Intertek A Architectural Testing TEST REPORT Report No.: F1393.O1-$O1-44 Rendered to: POCAHONTAS ALUMINUM COMPANY, INC. Pocahontas, Arkansas PRODUCT TYPE: Insulated Side-Hinged Door SERIES/MODEL: DD 100 SPECIFICATION: AAMA 1702.2-02, Voluntary Standard for Utilization in Manufactured Housing for Swinging Exterior Passage Doors. ASTM F 330-02, Test Methodfor Structural Performance ofExterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference. 1 909 1 0th Street, Suite 100 Piano, TX 75074 wwwarchtestcom . www.intertek.com/buUding p 469.8140687 f. 717.764.4129 201 5. 1 0.26 1 7:1 1 :21 -07’OO’ Test Date: Report Date: Record Retention End Date: 09/24/15 10/06/15 09/24/19 test fi 393.O1-8O7-44-rO.pdf 1 1/24/2018 12:04:12 PM
10
Embed
Pocahontas Aluminum Company - Pocahontas, AR - Intertek A · 2019. 10. 10. · Intertêk A Architecturat Testing Pocahontas Aluminum Company, Inc. 2001 Industrial Drive P.O Box 756
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Intertek-ATI1909 10th Street Suite 100Piano, Texas(469) 814-0687
Insulated Side-Hinged Door
DD 100
1.0 Report Issued To:
2.0 Test Laboratory:
3.0 Project Summary:
3.1 Product Type:
3.2 Series/Model:
3.3 Compliance Statement: Results obtained are tested values and were secured byusing the designated test method(s). The sample tested successfully met theperformance requirements listed in the referenced specification(s).
3.4 TestDate: 09/24/2015
3.5 Test Record Retention End Date: All test records for this report will be retaineduntil September 24, 2019.
3.6 Test Location: Intertek-ATI testing facility in Piano, Texas.
3.7 Test Sample Source: The test specimen was provided by the client.
3.8 List ofOfficial Observers:
Name Company
test f1393.01401-44-rO.pdf 2
Clint BarnettKen Akins
Architectural Testing, Inc.Pocahontas Aluminum Company
Report No. F1393.O1-$O1-44Record Retention End Date: 09/24/19
Page 1 of 7
1/24/2078 1204:12 PM
IntertekA
1LArchitectural Testing
Report No. F1393.O1-801-44Record Retention End Date: 09/24/19
Page 2 of 7
Test Specification(s):
AAMA 1702.2-02, Voluntary Standard for Utilization in Manufactured Housing forSwinging Exterior Passage Doors.
ASTM E 330-02, Test Methodfor Structural Performance ofExterior Windows, CurtainWalls and Doors by Unform Static Air Pressure Dfference.
The 1-1/2” thick leaf was constructed of 1-3/8” thick foam withf3/$fl wide by 3/4” high solid reinforcement along top and bottom rails and stiles.The reinforcement along the head and the lock stile was made of wood, with theremaining reinforcements made of cellular pvc. A 1/16” thick embossed fiberglass skinwas utilized on the exterior and interior and was secured to the foam with glue. Leafframe was formed from extruded aluminum members. Frame corners were coped,butted, and mechanically fastened using two #6 x 1” pan head Phillips screws. Theinterior of the exterior leg of the frame had vinyl fin weatherstripping inserted into it.The exterior leg of the frame was secured to the fiberglass skin with a sealantcompound. A cellular PVC lockblockwas 4-1/4” x 15” x 1-3/8” thick.
Sash Member Material Description
.
All members Aluminum Extruded Vinyl
.______________
Joinery Type DetailSealed and secured with two #6 x 1” Phillips
All corners Coped & Buttedhead screws.
5.4 Weatherstripping:
Description Quantity Location
0.110” x 0.160” pile 1 Row Interior ofexterior leg of leaf frame
Sash stile jamb face-interior lateral0.187” x 0.250” pile 1 Row
edgeSash bottom rail sill face- interior
0.187” x 0.250” pile 1 Rowlateral edge
5.5 Glazing: No conclusions of any kind regarding the adequacy or inadequacy of theglass in anyglazed testspecimen(s) can be made.
per ASTM E 330+2202 Pa (+46.00 psO-2202 Pa (-46.00 psfj Pass No damage 2, 3
Uniform Load Deflection,perASTM E 330
taken on lock stile+1440 Pa (+30.08 psO 2 mm (0.06”)-1440 Pa (-30.08 psf) 6 mm (0.24”) Report Only 1, 2, 3
Uniform Load Structural,per ASTM E 330
taken on lock stile+2160 Pa (+45.11 psO < 1 mm (<0.01”) 8 mm (0.31”) max.-2160 Pa (-45.11 psf) 1 mm (0.04”) 8 mm (0.31”) max. 1, 2, 3
Note 1: With and without insect screen.
Note 2: Loads were heldfor 1 0 seconds.
Note 3: Tape andfilm were used to seal against air leakage during structural testing. Inour opinion, the tape andfilm did not influence the results ofthe test.
test f1393.O1-SO1-44-rO.pdf 6 7/24/2018 1204:1 2 PM
Intertek
IntertekA
Architectural Testing
Digitally Signed by: TylerWesterfing
Tyler Westerling, RE.Senior Project Engineer
Architectural Testing will service this report for the entire test record retention period.Test records that are retained such as detailed drawings, datasheets, representativesamples of test specimens, or other pertinent project documentation will be retained byArchitectural Testing, Inc. for the entire test record retention period.
This report does not constitute certification ofthis product nor an opinion or endorsementby this laboratory. It is the exclusive property of the client so named herein and relatesonly to the specimen(s) tested. This report may not be reproduced, except in full, withoutthe written approval ofArchitectural Testing, Inc.
For ARCHITECTURAL TESTING, Inc.
Digitally Signed by: Clint Bameft
Clint BarnettTechnician
CB:ac/ms/ss
Attachments (pages): This report is complete only when all attachments listed are included.Appendix-A: Drawing(s) (9) Complete drawings packet on file with Architectural Testing, Inc.
This report produced from controlled document template ATI 00497, revised 01/27/12.
testff393.O1-807-44-rO.pdf 7
Report No. F1393.01-801-44Record Retention End Date: 09/24/19
Page 6 of 7
1/24/201$ 1204:12PM
IntertekA Report No. F1393.O1-801-44
Architectural TestingRecord Retention End Date: 09/24/19
Page 7 of 7
APPENDIX A
Drawings
7/24/2018 1204:72 PMtest f7393.O7-$O1-44-rO.pdf $
Door Installation Instructions
1 . Center door in opening (height and width)2. Insert I screw in top hinge side of door, bottom hinge side of door, and middle
hinge side of door3. Remove screw from shipping clip to outside frame4. Center frame on door knob side so gap at top and bottom are equal5 , Install rest of screws6. remove shipping clip from inside frame
A Architectural Testing, Inc
Test sample complies with
/—k details shown herein. Anydeviations are noted in thetest report or drawings.