Young Tech Co. Ltd
Apr 02, 2016
Young Tech Co. Ltd
Our Products
Smart PositionerElectro Pneumatic PositionerPneumatic PositionerAir Filter RegulatorVolume BoosterLock Up ValveSnap Acting RelaySolenoid ValvePosition TransmitterLimit Switch BoxI/P Converter
Pneumatic Positioner
The Pneumatic Pneumatic Positioner YT-1200 series are used for pneumatic valve actuators by means of pneumatic controller or control systems with an output signal of 3 to 5 psi or split ranges. -The product can operate normally in very extreme environment, such as vibration and temperature. -The durability has been proven after testing 2 million cycles at the minimum. - Response time is very short and accurate. - Simple part change can set 1/2 Split Range. - It is economical due to less air-consumption. - Direct / Reverse action can be set easily. - Zero & Span adjustment processes are simple. - Feedback connection is easy.
Type Of Pneumatic Positioner
YT-1200R Pneumatic Positioner
YT-1200L Pneumatic Positioner
The Pneumatic Pneumatic Positioner YT-1200series are used for pneumatic valve actuators bymeans of pneumatic controller or control systemswith an output signal of 3 to 5 psi or split ranges.- The product can operate normally in veryextreme environment, such as vibration andtemperature. - The durability has been provenafter testing 2 million cycles at the minimum. -Response time is very short and accurate. -Simple part change can set 1/2 Split Range. - It iseconomical due to less air-consumption. - Direct /Reverse action can be set easily. - Zero & Spanadjustment processes are simple. - Feedbackconnection is easy.
YT-1200R Pneumatic Positioner
YT-1200L Pneumatic Positioner
The Pneumatic Pneumatic Positioner YT-1200 seriesare used for pneumatic valve actuators by means ofpneumatic controller or control systems with anoutput signal of 3 to 5 psi or split ranges. - Theproduct can operate normally in very extremeenvironment, such as vibration and temperature. -The durability has been proven after testing 2 millioncycles at the minimum. - Response time is very shortand accurate. - Simple part change can set 1/2 SplitRange. - It is economical due to less air-consumption.- Direct / Reverse action can be set easily. - Zero &Span adjustment processes are simple. - Feedbackconnection is easy.
For More Info About My
Product And Services Visit
On My Website
WWW.YTCINDIA.COM
Or mail at [email protected] Call At Tel. No.: +91-11-
2201-4325,4327,65094516Fax: +91-11-22014326