PRICE LIST CPS-0420 Rev. 1 March 10, 2020 www.canplasplumbing.com 1-800-461-5300 PLUMBING SUNDRIES APRIL 1, 2020 SUPERCEDES CPS-0219 (FEBRUARY 1, 2019) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information.
16
Embed
PLUMBING SUNDRIES - Canplas€¦ · PLUMBING SUNDRIES APRIL 1, 2020 SUPERCEDES CPS-0219 (FEBRUARY 1, 2019) Our website pricing is the current list price and may vary from our printed
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PRICE LIST
CPS-0420Rev. 1 March 10, 2020
www.canplasplumbing.com 1-800-461-5300
PLUMBING SUNDRIES
APRIL 1, 2020SUPERCEDES CPS-0219 (FEBRUARY 1, 2019)
Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information.
PLUMBING SUNDRIESPRICE LIST CPS-0420 APRIL1, 2020
www.canplasplumbing.com - 2 -
TABLE OF CONTENTS Page
Air Admittance Valves 3
Specialty Flange Repair Rings 4
Vent Pipe Cap 4
ABS & PVC Shower Drains 5
ABS & PVC Utility Drains & Cleanouts 6
Floor Sinks 7
Brass Clean Out Plugs 7
Expansion Joints 8
ABS & PVC Backwater Valves 9
Backwater Valve Components 11
Waste & Over�ow - Indirect 12
Waste & Over�ow - Convertible 13
Waste & Over�ow - Half-kits 14
Numerical Index 15
TERMS AND CONDITIONS OF SALE1. GeneralExcept where otherwise agreed to in writing by Canplas all sales are subject to the following terms and conditions. Canplas reserves the right to modify these terms and conditions at its discretion and without notice.
2. PricesAll prices quoted or published are F.O.B. Canplas’ factory or authorized warehouse. Published prices are subject to change without notice until orders are accepted by the issuance of an order con�rmation. Canplas may agree in writing to protect prices for an extended period of time for speci�c projects or quotations. Orders may be shipped in whole or in part at Canplas’ discretion and will be immediately invoiced upon shipment. Any and all sales, manufacturers’ taxes and/or other charges levied or imposed by any governmental authority, foreign or domestic, upon any merchandise sold or contracted to be sold shall be paid by the purchaser and added to the purchase price unless satisfactory and appropriate tax exception certi�cates are supplied to the Seller.
3. Payment TermsUnless other terms of payment are agreed to in writing by Canplas or otherwise indicated on speci�c published price lists, payment is due upon delivery of the products. If applicable, cash discounts, expressed as a percentage, are calculated on the net invoiced prices before any taxes, freight or other charges and can only be deducted from payment if Canplas receives payment from the purchaser on or prior to the due date. Interest shall be charged at a rate of 1.5% per month equating to an annual rate of 18% on all overdue accounts. The granting of credit by Canplas is based on its evaluation of the purchaser’s �nancial condition. If such �nancial condition does not justify continuance of shipment on credit, Canplas may require full or partial payment in advance.
4. OrdersPurchaser’s orders are conditional upon satisfactory credit approval by Canplas. Minimum order values shall be as published in the applicable price list or as agreed to in writing by Canplas. Once con�rmed by Canplas, orders for custom made products manufactured to the Purchaser’s speci�cations and orders for large quantities of non-inventoried products cannot be cancelled, modi�ed or returned, without the written consent of Canplas.
5. ShipmentsAll shipments are F.O.B. Canplas’ factory or authorized warehouse. Quoted delivery schedules or those contained in an order acknowledgement are approximate only. Shipment will be made within reasonable proximity to the quoted delivery schedule. Prepaid orders will be shipped via the most economical method at the discretion of Canplas. Should the customer select an alternative method with a higher rate, the di�erence will be charged to the customer
6. Shipping ResponsibilityCanplas’ responsibility ceases when the carrier signs for the shipment in good order. Under no circumstances will Canplas be responsible for any damage caused by delays in shipment, whether resulting from causes within or beyond the control of Canplas. Canplas shall bear no liability for products lost or damaged during transit. Canplas is not responsible for loss or damage to goods in transit, or delays or carriers in delivering shipments or for damages resulting from such delays as those caused by �re, explosion, act of God, strike or other di�erence with workmen, shortage of material or labor, delays in transportation, government restrictions, war, riot, civil commotion or cause beyond our control. Where shortage or damage is apparent, details should be noted by the carrier on the freight bill at the time of delivery. In case of concealed damage, carrier should be called at once to inspect the damaged shipment. Do not return damaged goods.
7. Returned GoodsPrior to returning any products for any reason the purchaser must obtain a Returned Goods Authorization (RGA) form from Canplas which must accompany the goods being returned. For returned goods that are acceptable for credit, a restocking charge of twenty-�ve percent (25%) will be assessed against the credit to cover handling, inspection and/or repackaging. Products must be returned freight prepaid, unless otherwise authorized by Canplas. Products must be received in good saleable condition and, if required, in full carton quantities and in their original packaging. Canplas reserves the right to refuse the return of certain products, such as custom-made con�gurations, obsolete products, excessive quantities or other specialty products. Canplas may, at its discretion, direct that products be destroyed for credit rather than returned.
8. Product Modi�cationsCanplas reserves the right to make changes or improvements to its products in its sole discretion and without assuming any further obligation.
9. Force MajeureCanplas shall not be responsible or liable for any non-performance or delay in performance hereunder or any loss or damage of any kind whatsoever, direct or indirect, su�ered by the purchaser, subsequent purchasers, ultimate users of the goods or any other person, as a result of any causes beyond the reasonable control of Canplas including, without limitation, price alterations, delay in shipments, strikes, lock-outs, �res, �oods, civil commotion, riots, wars, acts of God, embargos, labor shortages, walk-outs, work slowdowns, accidents, breakdowns, delays in manufacture, transportation or delivery of goods or materials, shortages of materials or supplies or government acts or regulations.
10. MiscellaneousProduct names used in Canplas published documents, electronic or printed, are for identi�cation purposes only. All trademarks registered or otherwise, are the property of their respective owners.
11. Governing LawThis agreement and all associated rights and obligations shall be governed by the laws of the province of Ontario and all actions commenced pursuant hereto shall be brought in a court of jurisdiction residing in the province of Ontario.
12. WarrantyCanplas products are carefully inspected for manufacturing defects, however, it is not always possible to detect hidden defects. Unless otherwise speci�cally stated in writing, Canplas products are warranted only to the extent that Canplas will replace without charge, products proven to have manufacturing defects within 6 months of the date of delivery thereof and provided Canplas has been given an opportunity to inspect the product alleged to be defective and the installation or use thereof. NO WARRANTY IS INCLUDED AGAINST ANY EXPENSE FOR REMOVAL, REINSTALLATION OR OTHER CONSEQUENTIAL DAMAGES ARISING FROM ANY DEFECT. THE WARRANTIES SET OUT ABOVE ARE THE ONLY WARRANTIES MADE BY SELLER AND ARE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
PLUMBING SUNDRIESPRICE LIST CPS-0420 APRIL1, 2020
DESC. PART # SKID QTY.
CTN. QTY. SIZE PRICE
EACH DESC. PART # SKID QTY.
CTN. QTY. SIZE PRICE
EACH
- 3 - www.canplasplumbing.com
by
Eliminate the hassle and expense of
connecting drain �xtures to an
external vent line
Allows air to enter the drainage system, while preventing sewer gases from escaping. The AAV only opens under negative pressure in the piping system, while remaining closed if there is positive or ambient air pressure - Eliminating the need for external venting!
1-1/2” & 2” For �xture and branch ventingAir Admittance Valves
ABS
13112011 10 1-1/2 & 2 58.76PVC
13212011 - 10 1-1/2 & 2 58.76
DESC. PART # SKID QTY.
CTN. QTY. SIZE PRICE
EACH
PLUMBING SUNDRIESPRICE LIST CPS-0420 APRIL1, 2020
DESC. PART # SKID QTY.
CTN. QTY. SIZE PRICE
EACH DESC. PART # SKID QTY.
CTN. QTY. SIZE PRICE
EACH
www.canplasplumbing.com - 4 -
VENT PIPE CAPPlastic
material • InjectionmoldedinPlastic. function • Preventsdebrisfromenteringventpipeswithoutobstructingair flow. features & benefits • Interiorsupportsaccommodate either 3" or 4" pipe in a variety of materials(ABSDWV,PVCDWVandPVCsewer). (No double stocking). • Cap is securedtoventpipebyutilizingtwoself-tappingscrews. (Reduces chance of unauthorized removal). • Installationscrewsarerecessedintothecap. (Eliminating a possible hazardduetoprotrudingscrews). • Coloursaredesignedtomatchthoseofthepipe(whiteandgreen) foraprofessional appearance. • Stainlesssteelinstallationscrews are secured into the cap,priorto shipping (prevents accidental loss or replacement).
Consult your local plumbing o�cial or plumbing code to con�rm compliance.
CLEANOUT PLUGS
FLOOR SINK REPLACEMENT HARDWARE KIT
Kit Number
For Drains Includes List Price
3947NNH 324708 #10-16 x 1-1/2” Long Flat Head Screw (2) #10 x 5/8” Long Hex/Phillips Screw (12)
SEE C39PRICE LIST
324709
324712
324713
FLOOR SINKS
FLOOR SINK REPLACEMENT STRAINER
394712-4 2700 150 5 SEE C39PRICE LIST
PLUMBING SUNDRIESPRICE LIST CPS-0420 APRIL1, 2020
DESC. PART # SKID QTY.
CTN. QTY. SIZE PRICE
EACH DESC. PART # SKID QTY.
CTN. QTY. SIZE PRICE
EACH
www.canplasplumbing.com - 8 -
EXPANSION JOINTS
Allows for the expansion and contraction of pipe due to temperature change and the shrinkage of building materials that the pipe is connected to.
Expansion Joints• Injected molded in ABS (Black) and PVC (Grey).• Nitrile Buna-N O-ring.• PQAA Grease #2 lubricant.
Features• Allows for up to 3” (7.6 cm) of travel (Type I) or 8” (20.3 cm) of travel (Type II).• Flow direction and proper degree of extention indicated on expansion joint.• Approved for use in vertical applications.
Benefits• Allows movement without leakage.• Removes the stress from both pipe and fittings which could cause failure of the piping system.
Applications• For Drain, Waste & Vent applications (non-pressure).• For Log Homes.• For straight pipe runs of 30 ft. (9.1 m) or longer.
Approvals • CSA Certified, IAPMO Listed
Installation Instructions1. Locate unit (plunger side up). Perferably beneath lowest �xture.2. Push plunger (inner section) until unit is fully closed. 3. Pull plunger back out speci�ed distance according to temperature at time of installation.
Fahrenheit Degrees Celsius Degrees Distance
30507085
0102030
2.5” or 65mm2.25” or 55mm2” or 50 mm1.75” or 45mm
Based on 20 feet (6 meters) installation.
, IAPMO listed
White
EXPANSION JOINT - HxHABS TYPE I - 3” Travel
113811ABC 1728 12 1½ SeeC10-11PriceList
113812ABC 1080 15 2 SeeC10-11PriceList
113813ABC 480 15 3 SeeC10-11PriceList
PVC TYPE I - 3” Travel
213811ABC 1728 12 1½ SeeC20-21PriceList
213812ABC 1080 15 2 SeeC20-21PriceList
213813ABC 480 15 3 SeeC20-21PriceList
ABS TYPE II - 8” Travel
113814ABC 128 4 4 SeeC10-11PriceList
PVC TYPE II - 8” Travel
213814ABC 128 4 4 SeeC20-21PriceList
EXPANSION JOINT - HxSpgEndPistonABS TYPE I - 3” Travel
113811BBC 1728 12 1½ SeeC10-11PriceList
113812BBC 1080 15 2 SeeC10-11PriceList
113813BBC 480 15 3 SeeC10-11PriceList
PVC TYPE I - 3” Travel
213811BBC 1728 12 1½ SeeC20-21PriceList
213812BBC 1080 15 2 SeeC20-21PriceList
213813BBC 480 15 3 SeeC20-21PriceList
Exclusively from
PLUMBING SUNDRIESPRICE LIST CPS-0420 APRIL1, 2020
DESC. PART # SKID QTY.
CTN. QTY. SIZE PRICE
EACH DESC. PART # SKID QTY.
CTN. QTY. SIZE PRICE
EACH
- 9 - www.canplasplumbing.com
90° BACKWATER VALVE - Spg x H x HABS
123293D 270 15 For3”BWV 194.27
LID FOR ABS (BLACK) ACCESS SLEEVESABS Lid
123287-2 - 1 3 19.43
123285-2 - 1 4 22.94
BACKWATER VALVE SLEEVE KIT - For use with Sewer Pipe (Standard, DR35 or DR28)
ABS
123302 1440 10 For1½”&2”BWVs 55.05PVC (white)
223302W 1440 10 For1½”&2”BWVs 46.79
BACKWATER VALVE with 16” access sleeve and ABS lidABS - With DWV Hubs
123272 128 1 2 164.80
123287 84 1 3 168.36
123285 45 1 4 181.33PVC (grey) - With DWV Hubs
223285 45 1 4 154.11PVC (white) - With DWV Hubs
223272W 128 1 2 140.09
223287W 84 1 3 143.12
223285W 45 1 4 154.11PVC (white) - With Sewer Hubs
223290W 84 1 3 143.12
223288W 45 1 4 154.11
BACKWATER VALVEABS - With DWV Hubs
123281 1080 15 1½ 84.16
123282 1080 15 2 129.52
123283 320 10 3 142.45
123284 128 4 4 155.42
123286 48 1 6 388.55PVC (grey) - With DWV Hubs
223281 1080 15 1½ 71.54
223282 1080 15 2 110.07
223283 320 10 3 121.11
223284 128 4 4 132.10
BACKWATER VALVE - WHITE PVCPVC (white) - With DWV Hubs
PLEASE NOTE: WASTE & OVERFLOW HALF-KITS INCLUDE COARSE THREAD TRIM HARDWARE WHICH ARE NOT INTERCHANGEABLE WITH GREAT WHITE® WASTE & OVERFLOW FINE THREAD HARDWARE