This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DISTRIBUTION EQUIPMENT: NEC/CEC HAZARDOUS LOCATION PANELBOARDS
NEC/CEC: Class I, Zone 1 and 2, AEx d e op pr IIB+H2 T3/T5 Gb Ex d e op pr IIB+H2 T3/T5 Gb Class I, Division 2, Groups B, C, D Class II, Division 1, Groups F, G IP66, Type 4X
Standard Materials• Enclosure:316Lstainlesssteel• Hardware:stainlesssteel• Busbar:harddrawn,tinplated,copper
Panels with QC1050N and fuses are Zone 2 rated only. Certification only applies without drain/breather. IP66, Type 4X Certification only applies with drain/breather. Cutler-Hammer is a registered trademark of Eaton Corporation. Belden is a registered trademark Belden Inc.
Panels with QC1050N and fuses are Zone 2 rated only. Certification only applies without drain/breather. IP66, Type 4X Certification only applies with drain/breather. For panels certified to -40 °C (-40 °F), enclosure size may need to increase Terminal blocks not available when fusible disconnects are used. Maximum amperage for branch breakers is 40 Amps when TB option is selected.
Options Must be listed in alphanumeric sequence at the end of the catalog number.
NEC/CEC: Class I, Zone 1 and 2, AEx d e op pr IIB+H2 T3/T5 Gb Ex d e op pr IIB+H2 T3/T5 Gb Class I, Division 2, Groups B, C, D Class II, Division 1, Groups F, G IP66, Type 4X
DISTRIBUTION EQUIPMENT: NEC/CEC HAZARDOUS LOCATION PANELBOARDS
NEC/CEC: Class I, Zone 1 and 2, AEx d e op pr IIB+H2 T3/T5 Gb Ex d e op pr IIB+H2 T3/T5 Gb Class I, Division 2, Groups B, C, D Class II, Division 1, Groups F, G IP66, Type 4X
Panels with QC1050N and fuses are Zone 2 rated only. Certification only applies without drain/breather. IP66, Type 4X Certification only applies with drain/breather 40A is the maximum amperage for 2 or 3 pole branch breaker. Fusible disconnect can only use single pole. See page 326 for Fiber Optic Connectors available. Reference the Belden or Telegartner catalog for connector type (no pigtail accessories provided) Fields are omitted from the short, abbreviated catalog numbers to save space for the ERP system.
Panels with QC1050N and fuses are Zone 2 rated only. Certification only applies without drain/breather. IP66, Type 4X Certification only applies with drain/breather Fiber splice box only provides Application -SM/OS2 UPC and ‘No accessories’(XX9N). Please refer to the latest Belden MIPP catalog for defining the MIPP Configuration.
NEC/CEC: Class I, Zone 1 and 2, AEx d e op pr IIB+H2 T3/T5 Gb Ex d e op pr IIB+H2 T3/T5 Gb Class I, Division 2, Groups B, C, D Class II, Division 1, Groups F, G IP66, Type 4X
Fiber Optic Connectors Available The below fiber option connectors are available to be used in the PlexPower Fiber panel. The ST connectors are provided by default in the standard products, however the LC and SC connectors can be used in the engineer to order product.
NEC/CEC: Class I, Zone 1 and 2, AEx d e op pr IIB+H2 T3/T5 Gb Ex d e op pr IIB+H2 T3/T5 Gb Class I, Division 2, Groups B, C, D Class II, Division 1, Groups F, G IP66, Type 4X
Panels with QC1050N and fuses are Zone 2 rated only. Certification only applies without drain/breather. IP66, Type 4X Certification only applies with drain/breather.
RCS-Frame with Main Lugs Dimensions in Millimeters (Inches)