06/15/20 22 © 2013 Plexxi, Inc. | Proprietary & Confidential | Plexxi Switch 2 Photonic and Packet Switching at Data Center Scale October 2013 1
Jun 19, 2015
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
Plexxi Switch 2Photonic and Packet Switching at Data Center Scale
October 2013
1
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
2
THE PLEXXI SWITCH FABRIC
SDN-based Switching Infrastructure
• Scalable L1/L2/L3 Ethernet/IP architecture
• Flat, scale-out optical architecture
• Controller-based with rich APIs
• Integration-driven, Application-oriented
Plexxi Switch: Packet/Photonic Fabric
• Scalable Plexxi fabric solution‒ Dense 10/40G Access Switching‒ Expanded Photonic Fabric
• Fabric Scale and Diversity‒ Multi-ring interconnect topologies
• Flexible Transport‒ Optical pseudowire capabilities‒ Non-Ethernet transport and L1 mirroring
PLEXXISWITCH
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
3
SOLUTION
CONTROL SWITCH CONNECTAFFINITY
THE
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
4
PLEXXI ARCHITECTURE
WORKFLOW CONNECTORS WORKLOAD CONNECTORS
Network Analytics
Application Analytics
Storage Clusters
Service AssuranceData Services Engine
Affinity Model
Network Topography
Algorithmic Fitting EnginePLEXXI
CONTROLPLEXXI
INTERFACE
Plexxi WebGUI
Plexxi Shell
Affinity
API
PLEXXI SWITCH FABRIC
Analytics Topology
Plexxi Switch 2
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
5
PLEXXI HARDWARE PORTFOLIO
Plexxi PSIPod Switch Interconnect
Switch 2s• 10GbE/40GbE Density – 3:1 o/s – 2RU
Switch 2• Multi-Dimensional Rings – 1:1 o/s – 2RU
Switch 1x• 10GbE Density – 2:1 o/s – 1RU
Switch 2sp• 10GbE/40GbE Density – 3:1 o/s – 2RU
Switch 2p• Multi-dimensional Interconnect – 1:1 o/s – 2RU
PSI Chassis• Optical Spine – Passive Interconnect – 1RU
Plexxi SwitchScale-Out Optical Fabric
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
6
PLEXXI SWITCH 1X1RU Top-of-Rack or Core Ring Deployments
Dense 10GbE Access at 2:1 oversubscription
48x10GbE Access Ports in 1 RU‒ 4x QSFP+ (4x40GbE or 16x 10/1GbE)‒ 32x SFP+ 10/1GbE
2x LightRail Interfaces, each carrying 12x10GbE‒ 10km WDM Optics‒ 240Gbps FDx uplink capacity
CPU complex: Quad Core i5/8 GB DRAM
Reversible fans and power supplies‒ Flexible Support for Hot Aisle/Cold Aisle deployments
2x LightRail™
1 RU ChassisMax/Typical Power Draw: 250 W/ 120 W
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
7
Dense 10GbE Access at 3:1 oversubscription
72x10GbE Access Ports in 2 RU‒ 16x QSFP+ (16x40GbE or 64x 10/1GbE)‒ 8x SFP+ 10/1GbE
FlexxPorts*: 4x SFP+
2x LightRail Interfaces, each carrying 12x10GbE‒ 10km WDM Optics‒ 240Gbps FDx uplink capacity
CPU complex: Quad Core i5/16 GB DRAM
Reversible fans and power supplies‒ Flexible Support for Hot Aisle/Cold Aisle deployments
PLEXXI SWITCH 2SDense 10GbE Edge Switch
2 RU ChassisMax/Typical Power Draw: 400W/250W* FlexxPorts: allow direct-connect to the LightRail Fabric for fabric extension or non-Ethernet transport
2x LightRail™
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
8
PLEXXI SWITCH 2Multi-Dimensional Interconnect SwitchExpanded L1 CrossPoint, 1:1 oversubscription
48x10GbE Access Ports in 2RU‒ 12x QSFP+ (12x 40GbE or 48x 10/1GbE)
FlexxPorts*: 4x QSFP+ and 12x SFP+
4x LightRail Interfaces‒ 10 km single-mode WDM optics (480Gbps FDx Uplink)
CPU complex: Quad Core i5/16 GB DRAM
• Enables multi-degree ring interconnect• Doubles photonic fabric capacity• Increase cross-sectional bandwidth and
add low-latency or dedicated capacity* FlexxPorts: allow direct-connect to the LightRail Fabric
for fabric extension or non-Ethernet transport
2 RU ChassisMax/Typical Power Draw: 500W/400W
4x LightRail™
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
9
PLEXXI SWITCH SCALING
SWITCH FABRIC• L2/L3 Fabric Capacity: 2.56 Tbps
• Max Usable Capacity: 1.92Tbs
• Packet Lookup rate: Wire-speed
SWITCH 1x / 2 / 2s
SWITCH FABRIC & OPTICAL
CAPACITY
L2/L3 SUPPORT
LAYER 2 SCALING• MAC Addresses: 288K
L2 PROTOCOL SUPPORT• IGMPv2 Snooping
• LACP
LAYER 3 SCALING• IPv4 Prefixes: 16K
L3 PROTOCOL SUPPORT• IPv4 Static Routes
• OSPFv2, BGP, PIMv2
OPTICAL FABRIC• > 3.2Tbps Optical Cross-Connect
• Switch 2:
• 4x LightRail™ (480Gbps capacity)
• Switch 2s:
• 2x LightRail™ (240Gbps capacity)
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
10
EXTENDING THE PLEXXI FABRIC
Switch 1x
Switch 2s
Switch 2
Common LightRail™ Interconnect
Extended 10GbE access port density• Switch 2s coexists in existing Switch 1x ring• Common LightRail™ optical fabric and
capabilitiesOptical Pass-through and Spatial Reuse
• Fabric links not terminated locally pass passively through each switch
• Pass-through links unaffected by loss of power or forwarding in a switch
Optical Resiliency• Automatic optical quality and fabric link
monitoring• Fast local repair, even when disconnected
from Plexxi Control
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
11
PLEXXI SWITCH 2: ARCHITECTUREFlexxPorts: New Optical Transport Capabilities
Optical/ElectronicCrossPoint
Packet Switching ASIC
1/10/40GbE Access Ports(QSFP and SFP+)
LightRail™ WDM Fabric Interconnect Ports
FlexxPorts(1/10/40GbE)
Co-Controller
Plexxi Switch 2• L1 switching via Photonic Crosspoint• L2/L3 lookup via Packet Fabric ASIC• FlexxPorts directly connected to
CrossPoint• FlexxPorts not limited to Ethernet
framing or bitrates• L1 Mirroring via CrossPoint to one or
more FlexxPorts
PLEXXISWITCH
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
12
INCREASED BANDWIDTH AND RESILIENCY
Multi-Dimensional Photonic FabricSupport for Intersecting LightRail™ Photonic Interconnects
‒ Increased cross-sectional bandwidth‒ Increased optical paths for bandwidth and
latency engineering
Increased resiliency‒ Redundant control plane paths‒ Additional optical paths for redundancy
and fast local repair
Switch 2 Concentric Ring
Interconnect
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
13
THE PLEXXI-SCALE DATA CENTER
• Multi-Dimensional Optical Fabric‒ Interconnect multiple rings via Switch 2‒ Increase cross-ring bandwidth with additional ring
cross-connects
• Optimize Bandwidth and Latency‒ Global path optimization via Plexxi Control
- Unequal-cost multipath forwarding- Wider traffic distribution than typical SPF-based
forwarding algorithms - Less internal fabric congestion / lower jitter
‒ L1 path engineering via LightRail™ Optical Fabric- maximize bandwidth and/or minimize latency
• Single Point of Control and Integration‒ Centralized interface and API via Plexxi Control
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
14
SUMMARYPlexxi Switch 2
Plexxi Switch 2s
72x 10G or 16x 40G Ports3:1 O/S
New Hardware:Dense 10G Edge
New Hardware:Multi-Dimensions
Plexxi Switch 2
No Compromise:All the Plexxiness
CONTROL SWITCH CONNECTAFFINITY
SCALE RESILIENCY FLEXIBILITY
48x 10G or 12x 40G Ports 4x LightRail™ Fabric Interfaces
1:1 O/S
04/13/2023© 2013 Plexxi, Inc. | Proprietary & Confidential |
THANK YOU
15