Updated 13.04.2021 All specifications are subject to change without notice. While all care has been taken, Weldclass accepts no responsibility for any inaccuracies, errors or omissions in this document or attachments. Any comments regarding intended application are for description and identification purposes only. It is the sole responsibility of the user and/or owner and/or purchaser to select the appropriate product for their intended purpose and to ensure that the product selected is capable of performing correctly and safely in the intended application. E.&O.E. www.weldclass.com.au Page 1 of 3 Platinum LT40 LPG Burner Torch System More Info Impressive Output Up to 500mj/h (475,000 BTU) & 1,200mm flame length Unique Swivel Joint Eliminates hose torsion/tension 5/8: UNF Standard/common connections Flame Controls Pilot adjustment + Heating flame adjustment + Squeeze trigger H/Duty Handle Screwless Single-piece molded design Up to 500mj/hr (475,000 BTU) output Choice of 3 kits (see next page) Premium Packaging All kit supplied in single package/carton with display card Weed Burning Use with standard 4/9/45kg LPG bottle Water-Proofing, Drying & Thawing Heat Shrinking/ Wrapping Bitumen Heating & Concrete Curing Metal Heating & Weld Pre-heating Torch Lengths 1,000mm & 600mm
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Updated 13.04.2021
All specifications are subject to change without notice. While all care has been taken, Weldclass accepts no responsibility for any inaccuracies, errors or omissions in this document or attachments. Any comments regarding intended application are for description and identification purposes only. It is the sole responsibility of the user and/or owner and/or purchaser to select the appropriate product for their intended purpose and to ensure that the product selected is capable of performing correctly and safely in the intended application. E.&O.E.
www.weldclass.com.au Page 1 of 3
Platinum LT40LPG Burner Torch System
MoreInfo
Impressive OutputUp to 500mj/h (475,000 BTU)& 1,200mm flame length
All specifications are subject to change without notice. While all care has been taken, Weldclass accepts no responsibility for any inaccuracies, errors or omissions in this document or attachments. Any comments regarding intended application are for description and identification purposes only. It is the sole responsibility of the user and/or owner and/or purchaser to select the appropriate product for their intended purpose and to ensure that the product selected is capable of performing correctly and safely in the intended application. E.&O.E.
All specifications are subject to change without notice. While all care has been taken, Weldclass accepts no responsibility for any inaccuracies, errors or omissions in this document or attachments. Any comments regarding intended application are for description and identification purposes only. It is the sole responsibility of the user and/or owner and/or purchaser to select the appropriate product for their intended purpose and to ensure that the product selected is capable of performing correctly and safely in the intended application. E.&O.E.
www.weldclass.com.au Page 3 of 3
Technical Data
Torch LengthWith 400mm Tube With 750mm Tube
600mm 1,000mm
OutputSet-Up With Regulator @ 400kpa Without Regulator @ 800kpa
Tip Size
Heat / Energy Output
Max Flame Length (mm)
Gas Consumption
50mm 65mm 65mm
185 Mj/hr 390 Mj/hr 500 Mj/hr
175,000 BTU 370,000 BTU 475,000 BTU
750mm 1,000mm 1,200mm
3.7 Kg/hr 7.75 Kg/hr 9.9 Kg/hr
With Regulator @ 400kpa(Combo Kit)
Without Regulator @ 800kpa(Maxflame Kit)
Connections / Threads
Regulator/Cylinder Adaptor Inlet POL Fitting
Regulator/Cylinder Adaptor Outlet 5/8” UNF LH Male
Hose Fittings 5/8” UNF LH Female
Torch Handle Inlet 5/8” UNF LH Male
Torch Handle Outlet M14x1 RH Male
Tube Inlet M14x1 RH Female
Tube Outlet M20x1 RH Male
Tip Inlet M20x1 RH Female
Regulator Spec. Output 0-400 kpa. 60mm diaphragm
Hose Spec. 6mm I.D., max 2,000 kpa working pressure