POLYALKYLENE GLYCOLS BASED STOCK

ROKOLUB™

POLYALKYLENE GLYCOLS BASED STOCKSynthetic fluids with unique properties

BASE STOCKS FOR LUBRICANTS AND COMPONENTS FOR INDUSTRIAL FLUIDS

2 For more information, please contact: [email protected]

ROKOLUB™ - Polyalkylene Glycols Based StockGeneral information The Rokolub product series features synthetic base stock components and additives dedicated to formulators with a strong focus on developing new products meeting the highest market expectations and demands. Their excellent properties such as lubricity, wear and extreme pressure characteristics along with a high viscosity index, low pour point, clean burning – sludge control make them perfect for various lubricant applications. Rokolub polyalkylene glycols are ethylene (EO) and propylene (PO) oxide based random polymers. The unique properties are a result of a chemical structure of a molecule. Each series is characterized by EO/PO ratio and a use of an alcohol initiator.

Unique Properties & Applications

The Rokolub product family includesRokolub 50-B series

Rokolub P-B series

Rokolub 60-D series

Rokolub water insoluble/ partially soluble series

• equal weight amount of ethylene and propylene oxide, molecules are finished with one terminal hydroxyl group. Rokolub 50-B series is a group of water soluble products. The number at the end of the name stands for viscosity in 40 deg (Table 2).

• molecules contain only propylene oxide and are finished with one terminal hydroxyl group. Rokolub P-B series is a group of water insoluble products. The number at the end of the name stands for viscosity in 40 deg (Table 3).

• 60 weight percent of ethylene and 40 weight percent of propylene oxide, molecules are finished with two terminal hydroxyl groups. Rokolub 60-D series is a group of water soluble products. The number at the end of the name stands for viscosity in 40 deg (Table 2).

• the number in the name stands for VG. This group of pro-ducts is characterized by different EO:PO ratio and has usu-ally two or three terminal hydroxyl groups (Table 4).

Polyalkylene glycols type base stock show unique properties as compared to other base stock petroleum derivatives, group I – III (Mineral Oil) and also better results in comparison with group IV (PAO).

Table 1. Group I-V base stocks properties comparison

FEATURES MINERAL OILS PAO SYNTHETIC PAG

Viscosity wide range Poor Very Good Excellent

Viscosity Index Poor Very Good Excellent

Low Temperature Poor Very Good Very Good

Lubricity (AW/EP properties ) Poor Good Very Good

Additive Solubility Poor Very Good Very Good

Cleanliness, no sludge formation Poor Good Excellent

Oxidative/thermal stability Poor Good Very good

Rokolub products are available in ISO viscosity range from 20 to 1000 and viscosity index (VI) mostly above 200. Typical appli-cations for Rokolub base stock products are shown in Table 5.

ROKOLUB TM - POLYALKYLENE GLYCOLS BASED STOCK

3

Customized products and a new product development Due to our over 40 years of polyether polyol manufacturing experience, we are able to offer customized solutions as well as new products meeting all formulations and market demands. It is because of our production flexibility that we are able to synthesize products with a wide range of EO/PO ratio and a different initiator usage. Company’s resources allow us to obtain products that meet client’s exact physico-chemical requirements e.g.: viscosity, molecular weight, pour point, cloud point, solubility.

AdditivesAny antioxidants (AoX) additives used in Rokolub base stock series are applied mainly for storage use. Most of antioxi-dants used are phenolic derivatives.

Packaging Tank wagons or tanker trucks made of stainless steel, plastic containers with a capacity of 1m3, steel or plastic drums with a capacity of 200 dm3 and other packaging earlier agreed with the customer.

Storage conditionsStore in sealed containers, in cool, dry places. Maximum stor-age temperature +40°C. Recommended usage temperature 20-25°C. Viscosity increases as temperature decreases.

Shelf life To reach the maximum shelf life of 2 years before re-test, store in proper conditions.

TransportLimitations resulting from ADR, RID, IMDG and IATA regula-tions do not apply.

Hazard symbolNot classified as a hazardous chemical substance.

Other Rokolubs are polymers pursuant to Regulation (EC) No. 1907/2006 REACH (Article 3(5)). Polymers are exempted from the provisions on registration of Title II of REACH (Article 2(9)). All monomers and other substances used in a production of the above-mentioned polyol have been/ will be registered by our supplier.

BASE STOCKS FOR LUBRICANTS AND COMPONENTS FOR INDUSTRIAL FLUIDS

4

ROKOLUB TM - POLYALKYLENE GLYCOLS BASED STOCK

Water soluble PAG – Properties*

PRODUCTNAME

MO

LECU

LAR

WEI

GH

TM

w [g

/mol

]

KIN

EMAT

IC V

ISCO

SITY

at

40º

C [c

ST]

KIN

EMAT

IC V

ISCO

SITY

at

100

ºC [c

ST]

ISO

VIS

COSI

TY G

RAD

E

VISC

OSI

TY IN

DEX

FLA

SH P

OIN

T [º

C]

AST

M D

92

CLO

UD

PO

INT

[ºC]

[1 %

AQ

]

POU

R PO

INT

[ºC]

AST

M D

97

DEN

SITY

[g

/cm

3 ] in

20o C

DIN

517

57

FRIC

TIO

N C

OEF

FICI

ENT

AST

M D

2783

-03

MA

X.N

OSE

IZU

RE L

OA

D[N

] A

STM

D27

83-0

3

WEA

R SC

AR

[mm

]A

STM

D27

83-0

3

SEIZ

URE

LO

AD

[N

] A

STM

D27

83-0

3

MA

X. F

RIC

TIO

N

COEF

FICI

ENT

AST

M D

2783

-03

WEA

R SC

AR

[MM

]A

STM

D41

72-9

4

NOTE 1 NOTE 2

Rokolub 50-B-20 750 21 5 22 180 188 79 -40 1.020 0.05 378 0.31 784 0.62 1.10

Rokolub 50-B-46 1324 52 11 46 211 247 64 -38 1.040 0.05 618 0.38 1569 0.39 1.10

Rokolub 50-B-100 1800 95 17 100 218 250 59 -40 1.041 0.05 618 0.36 1236 0.30 1.22

Rokolub 50-B-120

Rokolub 50-B-150 2796 153 30 150 234 257 56 -43 1.049 0.04 784 0.38 1236 0.50 1.26

Rokolub 60-D-220 2350 230 42 220 238 230 86 -38 1.070 0.04 784 0.39 1236 0.40 1.00

Rokolub 60-D-320 (Blended) 315 56 320 246 241 80 -35 0.03 981 0.41 1236 0.20 1.05

Rokolub 60-D-460 4936 470 79 460 251 253 73 -33 1.074 0.04 981 0.41 1569 0.21 1.06

Rokolub 60-D-1000 6575 900 135 1000 270 260 69 -28 1.070 0.04 981 0.42 1569 0.25 1.02

Table 2. Water soluble Rokolub properties – EO/PO random copolymers

Note 1: Molecular weight was determinated by gel permeation chromatography.Note 2: Determinated by oscillation of a steel ball on a steel ball at 75ºC and 392 N. * Table contents typical properties, not be treated as specification.

5

PRODUCTNAME

MO

LECU

LAR

WEI

GH

TM

w [g

/mol

]

KIN

EMAT

IC V

ISCO

SITY

at

40º

C [c

ST]

KIN

EMAT

IC V

ISCO

SITY

at

100

ºC [c

ST]

ISO

VIS

COSI

TY G

RAD

E

VISC

OSI

TY IN

DEX

FLA

SH P

OIN

T [º

C]

AST

M D

92

CLO

UD

PO

INT

[ºC]

[1 %

AQ

]

POU

R PO

INT

[ºC]

AST

M D

97

DEN

SITY

[g

/cm

3 ] in

20o C

DIN

517

57

FRIC

TIO

N C

OEF

FICI

ENT

AST

M D

2783

-03

MA

X.N

OSE

IZU

RE L

OA

D[N

] A

STM

D27

83-0

3

WEA

R SC

AR

[mm

]A

STM

D27

83-0

3

SEIZ

URE

LO

AD

[N

] A

STM

D27

83-0

3

MA

X. F

RIC

TIO

N

COEF

FICI

ENT

AST

M D

2783

-03

WEA

R SC

AR

[MM

]A

STM

D41

72-9

4

NOTE 1 NOTE 2

Rokolub 50-B-20 750 21 5 22 180 188 79 -40 1.020 0.05 378 0.31 784 0.62 1.10

Rokolub 50-B-46 1324 52 11 46 211 247 64 -38 1.040 0.05 618 0.38 1569 0.39 1.10

Rokolub 50-B-100 1800 95 17 100 218 250 59 -40 1.041 0.05 618 0.36 1236 0.30 1.22

Rokolub 50-B-120

Rokolub 50-B-150 2796 153 30 150 234 257 56 -43 1.049 0.04 784 0.38 1236 0.50 1.26

Rokolub 60-D-220 2350 230 42 220 238 230 86 -38 1.070 0.04 784 0.39 1236 0.40 1.00

Rokolub 60-D-320 (Blended) 315 56 320 246 241 80 -35 0.03 981 0.41 1236 0.20 1.05

Rokolub 60-D-460 4936 470 79 460 251 253 73 -33 1.074 0.04 981 0.41 1569 0.21 1.06

Rokolub 60-D-1000 6575 900 135 1000 270 260 69 -28 1.070 0.04 981 0.42 1569 0.25 1.02

Table 2. Water soluble Rokolub properties – EO/PO random copolymers


BASE STOCKS FOR LUBRICANTS AND COMPONENTS FOR INDUSTRIAL FLUIDS ROKOLUB TM - POLYALKYLENE GLYCOLS BASED STOCK

6 For more information, please contact: [email protected]

Water partially soluble PAG – Properties*

PRODUCTNAME

MO

LECU

LAR

WEI

GH

T

Mw

[g/m

ol]

KIN

EMAT

IC V

ISCO

SITY

at

40º

C [c

ST]

KIN

EMAT

IC V

ISCO

SITY

at

100

ºC [c

ST]

ISO

VIS

COSI

TY G

RAD

E

VISC

OSI

TY IN

DEX

FLA

SH P

OIN

T [º

C]

AST

M D

92

POU

R PO

INT

[ºC]

AST

M D

97

DEN

SITY

[g

/cm

3 ] in

20o C

DIN

517

57

FRIC

TIO

N C

OEF

FICI

ENT

AST

M D

2783

-03

MA

X.N

OSE

IZU

RE L

OA

D[N

] A

STM

D27

83-0

3

WEA

R SC

AR

[mm

]A

STM

D27

83-0

3

SEIZ

URE

LO

AD

[N

] A

STM

D27

83-0

3

MA

X. F

RIC

TIO

N

COEF

FICI

ENT

AST

M D

2783

-03

WEA

R SC

AR

[MM

]A

STM

D41

72-9

4

NOTE 1 NOTE 2

Rokolub 32 674 33 5 32 22 >220 -40 1.073 0.06 392 0.32 784 0.2 1.26

Rokolub 68 1020 66 11 68 147 >200 -36 1.007 0.06 490 0.38 981 0.1 1.10

Rokolub100 436 95 11 100 100 <230 -31 1.075 0.05 490 0.35 784 0.1 1.12

Rokolub 150 2050 151 22 150 173 200 -34 1.004 0.05 490 0.32 981 0.1 1.46

Rokolub 220 220 36 220 211 210 -35 0.998 0.05 490 0.37 981 0.1

Rokolub 220 VI 3620 260 39 320 194 >250 -30 1.022 0.05 618 0.35 981 0.1 1.17

Rokolub 320 F 2720 270 47 320 235 >260 -20 1.084 0.03 981 0.41 1236 0.3 1.05

Rokolub 460 6085 466 79 460 241 0.04 784 0.38 1236 0.2 1.18

Rokolub 680 5330 600 104 680 268 >250 -7 1.095 0.03 1236 0.50 1569 N/d** 0.97

Table 3. Water partialy soluble Rokolubs properties – EO/PO random copolymer


**Not determinated

7

PRODUCTNAME

MO

LECU

LAR

WEI

GH

T

Mw

[g/m

ol]

KIN

EMAT

IC V

ISCO

SITY

at

40º

C [c

ST]

KIN

EMAT

IC V

ISCO

SITY

at

100

ºC [c

ST]

ISO

VIS

COSI

TY G

RAD

E

VISC

OSI

TY IN

DEX

FLA

SH P

OIN

T [º

C]

AST

M D

92

POU

R PO

INT

[ºC]

AST

M D

97

DEN

SITY

[g

/cm

3 ] in

20o C

DIN

517

57

FRIC

TIO

N C

OEF

FICI

ENT

AST

M D

2783

-03

MA

X.N

OSE

IZU

RE L

OA

D[N

] A

STM

D27

83-0

3

WEA

R SC

AR

[mm

]A

STM

D27

83-0

3

SEIZ

URE

LO

AD

[N

] A

STM

D27

83-0

3

MA

X. F

RIC

TIO

N

COEF

FICI

ENT

AST

M D

2783

-03

WEA

R SC

AR

[MM

]A

STM

D41

72-9

4

NOTE 1 NOTE 2

Rokolub 32 674 33 5 32 22 >220 -40 1.073 0.06 392 0.32 784 0.2 1.26

Rokolub 68 1020 66 11 68 147 >200 -36 1.007 0.06 490 0.38 981 0.1 1.10

Rokolub100 436 95 11 100 100 <230 -31 1.075 0.05 490 0.35 784 0.1 1.12

Rokolub 150 2050 151 22 150 173 200 -34 1.004 0.05 490 0.32 981 0.1 1.46

Rokolub 220 220 36 220 211 210 -35 0.998 0.05 490 0.37 981 0.1

Rokolub 220 VI 3620 260 39 320 194 >250 -30 1.022 0.05 618 0.35 981 0.1 1.17

Rokolub 320 F 2720 270 47 320 235 >260 -20 1.084 0.03 981 0.41 1236 0.3 1.05

Rokolub 460 6085 466 79 460 241 0.04 784 0.38 1236 0.2 1.18

Rokolub 680 5330 600 104 680 268 >250 -7 1.095 0.03 1236 0.50 1569 N/d** 0.97

Table 3. Water partialy soluble Rokolubs properties – EO/PO random copolymer


**Not determinated


8

Water insoluble PAG – Properties*

PRODUCTNAME

MO

LECU

LAR

WEI

GH

T M

w [g

/mol

]

KIN

EMAT

IC V

ISCO

SITY

at

40º

C [c

ST]

KIN

EMAT

IC V

ISCO

SITY

at

100

ºC [c

ST]

ISO

VIS

COSI

TY G

RAD

E

VISC

OSI

TY IN

DEX

FLA

SH P

OIN

T [º

C]

AST

M D

92

CLO

UD

PO

INT

[ºC]

[1 %

AQ

]

POU

R PO

INT

[ºC]

AST

M D

97

DEN

SITY

[g

/cm

3 ] in

20o C

DIN

517

57

FRIC

TIO

N C

OEF

FICI

ENT

AST

M D

2783

-03

MA

X.N

OSE

IZU

RE L

OA

D[N

] A

STM

D27

83-0

3

WEA

R SC

AR

[mm

]A

STM

D27

83-0

3

SEIZ

URE

LO

AD

[N

] A

STM

D27

83-0

3

MA

X. F

RIC

TIO

N

COEF

FICI

ENT

AST

M D

2783

-03

WEA

R SC

AR

[MM

]A

STM

D41

72-9

4

NOTE 1 NOTE 2

Rokolub P-B-20

Rokolub P-B-46 1340 50 10 46 180 225 - <-42 0.988 0.07 490 0.38 1236 0.5 1.33

Rokolub P-B-50 50 9 46 190 >220 - <-42 0.998 0.07 490 0.32 981 0.2 0.76

Rokolub P-B-68 1979 67 10 68 190 >220 - <-30 1.058 0.06 392 0.29 1569 0.5 1.16

Rokolub PO-D-150 1957 135 23 150 220 >220 <-30 0.995 0.05 618 0.35 981 0.2 0.61

Rokolub PO-D-350 0.05 618 0.35 1236 0.5 1.12

Rokolub PO-D-500 3944 290 58 320 267 -30 1.003 0.05 618 0.39 1236 0.5 1.10

Rokolub PO-D-700 6983 760 114 680 220 >220 <-30 1.000 0.05 618 0.35 1236 0.4 0.81

Table 4. Water insoluble Rokolub properties – PO homopolymers


9

Water insoluble PAG – Properties*

PRODUCTNAME

MO

LECU

LAR

WEI

GH

T M

w [g

/mol

]

KIN

EMAT

IC V

ISCO

SITY

at

40º

C [c

ST]

KIN

EMAT

IC V

ISCO

SITY

at

100

ºC [c

ST]

ISO

VIS

COSI

TY G

RAD

E

VISC

OSI

TY IN

DEX

FLA

SH P

OIN

T [º

C]

AST

M D

92

CLO

UD

PO

INT

[ºC]

[1 %

AQ

]

POU

R PO

INT

[ºC]

AST

M D

97

DEN

SITY

[g

/cm

3 ] in

20o C

DIN

517

57

FRIC

TIO

N C

OEF

FICI

ENT

AST

M D

2783

-03

MA

X.N

OSE

IZU

RE L

OA

D[N

] A

STM

D27

83-0

3

WEA

R SC

AR

[mm

]A

STM

D27

83-0

3

SEIZ

URE

LO

AD

[N

] A

STM

D27

83-0

3

MA

X. F

RIC

TIO

N

COEF

FICI

ENT

AST

M D

2783

-03

WEA

R SC

AR

[MM

]A

STM

D41

72-9

4

NOTE 1 NOTE 2

Rokolub P-B-20

Rokolub P-B-46 1340 50 10 46 180 225 - <-42 0.988 0.07 490 0.38 1236 0.5 1.33

Rokolub P-B-50 50 9 46 190 >220 - <-42 0.998 0.07 490 0.32 981 0.2 0.76

Rokolub P-B-68 1979 67 10 68 190 >220 - <-30 1.058 0.06 392 0.29 1569 0.5 1.16

Rokolub PO-D-150 1957 135 23 150 220 >220 <-30 0.995 0.05 618 0.35 981 0.2 0.61

Rokolub PO-D-350 0.05 618 0.35 1236 0.5 1.12

Rokolub PO-D-500 3944 290 58 320 267 -30 1.003 0.05 618 0.39 1236 0.5 1.10

Rokolub PO-D-700 6983 760 114 680 220 >220 <-30 1.000 0.05 618 0.35 1236 0.4 0.81

Table 4. Water insoluble Rokolub properties – PO homopolymers



10

Water soluble PAG – Application

PRODUCTNAME VG INDUSTRIAL GEAR

OILSCOMPRESSORS

OILSHYDRAULIC

FLUID TURBINE

OILTEXTILE

LUBRICANTS MILL&

CALLENDAR METALWORKING

FLUIDSALUMINIUM PROCESSING

MOULD RELEASE

Rokolub 50-B-20 20 X X X

Rokolub 50-B-46 46 X X X X X


Rokolub 50-B-120 100 X X X X

Rokolub 50-B-150 150 X X


Rokolub 60-D-220 220 X X X X X

Rokolub 60-D-320 (Blended) 320 X X X X X

Rokolub 60-D-460 460 X

Rokolub 60-D-1000 1 000 X X X X X X

Table 5. Typical applications for Rokolub base stock products

11

Water soluble PAG – Application


OILSCOMPRESSORS

OILSHYDRAULIC

FLUID TURBINE

OILTEXTILE

LUBRICANTS MILL&



MOULD RELEASE




Rokolub 50-B-120 100 X X X X

Rokolub 50-B-150 150 X X


Rokolub 60-D-220 220 X X X X X

Rokolub 60-D-320 (Blended) 320 X X X X X

Rokolub 60-D-460 460 X

Rokolub 60-D-1000 1 000 X X X X X X


12

Water partially soluble PAG – Application


OILSCOMPRESSORS

OILSHYDRAULIC

FLUID TURBINE

OILTEXTILE

LUBRICANTS MILL&



MOULD RELEASE

Rokolub 32 32 X

Rokolub 68 68 X X X

Rokolub 100 100 X X X X X

Rokolub 150 150 X X X X

Rokolub 220 VI 220 X X

Rokolub 320 320 X X

Rokolub 460 460 X X


OILSCOMPRESSORS

OILSHYDRAULIC

FLUID TURBINE

OILTEXTILE

LUBRICANTS MILL&



MOULD RELEASE

Rokolub P-B-20 20 X

Rokolub P-B-46 32 X X X X

Rokolub P-B-50 46 X X

Rokolub P-B-68 68 X X X

Rokolub P-B-100 100 X X X X X

Rokolub PO-D-150 150 X X X

Rokolub PO-D-350 220 X X


Water insoluble PAG – Application

Note: Indicated application do not limit other usage of products

13

Water partially soluble PAG – Application


OILSCOMPRESSORS

OILSHYDRAULIC

FLUID TURBINE

OILTEXTILE

LUBRICANTS MILL&



MOULD RELEASE

Rokolub 32 32 X

Rokolub 68 68 X X X

Rokolub 100 100 X X X X X

Rokolub 150 150 X X X X

Rokolub 220 VI 220 X X

Rokolub 320 320 X X

Rokolub 460 460 X X


OILSCOMPRESSORS

OILSHYDRAULIC

FLUID TURBINE

OILTEXTILE

LUBRICANTS MILL&



MOULD RELEASE

Rokolub P-B-20 20 X

Rokolub P-B-46 32 X X X X

Rokolub P-B-50 46 X X

Rokolub P-B-68 68 X X X

Rokolub P-B-100 100 X X X X X

Rokolub PO-D-150 150 X X X




14

PAG based product – Solubility

PRODUCTNAME

5% (after mixing)

5%(after 4 h)

5%(after 64 h)

10%(after mixing)

10% (after 4 h)

10% (after 64 h)

15% (after mixing)

15% (after 4 h)

15% (after 64 h)

20% (after mixing)

20% (after 4 h)

20% (after 64 h)

Rokolub 32 CS CS CS CS CS CS TS CS CS TS CS CS

Rokolub 68 CS CS CS TS TS TS TS TS TS TS TS TS

Rokolub 100 CS CS CS CS CS TS TS TS TS TS TS 2PS

Rokolub 150 TS TS TS TS 2PS 2PS TS 2PS 2PS TS 2PS 2PS

Rokolub 220 VI CS CS CS TS TS TS TS TS TS TS TS 2PS

Rokolub 320 F CS 2PS CS TS 2PS CS TS 2PS CS TS 2PS CS

Rokolub 460 TS 2PS CS TS 2PS 2PS TS 2PS TS TS 2PS 2PS

Rokolub 680 CS 2PS CS CS 2PS CS TS 2PS CS TS 2PS CS

Abbreviations:RT - room temperatureCS - clear solutionTS - turbid solutionTPS - two phase solution

15

PRODUCTNAME

5% (after mixing)

5%(after 4 h)

5%(after 64 h)

10%(after mixing)

10% (after 4 h)

10% (after 64 h)

15% (after mixing)

15% (after 4 h)

15% (after 64 h)

20% (after mixing)

20% (after 4 h)

20% (after 64 h)

Rokolub 32 CS CS CS CS CS CS TS CS CS TS CS CS

Rokolub 68 CS CS CS TS TS TS TS TS TS TS TS TS

Rokolub 100 CS CS CS CS CS TS TS TS TS TS TS 2PS

Rokolub 150 TS TS TS TS 2PS 2PS TS 2PS 2PS TS 2PS 2PS

Rokolub 220 VI CS CS CS TS TS TS TS TS TS TS TS 2PS

Rokolub 320 F CS 2PS CS TS 2PS CS TS 2PS CS TS 2PS CS

Rokolub 460 TS 2PS CS TS 2PS 2PS TS 2PS TS TS 2PS 2PS

Rokolub 680 CS 2PS CS CS 2PS CS TS 2PS CS TS 2PS CS


16

PCC Rokita SAInnovations for the future

PCC Rokita SA is one of the leading chemical com-panies operating in Central and Eastern Europe. We provide high-tech solutions in the area of chemical production to deliver unique products for a wide range of industrial applications. Our key focus is the engineering, manufacturing and distribu-tion of chemical products vital for broad range of businesses including plastics, construction, textiles, coating, and many others. We run our activity on a global basis. Sales outside of Poland represent ap-proximately 60% of the total company revenue. Of this revenue, the most important market is Germa-ny, which generates about 40% of our total sales.Our product portfolio includes over 250 products that may be divided into four product groups:• polyols• PAG (polyalkylene glycols)• alkalis, chlorine and chlorine derivatives• phosphorus and naphthalene derivatives The Company runs its activity based on strategic business units.

CHLORINE BUSINESS UNITThe Chlorine Business Unit runs one of the most high-tech, environmentally friendly installations of membrane electrolysis. We provide – among many other products - chlorine and alkalis. Chlo-rine is a key raw material used in the production of 55% of all the products in the chemical indus-try. PCC Rokita SA is the biggest supplier of chlo-rine to water installations in Poland. Apart from chlorine, the unit also manufactures sodium hy-droxide, chlorobenzene and hydrochloric acid.

For more information, please contact: [email protected]

17

PCC Rokita SA is one of the leading chemical com panies operating in Central and Eastern Europe.

We provide high-tech solutions in the area of chemical production to deliver

unique products for a wide range of industrial applications.

POLYOLS BUSINESS UNITThe Polyols Business Unit is one of the biggest European manufacturers of polyether polyols registered under the ROKOPOL® trade name. The ROKOPOL® product line finds its application mainly in the production of flexible foams, rigid foams and CASE applications. The foams are being used in the furniture industry, automotive industry and many others. The unit’s other important product line is ROKOLUB® - a wide range of PAG (polyalkylene glycols) providing the base stock for lubricants.

PHOSPHORUS CHEMISTRY BUSINESS UNIT The Phosphorus Chemistry Business Unit is the biggest producer of phosphorus flame retardants, for polyurethane foams, in Eastern Europe. We also provide naphthalene based super plasticizers for large infrastructure investments in Central and Eastern Europe. Moreover, the portfolio of the business unit also includes innovative products like polymer additives (e.g. flame retardant plasticizers, antioxidants, heat stabilizers) as well as fire-resistant hydraulic fluids and lubricant additives.

As a dominating business entity, PCC Rokita SA runs the PCC Capital Group, which includes over a dozen companies operating mainly in the chemical industry and specialist services industry. These companies provide services both for the PCC Capital Group and for the external market. The strategic investor of the PCC Rokita Group is the German company - PCC SE, which operates on multiple international markets including raw materials for chemistry, transport, energy, coal, coke, fuels, plastics and metallurgy. The International PCC SE Group consociate 78 companies operating in 17 countries of the world.


18 www.products.pcc.eu

PCC Group in the world

PCC Rokita SA

PCC EXOL SA

PCC CP Kosmet Sp. z o.o.PCC Rokita Capital Group, 22 companies, including:PCC Rokita SAPCC Prodex Sp. z o.o.PCC Prodex GmbH (Germany)PCC PU Sp. z o.o.IRPC PCC Co. Ltd. (Thailand)PCC Therm Sp. z o.o.

PCC EXOL Capital Group, 5 companies, including: PCC EXOL SAPCC Chemax Inc. (the USA)PCC EXOL Kimya Sanayi Ve Ticaret Limited Şirketi (Turkey)

Capital Group PCC CP Kosmet, 3 companies, including:PCC CP Kosmet Sp. z o.o.OOO PCC Consumer Products Navigator (Belarus)OOO PCC Consumer Products (Russia)

PCC Intermodal SA

PCC Autochem Sp. z o.o.

PCC MCAA Sp. z o.o.

PolandRussia

Germany

Thailand

Romania

Ukraine

Bulgaria

Ghana

Bosnia and Herzegovina

Czech Republic

Macedonia

Turkey

Iceland Belarus

Slovakia

Latvia

USA

19

TEXT PAGES

Brand Cocoon Silk

Grammage 200

Number of pages 8

COVER PAGES

Brand Cocoon Silk

Grammage 250

Number of pages 4

PUBLICATION

Size (cm) 21 x 29.7

Quantity 350

26 kg of landfill

3 kg CO2 and greenhouse gases

35 km travel in the average European car

1 021 litres of water

60 kWh of energy

42 kg of wood

In accordance with our environmental concerns, this publication from the PCC Group was printed on Cocoon Silk - an ecological double-sided-coated matt paper. This paper is made of 100% waste paper via environment-friendly technology. The FSC® Certificate confirms that the raw materials used during the paper production process come from well-managed forests or other certified and controlled sources.

By using Cocoon Silk rather than non-recycled paper, the environmental impact was reduced by:

Carbon footprint data evaluated by Labelia Conseil in accordance with the Bilan Carbone®methodology. Calculations are based on a comparison between recycled paper used versusa virgin fibre paper - according to the latest European BREF data (virgin fibre paper) available.

let's speak y

our

products

The information in the catalogue is believed to be accurate and to the best of our knowledge, but should be considered as introductory only. Detailed information about products is available in TDS and MSDS.Suggestions for product applications are based on our the best of our knowledge.

The responsibility for the use of products in conformity or otherwise with the suggested application and for determining product suitability for your own purposes rests with the user.

All copyright, trademark rights and other intellectual and industrial property rights and the resulting rights to use this publication and its contents have been transferred to PCC Rokita SA or its licensors. All rights reserved.

Users/readers are not entitled to reproduce this publication in whole or in part, nor are they entitled to reproduce it (excluding reproduction for personal use) or to transfer it to third parties.

Permission to reproduce it for personal use does not apply in respect to data used in other publications, in electronic information systems, or in other media publications. PCC Rokita SA shall not be responsible for data published by users.

October 2018

PCC Rokita SASienkiewicza St. 456-120 Brzeg Dolny, [email protected]

Please visit our capital group business platform: www.products.pcc.eu

POLYALKYLENE GLYCOLS BASED STOCK

Documents