Reduces TDS, Hardness, Fluorides, Arsenic, Nitrates etc. to Deliver WHO standards Drinking water • No Chemicals • Low Power • Low Wastage The Next Generation Water Treatment System for Ground / Surface Water An Excellent Alternative to Reverse Osmosis Systems
18
Embed
Plimmer:The Next Generation Water Treatment System for Ground / Surface WaterAquasphere_Indovation 2015_23 January 2015
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Reduces TDS, Hardness, Fluorides, Arsenic, Nitrates etc. to Deliver
WHO standards Drinking water
• No Chemicals • Low Power• Low Wastage
The Next Generation Water Treatment System
for Ground / Surface Water
An Excellent Alternative to Reverse Osmosis Systems
What is Plimmer®
Plimmer™ is new generation of water treatment system that treats Ground / Surface water to deliver drinking water as per WHO / IS 10500 standards
2Company Confidential
No Membranes
Not MediaBased
Not Resins / Chemicals based
It Treats all these in a Single Pass
3Company Confidential
A Common System to manage water issues in multiple locations
SALTS METALS OTHERS
• Total Dissolved Solids
• Total Hardness
• Calcium Carbonate
• Magnesium Carbonate
• Sodium Chloride
• Phosphates
• Sulphates
• Chlorides
• Nitrates
• Fluoride ...
• Chrome
• Iron
• Arsenic
• Nickel
• Copper
• Zinc
• Cadmium
• Mercury
• Manganese
• Lead
• Vanadium ....
• Bacteria
• Ammonia
• Chromium 6 ...
Why is this Product and
Technology better than RO
Systems
10-12,000 Liters of Water
required to produce
5000 LPD
RO Systems
70% Wastage
6,000 Liters of Water
required to produce
5000 LPD
Plimmer® System
20% Wastage
1. Low Water Wastage System
Company Confidential 5
Wastage from Plimmer is Less than 20% as against 70% from conventional
RO Systems
Conserve Water Twice as Much !!
2. Low Power Usage
Company Confidential 6
Plimmer® uses 1/4th the amount of Power required of a RO System
Needs Single Phase Power
And works on Low Voltage Situation 160V – 230V
Low Carbon Emission !!
3. Low Consumables Requirement
Company Confidential 7
No Frequent Membrane change required
Plimmer® CDI cells lasts for 10-12 years
Results in very Low Operating Cost for Production of Water
Liter
4. Retained Minerals in Water
Company Confidential 8
Plimmer® retains adequate quantity of minerals required for body as per
WHO Standards
5. Simple and Easy to Operate
Company Confidential 9
Requires no Special Skill sets to Operate Plant
Local Resource can be trained to Maintain plant
Fully Automatic System – to handle Indian conditions
6. Small Footprint – Easy to Place anywhere
Company Confidential 10
Easy to Deploy in Schools, Community Centres, Health Centres
Modularly Built to ensure Quick and Easy Installation
Capacity ranges from 100 LPH to 2000 LPH to Support Small Villages to
Gram Panchayats
Working in many locations in India
Company Confidential 11
Plimmer being Operated using Solar
System for an Individual home
Community wide treatment plant
For 50 villas
Rural Drinking water under test in a
Village in Karnataka
How Plimmer® Works
Plimmer® is based on Capacitive De-Ionization Technology
13Company Confidential
• Capacitive deionization (CDI) is a technology to deionize water by applying an electrical potential difference over two porous carbon electrodes
• The system comprises of “CDI Cells” which has several electrodes stacked in a compact case (almosts 180 electrodes)
• As water at Low Pressure moves through these electrodes, a direct current at a potential difference of 1.6 Volt is supplied.
• This creates an electrostatic field that attracts the ions dissolved in water to the electrodes. Operating as low voltages, electrolysis and gas production will not occur. The result is the partial or total demineralization of the water.