Prices on request · Published 07.2020 · We accept no responsibility for errors or changes.· PDF: www.x-floc.com/download X-Floc Dämmtechnik-Maschinen GmbH | Rosine-Starz-Straße 12 · 71272 Renningen · Germany | Telephone + 49 - 7159 - 80470 - 30 · Fax - 40 [email protected] · www.x-floc.com www.x-floc.com Pneumatic Fibre Switch Compact, Mobile Solution for Rational Hose Switches X-Floc’s pneumatic fibre switches facilitate an uninterrupt- ible switchover between two hoses when conveying loose insulation material, good flow bulk material as well further approved insulation materials. With the pneumatic fibre switch, the blow-in professional can, for example, provide particular economical pre- hosing, more filling stations out of an insulation blowing machine between blowing and vacuuming switchovers, switch the hosing system rapidly without pressure, etc. For the switch control, there are more solutions available: in connection with a radio remote control, the fibre switch can be controlled easily. It can also be connected directly at the insulation blowing machine’s additional device port and synchronous with its switching. Furthermore, a combination with a stored programme control (SPC) is possible. The required final position switches are available. (Art. No. 4022). Regardless of whether the stationary element filling is carried out in the workshop or on the mobile construc- tion site, the pneumatic fibre switch offers the blow-in pro plentiful application options. Inlet-Side Outlet-Side Inlets Outlets Weight Prod. no. 1 × NW75 (3“) 2 × NW75 (3“) ca. 8,3 kg 3846 2 × NW75 (3“) 3 × NW75 (3“) ca. 8,3 kg 5179 Inlets Radio control connection E1 Radio Remote Control FFB22 unidirectional Art.-Nr. 8229 275 mm 130 mm 460 mm Ø 76 mm E2 A1 A2 A3 Connection air pressure Outlets Pneumatic Fibre Switch Cascade with 4 Outflows Material sorting gate for uninterruptible switchover from solid material air flows. f With a radio remote control f Connectable over foreign signals Prod. no. 5063