1 1 2 2 3 3 4 4 A A B B REV SHEET OF PN 10563 Nikon Alphaphot Assembly Instructions 1 9 4 Wayne Bonin 3/23/2019 Parts included but not shown: PN 10457 Hex Key 2.5mm short arm (for M3 screws) Nikon Alphaphot Pot Bracket (save from microscope) PN 10351 Pot-Cable Assy (15 in cable) PN 10560 Nikon Alphaphot Illuminator Assy PN 10561 19mm long x 5mm hex standoff (2 pcs) PN 10348 SHCS M3 x 0.5 x 8mm (2 pcs) Pot Knob (save from microscope) Nanodyne Replacement Illuminator for Nikon Alphaphot Microscope Installation Instructions - Included Items Copyright 2019 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only. www.nano-dyne.com Wayne Bonin 651-323-8592 3M VHB tape to secure wires Power supplies are subject to substitution without notice due to availability issues and changes in regulations. The illuminator may be powered by plugging the cable into the power supply provided, or into a suitable USB port on a computer or other device. PN 10733 Power Supply - XP Power 5V 1A and PN 10734 Cable Assy 1.35mm ID x 3.5mm OD RA plug to USB A, 6 foot.
9
Embed
PN 10457 Hex Key 2.5mm short arm (for M3 screws) 10563 Nikon... · PN 10457 Hex Key 2.5mm short arm (for M3 screws) Nikon Alphaphot Pot Bracket (save from microscope) PN 10351 Pot-Cable
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
1
2
2
3
3
4
4
A A
B B
REV
SHEETOF
PN 10563 Nikon Alphaphot
Assembly Instructions
1 9
4
Wayne Bonin
3/23/2019
Parts included but not shown:
PN 10457 Hex Key 2.5mm short arm
(for M3 screws)
Nikon Alphaphot Pot Bracket
(save from microscope)
PN 10351 Pot-Cable Assy
(15 in cable)
PN 10560 Nikon Alphaphot
Illuminator Assy
PN 10561 19mm long x 5mm
hex standoff (2 pcs)
PN 10348 SHCS M3 x 0.5 x 8mm (2 pcs)
Pot Knob (save
from microscope)
Nanodyne Replacement Illuminator for Nikon Alphaphot Microscope Installation Instructions - Included Items
Re-install the light cover on the bottom of the microscope, plug in the power supply, and the installation is complete.
Nanodyne Replacement Illuminator for Nikon Alphaphot Microscope Installation Instructions - Step 8. Re-install light cover and connect new power supply.