-
www.touch-n-seal.com | 800-325-6180
Value and Versatility for ProfessionalAir Sealing and Insulation
ApplicationsPremium quality foam systems engineered to be the
perfect fit for any size job. For use by commercial and residential
construction professionals.
POLYURETHANEFOAM SYSTEMS
-
4
Specially developed for the professional, Touch ‘n Seal®
one-component foam systems deliver greater control and accuracy
during application, so you can air seal more efficiently. All
one-component foam systems are made in Class I fire-retardant
formulation. From gun and straw foams to cylinder-dispensed foam,
you’ll find the broadest range of products available to meet your
needs.
From commercial and residential air sealing and insulating, to
patch and fill applications, Touch ‘n Seal Foam Kits deliver a
complete self-contained disposable solution. Touch ‘n Seal foam
kits offer fast curing, so you can save time and finish your
project more efficiently. These kits are available in a variety of
densities, open or closed cell, in both standard and Class 1
fire-retardant formulas.
The CPDS™ 1000 offers the convenience of disposable chemical
cylinders with the efficiency of a bulk spray foam system. The
self-contained, portable, constant pressure spray foam system
dispenses Class I fire-retardant, open or closed cell, thermal
insulating and sound attenuating 2-component polyurethane spray
foam — twice as fast as foam kits.
one-component Foam systems
two-component Foam systems
innovative Products
The UlTimaTe in air sealing conTrol
-
No-Warp® Foam
Low pressure will not warp window • frames or door jambsExerts
up to 90% less curing • pressure than other foamsProvides
water-resistant, • airtight sealOne can seals up to 12 windows •
(36” x 60”; 3/8” gap; 1” deep)Bright white• Remains flexible and
easy to trim• Does not chalk•
Black Foam
Color blends in for RV and • landscaping jobsUV inhibitors
eliminate the need • for painting or coveringSeals out insects,
rodents, • moisture, dust and noise Contains fire-retardant•
Gun Foam II
Approved fireblock penetration • sealantType V residential
fireblock• ICC ESR-1926 Approved • FireblockASTM E-814 and UL-1715
• testedEasy-to-identify • orange colorAvailable in 24 oz. • and
30.5 oz.
All Seasons
Performs in wide range • of temperatures as low as 20°F (-7°C)
and as high as 120°F (49°C)Low curing pressure • - can be used
around windows & doors Increases efficiency of • HVAC
systemsContains fire-retardant •
Proud Member
___________
1201101009080706050403020
onE-comPonEnt Foam sYstEms
www.touch-n-seal.com 800.325.6180
1 2
3
4
14
5
67
9
10
11
12
13
8
Touch ’n Seal polyurethane foam
systems seal cracks and crevices that
lead to energy loss. Areas to consider:
1 Plumbing stack vent
2 Attic hatches
3 Light fixtures
4 Electrical outlets
5 Gaps/cracks around doors
6 Foundation walls
7 Dryer vents
8 Holes in housewrap/vapor barrier
9 Sill plate/band joist
10 Gaps/cracks around windows
11 Entry points for electrical, cable TV and telephone
12 Bathroom fan vent
13 Chimney penetrations
14 Flash & Batt applications
-
8
Quick Cure Canisters
Easy portablility for larger jobs• Available in Winter (HY) or
Summer (RX) • formulaAvailable in 10# and 16# complete • with 10
ft. hose and wand assembly or as replacement tanks onlyContains
fire retardant• No HCFC’s or urea formaldehyde•
Panel Bond
Construction adhesive• Excellent shear strength• Bridges uneven
surfaces, reduces • flooring squeaksFor use with wood or clean
metal studs•
Quick Cure Straw Foam
Straw and adaptor included – no gun needed• Can be partially
used, stored and re-started later• Class 1 foam• No CFC’s, No
HCFC’s• ICC ESR-1926 Approved Fireblock•
Liner Bond – Trailer Fiberglass Liner Adhesive
Bonds fiberglass liners to spray foam insulation and aluminum
studs.
Fast and easy spray gun application, contains • no harmful
solvents5X stronger than other foam adhesives• Insulates and seals
all cracks and cavities• 30 minute tack time for proper liner
placement• Fast cure reduces trailer downtime• Non-flammable, safe
to use•
adHEsiVEs
-
Sharpshooter–D
• Economical, disposable gun
• Adjustable output
Sharpshooter–X
• Reusable
• Adjustable output
• Coated non-stick basket
• Metal barrel
Sharpshooter–XP
• Comfort molded handle for extended use
• Reusable
• Adjustable output
• Coated non-stick basket
• Metal barrel
Bottom Load Gun
• Fits single-component cylinders• Metal barrel• Comfortable
handle
Long Barrel Gun
• Provides extended reach
• Available in 28” or 39” length• Adjustable output
• Reusable
Tip Extensions for Foam Applicator Guns
• For hard to reach areas
• Increases maneuverability
• Protects the gun tip
Brass extensions
Poly-Clean
Cleans wet foam from hands, tools and • applicator guns
Attaches directly to gun basket to flush barrel•
Nozzle allows spray directly from can•
Specially developed for use with Touch ’n Seal gun foam
products, sharpshooter Foam applicators have a model for every
budget — disposable, reusable, and premium. Brass extension tips
can be added to extend reach and improve maneuverability in tight
spaces. Long barrel guns add greater reach – up to 39 inches. With
comfortable handles, precision accuracy and adjustable output,
Sharpshooter foam applicators have the professional foam applicator
covered no matter what size the job.
Sharpshooter Applicator Guns
accEssoriEs & sPEcialtY Products
www.touch-n-seal.com 800.325.6180
-
12
Additional Foam Kit features include:Pre-connected hoses for
fast, easy set-up (15, 120, 200 • and 300 Kits)
Foam expands 30 times, dries in less than one minute•
• Rip ’n Go® set-up provides easy access to new, comfort-grip
handle (120, 200 and 300 Kits)
No CFC’s•
Clear, color-coded hoses•
Touch ’n Seal® Foam Kits are designed for commercial,
industrial, manufacturing and residential sealing, insulating,
patching and filling applications. Portable and disposable, these
two-component foam systems provide a quick, consistent flow of
polyurethane foam with rapid curing, dries tack-free in seconds,
and is fully cured in one hour.
two-comPonEnt Foam sYstEms
DisPosaBle sYsTems
Available Foam Density
1.0 PCF FR 1.75 PCF 1.75 PCF FR 3.0 PCF
3 3 3 3
✓ Open or Closed Cell Class I fire retardant foam available
✓ Total portability and flexibility✓ All necessary components
included✓ Environmentally safe & disposable
Foam Kit Advantages:
www.touch-n-seal.com 800.325.6180
-
Patent Pending
The cPDs™ 1000 is a self-contained, portable, constant spray
foam dispensing system that uses compressed air to deliver higher
foam yield, twice as fast as foam kits. Minimal investment and
training can lead to an ideal opportunity for business start-up or
service expansion. With less trash, less chemical waste, disposable
containers, and no ozone depleting chemicals, you can feel good
about your impact on the environment and your budget.
Additional features include:Low cost to own, operate and
maintain•
Uses CP750 FR (closed cell) and CP1200 FR (open cell) • Class 1
Fire-Retardant foam
Ideal for business start-up or service expansion•
High profit center, low maintenance•
Eliminates the need for bulk systems in mid-sized projects•
Economical – lower cost per board foot than kits•
Open or closed cell foam•
innoVaTion ThaT WorKs For YoU
The convenience of a disposable kit & the efficiency of a
bulk system.
CPDS 1000 Included Items
CPDS 1000 – complete
30’ hose; foam applicator; on/off valves; tank to hose and hose
to foam applicator - fully assembled
Polyclean (1 can)
Nozzle Kit – clear conical (25 pack)
Nozzle Kit – yellow fan (25 pack)
Extra Foam Applicator with 12” hose
2 Wrenches – 9/16” & adjustable
Operation Manuals and Operational DVD
✓ Spraying with hoses up to 150’ long✓ Minimized chemical waste
and improved application rate/yield
✓ Consistent, controllable foam flow
Innovative chemical delivery system allows:
✓ Cart design is easily maneuverable✓ Eliminates need to carry
foam kits into attics and crawlspaces
✓ Sprays twice as fast as foam kits
Labor savings attributes:
✓ Spraying with hoses up to 150’ long✓ Minimized chemical waste
and improved application rate/yield
✓ Consistent, controllable foam flow
Innovative chemical delivery system allows:
✓ Cart design is easily maneuverable✓ Eliminates need to carry
foam kits into attics and crawlspaces
✓ Sprays twice as fast as foam kits
Labor savings attributes:
Available Foam Density
1.0 PCF FR 1.75 PCF 1.75 PCF FR 3.0 PCF
3 — 3 —
www.touch-n-seal.com 800.325.6180
-
10
Touch ’n Seal® Refill Systems are Class 1, fire retardant, spray
polyurethane foam dispensing systems for large volume users. Each
system consists of “A” and “B” chemical tanks, chemical filters,
inline on/off valves, high-pressure regulator, hoses and
applicator. The system requires dry nitrogen for chemical tank
pressurization and is not supplied with the system.
Patented Anti-Crossover Applicator GunFoam output up to 5.5 lbs.
per minute•
Controllable metering rate•
Lightweight, sturdy construction•
Low replacement cost •
Minimal maintenance•
Single applicator operation•
Reusable•
Available Foam Density
1.0 PCF FR 1.75 PCF 1.75 PCF FR 3.0 PCF
— — 3 —
rEFill sYstEms
large VolUme User solUTions
✓ Suitable for new construction, retrofit & transportation
industries
✓ Open and Closed Cell Class I fire retardant foam
✓ Lower investment, returnable system
Refill Systems Advantages:
Additional Refill System features include:Provides air sealing,
thermal and sound insulation•
Ideal for full cavity filling and “flash & batt”
applications•
Enhances structural integrity•
Available in 3 sizes to better suit your needs•
www.touch-n-seal.com 800.325.6180
-
Touch ‘n Seal heating systems for cold weather SPF applications.
• Achieve highest quality foam in colder conditions• Maintain
proper chemical temperature
HEating sYstEms
For use with existing 30’ chemical hose sets•
Preset temperature control cycles at 75°-• 95°F (24°-35°C)
Velcro closure allows easy installation and • removal
Overall length is 27’ (covers hose from • strain relief to ball
valves at the applicator)
120 volts, 150 watts•
Self regulating temperature control•
Blanket heaters available for 17 & 60 • gallon cylinders
Maintains temperature at 80°-90°F • (27°-32°C)
120 volts, 280 watts for 17 gallon; 120 • volts, 548 watts for
60 gallon
Self-regulating temperature control•
Blanket heater for disposable foam kits•
Maintains temperature at 80°-90°F • (27°-32°C)
120 volts, 95 watts•
Self-regulating temperature control•
For 600, 750 and 1200 cylinders•
For use with CPDS• ™ 1000 Cover
120 volts, 500 watts forced air•
Preset temperature control cycles at 70°-• 90°F (21°-32°C)
Mounts to bottom of CPDS 1000 (available for • retrofit)
Can be used at setup or for overnight storage•
Easy to install•
Primary hose set - 50’ length (includes • two 50’ primary hoses,
controller, chemical temperature gauges (2), shutoff valves (4) and
spray foam applicator)
50’ extensions can be added to a • maximum length of 150’
120 volts, 500 watts per 50’ section•
Electronic adjustable temperature control•
Chemical temperature monitoring gauges•
Use with Forced Air Heating Unit to • warm entire system
Custom, heavy duty, weatherproof one • piece cover
Holds in heat, keeps out weather•
Front window, front and rear zipper • access to all controls,
hold down straps, fold up skirt for transporting with zippered
control panel access
Heater band available for 17 gallon • cylinders
Adjustable temperature control•
120 volts, 500 watts•
Hose Warming Wrap
Warming Blanket – Refillables
Warming Blanket – 12” Cylinder
CPDS™ 1000 Cover
Heater Band
Forced Air Heating Unit
Heated Hose System and Heated Hose Extensions
THE HEAT IS ON!THE HEAT IS ON!
Item Description CPDS™ 17 & 60 GALLON Part # Quantity Usage
1000 REFILL SYSTEMS
Warming Blanket – 17 Gal Refillable X 4505100115 1 per chemical
cylinder
Warming Blanket – 60 Gal Refillable X 4505100125 1 per chemical
cylinder
Heater Band (w/controls) – 17 Gal Refillable X 4505100060 1 per
chemical cylinder
Heated Hose System – Primary 50' – Refillables X 4505100100 1
set contains both "A" & "B" hoses, controller, temperature
gauges (2), shutoff valves (4) and spray foam applicator
Heated Hose – Extension 50' – Refillables X 4505100105 1 set
contains both "A" & "B" hoses and couplers
Warming Blanket – 12" Cylinder X 4505500115 1 per chemical
cylinder
Hose Warming Wrap – 27 ft. – CPDS 1000 X 4505500100 1 covers
both "A" & "B" hoses of a 30' hose set
CPDS 1000 Cover – CPDS 1000 X 4505500105 1 per CPDS 1000
Forced Air Heating Unit – CPDS 1000 X 4505500110 1 per CPDS
1000
Touch ‘n Seal Heating Systems and Accessories
NEW
NEWNEW
NEW
NEW NEW
-
6
* All Touch ‘n Seal yields are calculated according to ASTM
C-1536. Theoretical yield is used as an industry standard to
represent the size of two-component foam kits. The calculation is
based on ideal conditions, does not include blowing agent loss, and
may vary according to application method or environmental
factors.** Full unit of R-Value = hr•ft2•F/Btu
Product sizeYield (linear ft.)*
density r-Value shelf life (months)Flame spread
smoke developed
1/4” bead 3/8” bead
All-Seasons Gun Foam4004529812
24 oz. 2200 1000 1.9 ± .10 7.12 12 5 10
Black Gun Foam4004529813
24 oz. 3200 1420 1.2 - 1.8 4.5 12 15 25
Gun Foam II4004528712
24 oz. 2096 922 1.3 - 1.8 7.12 12 15 25
Gun Foam II4004529830
30.5 oz. 2096 922 1.3 - 1.8 7.12 12 15 25
No-Warp Gun Foam4004529712
20 oz. 2096 922 1.3 - 1.8 7.12 12 10 15
Panel Bond Foam Adhesive4004532412
24 oz. 750 (1/2” bead) 1.2 - 1.8 5.4 12 10 10
Quick Cure Straw Foam4004521212
12 oz. 918 408 1.75+ / -.25 4.9 12 10 15
Quick Cure Straw Foam4004521224
24 oz. 1805 818 1.75+ / -.25 4 - 5 12 10 15
Liner Bond4004517100 - Complete
4004517101 - Replacement23 lb. 275 sq. ft. N/A N/A 12 N/A
N/A
Quick cure cylinders
10# HY4004518100 - Complete
4004518101 - Replacement10# 15300 6800 1.3 - 1.8 4 - 5 12 20
25
16# HY4004518160 - Complete
4004518161 - Replacement16# 24400 10900 1.3 - 1.8 4 - 5 12 20
25
10# RX4004510950 - Complete
4004510951 - Replacement10# 14700 6500 1.3 - 1.8 4 - 5 12 20
25
16# RX4004516900 - Complete
4004516901 - Replacement16# 24000 10500 1.3 - 1.8 4 - 5 12 20
25
www.touch-n-seal.com 800.325.6180
onE-comPonEnt Foam sPEciFications
-
oPEn cEll closEd cEll
FK 300FK 1000
cP 1200 Fr
FK 200 FrFK 600 FrcP 750 Fr
rF 17 gallonrF 60 gallonrF 120 gallon
FK 15FK 110FK 200FK 600
FK 120
1.0 PcF Fr 1.75 PcF Fr 1.75 PcF non-Fr 3.0 High density
Shelf Life 1 year; unopened container 1 year; unopened container
1 year; unopened container 1 year; unopened container
Dry Time / Tack-free Time 30 - 60 seconds 30 - 60 seconds 30 -
60 seconds 30 - 60 seconds
Fully Cured Approximately 1 hour Approximately 1 hour
Approximately 1 hour Approximately 1 hour
Cuttable 2 - 5 minutes 2 - 5 minutes 2 - 5 minutes 2 - 5
minutes
ASTM G21 Fungi Resistance Does not support growth Does not
support growth Does not support growth Does not support growth
ASTM E84 Surface Burning Characteristics @ 2” (51mm)
Flame SpreadSmoke Developed
25145
15250
N/AN/A
N/AN/A
ASTM E96 Water Vapor Transmission
5.4 perms @ 1 in. (25 mm) 2.80 perms @ 1 in. (25 mm) 3.0 perms @
1 in. (25 mm) N/A
ASTM E 283 Air Permeance0.003 ft3/min./ft2 @ 25mph (40kph) 0.008
ft3/min./ft2 @ 50mph (80kph)
< 0.01 ft3/sec/ft2 (< 0.05 L/s/m2) < 0.01 ft3/sec/ft2
(< 0.05 L/s/m2) N/A
ASTM C518 R-Value – Initial 4.0/in. (25 mm) 7.12/in. (25 mm)
7.12/in. (25 mm) 5.9/in. (25 mm)
ASTM D1621 Compressive Strength N/A 13.1 lbs./in2 (0.92 kgf/cm2)
7.6 lbs./in2 (0.53 kgf/cm2) 40 lbs./in2
ASTM D1622 Density 1.0 - 1.25 pcf/f3 (16.0 - 20.0 kg/m3) 1.75 ±
.1 pcf (28.03 ± 1.60 kg/m3) 1.75 ± .1 pcf (28.03 ± 1.60 kg/m3) 3.0
lbs/ft3 (40.1 kg/m3)
ASTM 1623 Tensile Strength N/A 38.23 psi (2.69 kgf/cm2) 30.84
psc (20.17 kg/cm2) N/A
ASTM D2126 Thermal and Humid Aging – Dimensional Stability
-40°F (-40°C) 2 weeks
158°F (70°C) 2 weeks
Combined -40°F (-40°C) 2 weeks & 158°F (70°C) 2 weeks
N/A
Linear Mass Linear Mass
N/A0.05%
1.90%
1.85%
0.10%
-2.95%
-2.85%
0.10%
-2.10%
-2.00%
0.15%
-3.95%
-3.80%
ASTM D6226 Closed Cell Content < 10% > 90% > 85%
>85%
ASTM D6226 Open Cell Content > 90% < 10% < 15% <
10%
International Residential Code Compliant Compliant Compliant
N/A
California Bureau of Home Furnishings and Insulation
Listed Listed Listed N/A
two-comPonEnt Foam sPEciFications
www.touch-n-seal.com 800.325.6180
-
52016-010810-TNS
Product listingItem # Description Size Case Qty Pallet Qty
ONE COMPONENT STRAW & GUN FOAM
4001230111 Reddy General Purpose 11 oz 12 108
4004521212 Quick Cure Straw Foam 12 oz 12 108
4004521224 Quick Cure Straw Foam 24 oz 12 72
4004529712 No Warp Gun Foam 20 oz 12 72
4004528712 Gun Foam II “Fireblock” Foam 12 oz 12 72
4004529830 Gun Foam II “Fireblock” Foam 30.5 oz 12 72
4004529812 All-Seasons Gun Foam 24 oz 12 72
4004529813 Black Gun Foam 24 oz 12 72
ONE COMPONENT CYLINDERS
4004518100 Quick Cure HY 10 lb Complete 10 lb 1 ea 90
4004518160 Quick Cure HY 16 lb Complete 16 lb 1 ea 50
4004518101 Quick Cure HY 10 lb Replacement 10 lb 1 ea 90
4004518161 Quick Cure HY 16 lb Replacement 16 lb 1 ea 50
4004510950 Quick Cure RX 10 lb Complete 10 lb 1 ea 90
4004516900 Quick Cure RX 16 lb Complete 16 lb 1 ea 50
4004510951 Quick Cure RX 10 lb Replacement 10 lb 1 ea 90
4004516901 Quick Cure RX 16 lb Replacement 16 lb 1 ea 50
4004517100 Liner Bond 23 lb Complete 23 lb 1 ea 50
4004517101 Liner Bond 23 lb Replacement 23 lb 1 ea 50
TWO COMPONENT FOAM
4004520015 Foam Kit 15 (1.75 PCF) - 12 24
4004520110 Foam Kit 110 Complete (1.75 PCF) - 1 ea 36
4004523120 Foam Kit 120 Complete (3.0 PCF) - 1 ea 36
4004520200 Foam Kit 200 Complete (1.75 PCF) - 1 ea 36
4004001200 Foam Kit 200 FR Complete (1.75 PCF) - 1 ea 36
4004520600 Foam Kit 600 Complete (1.75 PCF) - 1 ea 16
4004520601 Foam Kit 600 Replacement (1.75 PCF) - 1 ea 16
4004521600 Foam Kit 600 FR Complete (1.75 PCF) - 1 ea 16
4004521601 Foam Kit 600 FR Replacement (1.75 PCF) - 1 ea 16
TWO COMPONENT CPDS FOAM
4505500750 Foam Kit CP-750 FR (1.75 PCF) (A & B Chemicals
only) - 1 ea 12
4505501200 Foam Kit CP-1200 FR (1.0 PCF) (A & B Chemicals
only) - 1 ea 12
TWO COMPONENT REFILL SYSTEM FOAM
4505100000 RF-17 Standard (1.75 PCF) - 1 set
4505160000 RF-60 Standard (1.75 PCF) - 1 set
4505112000 RF-120 Standard (1.75 PCF) - 1 set
TWO COMPONENT LOW DENSITY FOAM
4004520300 Foam Kit 300 Complete (15’ hose) (1.0 PCF) - 1 ea
36
4004520301 Foam Kit 300 Replacement (1.0 PCF) - 1 ea 36
4004521000 Foam Kit 1000 Complete (30’ hose) (1.0 PCF) - 1 ea
16
4004521001 Foam Kit 1000 Replacement (1.0 PCF) - 1 ea 16
SPECIALTY PRODUCTS
4004712022 Poly-Clean Foam Cleaner 12 oz 12 108
4004532412 Panel Bond Foam Adhesive 24 oz 12 72
Item # Description Size Case Qty Pallet Qty
FOAM APPLICATOR GUNS
4004590325 Spray Foam Applicator w/15’ hose/accessories - 1 ea
-
4004590335 Spray Foam Applicator w/30’ hose/accessories
(standard accessory pack contains: 8 conical nozzles, 2 fan
nozzles, 1 wrench, 1 lube, 2 latex gloves)
- 1 ea -
4505100012 Spray Foam Applicator w/12” hose outs (CPDS &
Refillables)
- 1 ea -
4505500030 CPDS 1000 Spray Foam Applicator w/30’ hose (assembled
w/on/off valves to tanks and foam applicator)
- 1 ea -
4004510600 Sharpshooter D Gun Foam Applicator - 1 ea -
4004510604 Sharpshooter D Gun Foam Applicator (6 Pack) - 6 ea
-
4004510608 Sharpshooter X Gun Foam Applicator - 1 ea -
4004516680 Sharpshooter XP Premium Gun Foam Applicator - 1 ea
-
4004510028 28” Long Barrel Gun Foam Applicator - 1 ea -
4004510639 39” Long Barrel Gun Foam Applicator - 1 ea -
4004510629 One Component Bottom Load Foam Applicator - 1 ea
-
ACCESSORIES
4004529930 Nozzle Kit Clear (2X) Conical (All Two Component
foams) - 25 ea -
4004529940 Nozzle Kit Yellow (2X) Fan (All Two Component foams)
- 25 ea -
4004529968 Nozzle Kit Black (2X) Injection (All Two Component
foams) - 25 ea -
4505100080 Nozzle Kit Calibration Nozzle (Refillables) - 25 ea
-
4004590691 Nozzle Pack for Foam Kit 15 - 30 ea -
4004529952 Gun Tip Extensions w/Brass Tube - 25 ea -
4004520006 On/Off Valve – 2 Component (Tank-to-Hose) (CPDS) - 2
ea -
4505100025 Tank Filter Assembly (Refillables) - 2 ea -
4505100040 On/Off Valve – (Tank-to-Hose) (Refillables) - 2 ea
-
4505100045 30’ Hose Set (w/2 Hose-to-Hose couplers) (CPDS &
Refillables)
- 2 ea -
4505100035 Spray Foam Applicator w/60’ Hose Kit (2 couplers, 2
On/Off Tank-to-Hose valves, 2 in-line Hose-to-Gun valves) (CPDS
& Refillables)
- 1 ea -
4505100055 10’ Hose – Nitrogen Lines (Refillables) - 2 ea -
4505500055 CPDS 1000 System - 1 ea -
4505100050 In-line On/Off Valve – Hose-to-Applicator Spray Foam
Gun (Refill/CPDS)
- 2 ea -
4505100065 High Pressure Regulator – Nitrogen (Refillables) - 1
ea -
4505100075 150’ Hose Set (CPDS & Refillables) - 2 ea -
4001593315 10” Wand Dispensing Kit – (10” wand applicator &
10’ gray hose) (One-Component Cylinders)
- 1 ea -
TEMPERATURE CONTROL / WARMING ACCESSORIES
4505100060 Heater Band (w/controls) – 17 Gallon Refill - 1 ea
-
4505100100 Heated Hose System – (50’ primary hose set, temp
gauges, On/Off valves, controller & spray foam applicator w/12”
hoses) (Refillables Only)
- 1 ea -
4505100105 Heated Hose Extension – 50’ hose set (Refillables) -
1 ea -
4505100110 Controller – Heated Hose (Refillables) - 1 ea -
4505100085 Temperature Gauge Assembly (Refillables) - 1 ea -
4505500100 Hose Warming Wrap – 27’ (both hoses) (CPDS &
Refillables) - 1 ea -
4505500115 Warming Blanket – 12” Cylinders (600, 750, 1000,
1200) - 1 ea -
4505500105 CPDS 1000 Cover - 1 ea -
4505500110 CPDS 1000 Forced Air Heating Unit - 1 ea -
4505100115 Warming Blanket – 17 Gal. Refillable - 1 ea -
4505100125 Warming Blanket – 60 Gal. Refillable - 1 ea -
www.touch-n-seal.com 800.325.6180
Convenience Products866 Horan Drive, Fenton, MO 63026-2416
USA1-800-325-6180 • www.touch-n-seal.com