APPLICATIONS
Onshore flowback and well testing
Mill out operations of down-hole plugs
Well clean-up operations
Extended production tests
Stops debris from milled plugs preventing plugging in flow back equipment
Dual plug catcher, incorporates two legs to divert flow through one leg while the clean up process continues
2” complete bypass allows continuous operation
APPLICATIONS
FEATURES & BENEFITSFEATURES & BENEFITS
Covenant’s Plug (or debris) Catcher is designed to recover large solid pieces that flow from a well during mill out operations of down hole plugs. Plug Catchers are normally positioned upstream of the choke manifold to prevent erosion damage of downstream equipment. Plug Catchers are part of the well control kit and are designed to meet API 6A specifications.
Covenant’s plug catchers contain perforated or slotted tubing screens, which are designed for 1.5 times flow. Well effluent flows through the screens, stopping solids larger than the perforations from being processed down the flow scheme to the choke manifold. Screens can be flushed clean, and removed from the plug catcher and replaced with new screens as needed.
Covenant Plug Catchers come in dual leg configurations. Dual legs allow flow to be switched from one leg to the other for various mill out process, thus allowing continuous, uninterrupted flow of the well. A 2 inch bypass line runs down the centre of the catcher if needed.
PRODUCTION TESTINGPLUG CATCHER DUAL TUBE
CTEST.COM 832.500.31071600 Highway 6, Suite 360Sugar Land, TX 77478
Copyright @ 2014 Covenant Testing Technologies, LLC. All rights reserved.
Working Pressurepsi
ScreensPer Tube
SlotsPer Screen
Slot Sizein
Style
Design TemperatureF
Valve Type
ConnectionInlet
ConnectionOutlet
DimensionsL x W x H
Weightlbs
3” Trash/PlugCatcher
3” Trash/PlugCatcher
3
6
3” x 3/16”
Dual Tube
250
Plug Valve
3” 1502
2” 1502
8.28” x 5.55” x 2.9”
3,000
15,000