Identify the desired width x height door Prepare Door Slideset concealed carrier and floor guide drilling specs can be found in assembly instructions SSC80KGCC Prepare rough opening as per dimensions Fasten track to split stud wall assembly Insert assembly into rough opening. Level, plum, shim, and fasten 1. 2. 3. 4. 5. Width 1 3/4” (44.45mm) (Door Width x 2) + 1/4” Door Height + 3” Height Pocket Door Cavity Slider Assembling Instructions For Sales and Technical Inquiries, please contact EZ Concept USA T: 1 888 399 5262 | F: 585.545.3010 | E: [email protected]| W: www.ezconcept.com SlideSet Pocket Door Installation Instructions EZ_US_II_WB_DEC17
2
Embed
Pocket Door Cavity Slider Assembling Instructions · Insert rear stop and slide to the rear. 8. Insert rear carrier and slide to the middle. 9. Insert front carrier. 10. Hang door
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Identify the desired width x height door Prepare Door
Slideset concealed carrier andfloor guide drilling specs canbe found in assembly instructionsSSC80KGCC
Prepare rough opening as per dimensions Fasten track to split stud wall assemblyInsert assembly into rough opening.Level, plum, shim, and fasten
1. 2.
3. 4. 5.
Width
1 3/4” (44.45mm)
(Door Width x 2) + 1/4”
Door
Hei
ght +
3”
Heig
ht
Pocket Door Cavity Slider AssemblingInstructions
For Sales and Technical Inquiries, please contact EZ Concept USAT: 1 888 399 5262 | F: 585.545.3010 | E: [email protected] | W: www.ezconcept.com
SlideSet Pocket Door Installation Instructions EZ_US_II_WB_DEC17
6. Install floor guide.
7. Insert rear stop and slide to the rear.
8. Insert rear carrier and slide to the middle.
9. Insert front carrier.
10. Hang door and slide into pocket.
11. Insert front stop and slide to the rear a few inches.
12. Place filler track in gap and fix to the sub-assembly.
13. Adjust and secure stops.
14. Hang Drywall
15. Install Closer Cap.
16. Install Reveal on both the interior and exterior of the door.
17. Tape and mud.
18. Prime and paint.
Closer Cap
Reveal
Reveal
Floor Guide
InsertHardwareHere
Pocket Door Cavity Slider AssemblingInstructions
For Sales and Technical Inquiries, please contact EZ Concept USAT: 1 888 399 5262 | F: 585.545.3010 | E: [email protected] | W: www.ezconcept.com
SlideSet Pocket Door Installation Instructions EZ_US_II_WB_DEC17