PlayStation 2 Slimline SCPH-7500x Fan Replacement · PlayStation 2 Slimline SCPH-7500x Fan Replacement This is a step-by-step guide on how to replace and install the fan in the PlayStation
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PlayStation 2 Slimline SCPH-7500x FanReplacement
This is a step-by-step guide on how to replace and install the fan in the PlayStation 2 Slimline.
Paso 1 — Removing Playstation 2 Slimline SCPH-7500x Outer Shell
Turn off the PlayStation 2 (or PS2) and carefully unplug from the power source. Check to see thereare no discs inside the console before flipping the game system upside-down.
Paso 2
Locate the six feet on the bottom ofthe PS2.
Five of the feet are in plain sight andone of the feet is located under theblack void sticker on the bottom ofthe device.
IMPORTANT: Removing the blackVOID sticker will void the warrantyof this device. Proceed at your ownrisk
Some versions of the console, suchas the PAL Version, may not havethis sticker. In this case, the foot oreven the screw should be in plainsight.
Once all of the screws have been removed, pull apart the top plastic cover from the bottom plasticcover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the oppositeside to fully separate. It will take force to pull apart the two halves.
Paso 8
If done correctly, you should have afully detached plastic backing,revealing the electronic componentsof the PlayStation 2.