Please note: Effective from the 1st December 2008 the list prices on ABS items are subject to a 7% increase
Please note:Effective from the 1st December 2008 the list prices on ABS items are subject to a 7% increase
32
Our long experience in plastic piping systems applications is also for your security. Approvals and third party controls are your guarantee for continuously high quality. Many of our products have the necessary approvals of the relevant institutes and thanks to batch identification they are traceable.FieldsofApplicationOur specialists are proving their wide material knowledge and their application experience every day in various industries:• Water treatment • Mining• Waste water treatment • Food• Galvanics • Refrigeration plants• Chemical industry • Cellulose and paper industry• Automotive industry • Cooling and air conditioning• Electronic industry • Shipbuilding• Energy • Beverage industry• Swimming pools • Exhaust gas cleaning• Photo industry • Textile industry
40YearsofApplicationKnowledge
ImportantNoteThe technical data given in this catalogue is for preliminary information purposes only and is published without guarantee. All pictures are for illustrative purposes only and should not be regarded as wholly accurate in every detail. We reserve the right to withdraw or to alter the specification of any product without notice. Please consult our General Conditions of Supply available upon request.
Qualityproductswithmanyadvantagesforprofessionalusers
AdvantageofQualityCompoundOur own compound and strict quality controls for each raw material delivery form the basis for GF's high quality products.ProductionKnowledgeThanks to knowledge gained over 40 years we are able to produce our products to exceptionally high tolerances.
AdvantagefortheEnvironmentIn addition to the economical advantage of ABS there are also ecological advantages:Preserving diminishing natural resourcesLess energy requiredPossibility of recyclingVery long life span
Steel Copper HDPE PVC
Energy required for 100m pressurised pipe
AdvantageofProductionQualityControlTestsPressure Pulsation Testing 1000 h TestChemical ResistanceFunctionsTemperature Cycling Test
IndependentlyaccreditedtestlaboratoryforcomponentsofplasticpipingsystemsaccordingtoSNENISO45001.
Awiderangeofproducts
PipeFittingsManualValvesActuatedValvesJointingSystemsMeasurementandControlMachinesandTools
Availableintwostandards:BS,EN/ISO/DIN.
54
AdvantageinPlanningOne-stop-shoppingforcompletesystemsMany customers prefer to purchase the complete piping system from one supplier. Because only systems that are designed to complement each other guarantee easy planning, installation and efficient functioning of the piping system.CADProductLibraryFor drawing and providing a list of orders GF's CAD Product Library is an optimal solution. It can be used with AutoCAD and other CAD systems.
AdvantageofChoosingtheRightMaterialFor maximum safety and optimal durability of a piping system the choice of raw material and pressure class of the pipe parts is highly important. The raw materials suitability to the medium can be checked with the help of our chemical resistance information.
AdvantageofInstallationTechniqueSolvent cement jointing is simple, fast, economical and very reliable.Over 100 million homogenous joints have been made over the total lifetime of piping systems, achieving the highest quality requirements.
AdvantageofSupportTrainingGF offers training courses at our Coventry headquarters and at customer's premises. For solvent cement jointing we can also supply video instruction.
WorldwideDistribution GF has a global presence and our sales offices can supply you with complete technical advice, punctual distribution and fast service in almost every corner of the world.
GFqualityisnocoincidence!
More than 40 years of research, development and experience have shaped our high standard of quality. You will find your application solution in our extensive product range.
SolventCementJointedSystems
ABSAcrylonitrileButadieneStyreneRangeofsizes:16 - 315mm, BS 3/8"- 8"
Resistantto:Alkalis, weak acids and salts.
RecommendedApplications:Low temperature brine, chilled water, refrigerants, air conditioning, drinking water, water treatment, process water, mining industry and foodstuffs.
Notrecommendedfor:High temperature uses (> 60°C) bleaches, aromatic solvents, ester, ketones and alcohols. (Always check GF chemical resistance tables)
ApplicationLimitsforPipesandFittingsinABS25 year values with Design Factor C included at 20°C water
Perm
issab
le p
ress
ure
in b
ar
Temperature in °C
PN 10
Class 9 (9 bar)
Class D (12 bar)
Class E (15 bar)
76
Contents
ABSPipe&Fittings -BS Inch
ABSPipe&Fittings -Metric
ABS ManualValves -BS Inch&Metric
Pipe 14
Pipe fittings for solvent cement jointing 15-19
Adaptor Fittings 20-22
Flanges & Flange Adaptors 23-25
Unions, Adaptor Unions & Tank Adaptors 26-29
Pipe 30
Pipe fittings for solvent cement jointing 31-36
Adaptor Fittings 37-39
Threaded Fittings 40-41
Flange Adaptors 42
Unions & Adaptor Unions 43-48
Branch Saddles 48
Type 546 Ball Valve 49-57
Ball Valves 58-61
Diaphragm Valves 62-63
Butterfly Valves 64
Check Valves 65-66
Strainers & Screen Assemblies 67-68
Variable Area Flow Meters 69-73
General Information & Abbreviations 2-13
Accessories
Pipe Clips & Spacers 74-77
Solvent Cements & Cleaners 78
Tools & Brushes 79
Backing Flanges 80-84
O-Rings & Gaskets 85-90
8 9
ABSPipingSystem
GeneralInformation
With more than 40 years experience in the development and manufacture of plastic pipe fittings, GF is a leader in respect of:
• Reliability• Safety• Durability• Uniformly high quality
ABSProductRangeABS from GF Piping Systems is a complete pressure piping system that has been available from GF since the mid 80's. GF offers 2 standard systems in ABS; Inch and Metric.
ABS is available from 3/8"-8" in the BS Inch range and from d16-d315 in the metric range. A complete range of fittings, transition fittings for metal to plastic connections, as well as a complete range of manually and actuated valves.
Example of application areas are: water treatment, airconditioning, process cooling and secondary refrigeration systems.
PropertiesABS is a styrene and acrylonitrile copolymer grafted to polybutadiene to produce a homogenous material with high impact strength, good chemical resistance and good resistance to environmental stress cracking. Other advantageous features are its suitability for use at low temperatures (-40oC) and its ease of jointing.
MaterialABS is non-toxic and meets the following:Articles in Contact with Food Regulations 1978 no. 1927. Into operation on 26th November 1979. Plastics for Food Contact Applications: "A Code of Practice for Safety in Use", issued by the British Plastics Federation in co-operation with British Industrial Biological Research Association. Revised edition 1973: updated 1981.
WRASApprovalThe material meets the requirements of the Water Regulations Advisory Scheme for testing of non-metallic materials for use with potable water. Tests are based on the effect of water quality BS 6920.
ChemicalResistanceABS is generally resistant to most diluted inorganic acids, bases and salts, and to organic acids and most animal oils and fats. It is not resistant to organic solvents such as esters, ketones, chlorinated and aromatic hydrocarbons, or to alcohol, petrol, acetic acid and vegetable oils. Where there is uncertainty about
AL Number of bolt holesANSI American National Standard InstituteCR Chloroprene Rubber, e.g. Neopren®
d Pipe outside diameterDIN German standardDN Nominal boree Wall thicknessEPDM Ethylene Propylene RubberFM Fusion MethodFPM Fluorine Rubber, e.g. Viton®
kg Weight in kilogramsG Pipe thread, not pressure tight in the thread to ISO 288HTR High Temperature ResistantISO International Standardization OrganisationMs BrassNBR Nitrile RubberNPT Taper male thread pressure tight in the thread to ANSI B 1 .20.1PA PolyamidePBTP Polybutylene therephthalatePE PolyethylenePN Nominal pressure at 20°C, waterPP Polypropylene, heat stabilisedPTFE Polytetrafluorethylene, e.g. Teflon®
PVC-C Polyvinyl Chloride, chlorinated ABS Acrylonitrile Butadiene StyrenePVDF Polyvinylidene fluorideR Taper male thread, pressure tight in the thread to ISO 7Rp Parallel female thread, pressure tight in the thread to ISO 7® Registered trade-marks Across FlatsSAN Styrene-acrylonitrileSC Size of hexagon boltsSP Standard pack. The figure given indicates the quantity of fittings contained in a standard packSt SteelTg Malleable IronTM Trade-markTr Trapezoid threadUP-GF Unsaturated Polyester resin, glassfibre reinforced
Listofabbreviations
10 11
Temp°C ClassC ClassD ClassE 10bar bar bar bar bar
-40 9.0 12.0 15.0 12.0 20 9.0 12.0 15.0 10.0 30 8.1 10.8 13.5 8.06 35 7.2 9.6 12.0 7.5 40 6.3 8.4 10.5 6.3 45 5.4 7.2 9.0 5.4 50 4.0 5.4 6.7 4.0 55 2.7 3.6 4.5 2.7 60 1.3 1.8 2.2 1.3
Temperature&PressureRelationshipTableB(Metric)
TemperatureandPressureRelationship-TableB(Inch)
Temp°C ClassC ClassD ClassE
-40 9.0 12.0 15.0 -20 9.0 12.0 15.0 0 9.0 12.0 15.0 20 9.0 12.0 15.0 30 7.5 10.0 12.5 40 6.1 8.1 10.1 50 4.6 6.1 7.7 60 3.2 4.2 5.3
bar bar bar
PressureRatingsPipe-TableC
Pressure Pressure Rating at 20oCClass Bar
B 6C 9D 12E 15
the probable behaviour of ABS when in contact with a specific chemical substance, we recommend prior consultation with our Technical Advisory Service.
TechnicalAdvisoryServiceOur specialist sales engineers will be pleased to help with the solution of technical problems and to give advisory assistance in the planning and installation of plastics pipeline systems.
The following GF plastics information manual is available on request:
Planning Fundamentals Industrial Piping Systems.
TemperatureandPressureThe permissible working temperature range for ABS pipe system is from -40oC to 60oC. The pressure ratings for the ABS fittings and valves in this catalogue are listed in Table A. Pressure ratings of pipe are shown in Table C. Pressure ratings of pipe and fittings are always quoted with, and subject to, a given temperature usually 20oC. They can be used at higher temperatures but it is a fundamental principle in plastics pipework that if the temperature is increased then the pressure must be reduced. Table B shows the maximum permissible pressures at various temperatures up to a maximum of 60oC. It will be seen that at temperatures above 20oC the recommended pressures are progressively reduced.
PressureRatingsTableAUnless indicated, the pressure ratings are as follows
Product Size PressureRating
Fittings Solvent Cement (inch) 3/8 -6 15 bar 21/2 , 5, 8 10 bar Full Face Flange 8 6 bar 45o Tee 1/2 -2 10 bar 21/2, 5 6 bar Fittings Solvent Cement (Metric) 16-225 10 bar 250-315 6 bar Flange Adaptor 225 6 bar 45o Tee 75, 140 6 bar Threaded Fittings 3/8-2 10 bar 16 bar Ball Valves Type 546 3/8-4 10 bar All Valves 16 -110 10 bar Butterfly Valves 160/6 10 bar
All pressure ratings are at 20oC
PLEASE NOTE: ABS solvent cement fittings d250 - d315 from GF are designed and tested to a nominal pressure rating of PN 6 (6 bar), with a maximum recommended operating temperature of 40oC. The cementing should be carried out very carefully according to our cementing instructions. To optimise tolerances the socket insides are machined. Due to this, surface appearance may vary, however, the quality of the resulting solvent joint is not impaired.
12 13
StandardsABS BS Inch fittings and pipe are manufactured in accordance with BS 5392 Part 1.
ABS metric fittings and pipe are manufactured in accordance with ISO 15493, additionally fittings also comply with ISO 727.
All pipe threads are in accordance with ISO 7-1: 1994
All ABS valves are manufactured in accordance with DIN 3441 Parts 1 to 4.
SolventCementsGF recommend Tangit solvent cement for jointing ABS pipe and fittings. The cement creates a chemical bond between the pipe and the fitting: it is a simple and effective method of jointing and because it is also permanent it is important to follow the correct procedure.
Joints made with TANGIT remain unaffected by almost all fluids for which ABS pipe is suitable.
ABSinSub-ZerotemperaturesAlthough ABS pipe systems are suitable for use in temperatures as low as -40oC, it is necessary, as with any other pipeline materials, to take whatever precautions may be required to prevent the line fluid freezing and consequent damage to the pipe system.
SizesSome valves in this catalogue are only available in metric sizes. If it is required to fit these valves in an inch system then metric/inch adaptor are available. For those unfamiliar with metric sizes the following note may be helpful.
In imperial systems, the sizes of pipe fittings and other components such as valves are identified throughout by reference to the nominal size of the bore of the pipe expressed in inches and fractions of an inch. In metric systems, however, sizes are identified by reference to the outside diameter of the pipe expressed in millimetres, and referred to as 'd'.
The table below shows the metric sizes which are regarded for practical purposes as being generally equivalent to imperial sizes up to 8 inches. It should, however, be understood that metric sizes are not simply inch sizes which have been converted into millimetres and called metric; their actual dimensions are different, and they are not interchangeable. There are exceptions in that 21/2" dimensions are the same as d75 and 5" dimensions are the same as d140.
IMPERIALSIZES METRICSIZES Nominalbore Pipeoutside (inch) diameter(mm)
1/4 12 3/8 16 1/2 20 3/4 25 1 32 11/4 40 11/2 50 2 63 21/2 75 3 90 4 110 5 140 6 160 8 225
14 15
ABSPipeFittingsforSolventCementJointing
d Code £ SP kg
1/2 729 001 106 6.80 - 0.024
3/4 729 001 107 7.92 - 0.043
1 729 001 108 11 .18 - 0.060
11/4 729 001 109 15.94 - 0.095
11/2 729 001 110 19.96 - 0.178
2 729 001 111 26.48 - 0.363
21/2 729 000 112 55.09 - 0.586
3 729 001 113 67.65 - 1 .232
4 729 001 115 111 .59 - 1 .890
290011 Bend90°,ABSBS Inch
d Code £ SP kg
8 729 011 120 284.47 - 5.670
29 0111 Bend90°short pattern, ABSBS Inch
d Code £ SP kg
1/2 729 001 656 7.14 - 0.025
3/4 729 001 657 9.44 - 0.042
1 729 001 658 14.06 - 0.073
11/4 729 001 659 17.37 - 0.149
11/2 729 001 660 22.86 - 0.227
2 729 001 661 42.67 - 0.578
21/2 729 001 662 48.49 - 0.182
3 729 001 663 82.64 - 1 .520
4 729 001 664 167.04 - 3.220
29 0016 LongRadius Bend90°,ABSBS Inch
• Other angles and sizes are available on request
r = 2d
r = 0.75d
ABSPipeBSInch• Dimensions: BS 5391 • Pipe length: 6m, with plain ends• Minimum order quantity 1 length
nb inch Wall (mm) Code £/m kg/m
3/8 1 .7 169 018 080 2.64 0.09
1/2 2.0 169 018 081 3.09 0.14
3/4 2.5 169 018 082 4.75 0.21
1 3.1 169 018 083 6.27 0.33
11/4 3.9 169 018 084 9.35 0.52
11/2 4.5 169 018 085 12.33 0.68
2 5.6 169 018 086 15.48 1 .06
3 8.3 169 018 088 31 .05 2.28
4 10.6 169 018 089 49.98 3.76
PipeABS,Grey,Class E,15bar (at20°C)
nb inch Wall (mm) Code £/m kg/m
6 12.8 169 018 067 97.44 6.33
PipeABS,Grey,Class D,12bar (at20°C)
nb inch Wall (mm) Code £/m kg/m
1 2.0 169 018 033 4.05 0.22
11/4 2.5 169 018 034 6.80 0.34
11/2 2.8 169 018 035 8.64 0.45
2 3.6 169 018 036 11 .63 0.70
*21/2 5.0 169 017 087 20.12 1 .13
3 5.2 169 018 038 24.06 1 .48
4 6.7 169 018 039 39.53 2.48
*5 9.1 169 017 091 77.48 3.74
6 9.9 169 018 042 78.19 5.47
8 12.7 169 018 045 140.66 9.53
PipeABS,Grey,Class C,9bar (at20°C)
nb inch Wall (mm) Code £/m kg/m
1/2 3.6 169 018 106 5.29 0.22
3/4 3.6 169 018 107 5.99 0.29
1 4.3 169 018 108 8.56 0.44
11/4 5.3 169 018 109 15.00 0.68
11/2 6.0 169 018 110 15.17 0.87
2 7.2 169 018 111 20.67 1 .31
PipeABS,Grey,Class 7(T), 12bar (at20°C)• Thick wall pipe to allow for threading
*5m length only
16 17
d Code £ SP kg
3/8 729 201 105 1 .96 - 0.018
1/2 729 201 106 2.10 - 0.026
3/4 729 201 107 2.93 - 0.035
1 729 201 108 4.05 - 0.055
11/4 729 201 109 5.83 - 0.090
11/2 729 201 110 8.56 - 0.122
2 729 201 111 13.06 - 0.209
21/2 729 200 112 22.63 - 0.530
3 729 201 113 38.11 - 0.606
4 729 201 115 55.95 - 1 .386
5 729 200 116 148.52 - 2.500
6 729 201 117 194.89 - 3.353
8 729 201 120 319.03 - 7.280
292011 Tee90°,ABSBS Inch
d Code £ SP kg
3/4-1/2 729 201 134 3.00 - 0.029
1-1/2 729 201 141 4.24 10 0.046
1-3/4 729 201 138 4.24 10 0.048
11/4-3/4 729 201 151 5.97 10 0.130
11/4-1 729 201 147 5.97 10 0.120
11/2-1/2 729 201 009 8.64 5 0.133
11/2-3/4 729 201 010 8.64 - 0.240
11/2-1 729 201 164 8.64 1 0.200
2-3/4 729 201 011 13.28 5 0.245
2-1 729 201 178 13.28 2 0.249
2-11/2 729 201 170 13.28 1 0.270
4-3 729 201 137 57.20 2 1 .440
292011 Tee90°,Reducing,ABSBS Inch
d Code £ SP kg
1/2 729 251 106 9.44 5 0.027
3/4 729 251 107 9.97 5 0.043
1 729 251 108 11 .32 5 0.072
11/4 729 251 109 13.68 5 0.119
11/2 729 251 110 17.74 5 0.203
2 729 251 111 26.14 5 0.325
21/2 729 250 112 42.13 1 0.605
5 729 250 116 251 .13 - 4.315
292511 Tee45°,ABSBS Inch
d Code £ SP kg
3/8 729 101 105 1 .64 - 0.010
1/2 729 101 106 1 .86 - 0.012
3/4 729 101 107 2.20 - 0.024
1 729 101 108 3.09 - 0.038
11/4 729 101 109 5.23 - 0.055
11/2 729 101 110 6.80 - 0.079
2 729 101 111 10.29 - 0.149
21/2 729 100 112 19.52 - 0.340
3 729 101 113 29.70 - 0.440
4 729 101 115 44.31 - 0.924
5 729 100 116 102.16 - 1 .470
6 729 101 117 177.60 - 2.835
291011 Elbow 90°,ABSBS Inch
d Code £ SP kg
3/8 729 151 105 3.09 - 0.010
1/2 729 151 106 3.55 - 0.018
3/4 729 151 107 3.62 - 0.030
1 729 151 108 4.51 - 0.035
11/4 729 151 109 6.61 - 0.046
11/2 729 151 110 8.26 - 0.056
2 729 151 111 11 .39 - 0.116
21/2 729 150 112 17.99 - 0.312
3 729 151 113 26.78 - 0.521
4 729 151 115 55.64 - 0.648
5 729 150 116 94.31 - 1 .190
6 729 151 117 115.52 - 2.044
8 729 151 120 259.32 - 3.640
291511 Elbow 45°,ABSBS Inch
d Code £ SP kg
1/2 729 151 176 6.81 - 0.015
3/4 729 151 177 8.88 - 0.029
1 729 151 178 11 .56 - 0.058
11/4 729 151 179 15.72 - 0.108
11/2 729 151 180 19.59 - 0.157
2 729 151 181 32.49 - 0.335
21/2 729 151 182 49.26 - 1 .182
3 729 151 183 67.80 - 1 .140
4 729 151 184 133.49 - 2.256
291511 LongRadius Bend45°,ABSBS Inch
• Other angles and sizes are available on request
18 19
d Code £ SP kg
1/2-3/8 729 901 334 1 .06 - 0.003
3/4-1/2 729 901 337 1 .39 - 0.004
1-1/2 729 901 342 1 .76 - 0.010
1-3/4 729 901 341 1 .76 - 0.008
11/4-1/2 729 901 348 2.11 - 0.016
11/4-3/4 729 901 347 2.11 - 0.016
11/4-1 729 901 346 2.37 - 0.016
11/2-1/2 729 901 355 2.76 - 0.024
11/2-3/4 729 901 354 2.76 - 0.025
11/2-1 729 901 353 3.10 - 0.026
11/2-11/4 729 901 352 3.10 - 0.010
2-3/4 729 901 361 3.62 - 0.060
2-1 729 901 360 4.05 - 0.044
2-11/4 729 901 359 3.62 - 0.067
2-11/2 729 901 358 4.05 - 0.036
21/2-2 729 901 364 6.52 - 0.076
3-1 729 901 374 9.28 - 0.110
3-11/2 729 901 372 10.14 - 0.135
3-2 729 901 371 11 .39 - 0.120
3-21/2 729 901 370 11 .18 - 0.133
4-3 729 901 381 15.71 - 0.238
5-4 729 901 385 40.40 - 0.450
8-6 729 901 396 104.51 - 1 .260
299013 ReducingBush,ABSBS Inch (shortpattern)
d Code £ SP kg
6 x 4 729 911 389 48.41 1 0.955
299113 ReducingBush,ABSBS Inch (long pattern)
d Code £ SP kg
3/8 729 911 105 1 .25 - 0.007
1/2 729 911 106 1 .39 - 0.007
3/4 729 911 107 1 .52 - 0.012
1 729 911 108 1 .76 - 0.020
11/4 729 911 109 3.10 - 0.035
11/2 729 911 110 3.73 - 0.046
2 729 911 111 5.22 - 0.086
21/2 729 910 112 11 .39 - 0.141
3 729 911 113 20.97 - 0.240
4 729 911 115 29.87 - 0.494
5 729 910 116 58.07 - 0.760
6 729 911 117 74.50 - 1 .470
8 729 911 120 155.60 - 2.870
299111 Socket,ABSBS Inch
d Code £ SP kg
3/8 729 961 105 1 .06 10 0.005
1/2 729 961 106 1 .32 10 0.006
3/4 729 961 107 1 .52 10 0.010
1 729 961 108 1 .75 10 0.018
11/4 729 961 109 2.91 10 0.030
11/2 729 961 110 4.48 10 0.039
2 729 961 111 5.72 5 0.077
21/2 729 960 112 14.62 - 0.115
3 729 961 113 17.20 1 0.217
4 729 961 115 26.33 1 0.560
5 729 960 116 49.43 - 0.880
299611 Cap,ABSBS Inch
d Code £ SP kg
3/8 729 901 905 1 .14 - 0.002
1/2 729 901 906 1 .26 10 0.004
3/4 729 901 907 1 .33 10 0.008
1 729 901 908 1 .81 10 0.015
11/4 729 901 909 2.46 5 0.027
11/2 729 901 910 3.33 5 0.050
2 729 901 911 4.40 10 0.098
3 729 901 913 12.57 5 0.226
4 729 901 914 16.66 2 0.476
299019 BarrelNipple,ABSBS Inch
• With solvent cement spigots on both ends • For the shortest possible distance between fittings• Overall length L = 2 x socket depth
20 21
29 9117 Adaptor BushEqual, ABSBS Inch-R
d - R Code £ SP kg
3/8-3/8 729 911 705 1 .74 10 0.007
1/2-1/2 729 911 706 2.38 10 0.014
3/4-3/4 729 911 707 2.47 10 0.021
1-1 729 911 708 3.89 10 0.028
11/4-11/4 729 911 709 5.49 10 0.042
11/2-11/2 729 911 710 7.25 10 0.070
2-2 729 911 711 10.29 5 0.126
• With solvent cement socket and taper male thread R• Connection to plastic threads only• Do not use sealing pastes that are harmful to ABS
29 9131 Adaptor Socket,ABSBS Inch-Metric
inch - d Code £ SP kg
3/8-16 729 913 105 1 .86 10 0.010
1/2-20 729 913 106 1 .86 10 0.014
3/4-25 729 913 107 1 .86 10 0.020
1-32 729 913 108 2.31 10 0.030
11/4-40 729 913 109 3.45 10 0.054
11/2-50 729 913 110 5.02 10 0.077
2-63 729 913 111 11 .39 1 0.280
3-90 729 913 113 20.82 1 0.330
4-110 729 913 115 33.71 2 0.860
• With BS inch and metric solvent cement sockets
29 9115 Adaptor SocketNipple, ABSBS Inch-R
d+d1-R Code £ SP kg
1/4+3/8-3/8 729 911 555 1 .81 1 0.007
3/8+1/2-1/2 729 911 556 1 .95 1 0.012
1/2+3/4-3/4 729 911 557 2.59 1 0.020
3/4+1-1 729 911 558 3.62 1 0.031
• With solvent cement spigot/socket reducing and taper male thread R• Connection to plastic threads only• Do not use sealing pastes that are harmful to ABS
AdaptorFittings,ABS
d - Rp Code £ SP kg
1/2-1/2 729 101 206 4.24 10 0.018
3/4-3/4 729 101 207 4.55 10 0.028
1-1 729 101 208 5.92 10 0.047
291012 Elbow 90°,ABSBS Inch-Rp
299110 Socket, ABSBS Inch-Rp
• With solvent cement socket and parallel female thread Rp• Reinforcing ring stainless A2• Connection to plastic or metal threads• Do not use sealing pastes that are harmful to ABS
d - Rp Code £ SP kg
3/8-3/8 729 911 005 3.89 10 0.014
1/2-1/2 729 911 006 3.89 10 0.021
3/4-3/4 729 911 007 4.24 10 0.021
1-1 729 911 008 5.22 10 0.042
11/4-11/4 729 911 009 8.18 10 0.056
11/2-11/2 729 911 010 9.59 10 0.091
2-2 729 911 011 12.73 5 0.140
• With solvent cement socket and parallel female thread Rp• Reinforcing ring stainless A2• Connection to plastic or metal threads• Do not use sealing pastes that are harmful to ABS
299014 AdaptorBushEqual,ABSBS Inch-Rp
d - Rp Code £ SP kg
1/2-1/2 729 901 406 2.47 10 0.009
3/4-3/4 729 901 407 3.18 10 0.014
1-1 729 901 408 4.48 10 0.026
11/4-11/4 729 901 409 5.67 10 0.046
11/2-11/2 729 901 410 7.68 10 0.073
2-2 729 901 411 10.68 5 0.126
• With solvent cement spigot and parallel female thread Rp• Connection to plastic threads only• Do not use sealing pastes that are harmful to ABS
22 23
FlangeAdaptorsABS
d Code £ SP kg
1/2 729 791 106 1 .57 10 0.008
3/4 729 791 107 1 .63 10 0.012
1 729 791 108 2.08 10 0.016
11/4 729 791 109 3.16 10 0.025
11/2 729 791 110 5.59 10 0.046
2 729 791 111 8.56 10 0.078
21/2 729 790 112 13.59 10 0.118
3 729 791 113 16.74 1 0.187
4 729 791 115 21 .70 1 0.309
5 729 790 116 49.82 1 0.527
6 729 791 117 56.34 1 0.802
8 729 791 120 117.89 1 1 .340
29 7911 FlangeAdaptor, ABS,JointingFace Serrated -BS Inch
29 8011 FlangeAdpators, ABS,JointingFace FlatBS Inch
• Counterpart: Flange Adaptor serrated No. 29 79 11
• Gasket: Flange Gasket EPDM No. 48 40 01, FPM No. 49 40 01
d Code £ SP kg
4 729 801 115 21 .70 1 0.309
6 729 801 117 56.34 1 0.802
8 729 801 120 117.89 1 1 .340
• Counterpart: Flange Adaptor with O-ring groove No. 29 81 11• Gasket: O-ring EPDM No. 48 41 01, FPM No. 49 41 01
29 8111 FlangeAdaptor, ABS,withO-RingGroove -BS Inch
d Code £ SP kg
4 729 811 115 21 .70 1 0.323
8 729 811 120 117.89 1 1 .431
• Counterpart: Flange Adaptor flat No. 29 80 11• Gasket: O-ring EPDM No. 48 40 01, FPM No. 49 41 01
d - Rp Code £ SP kg
1/2-3/8 729 901 534 2.43 1 0.015
3/4-1/2 729 901 537 2.82 1 0.024
1-3/4 729 901 541 3.77 1 0.045
1-1/2 729 901 542 3.93 1 0.045
299015 Reducing Bush (short),ABS BS Inch-Rp
299139 AdaptorNipple,ABSBS Inch-R
• With solvent cement spigot and parallel female thread Rp• Connection to plastic threads only• Do not use sealing pastes that are harmful to ABS
d - R Code £ SP kg
3/8-3/8 729 913 905 2.04 1 0.007
1/2-1/2 729 913 906 2.19 1 0.007
3/4-3/4 729 913 907 2.91 1 0.014
1-1 729 913 908 4.05 1 0.021
11/4-11/4 729 913 909 5.13 1 0.028
11/2-11/2 729 913 910 5.83 1 0.042
2-2 729 913 911 7.33 1 0.056
3-3 729 913 913 22.80 1 0.210
4-4 729 913 915 30.34 1 0.392
• With solvent cement spigot and taper male thread R• Connection to plastic threads only• Do not use thread sealing pastes that are harmful to ABS
24 25
d Code £ SP kg
1/2 729 730 006 7.67 1 0.067
3/4 729 730 007 7.78 1 0.077
1 729 730 008 8.26 1 0.100
11/4 729 730 009 9.59 1 0.118
11/2 729 730 010 11 .39 1 0.145
2 729 730 011 14.93 1 0.310
3 729 730 013 28.30 1 0.371
4 729 730 014 37.26 1 0.590
6 729 730 017 69.94 1 1 .270
29 7300 FullFaceFlange,ABSJointingFace Serrated BS Inch
• Solvent cement socket• Undrilled
It is recommended that backing rings should be used in conjunction with all Full Face Flanges.
For pressure ratings over 2 bar backing rings must be used.
All full face flanges are manufactured with outside diameters to BS 4504.
FullFaceFlanges,ABS
d Code £ SP kg
1/2 729 731 106 7.77 1 0.062
3/4 729 731 107 7.92 1 0.071
1 729 731 108 8.33 1 0.096
11/4 729 731 109 9.97 1 0.110
11/2 729 731 110 11 .63 1 0.139
2 729 731 111 15.25 1 0.201
3 729 731 113 29.31 1 0.360
4 Table E 729 731 114 38.35 1 0.576
4 Table D 729 731 164 38.35 1 0.576
6 729 731 117 67.99 1 1 .730
297311 FullFaceFlange,ABS,JointingFace Serrated BS Inch
297301/ FullFaceFlange,ABS,JointingFace 11 SerratedBS Inch
• Solvent cement socket• Drilled to BS10 Table D & E
d Code £ SP kg
1/2 729 731 106 7.77 2 0.063
3/4 729 731 107 7.92 2 0.072
1 729 731 108 8.33 2 0.098
11/4 729 730 109 997 2 0.112
11/2 729 730 110 11 .63 2 0.140
2 729 730 111 15.25 2 0.203
3 729 730 113 29.31 2 0.364
4 729 731 114 38.35 2 0.581
6 729 730 117 73.95 2 1 .218
• Solvent cement socket• Drilled to BS 4504 table NP10/16
297321/ FullFaceFlange,ABS,JointingFace 11 Serrated-BS Inch
d Code £ SP kg
1/2 729 732 106 8.08 2 0.062
3/4 729 732 107 8.18 2 0.071
1 729 732 108 8.64 2 0.096
11/4 729 731 109 9.97 2 0.110
11/2 729 731 110 11 .63 2 0.139
2 729 732 111 15.89 2 0.201
3 729 732 113 30.18 2 0.360
4 729 732 114 39.91 2 0.576
6 729 730 117 73.95 2 1 .730
• Solvent cement socket• Drilled to ANSI B16.5 Class 150
26 27
AdaptorUnions,ABSBSInch
d - Rp Code £ SP kg
1/2-1/2 729 531 306 7.03 1 0.117
3/4-3/4 729 531 307 8.08 1 0.209
1-1 729 531 308 9.82 1 0.246
11/4-11/4 729 531 309 13.59 1 0.402
11/2-11/2 729 531 310 18.07 1 0.494
2-2 729 531 311 28.04 1 0.788
295313 Adaptor Union,ABS/Malleable Iron, BS Inch-Rp
• Union Bush: Solvent cement socket ABS• Union End: Malleable iron galvanised, parallel female thread Rp• Union Nut: ABS• Gasket: O-ring EPDM No. 48 41 00
d - R Code £ SP kg
1/2-1/2 729 531 806 7.35 1 0.136
3/4-3/4 729 531 807 9.35 1 0.241
1-1 729 531 808 12.33 1 0.330
11/4-11/4 729 531 809 16.66 1 0.546
11/2-11/2 729 531 810 22.63 1 0.684
2-2 729 531 811 34.51 1 1 .019
215318 Adaptor Union,ABS/Malleable Iron, BS Inch-R• Union Bush: Solvent cement socket ABS• Union End: Malleable iron galvanised, taper male thread R• Union Nut: ABS• Gasket: O-ring EPDM No. 48 41 00
d - Rp Code £ SP kg
1/2-1/2 729 551 306 10.29 1 0.134
3/4-3/4 729 551 307 15.00 1 0.221
1-1 729 551 308 17.36 1 0.263
11/4-11/4 729 551 309 23.80 1 0.437
11/2-11/2 729 551 310 33.54 1 0.508
2-2 729 551 311 49.98 1 0.774
29 5513 Adaptor Union,ABS/BrassBS Inch-Rp
• Union Bush: Solvent cement socket ABS• Union End: Brass, parallel female thread Rp• Union Nut: ABS• Gasket: O-ring EPDM No. 48 41 00
UnionsforSolventCementJointing,ABS
d Code £ SP kg
3/8 729 511 105 6.09 - 0.017
1/2 729 511 106 7.33 - 0.028
3/4 729 511 107 7.92 - 0.046
1 729 511 108 10.68 - 0.065
11/4 729 511 109 13.06 - 0.108
11/2 729 511 110 17.99 - 0.146
2 729 511 111 23.50 - 0.256
21/2 729 510 112 56.82 - 0.461
295111 Union,ABSBS Inch• Union End: Solvent cement socket• Union Bush: Solvent cement socket• Gasket: O-ring EPDM No. 48 41 00, FPM No. 49 41 00
d Code £ SP kg
3/8 729 601 105 1 .20 - -
1/2 729 601 106 1 .26 - -
3/4 729 601 107 1 .74 - -
1 729 601 108 1 .86 - -
11/4 729 601 109 2.67 - -
11/2 729 601 110 5.30 - -
2 729 601 111 7.15 - -
296011 UnionEnd,ABSBS Inch
• Solvent cement socket
d Code £ SP kg
3/8 729 641 105 2.14 - 0.008
1/2 729 641 106 2.57 - -
3/4 729 641 107 2.67 - -
1 729 641 108 3.83 - -
11/4 729 641 109 5.13 - -
11/2 729 641 110 6.18 - -
2 729 641 111 8.33 - -
296411 UnionBush,ABSBS Inch
• Solvent cement socket
Rp Code £ SP kg
1/2 169 280 002 2.04 1 0.010
3/4 169 280 003 2.20 1 0.021
1 169 280 004 3.89 1 0.024
11/4 169 280 005 8.33 1 0.025
11/2 169 280 006 9.44 1 0.034
2 169 280 007 9.97 1 0.065
292800 Backnut,ABSBS Inch
• Parallel female thread Rp
NewDesign
NewDesign
NewDesign
28 29
Inch-d Code £ SP kg
3/8-16 729 523 105 7.15 - 0.019
1/2-20 729 523 106 7.57 - 0.030
3/4-25 729 523 107 8.08 - 0.046
1-32 729 523 108 10.68 - 0.066
11/4-40 729 523 109 13.06 - 0.110
11/2-50 729 523 110 17.83 - 0.155
2-63 729 523 111 23.50 - 0.287
295231 Adaptor Union,ABS/PVC-U,BS Inch-Metric
• Union End: PVC-U solvent cement socket - Metric• Union Bush: ABS solvent cement socket - BS Inch• Union Nut: ABS• Gasket: O-ring EPDM No. 48 41 00, FPM No. 49 41 00
TankAdaptors,ABS
d Code £ SP kg
3/8 169 250 225 32.65 - 0.073
1/2 169 250 226 38.20 - 0.131
3/4 169 250 227 54.84 - 0.194
1 169 250 228 64.75 - 0.255
11/4 169 250 229 89.55 - 0.446
11/2 169 250 230 119.45 - 0.455
2 169 250 231 134.45 - 0.674
TankAdaptor, ABSBS Inch
• End connection: Union with solvent cement socket• Gasket: Flat Gasket EPDM
d - R Code £ SP kg
3/4-3/4 729 551 807 16.34 1 0.261
1-1 729 551 808 18.69 1 0.330
11/4-11/4 729 551 809 26.33 1 0.437
11/2-11/2 729 551 810 36.21 1 0.675
2-2 729 551 811 55.95 1 1 .040
295518 AdaptorUnion,ABS/BrassBS Inch-R
• Union Bush: Solvent cement socket ABS• Union End: Brass, taper male thread R• Union Nut: ABS• Gasket: O-ring EPDM No. 48 41 00
d - Rp Code £ SP kg
3/8-3/8 729 511 205 9.44 - 0.019
1/2-1/2 729 511 206 10.83 - 0.030
3/4-3/4 729 511 207 11 .86 - 0.046
1-1 729 511 208 14.85 - 0.066
11/4-11/4 729 511 209 17.99 - 0.110
11/2-11/2 729 511 210 23.65 - 0.155
2-2 729 511 211 33.54 - 0.287
295112 AdaptorUnion,ABS/PVC-U BS Inch-Rp
• Union End: PVC-U parallel female thread Rp• Union Bush: ABS solvent cement socket • Gasket: O-ring EPDM NO. 48 41 00, FPM No. 49 41 00• Connection to plastic threads only• Do not use thread sealing pastes that are harmful to ABS
d Code £ SP kg
3/8 729 521 105 5.72 1 0.019
1/2 729 521 106 7.15 1 0.030
3/4 729 521 107 8.10 1 0.046
1 729 521 108 10.68 1 0.066
11/4 729 521 109 13.06 1 0.110
11/2 729 521 110 17.83 1 0.155
2 729 521 111 23.50 1 0.287
295211 AdaptorUnion,ABS/PVC-U,BS Inch
• Union End: PVC-U solvent cement socket• Union Bush: ABS solvent cement socket • Union Nut: ABS• Gasket: O-ring EPDM No. 48 41 00, FPM No. 49 41 00
NewDesign
30 31
ABSMetricPipeFittingsforSolventCementJointing
d Code £ SP kg
20 729 000 106 7.15 - 0.027
25 729 000 107 8.48 - 0.038
32 729 000 108 11 .63 - 0.051
40 729 000 109 16.90 - 0.194
50 729 000 110 20.97 - 0.206
63 729 000 111 27.73 - 0.387
75 729 000 112 55.09 - 0.585
90 729 000 113 70.80 - 0.750
110 729 000 114 117.09 - 2.030
140 729 000 116 216.62 - 4.100
160 729 000 117 265.62 - 5.600
29 0001 Bend90°,ABSMetric Radius = 2d
d Code £ SP kg
225 729 010 120 287.63 - 5.650
280 729 010 122 509.51 - 15.700
315 729 010 123 624.25 - 21 .200
29 0101 Bend90°,short pattern, ABSMetric
Radius = 0.75d
r = 2d
r = 0.75d
ABSPipeMetric
d Code £ / m SP kg/m
16 169 017 080 1 .14 - 0.080
20 169 017 081 1 .72 - 0.112
25 169 017 082 2.66 - 0.160
32 169 017 083 4.05 - 0.212
40 169 017 084 6.27 - 0.334
50 169 017 085 9.35 - 0.523
63 169 017 086 12.65 - 0.834
75 169 017 087 20.12 - 1 .176
90 169 017 088 24.92 - 1 .693
110 169 017 089 37.95 - 2.529
140 169 017 091 77.48 - 3.740
160 169 017 092 82.52 - 5.500
200 169 017 093 121 .00 - 7.980
225 169 017 094 169.73 - 10.870
Pipe,ABS,Nominalpressure PN10 (at20oC)
• Pipe length 5m, with plain ends
• Minimum order quantity 1 length
d Code £ / m SP kg/m
250 169 017 095 142.87 - 8.050
280 169 017 096 195.76 - 9.970
315 169 017 097 260.84 - 12.700
Pipe,ABS,NominalPressurePN6 (at20oC)
32 33
d Code £ SP kg
16 729 200 105 1 .76 10 0.010
20 729 200 106 2.10 - 0.014
25 729 200 107 2.93 10 0.024
32 729 200 108 4.05 10 0.042
40 729 200 109 5.83 - 0.074
50 729 200 110 8.56 5 0.131
63 729 200 111 13.06 - 0.250
75 729 200 112 22.63 - 0.442
90 729 200 113 38.11 - 0.755
110 729 200 114 55.95 - 1,650
140 729 200 116 148.52 - 2.500
160 729 200 117 194.89 - 3.700
200 729 200 119 298.61 - 4.430
225 729 200 120 319.03 - 6.850
250 729 200 121 489.00 - 12.500
280 729 200 122 596.18 - 18.200
315 729 200 123 732.76 - 24.700
29 2001 Tee90°,ABSMetric
d-d1-d Code £ SP kg
25-20-25 729 200 134 3.19 - 0.029
32-25-32 729 200 138 5.29 - 0.048
40-25-40 729 200 151 7.25 - 0.080
40-32-40 729 200 147 7.25 - 0.085
50-25-50 729 200 010 9.35 - 0.135
50-32-50 729 200 164 9.35 - 0.200
63-25-63 729 200 011 14.55 - 0.245
63-32-63 729 200 178 14.55 - 0.249
63-50-63 729 200 170 14.55 - 0.265
75-40-75 729 200 182 34.40 - 1 .003
90-32-90 729 200 143 57.45 - 0.943
90-63-90 729 200 146 57.45 - 2.003
110-32-110 729 200 144 84.09 - 2.000
110-50-110 729 200 136 84.09 - 1 .900
140-50-140 729 200 148 213.55 - 1 .899
140-75-140 729 200 149 213.55 - 2.500
160-90-160 729 200 158 256.91 - 2.800
200-110-200 729 200 153 429.29 - 6.110
225-110-225 729 200 156 471 .40 - 7.500
225-160-225 729 200 157 471 .40 - 7.900
292001 Tee90°reducing,ABSMetric
Items marked * are Tee 90° delivered with the required reducing bush(es)
d Code £ SP kg
16 729 100 105 1 .64 10 0.007
20 729 100 106 1 .86 10 0.010
25 729 100 107 2.20 - 0.017
32 729 100 108 3.09 10 0.032
40 729 100 109 5.23 10 0.051
50 729 100 110 6.80 5 0.103
63 729 100 111 10.29 - 0.196
75 729 100 112 19.82 - 0.308
90 729 100 113 29.70 - 0.429
110 729 100 114 44.31 - 1 .125
140 729 100 116 102.16 - 1 .470
160 729 100 117 177.60 - 2.150
200 729 100 119 262.46 - 3.372
250 729 100 121 419.15 - 9.500
291001 Elbow90°,ABSMetric
d Code £ SP kg
20 729 150 106 3.55 10 0.019
25 729 150 107 3.62 10 0.029
32 729 150 108 4.51 10 0.046
40 729 150 109 6.61 10 0.082
50 729 150 110 8.26 5 0.121
63 729 150 111 11 .39 - 0.115
75 729 150 112 17.99 - 0.200
90 729 150 113 26.78 - 0.521
110 729 150 114 55.64 - 0.775
140 729 150 116 94.31 - 1 .190
160 729 150 117 115.52 - 1 .680
200 729 150 119 201 .18 - 2.506
225 729 150 120 259.32 - 3.100
250 729 150 121 298.00 - 7.150
280 729 150 122 411 .21 - 10.800
315 729 150 123 567.78 - 14.900
291501 Elbow 45°,ABSMetric
34 35
d-d1 Code £ SP kg
20-16 729 900 334 1 .20 10 0.003
25-20 729 900 337 1 .52 10 0.005
32-20 729 900 342 1 .93 - 0.012
32-25 729 900 341 1 .93 10 0.009
40-20 729 900 348 2.57 10 0.016
40-25 729 900 347 2.57 10 0.016
40-32 729 900 346 2.57 10 0.012
50-20 729 900 355 3.35 10 0.024
50-25 729 900 354 3.35 10 0.025
50-32 729 900 353 3.35 - 0.035
50-40 729 900 352 3.35 10 0.038
63-32 729 900 360 4.32 - 0.060
63-40 729 900 359 4.32 10 0.067
63-50 729 900 358 4.32 10 0.044
75-50 729 900 365 7.92 10 0.105
75-63 729 900 364 7.92 10 0.076
90-50 729 900 372 12.42 - 0.135
90-63 729 900 371 12.42 - 0.188
90-75 729 900 370 12.42 - 0.133
110-63 729 900 378 17.14 - 0.287
110-90 729 900 376 17.14 - 0.249
140-110 729 900 385 47.85 - 0.450
160-110 729 900 390 52.40 - 0.650
160-140 729 900 388 64.84 - 0.420
200-160 729 900 392 79.37 - 0.818
225-200 729 900 181 110.42 - 1 .440
225-160 729 900 396 113.95 - 1 .640
250-225 729 900 303 266.06 - 17.00
280-250 729 900 306 287.53 - 25.00
315-280 729 900 312 305.42 - 35.50
299003 ReducingBush,ABSMetric
d-d1 Code £ SP kg
32-20 729 910 342 2.04 - 0.016
40-25 729 910 347 2.46 10 0.023
50-25 729 910 354 3.19 10 0.041
63-32 729 910 360 4.78 5 0.077
75-40 729 910 366 13.59 5 0.115
90-63 729 910 371 19.96 - 0.218
29 9103 ReducingBushLong,ABSMetric
• With spigot and solvent cement socket
d Code £ SP kg
20 729 250 106 9.44 10 0.027
25 729 250 107 9.97 10 0.043
32 729 250 108 11 .32 10 0.072
40 729 250 109 13.68 - 0.119
50 729 250 110 17.14 - 0.203
63 729 250 111 26.18 - 0.325
75 729 250 112 42.13 - 0.605
90 729 250 113 62.08 - 0.940
110 729 250 114 117.09 - 1 .870
140 729 250 116 251 .13 - 4.315
292501 Tee45°,ABSMetric
d Code £ SP kg
32 729 300 108 11 .18 - 0.070
63 729 300 111 30.09 - 0.361
293001 Cross,ABSMetric
d Code £ SP kg
16 729 910 105 1 .25 - 0.005
20 729 910 106 1 .36 - 0.007
25 729 910 107 1 .52 - 0.011
32 729 910 108 1 .76 - 0.020
40 729 910 109 3.09 - 0.045
50 729 910 110 3.73 - 0.070
63 729 910 111 5.23 - 0.130
75 729 910 112 11 .39 - 0.141
90 729 910 113 21 .38 - 0.242
110 729 910 114 29.87 - 0.570
140 729 910 116 58.07 - 0.760
160 729 910 117 74.50 - 1 .050
200 729 910 119 133.59 - 1 .480
225 729 910 120 155.60 - 2.500
250 729 910 121 249.72 - 5.450
280 729 910 122 296.67 - 6.680
315 729 910 123 354.48 - 8.300
299101 Socket,ABSMetric
36 37
ABSAdaptorFittings
d-Rp Code £ SP kg
20-1/2 729 100 206 6.26 10 0.018
25-3/4 729 100 207 6.88 10 0.028
32-1 729 100 208 8.02 10 0.047
40-11/4 729 100 209 13.42 10 0.115
50-11/2 729 100 210 19.18 10 0.147
63-2 729 100 211 24.76 5 0.233
29 1002 Elbow90°,ABSMetric-Rp
• With solvent cement socket and parallel female thread Rp• Reinforcing ring stainless A2• Connection to plastic or metal threads• Do not use thread sealing pastes that are harmful to ABS
d-Rp Code £ SP kg
20-1/2 729 910 206 4.04 10 0.020
25-3/4 729 910 207 4.82 10 0.030
32-1 729 910 208 6.18 5 0.040
40-11/4 729 910 209 7.17 10 0.069
50-11/2 729 910 210 9.50 10 0.100
63-2 729 910 211 11 .79 5 0.162
29 9102 Socket,ABSMetric-Rp
• With solvent cement socket and parallel female thread Rp• Reinforcing ring stainless A2• Connection to plastic or metal threads• Do not use thread sealing pastes that are harmful to ABS
d-Rp Code £ SP kg
20-3/8 729 910 434 3.48 10 0.012
25-1/2 729 910 437 3.88 10 0.018
32-3/4 729 910 441 5.15 10 0.027
40-1 729 910 446 7.71 10 0.048
50-11/4 729 910 452 11 .23 10 0.073
63-11/2 729 910 458 14.77 5 0.106
29 9104 ReducingBush,ABSMetric-Rp
• With solvent cement spigot and parallel female thread Rp• Reinforcing ring stainless A2• Connection to plastic or metal threads• Do not use thread sealing pastes that are harmful to ABS
d Code £ SP kg
16 729 960 105 1 .20 10 0.006
20 729 960 106 1 .43 10 0.008
25 729 960 107 1 .64 10 0.013
32 729 960 108 1 .93 10 0.020
40 729 960 109 3.09 10 0.034
50 729 960 110 5.02 10 0.034
63 729 960 111 6.18 5 0.086
75 729 960 112 14.62 - 0.115
90 729 960 113 18.69 - 0.215
110 729 960 114 28.60 - 0.480
140 729 960 116 49.43 - 0.880
160 729 960 117 70.34 - 1 .130
299601 Cap, ABSMetric
d Code £ SP kg
16 729 900 905 1 .14 - 0.003
20 729 900 906 1 .26 - 0.004
25 729 900 907 1 .33 - 0.007
32 729 900 908 1 .81 - 0.009
40 729 900 909 2.46 - 0.017
50 729 900 910 3.33 - 0.032
63 729 900 911 4.40 - 0.063
75 729 900 912 8.05 - 0.102
90 729 900 913 12.57 - 0.173
110 729 900 914 16.66 - 0.309
299009 BarrelNipple,ABSMetric
• With solvent cement spigots on both ends• For the shortest possible distance between fittings• Overall length is L = 2 x socket depth
38 39
d Code £ SP kg
16 729 960 405 1 .58 10 0.007
20 729 960 406 2.19 10 0.011
25 729 960 407 2.40 10 0.016
32 729 960 408 2.73 10 0.026
29 9604 HoseConnector,ABSMetric• With solvent cement spigot and parallel hose connection for use under pressure
d-R Code £ SP kg
16-3/8 729 910 505 2.16 10 0.009
29 9105 Adaptor Nipple, ABSMetric-R
• With solvent cement spigot and taper male thread R• Connection to plastic threads only• Do not use thread sealing pastes that are harmful to ABS
d-d1-R Code £ SP kg
16-20-1/2 729 910 556 2.33 10 0.012
20-25-3/4 729 910 557 2.71 10 0.020
25-32-1 729 910 558 2.81 10 0.031
32-40-11/4 729 910 559 3.86 10 0.050
40-50-11/2 729 910 560 5.16 10 0.070
50-63-2 729 910 561 7.71 5 0.123
299105 AdaptorSocket-Nipple,ABSMetric-R
• With solvent cement spigot/socket and taper male thread R• Connection to plastic threads only• Do not use thread sealing pastes that are harmful to ABS
d-Rp Code £ SP kg
20-1/2 729 900 406 3.97 10 0.009
25-3/4 729 900 407 4.75 10 0.014
32-1 729 900 408 5.72 - 0.026
40-11/4 729 900 409 7.15 10 0.046
50-11/2 729 900 410 9.50 10 0.073
63-2 729 900 411 11 .63 5 0.127
299004 Adaptor, ABSMetric-Rp
• With solvent cement spigot and parallel female thread Rp• Connection to plastic threads only• Do not use thread sealing pastes that are harmful to ABS
d-inch Code £ SP kg
16-3/8 729 913 105 1 .86 - 0.007
20-1/2 729 913 106 1 .86 - 0.010
25-3/4 729 913 107 1 .86 - 0.016
32-1 729 913 108 2.31 - 0.025
40-11/4 729 913 109 3.45 - 0.045
50-11/2 729 913 110 5.02 - 0.070
63-2 729 913 111 11 .39 - 0.130
90-3 729 913 113 20.82 - 0.365
110-4 729 913 115 33.71 - 0.630
299131 AdaptorSocket,ABSMetric,BS Inch
• With metric and BS Inch solvent cement sockets
40 41
R Code £ SP kg
1/2 729 961 706 3.45 10 0.008
3/4 729 961 707 4.48 10 0.028
1 729 961 708 5.22 5 0.048
299617 HoseConnectors,ABS
• With taper male thread R• Connection to plastic threads only• Do not use thread sealing pastes that are harmful to ABS
ABSThreadedFittings
R Code £ SP kg
1/2 729 911 906 2.30 - 0.011
3/4 729 911 907 2.98 - 0.017
1 729 911 908 3.84 - 0.026
299119 HexagonNipple,ABS
• With taper male thread R• Connection to plastic threads only• Do not use thread sealing pastes that are harmful to ABS
R Code £ SP kg
1/2 729 961 906 2.59 - 0.008
3/4 729 961 907 3.21 - 0.020
1 729 961 908 3.84 - 0.030
299619 Plug,ABS
• With taper male thread R• Connection to plastic threads only• Do not use thread sealing pastes that are harmful to ABS
R Code £ SP kg
3/8 729 911 505 2.25 - 0.014
1/2 729 911 506 2.89 - 0.014
3/4 729 911 507 3.62 - 0.021
1 729 911 508 4.82 - 0.035
11/4 729 911 509 6.18 - 0.053
11/2 729 911 510 6.73 - 0.031
2 729 911 511 8.64 - 0.135
3 729 911 513 22.80 - 0.196
4 729 911 515 30.49 - 0.357
299115 BarrelNipple,ABS
• With taper male thread R• Connection to plastic threads only• Do not use thread sealing pastes that are harmful to ABS
Rp Code £ SP kg
1/2 729 910 606 5.13 10 0.019
3/4 729 910 607 5.72 10 0.022
1 729 910 608 7.15 10 0.041
299106 ThreadedSocket,ABS
• With female parallel thread Rp• Connection to plastic threads only• Do not use thread sealing pastes that are harmful to ABS
42 43
ABSUnions
d Code £ SP kg
16 729 510 105 6.09 10 0.025
20 729 510 106 7.33 10 0.035
25 729 510 107 7.92 10 0.050
32 729 510 108 10.68 10 0.070
40 729 510 109 13.06 10 0.130
50 729 510 110 17.99 - 0.170
63 729 510 111 23.50 - 0.340
75 729 510 112 56.82 - 0.461
90 729 510 113 87.23 - 0.694
110 729 510 114 112.38 - 1 .069
295101 Union,ABSMetric
• Union End: Solvent cement socket• Union Bush: Solvent cement socket• Gasket: O-Ring EPDM No. 48 41 00
ABSFlangeAdaptors
d Code £ SP kg
20 729 790 106 1 .54 10 0.008
25 729 790 107 1 .58 10 0.012
32 729 790 108 1 .93 - 0.019
40 729 790 109 3.55 10 0.058
50 729 790 110 5.83 10 0.058
63 729 790 111 8.56 10 0.074
75 729 790 112 13.59 - 0.118
90 729 790 113 16.74 - 0.187
110 729 790 114 21 .70 - 0.300
140 729 790 116 49.82 - 0.527
160 729 790 117 56.34 - 0.800
200 729 790 119 60.59 - 1 .120
225 729 790 120 117.89 - 1 .300
250 729 790 121 174.50 - 1 .60
280 729 790 122 193.17 - 2.16
315 729 790 123 211 .95 - 3.32
297901 FlangeAdaptor,ABS,JointingFace
• Counter part: Flange adaptor serrated 29 79 01• Gasket: Flange gasket EPDM No. 48 40 01, FPM No. 49 40 01
SerratedMetric
44 45
d-Rp Code £ SP kg
20-1/2 729 530 306 7.03 - 0.117
25-3/4 729 530 307 8.08 - 0.209
32-1 729 530 308 9.82 - 0.246
40-11/4 729 530 309 13.59 - 0.402
50-11/2 729 530 310 18.07 - 0.494
63-2 729 530 311 28.04 - 0.788
2953 03 Adaptor Union,Malleable Iron/ABS Metric-Rp
• Union Bush: Solvent cement socket ABS• Union End: Malleable iron galvanized, parallel
female thread Rp• Union Nut: ABS• Gasket: O-ring gasket EPDM No. 48 41 00
d-R Code £ SP kg
20-1/2 729 530 806 7.35 1 0.136
25-3/4 729 530 807 9.35 1 0.241
32-1 729 530 808 12.33 1 0.330
40-11/4 729 530 809 16.66 1 0.546
50-11/2 729 530 810 22.63 1 0.684
63-2 729 530 811 34.51 1 1 .019
2953 08 Adaptor Union,Malleable Iron/ABS Metric-R
• Union Bush: Solvent cement socket ABS• Union End: Malleable iron galvanised, taper male
thread R• Union Nut: ABS• Gasket: O-ring gasket EPDM No. 48 41 00
d-Rp Code £ SP kg
20-1/2 729 550 306 10.68 1 0.134
25-3/4 729 550 307 15.64 1 0.221
32-1 729 550 308 17.99 1 0.263
40-11/4 729 550 309 24.92 1 0.437
50-11/2 729 550 310 34.40 1 0.508
63-2 729 550 311 51 .94 1 0.774
2955 03 Adaptor UnionBrass/ABS Metric-Rp
• Union Bush: Solvent cement socket ABS• Union End: Brass, parallel female threads Rp• Union Nut: ABS• Gasket: O-ring gasket EPDM No. 48 41 00
ABSAdaptorUnions
d-Rp EPDM Code £ SP kg
16-3/8 729 540 205 26.74 - 0.053
20-1/2 729 540 206 27.35 - 0.096
25-3/4 729 540 207 29.00 - 0.154
32-1 729 540 208 33.31 - 0.212
40-11/4 729 540 209 46.19 - 0.356
50-11/2 729 540 210 53.67 - 0.455
63-2 729 540 211 68.68 - 0.721
295402 Adaptor Union,StainlessSteel/ABS Metric-Rp• Union End: Stainless Steel 316L, parallel female thread Rp• Union Bush: Solvent cement socket ABS• Union Nut: ABS• Gasket: O-ring gasket EPDM No. 48 41 00
d-R EPDM Code £ SP kg
16-3/8 729 540 705 27.27 - 0.073
20-1/2 729 540 706 28.37 - 0.126
25-3/4 729 540 707 30.03 - 0.174
32-1 729 540 708 34.34 - 0.262
40-11/4 729 540 709 48.34 - 0.476
50-11/2 729 540 710 54.78 - 0.535
63-2 729 540 711 83.29 - 0.931
295407 AdaptorUnion,StainlessSteel/ABS Metric-R• Union End: Stainless steel 316L taper male thread R• Union Bush: Solvent cement socket ABS• Union Nut: ABS• Gasket: O-ring gasket EPDM NO. 48 41 00
d-d1 EPDM Code £ SP kg
16-17,2 729 545 505 31 .68 - 0,101
20-21,3 729 545 506 37.55 - 0,176
25-26,9 729 545 507 42.92 - 0,204
32-33,7 729 545 508 52.65 - 0,313
40-42,4 729 545 509 74.11 - 0,493
50-48,3 729 545 510 81 .73 - 0,566
63-60,3 729 545 511 110.02 - 0,902
295455 Adaptor Union, StainlessSteel/ABS Metric -WeldingEnd• Union End: Stainless steel 316L with welding end• Union Bush: Solvent cement socket ABS• Union Nut: Stainless steel 316L• Gasket: O-ring Gasket EPDM NO. 48 41 00
NewDesign
NewDesign
NewDesign
46 47
d-d1 Code £ SP kg
16-18 720 510 105 17.83 - 0.079
20-22 720 510 106 22.71 - 0.140
25-28 720 510 107 32.62 - 0.269
32-35 720 510 108 48.17 - 0.298
40-42 720 510 109 64.99 - 0.350
50-54 720 510 110 83.29 - 0.438
205101 AdaptorUnion,Copper forSoldering,ABS
• Union End: Copper• Union Bush: solvent cement socket ABS• Union Nut: Brass• Gasket: O-ring EPDM No. 48 41 00
d-R Code £ SP kg
20-1/2 729 550 806 10.83 - 0.152
25-3/4 729 550 807 15.71 - 0.261
32-1 729 550 808 17.99 - 0.330
40-11/4 729 550 809 25.63 - 0.437
50-11/2 729 550 810 34.81 - 0.675
63-2 729 550 811 54.22 - 1 .040
295508 AdaptorUnionBrass/ABS Metric-R
• Union Bush: Solvent cement socket ABS• Union End: Brass, taper male thread R• Union Nut: ABS• Gasket: O-ring EPDM No. 48 41 00
ABSUnionSpareParts
d Code £ SP kg
16 729 600 105 1 .20 - 0.004
20 729 600 106 1 .26 - 0.007
25 729 600 107 1 .74 - 0.012
32 729 600 108 1 .86 - 0.016
40 729 600 109 3.18 - 0.042
50 729 600 110 5.29 - 0.045
63 729 600 111 7.15 - 0.084
75 729 600 162 10.93 - 0.109
90 729 600 163 12.57 - 0.178
110 729 600 164 15.89 - 0.295
29 6001 UnionEnd, ABSMetric• Solvent cement socket
d Code £ SP kg
16 729 640 105 2.11 - 0.008
20 729 640 106 2.57 - 0.011
25 729 640 107 2.67 - 0.016
32 729 640 108 3.83 - 0.023
40 729 640 109 5.13 - 0.039
50 729 640 110 6.18 - 0.040
63 729 640 111 8.33 - 0.100
75 729 640 112 25.93 - 0.160
90 729 640 113 28.77 - 0.238
110 729 640 114 32.84 - 0.330
296401 UnionBush,ABSMetric
• Solvent cement socket• Jointing face: with O-ring groove• Gasket: O-ring EPDM No. 48 41 00, FPM No. 49 41 00
d Code £ SP kg
16 729 690 405 2.64 - 0.010
20 729 690 406 2.89 - 0.016
25 729 690 407 3.33 - 0.021
32 729 690 408 3.96 - 0.028
40 729 690 409 5.30 - 0.047
50 729 690 410 8.08 - 0.100
63 729 690 411 10.22 - 0.147
75 729 690 012 29.07 - 0.188
90 729 690 013 34.89 - 0.267
110 729 690 014 40.79 - 0.423
296904 UnionNut, ABSMetric
NewDesign
48 49
d-d1 Code £ SP kg
90-50 169 110 056 70.29 - 0.786
110-50 169 110 066 85.86 - 0.864
160-63 169 110 097 109.32 - 1 .185
225-63 169 110 117 132.76 - 1 .483
29110 Branch Saddle
• For ABS pipes• Top saddle for solvent cementing• Bottom saddle and clamps, PVC-U• Outlet with solvent cement socket
BranchSaddlesABS
inch EPDM Code £ SP kg
3/8 169 546 201 39.70 - 0.112
1/2 169 546 202 41 .23 - 0.114
3/4 169 546 203 49.05 - 0.178
1 169 546 204 58.56 - 0.258
11/4 169 546 205 74.82 - 0.457
11/2 169 546 206 96.99 - 0.642
2 169 546 207 123.33 - 1 .175
3 169 546 209 375.74 - 5.700
4 169 546 210 450.32 - 9.100
BallValveType546, ABSwithSolventCementSolventCementSocket,BS Inch
Model:
• Union type ends for easy installation and removal (z-dimension, valve end and valve nut are not compatible with Type 346)• Ball seals PTFE• Without mounting inserts
Options:
• Individual configuration of the valve (see form)• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GF
BallValvesABS
inch EPDM Code £ SP kg
3/8 169 546 241 42.20 - 0.112
1/2 169 546 242 43.92 - 0.114
3/4 169 546 243 51 .96 - 0.178
1 169 546 244 61 .73 - 0.258
11/4 169 546 245 78.29 - 0.457
11/2 169 546 246 100.81 - 0.642
2 169 546 247 127.56 - 1 .175
3 169 546 249 380.10 - 5.700
4 169 546 250 457.09 - 9.100
BallValveType546, ABSwithMounting InsertswithSolventCementSockets,BS Inch
Model:
• Union type ends for easy installation and removal (z-dimension, valve end and valve nut are not compatible with Type 346)• Ball seals PTFE• Integrated stainless steel mounting inserts
Options:
• Individual configuration of the valve (see form)• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GF
50 51
inch EPDM Code £ SP kg
3/8 169 546 221 58.96 - 0.121
1/2 169 546 222 60.49 - 0.123
3/4 169 546 223 70.05 - 0.193
1 169 546 224 80.36 - 0.273
11/4 169 546 225 99.30 - 0.480
11/2 169 546 226 124.78 - 0.665
2 169 546 227 155.20 - 1 .205
3 169 546 229 430.46 - 6.100
4 169 546 230 507.44 - 9.400
BallValveType546,ABSwithLockableHandleSolventCementSockets,BS Inch
Model:
• Union type ends for easy installation and removal (z-dimension, valve end and valve nut are not compatible with Type 346)• Ball seals PTFE• Integrated stainless steel mounting inserts• Lockable handle with ratchet settings
Options:
• Individual configuration of the valve (see form)• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GF
d EPDM Code £ SP kg
16 169 546 001 39.70 - 0.112
20 169 546 002 41 .23 - 0.114
25 169 546 003 49.05 - 0.178
32 169 546 004 58.56 - 0.258
40 169 546 005 74.82 - 0.457
50 169 546 006 96.99 - 0.642
63 169 546 007 123.33 - 1 .175
75 169 546 008 301 .18 - 3.90
90 169 546 009 375.74 - 5.700
110 169 546 010 450.32 - 9.100
BallValveType546, ABSSolventCementSockets,Metric
Model:
• Union type ends for easy installation and removal (z-dimension, valve end and valve nut are not compatible with Type 346)• Ball seals PTFE• Without mounting inserts
Options:
• Individual configuration of the valve (see form)• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GF
d EPDM Code £ SP kg
16 169 546 061 42.20 - 0.112
20 169 546 062 43.92 - 0.114
25 169 546 063 51 .96 - 0.178
32 169 546 064 61 .73 - 0.258
40 169 546 065 78.29 - 0.457
50 169 546 066 100.81 - 0.642
63 169 546 067 127.56 - 1 .175
75 169 546 068 305.53 - 3.900
90 169 546 069 380.10 - 5.700
110 169 546 070 457.09 - 9.100
BallValveType546, ABSwithMounting InsertswithSolventCementSocketsMetric
Model:
• Union type ends for easy installation and removal (z-dimension, valve end and valve nut are not compatible with Type 346)• Ball seals PTFE• Integrated stainless steel mounting inserts
Options:
• Individual configuration of the valve (see form)• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GF
52 53
d EPDM Code £ SP kg
16 169 546 081 58.96 - 0.121
20 169 546 082 60.49 - 0.123
25 169 546 083 70.05 - 0.193
32 169 546 084 80.36 - 0.273
40 169 546 085 99.30 - 0.480
50 169 546 086 124.78 - 0.665
63 169 546 087 155.20 - 1 .205
75 169 546 088 355.89 - 4.200
90 169 546 089 430.46 - 5.700
110 169 546 090 507.44 - 9.100
BallValveType546,ABSwithLockableHandleSolventCementSockets,Metric
Model:
• Union type ends for easy installation and removal (z-dimension, valve end and valve nut are not compatible with Type 346)• Ball seals PTFE• Integrated stainless steel mounting inserts• Lockable handle with ratchet settings
Options:
• Individual configuration of the valve (see form)• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GF
Rp EPDM Code £ SP kg
3/8 169 546 021 47.20 - 0.112
1/2 169 546 022 48.71 - 0.114
3/4 169 546 023 57.92 - 0.178
1 169 546 024 70.68 - 0.258
11/4 169 546 025 90.75 - 0.457
11/2 169 546 026 118.48 - 0.642
2 169 546 027 152.42 - 1 .175
BallValveType546,ABSwithMounting InsertsThreadedSockets, Rp
Model:
• Union type ends for easy installation and removal (z-dimension, valve end and valve nut are not compatible with Type 346)• Ball seals PTFE• Integrated stainless steel mounting inserts
Options:
• Individual configuration of the valve (see form)• Multifunctional module with integrated limit switches• Pneumatic or electric actuators from GF
d Code £ SP kg
16 167 484 100 21 .56 - 0.026
20 167 484 100 21 .56 - 0.026
25 167 484 101 23.49 - 0.045
32 167 484 102 24.41 - 0.045
40 167 484 103 27.43 - 0.082
50 167 484 104 31 .10 - 0.082
63 167 484 105 35.75 - 1 .104
MultifunctionalHandle 546 red (K11) with ratchetsettings, lockable
d Code £ SP kg
16/20 161 486 435 18.64 - 0.032
25/32 161 486 436 18.78 - 0.037
40/50 161 486 437 22.25 - 0.047
63 161 486 438 24.11 - 0.058
Handle Extension546 PVC-U,Metric• For Ball Valve Type 546 • For use with d25 PVC-U pipe (to be ordered separately)
inch Code £ SP kg
3/8/1/2 161 486 443 18.64 - 0.032
3/4/1 161 486 444 18.78 - 0.037
11/4/11/2 161 486 445 22.25 - 0.047
2 161 486 446 24.11 - 0.058
Handle Extension546 PVC-U, Inch BS/ASTM• For Ball Valve Type 546 • For use with 3/4" PVC-U pipe (to be ordered separately)
54 55
d DN Code £ SP kg
16 10 167 484 110 4.92 - 0.055
20 15 167 484 110 4.92 - 0.055
25 20 167 484 110 4.92 - 0.055
32 25 167 484 110 4.92 - 0.055
40 32 167 484 111 6.37 - 0.086
50 40 167 484 111 6.37 - 0.086
63 50 167 484 111 6.37 - 0.086
MountingPlate546 PP-GF (LO2)• Includes 2 mounting screws
d DN Code £ SP kg
16 10 167 482 680 3.50 - 0.055
20 15 167 482 680 3.50 - 0.055
25 20 167 482 681 3.65 - 0.070
32 25 167 482 681 3.65 - 0.070
40 32 167 482 682 6.35 - 0.080
50 40 167 482 682 6.35 - 0.080
63 50 167 482 683 7.25 - 0.120
MultifunctionalModule (IO2)PP-GFEmptyModule
• Accessory to Ball Valve Type 546 • Multifunctional module acts as a mounting kit for actuators
d DN Code £ SP kg
16 10 167 482 626 45.00 - 0.110
20 15 167 482 626 45.00 - 0.110
25 20 167 482 627 48.30 - 0.120
32 25 167 482 627 48.30 - 0.120
40 32 167 482 628 59.30 - 0.135
50 40 167 482 628 59.30 - 0.135
63 50 167 482 629 62.55 - 0.175
MultifunctionalModule (IO3)PP-GFwithmechanical limit switch;Ag,Ni
• Accessory to Ball Valve Type 546 • Multifunctional module acts as a mounting kit for actuators • Includes Plug 3P+E / Protection: IP65
NOTE: All multifunctional modules must be used with multifunctional handle
d DN Code £ SP kg
16 10 167 482 635 45.00 - 0.110
20 15 167 482 635 45.00 - 0.110
25 20 167 482 636 48.30 - 0.120
32 25 167 482 636 48.30 - 0.120
40 32 167 482 637 59.30 - 0.135
50 40 167 482 637 59.30 - 0.135
63 50 167 482 638 62.55 - 0.175
MultifunctionalModule (IO4) PP-GFwithmechanical limitswitch; Au
• Accessory to Ball Valve Type 546 • Multifunctional module acts as a mounting kit for actuators • Includes Plug 3P+E / Protection: IP65
d DN Code £ SP kg
16 10 167 482 671 243.60 - 0.110
20 15 167 482 671 243.60 - 0.110
25 20 167 482 672 246.90 - 0.120
32 25 167 482 672 246.90 - 0.120
40 32 167 482 673 257.90 - 0.135
50 40 167 482 673 257.90 - 0.135
63 50 167 482 674 261 .15 - 0.175
MultifunctionalModule (IO5) PP-GFwith inductive limitswitch; Namur
• Accessory to Ball Valve Type 546 • Multifunctional module acts as a mounting kit for actuators • Includes Plug 3P+E / Protection: IP65
d DN Code £ SP kg
16 10 167 482 662 159.15 - 0.110
20 15 167 482 662 159.15 - 0.110
25 20 167 482 663 162.40 - 0.120
32 25 167 482 663 162.40 - 0.120
40 32 167 482 664 174.45 - 0.135
50 40 167 482 664 174.45 - 0.135
63 50 167 482 665 176.65 - 0.175
MultifunctionalModule (IO6) PP-GFwith inductive limitswitch; PNP
• Accessory to Ball Valve Type 546 • Multifunctional module acts as a mounting kit for actuators • Includes Plug 3P+E / Protection: IP65
NOTE: All multifunctional modules must be used with multifunctional handle
56 57
d DN Code £ SP kg
16 10 167 482 653 159.15 - 0.110
20 15 167 482 653 159.15 - 0.110
25 20 167 482 654 162.40 - 0.120
32 25 167 482 654 162.40 - 0.120
40 32 167 482 655 175.45 - 0.135
50 40 167 482 655 175.45 - 0.135
63 50 167 482 656 176.65 - 0.175
MultifunctionalModule (IO7)PP-GFwith inductive limit switch;NPN
• Accessory to Ball Valve Type 546 • Multifunctional module acts as a mounting kit for actuators • Includes Plug 3P+E / Protection: IP65
NOTE: All multifunctional modules must be used with multifunctional handle
ConfiguratorGFBallValveType546 ABS
You will find a large selection of diffe-rent versions in our range of products. New system elements also provide you with new opportunities for use. In order for us to supply exactly the ball valve you need for your application, we put together a selection menu for you (the maximum working pressure of the whole valve is PN 10). Wesupply whatyouput together.
BallValveA01 Ball Valve 546
A01BO3 C D E F G G I K L
MaterialBO3 ABS
DimensionCO5 d 16 DN 10 3/8"CO6 d 20 DN 15 1/2"CO7 d 25 DN 20 3/4"CO8 d 32 DN 25 1"CO9 d 40 DN 32 1 1/4"C10 d 50 DN 40 1 1/2"C11 d 63 DN 50 2"C12 d 75 DN 65 2 1/2"C13 d 90 DN 80 3"C14 d 110 DN 100 4"
VersionDO1 Standard, PTFE ball sealDO4 Silicon-free, PVDF ball seal for metric (only with specific connecting parts)
SealsEO1 EPDM sealsEO2 FPM seals
ThreadedinsertsFO1 Without threaded insertsFO2 With threaded inserts
ConnectingpartsG20 ABS Cement socket metricG21 ABS Cement socket BS InchG22 ABS Threaded socket RpG23 ABS Threaded socket Rp reinforcedG40 PE-100 Fusion socket metricG41 PE-100 Butt fusion spigot SDR11 metricG42 PE-100 Butt fusion spigot SDR17.6 metric (limited dimension range)G43 PE-100 Butt fusion spigot long SDR11 metricG80 PVC-U Valve end blank
Multi-functionalmoduleIO1 No multi-functional moduleIO2 Empty moduleIO3 Module with 2 limit switches Ag, NiIO4 Module with 2 limit switches AuIO5 Module with 2 inductive switches NamurIO6 Module with 2 inductive switches PNPIO7 Module with 2 inductive switches NPN
HandleKO1 Standard handle redKO2 Standard handle blackK11 Multi-functional handle red
LeftRight
MountingplateLO1 Without mounting plateLO2 With mounting plate
58 59
BallValves
3-wayBallValveType343horizontal/L-port,ABSwithThreadedSockets -Rp
L-port Ball• Union type ends for easy installation and removal • Ball seal PTFE• Pneumatic or electric actuator available separately• Angle of operation 90o
Rp DN EPDM Code £ SP kg
3/8 10 169 343 041 80.81 - 0.156
1/2 15 169 343 042 80.81 - 0.156
3/4 20 169 343 043 90.44 - 0.285
1 25 169 343 044 108.23 - 0.388
11/4 32 169 343 045 132.71 - 0.639
11/2 40 169 343 046 143.09 - 1 .036
2 50 169 343 047 179.40 - 1 .987
3-wayBallValveType343horizontal/L-port,ABSwith SolventCementSocketsBS Inch
L-portBall• Union type ends for easy installation and removal • Ball seal PTFE• Pneumatic or electric actuator available separately• Angle of operation 90o
d DN EPDM Code £ SP kg
3/8 10 169 343 061 78.58 - 0.213
1/2 15 169 343 062 78.58 - 0.156
3/4 20 169 343 063 88.23 - 0.285
1 25 169 343 064 105.28 - 0.388
11/4 32 169 343 065 129.00 - 0.639
11/2 40 169 343 066 139.37 - 1 .036
2 50 169 343 067 174.96 - 1 .987
d DN EPDM Code £ SP kg
3/8 10 169 343 261 78.58 - 0.156
1/2 15 169 343 262 78.58 - 0.156
3/4 20 169 343 263 88.23 - 0.285
1 25 169 343 264 105.28 - 0.388
11/4 32 169 343 265 129.00 - 0.639
11/2 40 169 343 266 139.37 - 1 .036
2 50 169 343 267 174.96 - 1 .987
3-wayBallValveType343horizontal/T-port,ABSwithSolventCementSocketsBS Inch
T-portBall• Union type ends for easy installation and removal • Ball seals PTFE• Pneumatic or electric actuator available separately• Angle of operation 180o
d DN EPDM Code £ SP kg
16 10 169 343 001 73.69 - 0.213
20 15 169 343 002 73.69 - 0.156
25 20 169 343 003 83.02 - 0.285
32 20 169 343 004 99.34 - 0.388
40 32 169 343 005 120.84 - 0.639
50 40 169 343 006 130.49 - 1 .036
63 50 169 343 007 164.58 - 1 .987
3-wayBallValveType343 horizontal/L-port,ABSwithSolventCementSocketsMetric
L-port Ball• Union type ends for easy installation and removal • Ball seals PTFE• Pneumatic or electric actuator available separately• Angle of operation 90o
60 61
d DN EPDM Code £ SP kg
16 10 169 343 201 78.58 - 0.156
20 15 169 343 202 78.58 - 0.156
25 20 169 343 203 88.23 - 0.285
32 25 169 343 204 105.20 - 0.388
40 32 169 343 205 129.00 - 0.639
50 40 169 343 206 139.37 - 1 .036
63 50 169 343 207 174.96 - 1 .987
3-wayBallValveType343horizontal/T-port,ABSwithSolvent CementSocketsMetric
T-portBall• Union type ends for easy installation and removal • Ball seals PTFE• Pneumatic or electric actuator available separately• Angle of operation 180o
Rp DN EPDM Code £ SP kg
3/8 10 169 343 241 80.81 - 0.156
1/2 15 169 343 242 80.81 - 0.156
3/4 20 169 343 243 90.44 - 0.285
1 25 169 343 244 108.23 - 0.388
11/4 32 169 343 245 132.71 - 0.639
11/2 40 169 343 246 143.09 - 1 .036
2 50 169 343 247 179.40 - 1 .987
3-wayBallValveType343horizontal/T-port,ABSwithThreadedSockets -Rp
T-port Ball• Union type ends for easy installation and removal • Ball seals PTFE• Pneumatic or electric actuator available separately• Angle of operation 180o
d DN Code £ SP kg
16-20 10-15 161 483 561 19.95 - 0.160
25 20 161 483 562 20.10 - 0.170
32 25 161 483 563 20.53 - 0.280
40 32 161 483 564 23.79 - 0.400
50 40 161 483 565 24.54 - 0.055
63 50 161 483 566 25.80 - 0.010
Handle ExtensionType615, PVC-U• For Ball Valves Type 343
dxL Code £ SP kg
3/4x200 161 483 570 7.57 - 0.075
3/4x1000 161 483 571 22.69 - 0.370
Pipes,PVC-U• For Handle Extension Type 615
d DN Code £ SP kg
16/20 10/15 161 490 775 7.38 - 0.003
25 20 161 490 776 8.61 - 0.005
32 25 161 490 777 11 .12 - 0.007
40 32 161 490 778 12.30 - 0.015
50 40 161 490 779 14.76 - 0.015
63 50 161 490 780 18.46 - 0.020
Turn Limiter,PVC-U• For Type 343 horizontal, L-port
62 63
Diaphragm ValveType 315,ABSwithSolventCementSocketsBS Inch• EN 558-1 standard size• Option: Lockable handwheel, standard version not lockable• Minimum temperature: -30oC
d DN EPDM Code £ SP kg
1/2 15 169 315 632 118.62 - 0.290
3/4 20 169 315 633 132.71 - 0.440
1 25 169 315 634 166.06 - 0.710
11/4 32 169 315 635 203.13 - 1 .000
11/2 40 169 315 636 265.39 - 1 .300
2 50 169 315 637 326.19 - 2.300
1/2 15 169 315 617 58.11 - 0.290
3/4 20 169 315 618 69.10 - 0.440
1 25 169 315 619 86.75 - 0.710
11/4 32 169 315 620 104.53 - 1 .000
11/2 40 169 315 621 140.12 - 1 .300
2 50 169 315 622 170.52 - 2.300 d DN PTFE with £ SP kg EPDM Code
ABSDiaphragmValves
DiaphragmValveType315,ABSwith SolventCementSpigotsMetric• EN 558-1 standard size• Option: Lockable handwheel, standard version not lockable• Minimum temperature: -30oC
E DN PDM Code £ SP kg
20 15 169 315 432 118.62 - 0.290
25 20 169 315 433 132.71 - 0.440
32 25 169 315 434 166.06 - 0.710
40 32 169 315 435 203.13 - 1 .000
50 40 169 315 436 265.39 - 1 .300
63 50 169 315 437 326.19 - 2.300
d
20 15 169 315 417 58.11 - 0.290
25 20 169 315 418 69.10 - 0.440
32 25 169 315 419 86.75 - 0.710
40 32 169 315 420 104.53 - 1 .000
50 40 169 315 421 140.12 - 1 .300
63 50 169 315 422 170.52 - 2.300
d DN PTFE with £ SP kg EPDMCode
75 65 169 317 423 429.98 - 5.000
*90 80 169 317 024 652.37 - 8.350
*110 100 169 317 025 916.30 - 11 .600
Diaphragm ValveType317, ABSwithPP-VFlanges-Metric• En 558-1 standard size• Flanged for easy installation and removal• Sizes DN80 and DN100 with ABS fixed flange• Jointing face flat• Option: Lockable handwheel DN 65 (standard version not lockable) Sizes above DN 65 not lockable• Minimum temperature: -30oC * With ABS fixed flanges
d DN EPDM Code £ SP kg
75 65 169 317 038 733.94 - 5.000
*90 80 169 317 039 1014.16 - 8.350
*110 100 169 317 040 1344.79 - 11 .600
d DN PTFE/EPDM £ SP kg Code
d DN Code £ SP kg
20 15 167 481 943 24.36 - 0.032
25 20 167 481 943 24.36 - 0.032
32 25 167 481 944 24.83 - 0.043
40 32 167 481 945 26.24 - 0.071
50 40 167 481 945 26.24 - 0.071
63 50 167 481 946 26.72 - 0.217
75 65 167 481 946 26.72 - 0.217
Handwheelwithbuilt-in lockingmechanism
• For Diaphragm valves, Type 315 and 317 (DN 65)
*
64 65
ABSButterflyValves
d DN EPDM Code £ SP kg
90 80 169 567 004 210.18 - 1 .221
110 100 169 567 005 237.23 - 1 .805
160 150 169 567 007 425.67 - 3.128
225 200 169 567 008 600.35 - 4.936
Butterfly ValveType567,ABSlever handlewith ratchetsettings• Overall length ISO 7508• Overall length EN 558-1• Connecting dimension: BS4504 PN10 ISO 7005 PN 10 EN 1092 PN10 DIN 2501 PN10 ANSI B16.5 Class 150• Minimum temperature: -30oC
d DN EPDM Code £ SP kg
90 80 169 567 024 545.99 - 3.259
110 100 169 567 025 599.00 - 3.795
160 150 169 567 027 795.31 - 5.118
225 200 169 567 028 910.88 - 6.389
ButterflyValveType567,ABShandwheelwith reduction gear• Overall length ISO 7508• Overall length EN 558-1• Connecting dimension: BS4504 PN10 ISO 7005 PN 10 EN 1092 PN10 DIN 2501 PN10 ANSI B16.5 Class 150• Minimum temperature: -30oC
• For horizontal or vertical installation• Leakproof from: EPDM 2m, FPM 3m water column• Specific gravity of piston approx. 2 kg/dm3
• Overall length EN 558-1
ABSAngleSeatCheckValves
d DN EPDM Code £ SP kg
20 15 169 303 006 41 .53 - 0.090
25 20 169 303 007 52.37 - 0.137
32 25 169 303 008 63.05 - 0.228
40 32 169 303 009 78.06 - 0.348
50 40 169 303 010 111 .97 - 0.624
63 50 169 303 011 171 .95 - 1 .108
AngleSeatCheckValveType303, ABSwithSolventCementSpigotsMetric
d DN EPDM Code £ SP kg
3/8 10 169 360 521 49.44 - 0.105
1/2 15 169 360 522 49.44 - 0.105
3/4 20 169 360 523 59.82 - 0.175
1 25 169 360 524 63.16 - 0.271
11/4 32 169 360 525 89.70 - 0.445
11/2 40 169 360 526 101 .57 - 0.715
2 50 169 360 527 140.12 - 1 .271
BallCheck (Non-Return)ValveType360, ABSwithSolventCementSocketsBS Inch• Union type ends for easy installation and removal• Ball is sealing at a minumum water column of 1m• Vibration free even at high velocity
ABSBallCheck(Non-Return)Valves
Rp DN EPDM Code £ SP kg
3/8 10 169 360 421 57.76 - 0.105
1/2 15 169 360 422 57.76 - 0.105
3/4 20 169 360 423 68.20 - 0.175
1 25 169 360 424 72.64 - 0.271
11/4 32 169 360 425 103.05 - 0.445
11/2 40 169 360 426 117.13 - 0.715
2 50 169 360 427 163.10 - 1 .271
BallCheck (Non-Return) ValveType360, ABSwithFemaleThreaded SocketsRp• Union type ends for easy installation and removal• Ball is sealing at a minumum water column of 1m• Vibration free even at high velocity
66 67
d DN EPDM Code £ SP kg
16 10 169 360 401 49.44 - 0.105
20 15 169 360 402 49.44 - 0.105
25 20 169 360 403 59.82 - 0.175
32 25 169 360 404 63.16 - 0.271
40 32 169 360 405 89.70 - 0.445
50 40 169 360 406 101 .57 - 0.715
63 50 169 360 407 140.12 - 1 .271
BallCheck (Non-Return)ValveType360,ABSwithSolvent CementSockets Metric• Union type ends for easy installation and removal• Ball is sealing at a minumum water column of 1m• Vibration free even at high velocity
d DN EDPM Code £ SP kg
20 15 169 305 302 35.14 - 0.080
25 20 169 305 303 38.99 - 0.120
32 25 169 305 304 51 .96 - 0.180
40 32 169 305 305 64.27 - 0.280
50 40 169 305 306 86.00 - 0.470
63 50 169 305 307 108.99 - 0.780
LineStrainer Type305, ABSGreybody withSolventCementSpigotsMetric
• Protects valves, pumps etc. from becoming soiled• Easy dismantling for cleaning the screens• Cylindricalscreensmustbe ordered separately
ABSStrainers
d DN Code £ SP kg
20 15 161 486 100 6.47 - 0.002
25 20 161 486 101 8.39 - 0.004
32 25 161 486 102 8.97 - 0.006
40 32 161 486 103 10.15 - 0.009
50 40 161 486 104 12.45 - 0.014
63 50 161 486 105 13.86 - 0.022
Screen,StainlessSteel
• For line strainers Type 305
d DN Code £ SP kg
20 15 161 305 339 4.11 10 0.005
25 20 161 305 389 4.11 10 0.007
32 25 161 305 439 4.11 5 0.003
40 32 161 305 489 5.83 2 0.004
50 40 161 305 539 6.71 1 0.007
63 50 161 305 589 9.04 2 0.010
Screen,PVC-UScreenperforations 0.5mm• For line strainers Type 305
Screenperforations 0.5mm
68 69
d DN Code £ SP kg
20 15 161 305 338 4.11 10 0.005
25 20 161 305 388 4.11 10 0.007
32 25 161 305 438 4.11 5 0.003
40 32 161 305 488 5.83 2 0.004
50 40 161 305 538 6.71 1 0.006
63 50 161 305 588 9.04 2 0.009
Screen PVC-U,Screen perforations0.8mm• For line strainers Type 305
d DN Code £ SP kg
20 15 161 305 337 2.87 10 0.005
25 20 161 305 387 2.87 10 0.003
32 25 161 305 437 3.82 5 0.003
40 32 161 305 487 4.78 2 0.004
50 40 161 305 537 5.83 1 0.006
63 50 161 305 587 7.19 2 0.008
Screen Type 305, PVC-U,Screen perforations1.4mm• For line strainers Type 305
Standard VersionFloat in PVDF with ABS union ends BS Inch, EPDM seals
VariableAreaFlowMetersABSBSInch
1 198 802 814 164.58 SK10 50 - 500
1 198 802 816 164.58 SK11 100 - 1000
11/2 198 802 818 228.33 SK20 300 - 3000
11/2 198 802 820 228.33 SK21 600 - 6000
2 198 802 822 358.81 SK30 1000 - 10000
2 198 802 824 358.81 SK31 1500 - 15000
inch Code £ Type Scale range l/h Trogamid T-tube
1 198 802 815 176.43 SK10 50 - 500
1 198 802 817 176.43 SK11 100 - 1000
11/2 198 802 819 244.65 SK20 300 - 3000
11/2 198 802 821 244.65 SK21 600 - 6000
2 198 802 823 382.54 SK30 1000 - 10000
2 198 802 825 382.54 SK31 1500 - 15000
inch Code £ Type Scale range l/h Polysulfone Tube
Float in PVDF with magnet, with ABS union ends BS Inch, EPDM seals
1 198 802 826 244.65 SK100 50 - 500
1 198 802 828 244.65 SK110 100 - 1000
11/2 198 802 830 349.91 SK200 300 - 3000
11/2 198 802 832 349.91 SK210 600 - 6000
2 198 802 834 554.53 SK300 1000 - 10000
2 198 802 836 554.53 SK310 1500 - 15000
inch Code £ Type Scale range l/h Trogamid T-tube
1 198 802 827 265.39 SK100 50 - 500
1 198 802 829 265.39 SK110 100 - 1000
11/2 198 802 831 385.50 SK200 300 - 3000
11/2 198 802 833 385.50 SK210 600 - 6000
2 198 802 835 652.37 SK300 1000 - 10000
2 198 802 837 652.37 SK310 1500 - 15000
inch Code £ Type Scale range l/h Polysulfone Tube
*Note: Limit contact to be ordered separately
70 71
ShortVersionFloat in PVDF with ABS union ends BS Inch, EPDM seals
3/8 198 807 040 105.28 SK50 2.5 - 25
3/8 198 807 041 105.28 SK51 5 - 50
3/8 198 807 042 105.28 SK52 10 - 100
1/2 198 807 043 113.43 SK60 8 - 80
1/2 198 807 044 113.43 SK61 15 - 150
1/2 198 807 045 113.43 SK62 20 - 200
1 198 807 046 129.74 SK70 15 - 150
1 198 807 047 129.74 SK71 30 - 300
1 198 807 048 129.74 SK72 50 - 500
1 198 807 049 129.74 SK73 100 - 1000
inch Code £ Type Scale range l/h Polysulfone tube
Float in PVDF with magnet, with ABS union ends BS Inch, EPDM seals
3/8 198 807 050 171 .99 SK500 2.5 - 25
3/8 198 807 051 171 .99 SK510 5 - 50
3/8 198 807 052 171 .99 SK520 10 - 100
1/2 198 807 053 189.79 SK600 8 - 80
1/2 198 807 054 189.79 SK610 15 - 150
1/2 198 807 055 189.79 SK620 20 - 200
1 198 807 056 241 .68 SK700 15 - 150
1 198 807 057 241 .68 SK710 30 - 300
1 198 807 058 241 .68 SK720 50 - 500
1 198 807 059 241 .68 SK730 100 - 1000
inch Code £ Type Scale range l/h Polysulfone tube
Note: Limit contact to be ordered separately
Standard VersionFloat in PVDF with ABS union ends metric, EPDM seals
VariableAreaFlowMetersABSMetric
32 198 807 120 164.58 SK10 50 - 500
32 198 807 121 164.58 SK11 100 - 1000
50 198 807 122 228.33 SK20 300 - 3000
50 198 807 123 228.33 SK21 600 - 6000
63 198 807 124 358.81 SK30 1000 - 10000
63 198 807 125 358.81 SK31 1500 - 15000
d Code £ Type Scale range l/h mm Trogamid T-tube
32 198 807 126 176.43 SK10 50 - 500
32 198 807 127 176.43 SK11 100 - 1000
50 198 807 128 244.65 SK20 300 - 3000
50 198 807 129 244.65 SK21 600 - 6000
63 198 807 130 382.54 SK30 1000 - 10000
63 198 807 131 382.54 SK31 1500 - 15000
d Code £ Type Scale range l/h mm Polysulfone Tube
Float in PVDF with magnet, with ABS union ends metric, EPDM seals
32 198 807 132 244.65 SK100 50 - 500
32 198 807 133 244.65 SK110 100 - 1000
50 198 807 134 349.91 SK200 300 - 3000
50 198 807 135 349.91 SK210 600 - 6000
63 198 807 136 554.53 SK300 1000 - 10000
63 198 807 137 554.53 SK310 1500 - 15000
d Code £ Type Scale range l/h mm Trogamid T-tube
32 198 807 138 265.39 SK100 50 - 500
32 198 807 139 265.39 SK110 100 - 1000
50 198 807 140 385.50 SK200 300 - 3000
50 198 807 141 385.50 SK210 600 - 6000
63 198 807 142 652.37 SK300 1000 - 10000
63 198 807 143 652.37 SK310 1500 - 15000
d Code £ Type Scale range l/h mm Polysulfone Tube
*Note: Limit contact to be ordered separately
72 73
Short VersionFloat in PVDF with ABS union ends metric, EPDM seals
16 198 807 144 105.28 SK50 2.5 - 25
16 198 807 145 105.28 SK51 5 - 50
16 198 807 146 105.28 SK52 10 - 100
20 198 807 147 113.43 SK60 8 - 80
20 198 807 148 113.43 SK61 15 - 150
20 198 807 149 113.43 SK62 20 - 200
32 198 807 150 129.74 SK70 15 - 150
32 198 807 151 129.74 SK71 30 - 300
32 198 807 152 129.74 SK72 50 - 500
32 198 807 153 129.74 SK73 100 - 1000
d Code £ Type Scale range l/h mm Polysulfone tube
Float in PVDF with magnet, with ABS union ends metric, EPDM seals
16 198 807 154 171 .99 SK500 2.5 - 25
16 198 807 155 171 .99 SK510 5 - 50
16 198 807 156 171 .99 SK520 10 - 100
20 198 807 157 189.79 SK600 8 - 80
20 198 807 158 189.79 SK610 15 - 150
20 198 807 159 189.79 SK620 20 - 200
32 198 807 160 241 .68 SK700 15 - 150
32 198 807 161 241 .68 SK710 30 - 300
32 198 807 162 241 .68 SK720 50 - 500
32 198 807 163 241 .68 SK730 100 - 1000
d Code £ Type Scale range l/h mm Polysulfone tube
*Note: Limit contact to be ordered separately
VariableAreaFlowMeters-Limit Contacts
198 801 936 70.36 GK01 Limit contact bistable (min/
max for standard version)
Code £ Type Description
198 801 879 66.50 GK04 Limit contact (minimum for
short version)
198 801 878 66.50 GK03 Limit contact (maximum for short version)
74 75
d Code £ SP kg
*1/4 167 061 054 0.68 10 0.003
*3/8 167 061 055 0.72 10 0.007
*1/2 167 061 056 0.85 10 0.007
*3/4 167 061 057 0.91 10 0.008
*1 167 061 058 1 .00 10 0.009
*11/4 167 061 059 1 .35 10 0.012
*11/2 167 061 060 1 .47 10 0.022
2 167 061 061 1 .86 10 0.030
21/2 167 061 012 3.55 10 0.062
3 167 061 013 5.96 10 0.090
KLIP-ITPipeClipsType061H, PPBS Inch
• For inch pipes• Material: Clip and safety clip PP black, UV resistant
PipeClips
d Code £ SP kg
*10 167 061 003 0.68 10 0.003
*`12 167 061 004 0.68 10 0.003
*16 167 061 035 0.72 10 0.006
*20 167 061 036 0.85 10 0.007
*25 167 061 037 0.91 10 0.009
*32 167 061 038 1 .00 10 0.011
40 167 061 039 1 .35 10 0.025
50 167 061 040 1 .47 10 0.028
63 167 061 041 1 .86 10 0.047
75 167 061 012 3.55 10 0.058
90 167 061 013 5.96 10 0.090
110 167 061 014 7.04 10 0.114
125 167 061 015 9.49 10 0.174
140 167 061 016 12.09 10 0.217
160 167 061 017 13.41 10 0.237
KLIP-ITPipeClipsType061H, PPMetric
• For metric pipes• Material: Clip and safety clip PP black, UV resistant
Accessories
d inch Code £ SP kg
10-12 1/8-1/4 167 061 153 0.36 10 0.003
16 3/8 167 061 155 0.36 10 0.006
20 1/2 167 061 156 0.44 10 0.006
25 3/4 167 061 157 0.52 10 0.007
32 1 167 061 158 0.64 10 0.008
40 11/4 167 061 159 0.77 10 0.016
50 11/2 167 061 160 1 .00 10 0.017
63 2 167 061 161 1 .40 10 0.024
75 21/2 167 061 162 2.04 10 0.027
90 3 167 061 163 2.58 10 0.040
110 4 167 061 164 3.55 10 0.048
125 167 061 165 4.92 10 0.059
140 5 167 061 166 5.42 10 0.065
160 6 167 061 167 5.96 10 0.074
KLIP-ITSpacer Type061H, PP
• For pipe clips Type 061H, PP black, UV resistant
d Code £ SP kg
*10 173 061 003 0.58 10 0.003
*12 173 061 004 0.58 10 0.006
*16 173 061 005 0.72 10 0.006
*20 173 061 006 0.85 10 0.007
*25 173 061 007 0.91 10 0.009
*32 173 061 008 1 .00 10 0.012
40 173 061 009 1 .35 10 0.022
50 173 061 010 1 .47 10 0.030
63 173 061 011 1 .86 10 0.044
75 173 061 012 3.55 10 0.062
90 173 061 013 5.96 10 0.090
110 173 061 014 7.04 10 0.114
125 173 061 015 9.49 10 0.174
140 173 061 016 12.09 10 0.217
160 173 061 017 13.41 10 0.237
KLIP-ITPipeClipsType061H, PE
• For metric pipes• Material: Clip PE and safety clip PP black
76 77
d Code £ SP kg
10-12 173 061 153 0.32 10 0.003
16 173 061 155 0.32 10 0.006
20 173 061 156 0.44 10 0.006
25 173 061 157 0.46 10 0.007
32 173 061 158 0.58 10 0.008
40 173 061 159 0.69 10 0.016
50 173 061 160 0.98 10 0.017
63 173 061 161 1 .36 10 0.024
75 173 061 162 1 .86 10 0.027
90 173 061 163 2.34 10 0.040
110 173 061 164 3.22 10 0.048
125 173 061 165 4.47 10 0.059
140 173 061 166 4.94 10 0.065
160 173 061 167 6.13 10 0.074
KLIP-ITSpacer Type061H, PE
• For pipe clips Type 061H, PE
d Code £ SP kg
3 167 060 038 5.96 10 0.163
4 167 060 064 7.06 10 0.179
5 167 060 041 11 .79 10 0.309
6 167 060 067 13.53 10 0.348
8 167 060 070 23.27 - 0.612
KLIP-ITPipeClipsType060,PPBS Inch
• For inch pipes• Material: Clip and safety clip PP black, UV resistant• Pipe with flanged connections can be installed directly• Accidental opening of the safety clip is not possible• Clip and safety clip are not assembled in the packaging
d Code £ SP kg
90 167 060 038 5.96 10 0.163
110 167 060 039 7.06 10 0.179
125 167 060 040 9.59 10 0.300
140 167 060 041 11 .79 10 0.309
160 167 060 042 13.53 10 0.348
180 167 060 043 15.00 - 0.378
200 167 060 019 19.96 - 0.582
225 167 060 020 23.27 - 0.612
250 167 060 021 29.62 - 0.698
280 167 060 022 34.40 - 0.722
315 167 060 023 37.89 - 0.842
355 167 060 024 42.27 - 1 .250
400 167 060 025 45.58 - 1 .450
KLIP-ITPipeClipsType060, PPMetric
• For metric pipes • Material: Clip and safety clip PP black, UV resistant• Pipe with flanged connections can be installed directly• Accidental opening of the safety clip is not possible• Clip and safety clip are not assembled in the packaging
78 79
SolventCements
Size Code £
650g tin 799 298 022 14.06
Tangit SolventCement forABS
Size Code £
1 litre tin 799 298 010 17.14
TangitCleaningFluid forABS
Cleaners
Size Code £
16-75mm 799 495 145 179.35
32-250mm 799 495 146 229.97
ChamferingTool
ToolsandBrushes
Size Code £
KRA 63 790 109 001 56.62
25-63mm
KRA 110 790 109 002 125.96
75-110mm
KRA 160 790 109 003 152.54
110-160mm
PipeCutterKRA
Size Code £
4mm 799 299 001 1 .12
for fittings
6-10mm
8mm 799 299 002 1 .72
for fittings
12-32mm
Round Brushes
Size Code £
25x3mm 799 299 003 1 .78
for fittings
40-63mm
50x5mm 799 299 004 4.11
for fittings
75-225mm
75x6mm 799 299 005 10.53
for fittings
250-315mm
FlatBrushes
80 81
d DN inch Code £ SP kg
20 15 1/2 724 701 406 6.18 - 0.220
25 20 3/4 724 701 407 6.98 - 0.320
32 25 1 724 701 408 7.33 - 0.410
40 32 11/4 724 701 409 7.59 - 0.820
50 40 11/2 724 701 410 9.28 - 1 .040
63 50 2 724 701 411 13.12 - 1 .220
75 65 21/2 724 701 412 18.47 - 1 .400
90 80 3 724 701 413 19.96 - 1 .530
110 100 724 703 414 25.78 - 1 .840
110 100 4D 724 701 414 25.78 - 1 .840
110 100 4E 724 701 415 25.78 - 1 .840
140 125 5 724 701 416 39.78 - 2.070
160 150 6 724 701 417 43.62 - 2.330
225 200 8 724 701 419 59.17 - 2.750
247014 BackingFlanges for socket systems
• Inch & Metric sizes• Material: Galvanised mild steel• Bolt circle diameter and bolt holes: BS10: 1962, table D & E
BackingFlanges
247016 BackingFlanges for socket systems
• Inch & Metric sizes• Material: Galvanised mild steel • Bolt circle diameter and bolt holes: ISO/BS4504: 1969 PN10/16
d DN inch Code £ SP kg
20 15 1/2 724 701 606 7.05 - 0.220
25 20 3/4 724 701 607 7.33 - 0.320
32 25 1 724 701 608 8.18 - 0.410
40 32 11/4 724 701 609 8.33 - 0.820
50 40 11/2 724 701 610 10.29 - 1 .040
63 50 2 724 701 611 14.55 - 1 .220
75 65 21/2 724 701 612 19.96 - 1 .400
90 80 3 724 701 613 22.06 - 1 .530
110 100 724 700 014 28.60 - 1 .840
100 4 724 701 615 28.60 - 1 .840
140 125 5 724 701 616 39.78 - 2.070
150 6 724 701 617 47.14 - 2.330
160 150 724 700 017 47.08 - 2.510
225 200 8 724 701 620 64.59 - 1 .584
225 200 8 724 701 720 64.59 - 1 .584
PN10 8 holes
PN16 12 holes
247018 BackingFlanges for socket systems
• Inch & Metric sizes• Material: Galvanised mild steel • Bolt circle diameter and bolt holes to BS1560 1958, ANSI B16.5 Class 150
d DN inch Code £ SP kg
20 15 1/2 724 701 806 7.05 - 0.220
25 20 3/4 724 701 807 7.33 - 0.320
32 25 1 724 701 808 8.18 - 0.410
40 32 11/4 724 701 809 8.33 - 0.820
50 40 11/2 724 701 810 10.29 - 1 .040
63 50 2 724 701 811 14.55 - 1 .220
75 65 21/2 724 701 812 19.96 - 1 .400
90 80 3 724 701 813 22.06 - 1 .530
110 100 724 703 814 28.60 - 1 .840
100 4 724 701 815 28.60 - 1 .840
140 125 5 724 701 816 39.78 - 2.070
150 6 724 701 817 47.14 - 2.330
225 200 8 724 701 820 64.59 - 2.750
82 83
277014 BackingFlanges,PP-V for socket systems, all materials
• Modern full plastics flange PP-GF (30% glass fibre reinforced)• With V-groove (patent pending) which applies force evenly on collar• With integrated bolt retainers as an assembly aid• Connecting dimensions: ANSIB16.5, ASTM D 4024, BS 1560; bolt circle class 150
d DN inch Code £ SP kg
*15 1/2 727 701 406 8.07 - -
*20 3/4 727 701 407 9.04 - -
*25 1 727 701 408 11 .64 - -
*32 11/4 727 701 409 13.86 - -
*40 11/2 727 701 410 16.47 - -
*50 2 727 701 411 21 .14 - -
*65 21/2 727 701 412 23.05 - -
80 3 727 701 413 27.57 - -
110 100 4* 727 701 414 34.03 - -
160 150 6* 727 700 417 58.60 - -
225 200 8 727 700 420 85.33 - -
250 10 727 701 422 107.55 - -
300 12 727 701 423 158.27 - -
277004 BackingFlanges for socket systems
• Modern full plastics flange PP-GF (30% glass fibre reinforced)• With V-groove (patent pending) which applies force evenly on collar• With integrated bolt retainers as an assembly aid• Connecting dimensions: ISO 7005, EN 1092, DIN 2501, BS4504, bolt circle PN10
d DN inch Code £ SP kg
20 15 1/2 727 700 406 8.07 - -
25 20 3/4 727 700 407 9.04 - -
32 25 1 727 700 408 11 .64 - -
40 32 11/4 727 700 409 13.86 - -
50 40 11/2 727 700 410 16.47 - -
63 50 2 727 700 411 21 .14 - -
75 65 21/2 727 700 412 23.05 - -
90 80 3 727 700 413 27.57 - -
110 100 4* 727 700 414 34.03 - -
140 125 727 700 416 48.11 - -
160 150 6* 727 700 417 58.60 - -
225 200 8 727 700 420 85.33 - -
280 250 10 727 700 422 107.55 - -
315 300 12 727 700 423 158.27 - -
27 7002 BackingFlanges, for socket systems
Inch and Metric sizesMaterial: Polypropylene (30% fibreglass reinforced) with steel core bolt circle diameter and bolt holes: ISO/BS4504: 1969 PN10
d DN inch Code £ SP kg
20 15 1/2 727 700 206 10.22 - 0.220
25 20 3/4 727 700 207 11 .48 - 0.260
32 25 1 727 700 208 14.39 - 0.430
40 32 11/4 727 700 209 18.39 - 0.650
50 40 11/2 727 700 210 21 .45 - 0.820
63 50 2 727 700 211 24.98 - 0.940
75 65 21/2 727 700 212 28.68 - 1 .340
90 80 3 727 700 213 32.45 - 1 .400
110 100 4* 727 700 214 42.37 - 1 .560
125 110 727 700 215 42.76 - 2.590
140 125 727 700 216 61 .61 - 2.120
160 150 6* 727 700 217 80.15 - 3.390
200 200 727 700 219 115.52 - 5.850
225 200 8 727 700 220 115.52 4.410
250 250 727 700 221 149.31 8.340
280 250 10 727 700 222 149.31 5.520
315 300 12 727 700 223 216.89 7.600
355 350 727 700 224 432.21 13.960
400 400 727 700 225 490.35 17.380
Note: 4" and 6" flanges will not fit imperial PVC-U or ABS flange adaptors
Note: 4" and 6" flanges will not fit imperial PVC-U or ABS flange adaptors
Note: 4" and 6" flanges will not fit imperial PVC-U or ABS flange adaptors
84 85
277012 BackingFlanges for socket systems
Material: PP (30% fibreglass reinforced) with steel core Connecting dimension: ANSI B 16.5 Class 150
d DN inch Code £ SP kg
20 15 1/2 727 701 206 10.53 - 0.210
25 20 3/4 727 701 207 11 .94 - 0.250
32 25 1 727 701 208 15.10 - 0.420
40 32 11/4 727 701 209 17.92 - 0.670
50 40 11/2 727 701 210 21 .45 - 0.860
63 50 2 727 701 211 27.12 - 0.930
75 65 21/2 727 701 212 30.09 - 1 .340
90 80 3 727 701 213 36.16 - 1 .550
110 100 4* 727 701 214 44.31 - 1 .810
160 150 6* 727 701 217 76.53 - 3.390
225 200 8 727 701 220 111 .59 - 4.410
d inch Code £ SP kg
10 748 410 004 0.99 - -
12 748 410 004 0.99 - -
16 3/4 748 410 005 0.99 - -
20 1/2 748 410 006 1 .21 - -
25 3/4 748 410 007 1 .39 - -
32 1 748 410 008 1 .63 - -
40 11/4 748 410 009 1 .85 - -
50 11/2 748 410 010 2.04 - -
63 2 748 410 011 2.32 - -
75 21/2 748 410 014 2.68 - -
90 3 748 410 015 4.53 - -
110 4 748 410 016 5.39 - -
48 4100 O-Ring EPDM
• For unions• Hardness: 65o Shore approx.
O-ringsandGaskets
Note: 4" and 6" flanges will not fit imperial PVC-U or ABS flange adaptors
86 87
d inch Code £ SP kg
10 749 410 004 2.48 - -
12 749 410 004 2.48 - -
16 3/8 749 410 005 3.03 - -
20 1/2 749 410 006 3.15 - -
25 3/4 749 410 007 3.88 - -
32 1 749 410 008 4.70 - -
40 11/4 749 410 009 7.57 - -
50 11/2 749 410 010 8.72 - -
63 2 749 410 011 11 .23 - -
75 21/2 749 410 014 13.06 - -
90 3 749 410 015 14.85 - -
110 4 749 410 016 19.18 - -
494100 O-Ring FPM
• For unions• Hardness: 65o Shore approx.
d Code £ SP kg
12 748 400 004 0.43 - -
16 748 400 005 0.43 - -
20 748 400 006 0.56 - -
25 748 400 007 0.59 - -
32 748 400 008 0.69 - -
40 748 400 009 0.77 - -
50 748 400 010 1 .08 - -
63 748 400 011 1 .84 - -
75 748 400 012 1 .86 - -
90 748 400 013 2.32 - -
484000 FlatGaskets EPDM
• For adaptor unions• Hardness: 65o Shore approx.
d inch Code £ SP kg
16 3/8 749 410 000 3.15 - -
20 1/2 749 410 001 4.05 - -
25 3/4 749 410 007 3.88 - -
32 1 749 410 002 5.49 - -
40 11/4 749 410 003 8.93 - -
50 11/2 749 410 012 10.62 - -
63 2 749 410 013 11 .23 - -
75 21/2 749 410 014 13.06 - -
90 3 749 410 015 14.85 - -
110 4 749 410 016 19.18 - -
125 749 410 017 39.12 - -
140 5 749 410 018 43.05 - -
160 6 749 410 019 47.08 - -
200 749 410 163 47.69 - -
225 8 749 410 022 49.82 - -
250 749 410 182 55.00 - -
280 10 749 410 173 59.49 - -
315 12 749 410 174 76.70 - -
494101 O-Ring FPM
• For flange adaptors• Hardness: 65o Shore approx.
d inch Code £ SP kg
16 3/8 748 410 000 1 .20 - -
20 1/2 748 410 001 1 .20 - -
25 3/4 748 410 007 1 .39 - -
32 1 748 410 002 1 .63 - -
40 11/4 748 410 003 1 .85 - -
50 11/2 748 410 012 2.04 - -
63 2 748 410 013 2.32 - -
75 21/2 748 410 014 2.68 - -
90 3 748 410 015 4.53 - -
110 4 748 410 016 5.39 - -
125 748 410 017 5.99 - -
140 5 748 410 018 6.74 - -
160 6 748 410 019 7.92 - -
200 748 410 163 9.18 - -
225 8 748 410 022 9.35 - -
250 748 410 182 28.68 - -
280 10 748 410 173 30.09 - -
315 12 748 410 174 33.64 - -
484101 O-Ring EPDM
• For flange adaptors• Hardness: 65o Shore approx.
88 89
d inch Code £ SP kg
16 3/8 748 400 014 0.43 - -
20 1/2 748 400 015 0.56 - -
25 3/4 748 400 016 0.59 - -
32 1 748 400 017 0.69 - -
40 11/4 748 400 018 0.77 - -
50 11/2 748 400 019 1 .08 - -
63 2 748 400 020 1 .84 - -
75 21/2 748 400 021 1 .86 - -
90 3 748 400 022 2.32 - -
110 4 748 400 023 3.15 - -
125 748 400 024 3.61 - -
140 6 748 400 025 4.70 - -
160 7 748 400 026 4.82 - -
200 748 400 031 5.50 - -
225 9 748 400 027 9.91 - -
280 10 748 400 032 13.19 - -
315 12 748 400 033 14.85 - -
484001 FlangeGaskets EPDM
• For flange adaptors• Hardness: 65o Shore approx.
d Code £ SP kg
20 749 400 015 1 .50 - -
25 749 400 016 1 .86 - -
32 749 400 017 3.24 - -
40 749 400 018 6.98 - -
50 749 400 019 8.88 - -
63 749 400 020 11 .23 - -
75 749 400 021 16.34 - -
90 749 400 022 21 .30 - -
110 749 400 023 36.62 - -
140 749 400 025 52.40 - -
160 749 400 026 91 .95 - -
225 749 700 027 158.74 - -
494001 FlangeGaskets - FPM
• For flange adaptors• Hardness: 65o Shore approx.
d Code £ SP kg
1/2-16 748 400 030 0.28 - -
3/4-20 748 400 005 0.43 - -
1-25 748 400 006 0.56 - -
484002 Flat Gaskets EPDM
• For tap connector No. 21 55 03• Hardness: 65o Shore approx.
Size Code £ SP kg
1/2 748 401 006 2.11 1 0.031
3/4 748 401 007 2.19 1 0.037
1 748 401 008 2.57 1 0.037
11/4 748 401 009 3.00 1 0.041
11/2 748 401 010 4.05 1 0.055
2 748 401 011 4.48 1 0.056
3 748 401 013 6.18 1 0.098
4 Table E 748 401 014 9.04 1 0.112
4 Table D 748 401 064 9.04 1 0.112
6 748 401 017 14.45 1 0.162
484010 FlatGasket for FullFaceFlangesEPDM drilled toBS10 tables D &E
Size Code £ SP kg
1/2 748 401 006 2.11 1 0.031
3/4 748 401 007 2.19 1 0.037
1 748 401 008 2.57 1 0.037
11/4 748 401 109 3.00 1 0.041
11/2 748 401 110 4.05 1 0.055
2 748 401 111 4.86 1 0.056
3 748 401 113 6.35 1 0.098
4 748 401 014 9.04 1 0.112
6 748 401 117 14.45 1 0.162
484011 FlatGasket for FullFaceFlangesEPDM drilled to ISO/BS4504 NP10/16
Size Code £ SP kg
1/2 748 401 206 2.19 1 0.031
3/4 748 401 207 2.57 1 0.037
1 748 401 208 4.86 1 0.037
11/4 748 401 009 3.00 1 0.041
11/2 748 401 010 4.05 1 0.055
2 748 401 211 4.86 1 0.056
3 748 401 213 6.35 1 0.098
4 748 401 214 9.04 1 0.112
6 748 401 117 14.45 1 0.162
484012 FlatGasket for FullFaceFlangesEPDM drilled toBS1560:1958, (ANSI B16.5 Class150)
90
Size Code £ SP kg
1/2 749 401 006 14.93 1 0.031
3/4 749 401 007 17.14 1 0.037
1 749 401 008 21 .22 1 0.037
11/4 749 401 009 23.38 1 0.041
11/2 749 401 110 27.90 1 0.055
2 749 401 111 35.91 1 0.056
3 749 401 113 51 .24 1 0.098
4 749 401 014 69.64 1 0.112
6 749 401 117 113.95 1 0.162
494011 FlatGasket forFull FaceFlanges FPM drilled to ISO/BS4504 NP10/16
Size Code £ SP kg
1/2 749 401 206 14.93 1 0.031
1 749 401 208 21 .22 1 0.037
11/4 749 401 009 23.58 1 0.041
11/2 749 401 010 27.90 1 0.055
2 749 401 211 35.85 1 0.056
3 749 401 213 51 .24 1 0.098
4 749 401 214 69.64 1 0.112
6 749 401 117 113.95 1 0.162
494012 FlatGasket forFull FaceFlanges FPM drilled toBS1560:1958, (ANSIB16.5 Class150)
All flat gaskets for full face flanges are manufactured with Outside Diameter to BS 4504.
Size Code £ SP kg
1/2 749 401 006 14.93 1 0.031
3/4 749 401 007 17.14 1 0.037
1 749 401 008 21 .22 1 0.037
11/4 749 401 009 23.58 1 0.041
11/2 749 401 010 27.20 1 0.055
2 749 401 011 35.91 1 0.056
3 749 401 013 51 .24 1 0.098
4 Table E 749 401 014 69.64 1 0.112
4 Table D 749 401 064 69.64 1 0.112
6 749 401 017 113.95 1 0.162
494010 FlatGasket forFull FaceFlanges FPM drilled toBS10 tablesD&E
Stockist
George Fischer Sales LimitedParadise Way, Coventry CV2 2STTel. 024 7653 5535, Fax. 024 7653 0450email [email protected] website www.georgefischer.co.uk
LITGF0682 (Jan 08) © George Fischer Sales Limited.