concept sheet Technology Analox MEC intelligent electrochemical oxygen sensor Analox 5S3 intelligent NDIR sensor Analox MEC intelligent PID sensor Analox MEC intelligent electrochemical sensor Water vapour sensor using capacitive technology Measurement Range Accuracy Oxygen 0 to 50% ±(0.035% O2 + 1% of reading + 0.15% of reading/ºC) Carbon 0 to 1000ppm ±(25ppm CO2 + 1% of reading + 1ppm CO2/ºC) dioxide VOC 0 to 100ppm ±(1ppm VOC + 5% of reading + 0.25% of reading/ºC) Carbon 0 to 20ppm ±(1ppm CO + 5% of reading + 0.1ppm CO/ºC + 0.5% of reading/ºC) monoxide Water 0 to 100mg/m 3 ±(0.15mg/m 3 H2O + 20% of reading) vapour The ACG is built upon Analox's latest innovations in sensor technology. The new range of 5S3 and MEC intelligent sensors are Analox's most compact, miniaturised range of sensors to date. Each sensor comes with its own electronics for signal processing and temperature compensation which enables each sensor to become a field replaceable item. Portable
2
Embed
Portable - Analox Military Systems STAN 59-411 Part 3 Annex B US DOD: Mil Std 464A US DoD: Mil Std 1399 Section 070 Shock and impact: MOD UK Shockrequirement are as follows;
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Oxygen 0 to 50% ±(0.035% O2 + 1% of reading + 0.15% of reading/ºC)
Carbon 0 to 1000ppm ±(25ppm CO2 + 1% of reading + 1ppm CO2/ºC)dioxide
VOC 0 to 100ppm ±(1ppm VOC + 5% of reading + 0.25% of reading/ºC)
Carbon 0 to 20ppm ±(1ppm CO + 5% of reading + 0.1ppm CO/ºC + 0.5% of reading/ºC)monoxide
Water 0 to 100mg/m3 ±(0.15mg/m3 H2O + 20% of reading)vapour
The ACG is built upon Analox'slatest innovations in sensortechnology. The new range of 5S3and MEC intelligent sensors areAnalox's most compact,miniaturised range of sensors todate. Each sensor comes with itsown electronics for signalprocessing and temperaturecompensation which enables eachsensor to become a fieldreplaceable item.
Portable
The following standards have been identified as theminimum standards that should be achieved forEMC field environment for both AC and DC powersources.
UK MOD:DEF STAN 59-411 Part 3 Annex B
US DOD:Mil Std 464A
US DoD:Mil Std 1399 Section 070
Shock and impact:MOD UK Shockrequirement are as follows;
The system is required to meet BR3021 mediumweight shock standards as per NATO STANAG4141 tested in accordance with NES814.
US Military standards:MIL STD-810G Sect 522.1
Analox has a policy of continuous improvement and we reservethe right to upgrade or change specifications without prior notice.Full technical specifications are available upon request.