open circle (line weight 0.3mm) whose diameter depends upon the width of the feature.
Diameter: variable depending on the width of
the feature
Line Weight: 0.3mm
P00049
Element Name: Black_0.5mmDotFilled Colour Token: Black
Description: A Black filled circle with a 0.5mm diameter
Diameter: 0.5mm
G - 16
DN: 09-048 17 November 2009
P00050
Element Name: Black_0.5mmSquareFilled Colour Token: Black
Description: A Black filled square with all sides 0.5mm long/wide
Length: 0.5mm
P00051
Element Name: Black_0.5mm-1.5LenLine Colour Token: Black
Description: A Black 0.5mm lineweight line that is 1.5mm long
Orientation: Centred 90 degrees to line
Line Weight: 0.5mm Length: 1.5mm
P00053
Element Name: Black_0.8mmDotFilled Colour Token: Black
Description: A Black filled circle with a 0.8mm diameter
Diameter: 0.8mm
P00055
Element Name: Cyan_0.1mm-0.5mmLenTick Colour Token: Cyan
Description: A Cyan 0.100mm lineweight line that is 0.5mm long
Orientation: Based 90 degrees to line
Line Weight: 0.1mm Length: 0.5mm
P00056
Element Name: Cyan_0.15mm-0.6mmLenTickCircle Colour Token: Cyan
Description: Cyan ticks (0.15mm lineweight, 0.6mm long) radiating out from an imaginary circle (diameter 1.500mm)
Miscellaneous Note: Tick Interval: 0.5mm radiating from centre of circular area. Tick placement: clockwise around an imaginary circle diameter of 1.5mm starting at
the 0 degree position in 45 degree increments
Orientation: Ticks are oriented 45 degrees from each other
Line Weight: 0.15mm Length: 0.6mm
G - 17
DN: 09-048 17 November 2009
P00057
Element Name: Cyan_0.15mmCircleOpen Colour Token: Cyan
Description: A Cyan open circle (Line weight is 0.15 mm; Diameter is 1.0 mm)
Diameter: 1.0mm
Line Weight: 0.15mm
P00058
Element Name: Cyan_0.2mm-0.7mmLenV Colour Token: Cyan
Description: Two Cyan 0.2mm linear segments each 0.7mm long which intersect at a 90 degree angle
Miscellaneous Note: Angle between stems: 90 degrees
Orientation: Apex is centred on line ends
Line Weight: 0.2mm Length: 0.7mm
P00059
Element Name: Cyan_0.2mm-1mmLenV Colour Token: Cyan
Description: Two Cyan lines (each 0.2mm lineweight 1.0mm length) intersect at a 90 degree angle. The intersection occurs at the one end of each of the line
segments to form a right angle.
Miscellaneous Note: Angle between stems: 90 degrees
Orientation: Apex points upstream and connects to drainage feature at apex
Line Weight: 0.2mm Length: 1.0mm
P00060
Element Name: Cyan_0.2mm-1.3mmLenLine Colour Token: Cyan
Description: A Cyan 0.2mm lineweight line that is 1.3mm long.
Orientation: Centred 90 degrees to line
Line Weight: 0.2mm Length: 1.3mm
P00061
Element Name: Cyan_0.2mm-1.5mmLenLine Colour Token: Cyan
Description: A Cyan 0.2mm lineweight line that is 1.5mm long
Orientation: Centred 90 degrees to line
Line Weight: 0.2mm Length: 1.5mm
G - 18
DN: 09-048 17 November 2009
P00062
Element Name: Cyan_0.3mm-0.7mmLenV Colour Token: Cyan
Description: A Cyan "V". The "V" is 0.7 mm long on each leg and has a line width of 0.3mm.
Miscellaneous Note: Angle between stems: 90 degrees
Orientation: Apex is centred on line ends
Line Weight: 0.3mm Length: 0.7mm
P00064
Element Name: Dk-Brown1815_0.1mmOpenCirclewithTicks Colour Token: Dk-Brown1815
Description: A Dk-Brown1815 0.1mm lineweight circle with a diameter of 1.0mm. Radiating out from the circle are alternating long (1.0mm long) and short (0.5mm)
ticks every 45 degrees
Miscellaneous Note: Ticks alternate in length (short tick 0.5mm length, long tick 1.000mm length) starting with a long tick at the top, each at 45 degree angle from
the last. Each tick connects with the outside of the circle radiating outwards.
Diameter: 1.0mm (circle)
Line Weight: 0.1mm Length: Long Tick: 1.0mm; Short
Tick: 0.5mm
P00065
Element Name: Dk-Brown1815_0.1mm-0.5mmLenTick Colour Token: Dk-Brown1815
Description: A Dk-Brown1815 0.1mm lineweight line that is 0.5mm long
Orientation: Based 90 degrees to line
Line Weight: 0.1mm Length: 0.5mm
P00066
Element Name: Dk-Brown1815_0.15mmTickCircle Colour Token: Dk-Brown1815
Description: Dk-Brown1815 ticks (0.15mm lineweight, 0.6mm long) radiating out from an imaginary circle (diameter 1.5mm)
Miscellaneous Note: Tick Interval: 0.5mm radiating from the centre of the circular area Tick Placement: Clockwise around an imaginary circle diameter of 1.5mm
starting at the 0 degrees position in 45 degree increments.
Orientation: Ticks are oriented 45 degrees from each other
Line Weight: 0.15mm Length: 0.6mm
G - 19
DN: 09-048 17 November 2009
P00067
Element Name: Dk-Brown1815_0.15mm-0.8mmLenTick Colour Token: Dk-Brown1815
Description: A Dk-Brown1815 0.15mm lineweight line that is 0.8mm long
Orientation: Centred 90 degrees to line
Line Weight: 0.15mm Length: 0.8mm
P00068
Element Name: Dk-Brown1815_0.2mm-0.5mmLenTick Colour Token: Dk-Brown1815
Description: A Dk-Brown1815 0.5mm length line with a line weight of 0.200mm
Orientation: Based 90 degrees to line
Line Weight: 0.2mm Length: 0.5mm
P00069
Element Name: Dk-Brown1815_0.2mm-1.0mmLenTick Colour Token: Dk-Brown1815
Description: A Dk-Brown1815 1.0mm length line with a line weight of 0.200mm
Orientation: Based 90 degrees to line
Line Weight: 0.2mm Length: 1.0mm
P00070
Element Name: Dk-Brown1815_0.25mm-0.5mmLenTick Colour Token: Dk-Brown1815
Description: A Dk-Brown1815 0.5mm length line with a line weight of 0.250mm
Orientation: Based 90 degrees to line
Line Weight: 0.25mm Length: 0.5mm
P00071
Element Name: Dk-Brown1815_0.25mmTickCircle Colour Token: Dk-Brown1815
Description: A set of Dk-Brown1815 ticks radiating out from a circle. The circle is not portrayed just a reference for building the symbol.
Miscellaneous Note: Centre (circle) diameter: 0.244mm Tick Placement: in 60 degree increments clockwise starting at 30 degrees from North. Overall Tick
diameter: 1.44mm
Diameter: 0.244mm
Line Weight: 0.25mm Length: 0.6mm
G - 20
DN: 09-048 17 November 2009
P00072
Element Name: Black_0.1mmTick-Entrance/Exit Colour Token: Black
Description: Black Entrance/Exit with 0.1mm lineweight wingtick and 0.2mm headline
Miscellaneous Note: Wing tick placed at 45 degree angle outward from centre of the headline end
Headline: Line weight: 0.2mm Length: 2.0mm Wing Tick: Line weight: 0.1mm Length: 0.6mm
P00073
Element Name: Black_0.2mmTick-Entrance/Exit Colour Token: Black
Description: A Black 0.2mm lineweight line 2.0mm long. At each endpoint is a Black wingtick 0.2mm lineweight line 0.6mm long. The wingtick is attached to the
2.0mm line at a 45 degree angle.
Miscellaneous Note: Wing tick placed at 45 degree angle outward from centre of the headline end
Headline: Line weight: 0.2mm Length: 2.0mm Wing Tick: Line weight: 0.2mm Length: 0.6mm
P00074
Element Name: Cyan0.2mmTick-Entrance/Exit Colour Token: Cyan
Description: A Cyan 0.2mm lineweight line 2.0mm long. At each endpoint is a Cyan wingtick 0.2mm lineweight line 0.6mm long. The wingtick is attached to the
2.0mm line at a 45 degree angle.
Miscellaneous Note: Wing tick placed at 45 degree angle outward from centre of the headline end
Headline: Line weight: 0.2mm Length: 2.0mm Wing Tick: Line weight: 0.2mm Length: 0.6mm
P00081
Element Name: Black_0.64mmDotFilled Colour Token: Black
Description: A 0.64mm diameter black filled circle
Diameter: 0.64mm
P00082
Element Name: Black_0.4mmDotFilled Colour Token: Black
Description: A 0.4mm diameter black filled circle
Miscellaneous Note: Circle is filled
Diameter: 0.4mm
G - 21
DN: 09-048 17 November 2009
P00083
Element Name: Black_0.25mm-1.5mmLenTick Colour Token: Black
Description: A Black line segment with line weight of 0.250mm and a length of 1.5mm.
Orientation: 90 degrees to line and centred on the line
Line Weight: 0.25mm Length: 1.5mm
P00084
Element Name: Black_PeatCutting Colour Token: Black
Description: Peat Cutting Pattern
Miscellaneous Note: Five (5) rectangles, two (2) rows staggered, three (3) on the bottom row, two(2) on top. Width 1.5mm Height 1.0mm
Line Weight: 0.1mm
P00086
Element Name: Blue072_H Colour Token: Blue072
Description: A Blue072 letter 'H'
Miscellaneous Note: Two (2) vertical lines with a lineweight of 0.4mm and a height of 3.0mm connected by a horizontal line with a lineweight of 0.4mm and a length
of 2.0mm to form a capital letter 'H'
Line Weight: 0.4mm
P00087
Element Name: Blue072_0.4mm-5.0mmwideSquareOpen Colour Token: Blue072
Description: A Blue072 open square (0.4mm wt, 5.0mm long/wide)
Miscellaneous Note: Open Square with lineweight of 0.4mm and sides of the square are 5.0mm long
Line Weight: 0.4mm Length: 5.0mm
P00088
Element Name: Blue072_0.4mmOpenCircle Colour Token: Blue072
Description: A Blue072 0.4mm lineweight open circle with a 5.0mm diameter
Miscellaneous Note: Open Circle with lineweight of 0.4mm and diameter of 5.0mm
Diameter: 5.0mm
Line Weight: 0.4mm
G - 22
DN: 09-048 17 November 2009
P00093
Element Name: Black_DotExterior(Rock) Colour Token: Black
Description: Black dots (diameter 0.25mm) are placed around a circle (diameter 3.0mm) centre of dots every 36 degrees starting 18 degrees east of north.
Miscellaneous Note: There are Black "dots" (diameter of dots 0.25mm) placed around the perimeter of a circle (3.0mm in diameter), the centre of the dots are every
36 degrees starting 18 degrees east of north.
Diameter: 0.25mm
P00095
Element Name: Black_Starburst(Rock) Colour Token: Black
Description: Lines (lineweight 0.1mm, length 1.5mm) oriented 60 degrees apart, starting at 30 degrees from North.
Miscellaneous Note: Lines (lineweight 0.1mm, length 1.5mm) oriented 60 degrees apart, starting at 30 degrees from North.
Line Weight: 0.1mm Length: 1.5mm
P00099
Element Name: Dk-Brown1815_0.5mmSquareFilled Colour Token: Dk-Brown1815
Description: A Dk-Brown1815 filled square with all sides 0.5mm long/wide
Length: 0.5mm
P00103
Element Name: Black_0.8mmCircleOpen Colour Token: Black
Description: A Black 0.8mm diameter open circle with a line weight of 0.15mm
Diameter: 0.8mm
Line Weight: 0.15mm
P00105
Element Name: Blue072_Sawtooth_Left Colour Token: Blue072
Description: Left half of the Blue072 Sawtooth pattern
Orientation: 60 degrees
Line Weight: 0.4mm Length: 2.5mm
G - 23
DN: 09-048 17 November 2009
P00106
Element Name: Blue072_Sawtooth_Right Colour Token: Blue072
Description: Right half of the Blue072 Sawtooth pattern
Orientation: 120 degrees
Line Weight: 0.4mm Length: 2.5mm
P00110
Element Name: Blue072_0.2mm-1.0mmwideSquareOpen Colour Token: Blue072
Description: A Blue072 open square (0.2mm wt, 1.0mm long/wide)
Line Weight: 0.2mm Length: 1.0mm
P00111
Element Name: Green362_0.1mmOpenCircle Colour Token: Green362
Description: A Green362 0.1mm wt. 0.4mm diameter open circle
Diameter: 0.4mm
Line Weight: 0.1mm
P00123
Element Name: Black_1.2mmSquareFilled Colour Token: Black
Description: A Black filled square with all sides 1.2mm long/wide
Length: 1.2mm
P00124
Element Name: Black_0.1mm_V Colour Token: Black
Description: A Black "V". Line weight is 0.1mm, Length of each leg of the "V": 0.8mm
Miscellaneous Note: Angle between stems: 90 degrees
Line Weight: 0.1mm Length: 0.8mm
G - 24
DN: 09-048 17 November 2009
H-1
Annex H – Detailed Drawing Instructions (normative)
Detailed Drawing Instructions
This Annex contains detailed drawing instructions for each of the point elements used in Annex A Symbols which could not be readily explained in a small set of parameters. The pictures shown in this Annex are not to scale, but have, at times, been enlarged to make it easier to view the drawing.
Detailed Drawing Instructions
DN: 09-048 17 November 2009
A Black Cairn (Line weight is 0.2
mm)
P00022
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmCairn
H - 2
DN: 09-048 17 November 2009
Black crescent on a stem. Height of
Crescent is 0.45mm. Height of stem
is 0.65mm. Lineweights are 0.2mm.
P00014
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmCrescent
Black cross (total height is 1.10 mm
and total width is 0.60 mm. The
cross piece (horizontal piece) is 0.60
mm long. Lineweight is 0.2mm.
P00013
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmCross
H - 3
DN: 09-048 17 November 2009
Black flag on stem. The flag is
0.5mm tall on a 0.7mm tall stem.
The flag is 0.7mm wide. The
lineweight for the stem is 0.2mm.
P00016
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmFlag
Black filled circle (diameter of circle
is 1.75mm) with a cross or plus
centred in the circle. The cross/plus
is paper white.
P00012
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmHospitalCross
H - 4
DN: 09-048 17 November 2009
Black filled circle (diameter of circle
is 1.75mm) with a cross or plus
centred in the circle. The cross/plus
is paper white. The circle rests
upon a "stem" that is 0.6mm long
with a lineweight of 0.25mm.
P00011
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmHospitalCrossOnStem
H - 5
DN: 09-048 17 November 2009
Black crescent on a stem connected
to a "non-filled" circle with a dot in
the centre. The "non-filled" circle
containing the dot is below the
crescent with a stem. Lineweight is
0.2mm. Dot diameter is 0.25mm.
Stem height is 0.6mm.
P00015
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmMarabout
H - 6
DN: 09-048 17 November 2009
A pair of black parentheses which
open away from each other.
P00029
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmMountainPass
H - 7
DN: 09-048 17 November 2009
The box lineweight is 0.2mm. The
arc radii is 0.44mm. The top is
horizontally symetrical. The box is
0.8mm across and 0.7mm high.
P00019
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmPagoda
H - 8
DN: 09-048 17 November 2009
A Black Stupa (Line weight is 0.2
mm)
P00031
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmStupa
A black "T" (capital T). The "T" is
0.60 mm across and 0.85mm tall.
The lineweight is 0.2mm.
P00017
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmTee
H - 9
DN: 09-048 17 November 2009
The box lineweight is 0.2mm. The
small arc radii is 0.35mm. The large
arc radius 0.43mm. The top of the
symbol is horizontally symetrical.
The box is 1.18mm across.
P00018
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmTemple
A Black "U" (Line weight is 0.2 mm)
P00023
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_0.2mmU
H - 10
DN: 09-048 17 November 2009
A Black building destroyed ("stair
step" shape)
P00100
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_Building_Destroyed
A Open Rectangle with a cross
hatch pattern inside
P00109
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_Building_Greenhouse
H - 11
DN: 09-048 17 November 2009
A Black "L" centred inside of a
dashed black square.
P00126
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_Cemetery_Unknown
Black open circle (Diameter =
1.0mm, lineweight of boundary
around circumference - 0.15mm).
P00009
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_CircleOpen
H - 12
DN: 09-048 17 November 2009
Black open circle with a smaller
black filled circle/dot in its centre.
Outer open circle has a diameter of
1.25mm and a lineweight of 0.15mm
for the boundary around the
circumference. The inner dot has a
diameter of 0.3mm and is filled.
P00010
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_CircleOpenWithDot
A Black filled circle with a white hole
cut out of the middle.
P00097
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_Doughnut
H - 13
DN: 09-048 17 November 2009
A Black open square (0.1 mm wt,
0.8 mm long/wide) with 4 black 0.5
mm long ticks (0.1 mm wt)
extending out from each corner of
the square at an angle of 45, 135,
225, or 315 degrees.
P00108
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_Fortification
This point element depicts a crossed
black pickaxe and shovel
P00001
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_PickAxeShovel
H - 14
DN: 09-048 17 November 2009
A Black square with a flag on top.
P00118
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Black_School
A Blue072 0.3mm diameter filled
circle (or dot)
P00120
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Blue072_0.3mmDotFilled
H - 15
DN: 09-048 17 November 2009
A Blue072 Anchor inside of a
blue072 open circle
P00098
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Blue072_AnchorInsignia
H - 16
DN: 09-048 17 November 2009
A Blue072 5-pointed filled star with
an open circle / hole at the centre of
the 5-pointed star
P00025
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Blue072_Beacon
H - 17
DN: 09-048 17 November 2009
A Blue072 shape for VOs which are
in congested areas or areas of
overprinting
P00101
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Blue072_Multiple_VOs
H - 18
DN: 09-048 17 November 2009
A Blue072 vertical obstruction
P00008
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Blue072_Obstruction
H - 19
DN: 09-048 17 November 2009
A Blue072 Point Linear Obstruction
(Multiple vertical obstruction symbol
with a zigzag line above it)
P00113
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Blue072_PT_LinearObstruction
H - 20
DN: 09-048 17 November 2009
A Blue072 pylon
P00020
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Blue072_Pylon
H - 21
DN: 09-048 17 November 2009
A Cyan filled circle (1.5 mm
diameter) with an open circle offset
inside of it
P00028
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Cyan_CircleFilledwithOpenOffsetCircleInside
A Cyan open circle
P00040
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Cyan_CircleOpen
H - 22
DN: 09-048 17 November 2009
A Cyan filled circle (or dot)
P00041
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Cyan_DotFilled
A Cyan Spring (Non-perennial)
P00032
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Cyan_SpringNonPerennial
H - 23
DN: 09-048 17 November 2009
A Cyan Spring (Perennial)
P00026
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Cyan_SpringPerennial
H - 24
DN: 09-048 17 November 2009
A Dk-Brown1815 Geothermal
P00027
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_Geothermal
H - 25
DN: 09-048 17 November 2009
A Dk-Brown1815 Surface Bunker
P00021
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_SurfaceBunker
H - 26
DN: 09-048 17 November 2009
A Green362 Tree outline with 2 dots
beside it
P00030
Point - Shape
Element Reference:
Element Name:
Element Type:
Description:
Green362_Tree
H - 27
DN: 09-048 17 November 2009
I-1
Annex I – Patterns
Patterns
Samples of the Patterns referenced in the MGCP Symbology Standard Annex A are provided in this annex. The Element Name and Element Reference provide the link to Annex A MGCP Symbols. Since the area patterns were inherited from the MIL-STD-2410 document, a historical reference has been made in the document for each of the patterns in Annex I to identify its original pattern number in the MIL-STD-2410 document. For example, the field “MIL-STD-2402 Reference: Area Pattern #108” means that the area pattern was originally AP-108 in the MIL-STD-2410 document dated 31 January 1995. The reader may wish to reference the listed area pattern in the MIL-STD-2410 dated 31 January 1995, for additional information.
DN: 09-048 17 November 2009
Patterns
Element Reference:
Element Name:
Element Type:
Description:
Black_PeateryFill
A00001
Area - Pattern
Black staggered brick fill pattern
MIL-STD-2410
Reference: Area Pattern #129
I - 2
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Black_ShantyTownFill
A00014
Area - Pattern
Black Shantytown Fill
MIL-STD-2410
Reference: Area Pattern #132
Element Reference:
Element Name:
Element Type:
Description:
Cyan_DryDrainageFill
A00020
Area - Pattern
Cyan Dry Drainage Fill
MIL-STD-2410
Reference: Area Pattern #95
I - 3
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Cyan_GlacierFill
A00017
Area - Pattern
Cyan Glacier Fill
MIL-STD-2410
Reference: Area Pattern #104
Element Reference:
Element Name:
Element Type:
Description:
Cyan_LP15Fill
A00021
Area - Pattern
Cyan Diagonal Line Fill - 35% coverage, 40L, 45 degree
angle lines.
MIL-STD-2410
Reference: Line Pattern #15
I - 4
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Cyan_LSIFill
A00015
Area - Pattern
Cyan Land Subject to Inundation Fill
MIL-STD-2410
Reference: Area Pattern #10
Element Reference:
Element Name:
Element Type:
Description:
Cyan_RiceFill
A00019
Area - Pattern
Cyan Rice Fill
MIL-STD-2410
Reference: Area Pattern #4
I - 5
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Cyan_SabkhaFill
A00016
Area - Pattern
Cyan Sabkha Fill
MIL-STD-2410
Reference: Area Pattern #103
Element Reference:
Element Name:
Element Type:
Description:
Cyan_SaltEvaporatorFill
A00044
Area - Pattern
A grid pattern comprised of 1.5mm x 1.5mm squares. Grid
alignment is parallel to longest axis of the perimeter line and
centred.
MIL-STD-2410
Reference: Lineweight: 0.2mm; Length: 1.5mm; Grid squares: 1.5mm x
1.5mm; Grid alignment parallel to longest axis of perimeter
line and centred
I - 6
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Cyan_SwampFill
A00018
Area - Pattern
Cyan Swamp Fill
MIL-STD-2410
Reference: Area Pattern #12
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_CrescentDunesFill
A00031
Area - Pattern
Dk-Brown1815 Crescent Sand Dunes Fill
MIL-STD-2410
Reference: Area Pattern #108
I - 7
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_DistortedSurfaceFill
A00030
Area - Pattern
Dk-Brown1815 Distorted Surface Fill
MIL-STD-2410
Reference: Area Pattern #103
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_DomeDunesFill
A00042
Area - Pattern
Dk-Brown1815 Dome Sand Dunes Fill
MIL-STD-2410
Reference: Area Pattern #126
I - 8
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_LinearDunesFill
A00043
Area - Pattern
DK-Brown1815 Linear Sand Dunes Fill
MIL-STD-2410
Reference: Area Pattern #118
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_MoraineFill
A00022
Area - Pattern
Dk-Brown1815 Moraine Fill
MIL-STD-2410
Reference: Area Pattern #99
I - 9
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_RippleDunesFill
A00032
Area - Pattern
Dk-Brown1815 Ripple Sand Dunes Fill
MIL-STD-2410
Reference: Area Pattern #112
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_SandandGravelFill
A00036
Area - Pattern
Dk-Brown1815 Sand and Gravel Fill
MIL-STD-2410
Reference: Area Pattern #99
I - 10
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_SandFill
A00035
Area - Pattern
Dk-Brown1815 Sand Fill
MIL-STD-2410
Reference: Area Pattern #95
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_StarDunesFill
A00033
Area - Pattern
Dk-Brown1815 Star Sand Dunes Fill
MIL-STD-2410
Reference: Area Pattern #120
I - 11
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Dk-Brown1815_TransverseDunesFill
A00034
Area - Pattern
Dk-Brown1815 Transverse Sand Dunes Fill
MIL-STD-2410
Reference: Area Pattern #127
Element Reference:
Element Name:
Element Type:
Description:
Green362_CaneFill
A00050
Area - Pattern
Green362 Cane Fill
MIL-STD-2410
Reference: Area Pattern #86
I - 12
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Green362_DeciduousTreeFill
A00011
Area - Pattern
Green362 DeciduousTreeFill area pattern
MIL-STD-2410
Reference: Area Pattern #54
Element Reference:
Element Name:
Element Type:
Description:
Green362_EvergreenTreeFill
A00012
Area - Pattern
Green362 EvergreenTreeFill area pattern
MIL-STD-2410
Reference: Area Pattern #60
I - 13
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Green362_GrasslandFill
A00026
Area - Pattern
Green362 Grassland Fill
MIL-STD-2410
Reference: Area Pattern #66
Element Reference:
Element Name:
Element Type:
Description:
Green362_MangroveFill
A00025
Area - Pattern
Green362 Mangrove Fill area pattern
MIL-STD-2410
Reference: Area Pattern #8
I - 14
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Green362_MixedTreeFill
A00013
Area - Pattern
Green362 MixedTreeFill area pattern
MIL-STD-2410
Reference: Area Pattern #63
Element Reference:
Element Name:
Element Type:
Description:
Green362_NipaPalmFill
A00024
Area - Pattern
Green362 Nipa Palm Fill area pattern
MIL-STD-2410
Reference: Area Pattern #7
I - 15
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Green362_OrchardPlantationFill
A00028
Area - Pattern
Green362 Orchard/Plantation Fill
MIL-STD-2410
Reference: Area Pattern #74
Element Reference:
Element Name:
Element Type:
Description:
Green362_ScrubThicketFill
A00027
Area - Pattern
Green362 Scrub/Thicket Fill
MIL-STD-2410
Reference: Area Pattern #68
I - 16
Patterns
DN: 09-048 17 November 2009
Element Reference:
Element Name:
Element Type:
Description:
Green362_VineyardHopFill
A00029
Area - Pattern
Green362 Vineyard/Hops Fill
MIL-STD-2410
Reference: Area Pattern #77
Element Reference:
Element Name:
Element Type:
Description:
Woodland-ScatteredTrees
A00047
Area - Pattern
Green362 Woodland Scattered Trees Fill
MIL-STD-2410
Reference: Area Pattern #44
I - 17
DN: 09-048 17 November 2009
J-1
Annex J - Conformance (normative)
Conformance
For symbols to conform to this standard they must meet the following criteria.
• Symbols shall be “visually equivalent” to those symbol graphics in the standard. Visually equivalent symbols are those that would be recognized by users as representing the same feature or information. Symbols on actual maps shall conform to the delineation of the geospatial feature (area, line, point). Shapes shown in this standard are representative examples only. All labels shall be shown in accordance with this standard. Conditional attribute labels will be filled in with the applicable information associated with the feature instance rather than the generic attribute labels shown in the standard.
• Colours on printed maps shall be in accordance with Annex B – Colour.
DN: 09-048 17 November 2009
K-1
Annex K – Additional Information
Additional information
This portrayal standard was prepared by the Defence Geospatial Information Working Group (DGIWG) for Multinational Geospatial Co-production Program (MGCP) member nations, and other NATO members who intend to generate map products from MGCP data. Recommendations for improving this standard should be sent to the DGIWG Technical Coordinator for consideration.
Index
Index (sorted by Feature Name)
DN: 09-048 17 November 2009
Feature Name Feature Code Symbol Page Label Page
A - 2 C - 2Administrative BoundaryAdministrative Boundary (Line)
A - 5 C - 3Administrative DivisionAdministrative Division (Area)
A - 6 C - 3AGB005Aerodrome (Area)
A - 7 C - 4PGB220Air Obstruction (Point)
A - 8 C - 4LGB050Aircraft Revetment (Line)
A - 9 C - 4PGB010Airport Navigation Lights (Point)
A - 10 C - 4AAK030Amusement Park (Area)
A - 10 N/AAGB015Apron (Area)
A - 11 C - 5LBH010Aqueduct (Line)
A - 15 N/APBH010Aqueduct (Point)
A - 16 C - 6AAL012Archaeological Site (Area)
A - 16 N/APAL012Archaeological Site (Point)
A - 17 C - 6ABA050Beach (Area)
A - 18 C - 6PBA050Beach (Point)
A - 19 C - 7ABB190Berthing Structure (Area)
A - 20 C - 8LBB190Berthing Structure (Line)
A - 21 C - 8ABH015Bog (Area)
A - 22 C - 9ABB041Breakwater (Area)
A - 23 C - 9LBB041Breakwater (Line)
A - 24 C - 10LAQ040Bridge (Line)
A - 27 C - 11AAL015Building (Area)
A - 32 C - 14PAL015Building (Point)
A - 42 C - 18AAL020Built-Up Area (Area)
A - 44 C - 18PAL020Built-Up Area (Point)
A - 45 C - 19LAT041Cableway (Line)
A - 47 N/APAL025Cairn (Point)
A - 47 C - 18AAK060Camp-site (Area)
A - 48 C - 19ABH020Canal (Area)
L - 1
Feature Name Feature Code Symbol Page Label Page
DN: 09-048 17 November 2009
A - 49 C - 19LBH020Canal (Line)
A - 50 N/AAEC010Cane (Area)
A - 51 C - 19LAP010Cart Track (Line)
A - 51 C - 19PAC020Catalytic Cracker (Point)
A - 52 C - 20LAQ064Causeway (Line)
A - 52 C - 20PDB030Cave (Point)
A - 53 C - 21AAL030Cemetery (Area)
A - 55 C - 21PAL030Cemetery (Point)
A - 58 C - 22PAH070Checkpoint (Point)
A - 58 C - 22AAJ010Circular Irrigation System (Area)
A - 59 N/APBI010Cistern (Point)
A - 59 C - 23AEC040Cleared Way (Area)
A - 60 C - 23LAT060Communication Line (Line)
A - 61 C - 23AAT050Communication Station (Area)
A - 62 C - 24PAT080Communication Tower (Point)
A - 64 C - 25PAQ060Control Tower (Point)
A - 65 C - 25LAF020Conveyor (Line)
A - 66 C - 26PAF030Cooling Tower (Point)
A - 68 C - 27PAF040Crane (Point)
A - 70 C - 27AEA010Crop Land (Area)
A - 71 N/ACulvertCulvert (Point)
A - 72 N/ALDB070Cut (Line)
A - 75 N/ALDB071Cut Line (Line)
A - 77 C - 28ABI020Dam (Area)
A - 78 C - 28LBI020Dam (Line)
A - 79 C - 28PBI020Dam (Point)
A - 81 C - 29PAT010Dish Aerial (Point)
A - 83 C - 30AAB000Disposal Site (Area)
A - 84 C - 30ABH030Ditch (Area)
A - 85 N/ALBH030Ditch (Line)
L - 2
Feature Name Feature Code Symbol Page Label Page
DN: 09-048 17 November 2009
A - 86 N/AABB090Dry Dock (Area)
A - 87 C - 31Elevation ContourElevation Contour (Line)
A - 103 C - 32ADB090Embankment (Area)
A - 105 C - 32LDB090Embankment (Line)
A - 108 N/APAQ090Entrance and/or Exit (Point)
A - 109 C - 33AAA010Extraction Mine (Area)
A - 110 C - 33PAA010Extraction Mine (Point)
A - 112 C - 33AAK090Fairground (Area)
A - 112 N/ALAL070Fence (Line)
A - 113 C - 34LAQ070Ferry Crossing (Line)
A - 113 C - 34PAQ070Ferry Crossing (Point)
A - 114 C - 34PAF070Flare Pipe (Point)
A - 116 N/ALBH070Ford (Line)
A - 117 N/APBH070Ford (Point)
A - 117 N/AAEC060Forest Clearing (Area)
A - 118 C - 35AAH050Fortification (Area)
A - 118 N/APAH050Fortification (Point)
A - 119 C - 35LDB110Geologic Fault (Line)
A - 120 C - 35ADB115Geothermal Outlet (Area)
A - 120 N/APDB115Geothermal Outlet (Point)
A - 121 N/AABJ030Glacier (Area)
A - 121 C - 35AAK100Golf Course (Area)
A - 122 C - 36AAM030Grain Elevator (Area)
A - 122 C - 36PAM030Grain Elevator (Point)
A - 124 N/AAAM020Grain Storage Structure (Area)
A - 124 C - 37PAM020Grain Storage Structure (Point)
A - 126 N/AAEB010Grassland (Area)
A - 127 C - 37ABB043Groin (Area)
A - 128 C - 37LBB043Groin (Line)
A - 128 C - 37ABB005Harbour (Area)
L - 3
Feature Name Feature Code Symbol Page Label Page
DN: 09-048 17 November 2009
A - 129 C - 38PBD130Hazardous Rock (Point)
A - 130 C - 38AAD050Heating Facility (Area)
A - 130 C - 38PAD050Heating Facility (Point)
A - 131 N/ALEA020Hedgerow (Line)
A - 132 C - 39PGB030Helipad (Point)
A - 133 C - 39AGB035Heliport (Area)
A - 134 C - 39AAJ030Holding Pen (Area)
A - 134 N/ALBJ040Ice Cliff (Line)
A - 135 N/APBJ060Ice Peak (Point)
A - 136 C - 39LAQ075Ice Route (Line)
A - 136 C - 39International Date LineInternational Date Line (Line)
A - 137 C - 40ABA030Island (Area)
A - 138 C - 40ABH080Lake (Area)
A - 140 N/AABH090Land Subject to Inundation (Area)
A - 141 N/ALBA010Land Water Boundary (Line)
A - 142 C - 41PGB040Launch Pad (Point)
A - 143 C - 41PBC050Lighthouse (Point)
A - 145 C - 42ABI030Lock (Area)
A - 146 C - 42LBI030Lock (Line)
A - 147 C - 42PBI030Lock (Point)
A - 147 C - 42ABH050Marine Farm (Area)
A - 148 C - 42Maritime AreaMaritime Area (Line)
A - 148 C - 42PBB155Maritime Signal Station (Point)
A - 149 N/AAED010Marsh (Area)
A - 150 C - 43PAL130Memorial Monument (Point)
A - 152 C - 44ASU001Military Installation (Area)
A - 152 C - 44PSU001Military Installation (Point)
A - 153 C - 45AAM040Mineral Pile (Area)
A - 153 C - 45PAM040Mineral Pile (Point)
A - 155 C - 46PAQ110Mooring Mast (Point)
L - 4
Feature Name Feature Code Symbol Page Label Page
DN: 09-048 17 November 2009
A - 156 C - 46ABJ020Moraine (Area)
A - 157 C - 46PDB150Mountain Pass (Point)
A - 157 C - 47PZD040Named Location (Point)
A - 158 C - 47PBH170Natural Pool (Point)
A - 159 C - 48PAL240Non-communication Tower (Point)
A - 160 C - 48AEC020Oasis (Area)
A - 161 C - 49PBD110Offshore Platform (Point)
A - 162 C - 49AAK120Park (Area)
A - 163 C - 49AAL140Particle Accelerator (Area)
A - 164 C - 50LBH110Penstock (Line)
A - 166 C - 51LAQ113Pipeline (Line)
A - 169 C - 52LAT030Power Line (Line)
A - 171 C - 53AAD010Power Station (Area)
A - 171 C - 53PAD010Power Station (Point)
A - 173 C - 53AAD030Power Substation (Area)
A - 173 C - 53PAD030Power Substation (Point)
A - 174 C - 54AAC000Processing Facility (Area)
A - 174 C - 54PAC000Processing Facility (Point)
A - 175 C - 54AAL170Public Square (Area)
A - 176 C - 54AAQ116Pumping Station (Area)
A - 176 C - 54PAQ116Pumping Station (Point)
A - 177 C - 55AAA012Quarry (Area)
A - 178 C - 55PAA012Quarry (Point)
A - 179 C - 55LAK130Racetrack (Line)
A - 180 C - 56PAT045Radar Station (Point)
A - 182 C - 57LAN010Railway (Line)
A - 200 C - 69LAN050Railway Sidetrack (Line)
A - 204 N/APAN075Railway Turntable (Point)
A - 204 C - 69AAN060Railway Yard (Area)
A - 205 C - 69ABH120Rapids (Area)
L - 5
Feature Name Feature Code Symbol Page Label Page
DN: 09-048 17 November 2009
A - 205 C - 69LBH120Rapids (Line)
A - 206 C - 69PBH120Rapids (Point)
A - 207 C - 70AAK190Recreational Pier (Area)
A - 207 C - 70LAK190Recreational Pier (Line)
A - 208 C - 70AAB010Recycling Site (Area)
A - 209 C - 70ABH130Reservoir (Area)
A - 210 C - 70ABH135Rice Field (Area)
A - 211 C - 71PAA040Rig (Point)
A - 213 C - 72ABH140River (Area)
A - 214 C - 72LBH140River (Line)
A - 215 C - 73LAP030Road (Line)
A - 226 C - 74AAQ135Roadside Rest Area (Area)
A - 227 N/AADB160Rock Formation (Area)
A - 227 N/APDB160Rock Formation (Point)
A - 228 C - 74AAL200Ruins (Area)
A - 228 C - 75AGB055Runway (Area)
A - 229 N/AABH160Sabkha (Area)
A - 229 C - 75ABH155Salt Evaporator (Area)
A - 230 C - 75ADB170Sand Dunes (Area)
A - 233 C - 75PGB065Seaplane Base (Point)
A - 234 N/ALBB230Seawall (Line)
A - 235 C - 5AAL105Settlement (Area)
A - 235 C - 75PAL105Settlement (Point)
A - 236 C - 76AAC030Settling Pond (Area)
A - 237 C - 76ABB240Slipway (Area)
A - 238 C - 76LBI040Sluice Gate (Line)
A - 238 C - 76PBI040Sluice Gate (Point)
A - 239 C - 77PAF010Smokestack (Point)
A - 240 C - 77ABJ100Snow Field and/or Ice-Field (Area)
A - 241 C - 78ADA010Soil Surface Region (Area)
L - 6
Feature Name Feature Code Symbol Page Label Page
DN: 09-048 17 November 2009
A - 243 C - 79PAD020Solar Panel (Point)
A - 244 C - 80Spot ElevationSpot Elevation (Point)
A - 245 C - 81AAK160Stadium (Area)
A - 245 C - 81PAK160Stadium (Point)
A - 247 N/ALDB010Steep Terrain Face (Line)
A - 247 C - 81AAM010Storage Depot (Area)
A - 248 C - 82AAM070Storage Tank (Area)
A - 248 C - 82PAM070Storage Tank (Point)
A - 250 C - 82ABD100Structural Pile (Area)
A - 250 C - 82PBD100Structural Pile (Point)
A - 251 C - 83AAM060Surface Bunker (Area)
A - 251 C - 83PAM060Surface Bunker (Point)
A - 252 N/AAED020Swamp (Area)
A - 252 N/AAGB075Taxiway (Area)
A - 253 C - 83AFA100Test Site (Area)
A - 253 N/AAEB020Thicket (Area)
A - 254 C - 83ABA040Tidal Water (Area)
A - 254 C - 83LAP050Trail (Line)
A - 255 C - 84ABB140Training Wall (Area)
A - 255 C - 84LBB140Training Wall (Line)
A - 256 C - 84AAQ125Transportation Station (Area)
A - 256 C - 84PAQ125Transportation Station (Point)
A - 256 C - 84ABJ110Tundra (Area)
A - 257 C - 85LAQ130Tunnel (Line)
A - 261 N/APBH145Vainishing Point (Point)
A - 262 C - 85AAQ140Vehicle Lot (Area)
A - 262 C - 85AZD020Void Collection Area (Area)
A - 263 C - 86ADB180Volcano (Area)
A - 263 C - 86PDB180Volcano (Point)
A - 264 C - 86LAL260Wall (Line)
L - 7
Feature Name Feature Code Symbol Page Label Page
DN: 09-048 17 November 2009
A - 264 C - 86PBI050Water Intake Tower (Point)
A - 265 C - 87PAM080Water Tower (Point)
A - 266 C - 87ABH040Water Treatment Bed (Area)
A - 267 C - 88LBH180Waterfall (Line)
A - 267 C - 88PBH180Waterfall (Point)
A - 268 C - 88PAA050Well (Point)
A - 270 C - 89PAJ050Windmill (Point)
A - 272 C - 90PAJ051Windmotor (Point)
A - 274 C - 91AEC030Wood (Area)
A - 278 N/ALEC030Wood (Line)
A - 279 N/APEC030Wood (Point)
A - 279 C - 92AAK180Zoo (Area)
L - 8
Index (sorted by Feature Code)
DN: 09-048 17 November 2009
Feature Code Feature Name Symbol Page Label Page
A - 109 C - 33Extraction Mine (Area)AAA010
A - 177 C - 55Quarry (Area)AAA012
A - 83 C - 30Disposal Site (Area)AAB000
A - 208 C - 70Recycling Site (Area)AAB010
A - 174 C - 54Processing Facility (Area)AAC000
A - 236 C - 76Settling Pond (Area)AAC030
A - 171 C - 53Power Station (Area)AAD010
A - 173 C - 53Power Substation (Area)AAD030
A - 130 C - 38Heating Facility (Area)AAD050
A - 118 C - 35Fortification (Area)AAH050
A - 58 C - 22Circular Irrigation System (Area)AAJ010
A - 134 C - 39Holding Pen (Area)AAJ030
A - 10 C - 4Amusement Park (Area)AAK030
A - 47 C - 18Camp-site (Area)AAK060
A - 112 C - 33Fairground (Area)AAK090
A - 121 C - 35Golf Course (Area)AAK100
A - 162 C - 49Park (Area)AAK120
A - 245 C - 81Stadium (Area)AAK160
A - 279 C - 92Zoo (Area)AAK180
A - 207 C - 70Recreational Pier (Area)AAK190
A - 16 C - 6Archaeological Site (Area)AAL012
A - 27 C - 11Building (Area)AAL015
A - 42 C - 18Built-Up Area (Area)AAL020
A - 53 C - 21Cemetery (Area)AAL030
A - 235 C - 5Settlement (Area)AAL105
A - 163 C - 49Particle Accelerator (Area)AAL140
A - 175 C - 54Public Square (Area)AAL170
A - 228 C - 74Ruins (Area)AAL200
L - 9
Feature Code Feature Name Symbol Page Label Page
DN: 09-048 17 November 2009
A - 247 C - 81Storage Depot (Area)AAM010
A - 124 N/AGrain Storage Structure (Area)AAM020
A - 122 C - 36Grain Elevator (Area)AAM030
A - 153 C - 45Mineral Pile (Area)AAM040
A - 251 C - 83Surface Bunker (Area)AAM060
A - 248 C - 82Storage Tank (Area)AAM070
A - 204 C - 69Railway Yard (Area)AAN060
A - 176 C - 54Pumping Station (Area)AAQ116
A - 256 C - 84Transportation Station (Area)AAQ125
A - 226 C - 74Roadside Rest Area (Area)AAQ135
A - 262 C - 85Vehicle Lot (Area)AAQ140
A - 61 C - 23Communication Station (Area)AAT050
A - 137 C - 40Island (Area)ABA030
A - 254 C - 83Tidal Water (Area)ABA040
A - 17 C - 6Beach (Area)ABA050
A - 128 C - 37Harbour (Area)ABB005
A - 22 C - 9Breakwater (Area)ABB041
A - 127 C - 37Groin (Area)ABB043
A - 86 N/ADry Dock (Area)ABB090
A - 255 C - 84Training Wall (Area)ABB140
A - 19 C - 7Berthing Structure (Area)ABB190
A - 237 C - 76Slipway (Area)ABB240
A - 250 C - 82Structural Pile (Area)ABD100
A - 21 C - 8Bog (Area)ABH015
A - 48 C - 19Canal (Area)ABH020
A - 84 C - 30Ditch (Area)ABH030
A - 266 C - 87Water Treatment Bed (Area)ABH040
A - 147 C - 42Marine Farm (Area)ABH050
A - 138 C - 40Lake (Area)ABH080
L - 10
Feature Code Feature Name Symbol Page Label Page
DN: 09-048 17 November 2009
A - 140 N/ALand Subject to Inundation (Area)ABH090
A - 205 C - 69Rapids (Area)ABH120
A - 209 C - 70Reservoir (Area)ABH130
A - 210 C - 70Rice Field (Area)ABH135
A - 213 C - 72River (Area)ABH140
A - 229 C - 75Salt Evaporator (Area)ABH155
A - 229 N/ASabkha (Area)ABH160
A - 77 C - 28Dam (Area)ABI020
A - 145 C - 42Lock (Area)ABI030
A - 156 C - 46Moraine (Area)ABJ020
A - 121 N/AGlacier (Area)ABJ030
A - 240 C - 77Snow Field and/or Ice-Field (Area)ABJ100
A - 256 C - 84Tundra (Area)ABJ110
A - 241 C - 78Soil Surface Region (Area)ADA010
A - 103 C - 32Embankment (Area)ADB090
A - 120 C - 35Geothermal Outlet (Area)ADB115
A - 227 N/ARock Formation (Area)ADB160
A - 230 C - 75Sand Dunes (Area)ADB170
A - 263 C - 86Volcano (Area)ADB180
A - 2 C - 2Administrative Boundary (Line)Administrative Boundary
A - 5 C - 3Administrative Division (Area)Administrative Division
A - 70 C - 27Crop Land (Area)AEA010
A - 126 N/AGrassland (Area)AEB010
A - 253 N/AThicket (Area)AEB020
A - 50 N/ACane (Area)AEC010
A - 160 C - 48Oasis (Area)AEC020
A - 274 C - 91Wood (Area)AEC030
A - 59 C - 23Cleared Way (Area)AEC040
A - 117 N/AForest Clearing (Area)AEC060
L - 11
Feature Code Feature Name Symbol Page Label Page
DN: 09-048 17 November 2009
A - 149 N/AMarsh (Area)AED010
A - 252 N/ASwamp (Area)AED020
A - 253 C - 83Test Site (Area)AFA100
A - 6 C - 3Aerodrome (Area)AGB005
A - 10 N/AApron (Area)AGB015
A - 133 C - 39Heliport (Area)AGB035
A - 228 C - 75Runway (Area)AGB055
A - 252 N/ATaxiway (Area)AGB075
A - 152 C - 44Military Installation (Area)ASU001
A - 262 C - 85Void Collection Area (Area)AZD020
A - 71 N/ACulvert (Point)Culvert
A - 87 C - 31Elevation Contour (Line)Elevation Contour
A - 136 C - 39International Date Line (Line)International Date Line
A - 65 C - 25Conveyor (Line)LAF020
A - 179 C - 55Racetrack (Line)LAK130
A - 207 C - 70Recreational Pier (Line)LAK190
A - 112 N/AFence (Line)LAL070
A - 264 C - 86Wall (Line)LAL260
A - 182 C - 57Railway (Line)LAN010
A - 200 C - 69Railway Sidetrack (Line)LAN050
A - 51 C - 19Cart Track (Line)LAP010
A - 215 C - 73Road (Line)LAP030
A - 254 C - 83Trail (Line)LAP050
A - 24 C - 10Bridge (Line)LAQ040
A - 52 C - 20Causeway (Line)LAQ064
A - 113 C - 34Ferry Crossing (Line)LAQ070
A - 136 C - 39Ice Route (Line)LAQ075
A - 166 C - 51Pipeline (Line)LAQ113
A - 257 C - 85Tunnel (Line)LAQ130
L - 12
Feature Code Feature Name Symbol Page Label Page
DN: 09-048 17 November 2009
A - 169 C - 52Power Line (Line)LAT030
A - 45 C - 19Cableway (Line)LAT041
A - 60 C - 23Communication Line (Line)LAT060
A - 141 N/ALand Water Boundary (Line)LBA010
A - 23 C - 9Breakwater (Line)LBB041
A - 128 C - 37Groin (Line)LBB043
A - 255 C - 84Training Wall (Line)LBB140
A - 20 C - 8Berthing Structure (Line)LBB190
A - 234 N/ASeawall (Line)LBB230
A - 11 C - 5Aqueduct (Line)LBH010
A - 49 C - 19Canal (Line)LBH020
A - 85 N/ADitch (Line)LBH030
A - 116 N/AFord (Line)LBH070
A - 164 C - 50Penstock (Line)LBH110
A - 205 C - 69Rapids (Line)LBH120
A - 214 C - 72River (Line)LBH140
A - 267 C - 88Waterfall (Line)LBH180
A - 78 C - 28Dam (Line)LBI020
A - 146 C - 42Lock (Line)LBI030
A - 238 C - 76Sluice Gate (Line)LBI040
A - 134 N/AIce Cliff (Line)LBJ040
A - 247 N/ASteep Terrain Face (Line)LDB010
A - 72 N/ACut (Line)LDB070
A - 75 N/ACut Line (Line)LDB071
A - 105 C - 32Embankment (Line)LDB090
A - 119 C - 35Geologic Fault (Line)LDB110
A - 131 N/AHedgerow (Line)LEA020
A - 278 N/AWood (Line)LEC030
A - 8 C - 4Aircraft Revetment (Line)LGB050
L - 13
Feature Code Feature Name Symbol Page Label Page
DN: 09-048 17 November 2009
A - 148 C - 42Maritime Area (Line)Maritime Area
A - 110 C - 33Extraction Mine (Point)PAA010
A - 178 C - 55Quarry (Point)PAA012
A - 211 C - 71Rig (Point)PAA040
A - 268 C - 88Well (Point)PAA050
A - 174 C - 54Processing Facility (Point)PAC000
A - 51 C - 19Catalytic Cracker (Point)PAC020
A - 171 C - 53Power Station (Point)PAD010
A - 243 C - 79Solar Panel (Point)PAD020
A - 173 C - 53Power Substation (Point)PAD030
A - 130 C - 38Heating Facility (Point)PAD050
A - 239 C - 77Smokestack (Point)PAF010
A - 66 C - 26Cooling Tower (Point)PAF030
A - 68 C - 27Crane (Point)PAF040
A - 114 C - 34Flare Pipe (Point)PAF070
A - 118 N/AFortification (Point)PAH050
A - 58 C - 22Checkpoint (Point)PAH070
A - 270 C - 89Windmill (Point)PAJ050
A - 272 C - 90Windmotor (Point)PAJ051
A - 245 C - 81Stadium (Point)PAK160
A - 16 N/AArchaeological Site (Point)PAL012
A - 32 C - 14Building (Point)PAL015
A - 44 C - 18Built-Up Area (Point)PAL020
A - 47 N/ACairn (Point)PAL025
A - 55 C - 21Cemetery (Point)PAL030
A - 235 C - 75Settlement (Point)PAL105
A - 150 C - 43Memorial Monument (Point)PAL130
A - 159 C - 48Non-communication Tower (Point)PAL240
A - 124 C - 37Grain Storage Structure (Point)PAM020
L - 14
Feature Code Feature Name Symbol Page Label Page
DN: 09-048 17 November 2009
A - 122 C - 36Grain Elevator (Point)PAM030
A - 153 C - 45Mineral Pile (Point)PAM040
A - 251 C - 83Surface Bunker (Point)PAM060
A - 248 C - 82Storage Tank (Point)PAM070
A - 265 C - 87Water Tower (Point)PAM080
A - 204 N/ARailway Turntable (Point)PAN075
A - 64 C - 25Control Tower (Point)PAQ060
A - 113 C - 34Ferry Crossing (Point)PAQ070
A - 108 N/AEntrance and/or Exit (Point)PAQ090
A - 155 C - 46Mooring Mast (Point)PAQ110
A - 176 C - 54Pumping Station (Point)PAQ116
A - 256 C - 84Transportation Station (Point)PAQ125
A - 81 C - 29Dish Aerial (Point)PAT010
A - 180 C - 56Radar Station (Point)PAT045
A - 62 C - 24Communication Tower (Point)PAT080
A - 18 C - 6Beach (Point)PBA050
A - 148 C - 42Maritime Signal Station (Point)PBB155
A - 143 C - 41Lighthouse (Point)PBC050
A - 250 C - 82Structural Pile (Point)PBD100
A - 161 C - 49Offshore Platform (Point)PBD110
A - 129 C - 38Hazardous Rock (Point)PBD130
A - 15 N/AAqueduct (Point)PBH010
A - 117 N/AFord (Point)PBH070
A - 206 C - 69Rapids (Point)PBH120
A - 261 N/AVainishing Point (Point)PBH145
A - 158 C - 47Natural Pool (Point)PBH170
A - 267 C - 88Waterfall (Point)PBH180
A - 59 N/ACistern (Point)PBI010
A - 79 C - 28Dam (Point)PBI020
L - 15
Feature Code Feature Name Symbol Page Label Page
DN: 09-048 17 November 2009
A - 147 C - 42Lock (Point)PBI030
A - 238 C - 76Sluice Gate (Point)PBI040
A - 264 C - 86Water Intake Tower (Point)PBI050
A - 135 N/AIce Peak (Point)PBJ060
A - 52 C - 20Cave (Point)PDB030
A - 120 N/AGeothermal Outlet (Point)PDB115
A - 157 C - 46Mountain Pass (Point)PDB150
A - 227 N/ARock Formation (Point)PDB160
A - 263 C - 86Volcano (Point)PDB180
A - 279 N/AWood (Point)PEC030
A - 9 C - 4Airport Navigation Lights (Point)PGB010
A - 132 C - 39Helipad (Point)PGB030
A - 142 C - 41Launch Pad (Point)PGB040
A - 233 C - 75Seaplane Base (Point)PGB065
A - 7 C - 4Air Obstruction (Point)PGB220
A - 152 C - 44Military Installation (Point)PSU001
A - 157 C - 47Named Location (Point)PZD040
A - 244 C - 80Spot Elevation (Point)Spot Elevation