Plate heat exchangers
Plate heat exchangers
1
Energy Saving.Recuperator heat recovery units offervarious possibilities for energy savingand an alternative for reducing energycosts and atmospheric pollution.
Characteristics.Heat-exchangers are exchangers thatenable heat to be transferred betweenthe input and the output air-flows basedon the difference in temperature.Recuperator offer two series of staticplate exchangers (Series B and F) anda rotary exchanger series (Series T),whose characteristics meet the require-ments of both the industrial and thenon-industrial markets.
Reliability and High Performance.The plate type are air-to-air heat-exchangers that have no moving parts,offering very high reliability andperformance; in addition, they make forlow energy consumption in associatedboiler equipment.The heat is transmitted directly from thehigher to the lower temperature-flow;the air-flow pattern is of cross-flowdesign, and the exchanger's efficiencyis between 40 and 75%.
Sealing.This type of heat-exchanger consists offlat plates with swirl control, whosespacing depends on the type ofapplication.The exhaust and supply air-flows arecompletely separated by means ofspecial seals.
Materials.The plates are usually made ofaluminium, due to the latter's corrosion-resistance, ease of manufacture, non-inflammability, and durability. In specialcases, such as the presence ofcorrosive parts, the aluminium can becoated with anti-corrosion paint, while,in the case of high operatingtemperatures or special applications,stainless steel alloys are used.
Condensation.Plate-type exchangers do not allow forthe passage of humidity from one flowto another, but can transfer part of thelatent heat contained in the wetexhaust air-flow; this happensespecially when external temperaturesare very low, so that the supply aircools the wet exhaust below its dewpoint and condensation is formed.
Introduction
2
It is Recuperator's constant aim tomaintain the highest standards ofquality. Stated performance figures arecertified by tests carried out inaccordance with Eurovent rules byindependent organizations such asTechnikum of Lucerne (Switzerland)and Istituto Ricerche e Collaudi Masiniof Rho (Milan).The quality and performance ofRecuperator products are guaranteedby a well-equipped research laboratoryand an ASHRAE wind-tunnel, wheretests are conducted periodically onproduct lines.
All supplies of aluminium coils arechecked and tested using our Erichsentest equipment, in accordance with DINStandard 50 101. Checks are repeatedduring and at the end of themanufacturing process so that thephysical characteristics of the materialsused are continuously monitored.
Quality
Air-conditioningVentilation
Areas
Schools
Swimming-pools
Hospitals
Telephony
Railways
Ventilation hoods
Dryers
Rotogravure printing machines
Heat recovery from flue gases
3
MaterialSeries
The table gives a few examples ofapplications relating to series andmaterials used by Recuperator.
Pre-heating and pre-cooling in the air-handling units
ApplicationBF
Aluminium
Heat recovery from air renewal (B Aluminium)B Aluminium
Pre-heating of air in air-handling unitsBF
Coated aluminium
Heat recovery from the exhaust air withoutmixing of the two air-flows
BF
Aluminium and stainless-steel
Heat dissipation inside shelters and mobiletelephone cabins
B B Aluminium and coated aluminium
Heat dissipation inside converters for air-conditioning in railway carriages
BF
Aluminium
Heat recovery from flue gases for heatingpremises
BF
B Aluminium and coated aluminium
Pre-heating of air inside dryers and heating ofpremises
BF
Aluminium and stainless-steel
Heat recovery from solvents and heating ofpremises
BF
Aluminium and stainless-steel
Heat recovery for pre-heating the air at entranceto burners and heating of premises
BF
Stainless steel
Examples of Applications
4
07=Modelfrom 02 to 24
AL= Plate materialAL: AluminiumAC: Coated aluminiumI6: AISI 316L
N=Temperature rangesN: -30°C+90°C polyurethane/epoxy resinD: -30°C+150°C silicon/epoxy resinV: -30°C+200°C silicon/epoxy resinX: -30°C+280°C siliconY: -30°C+500°C refractory silicon
F=SeriesBF
x=Trading group
T=VersionT: StandardS: Stock cubes
SC BP25=Options
090= Net length of finned unit(cm) (step 10 mm)
M=Spacing between platesC: Close-fittingM: MediumL: Large
Product Code
F x AL 07 N 090 M T SC BP25
general informationfor specifications see Page 8SC SMNSTVXS AZCPCSRF
by-passfor specifications see Page 9BSBPBZBCBABBBLBVBP.. BP..
07=Modelfrfrfrfrfrrfrfrfrrffrfrfrfrfrrrrrooooomooooooooooo 02 to 24
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAALLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL= PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPllllllllllllate materiiiiiiiiiiaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaallllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllAALAAALAAAAAAALAAAAAAAAALLLLLALLAAAALAALAALLLLALLLAALALAAAALLALALALALALALALAALLLALLALAAALALAAALLLALLALALALAAAALAALAALALALLALALAAAAAALALLAAAALAAAAAALAAAAAAAAAAAAAAA AAAA: AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA:: AAA: A:: AAAA: A: A::::: A: A: A: AA: A: AA: A: A: AAAAAA: AAA::: A: A: AA: AAA:: A: A: AAA: AAA: AAAAAA: A: AAA:: AAAAAAAlllulllllllllllllluluulululuuuullluluuuuuuullluuuluuulluulullllullululluuuluuluuuumimmmmmmmmimmmmimimimmmmmmmmimimmmimmimmimmmimmmim ninnininininnnninnninninnnnnnnninnnninininnnnnniinninnniiumumumumumumumumumumummummmmumuumumummummmmumumumumuuuuummmmumummmmmmumumuuummummmmumumumumuummmmummumuumummumumuumumuummummuuuuuuuuuummmACACACACACACACCACACACACCACAACAACACACCACACACACACAACAAACAACCCACCCCCACACAACACACCCACAACAACCACACCCAAACACACACAACCACACCCAACACCCCAAACACAAAACCCCAACAACCCCCC: C: C: C: CCC: C: C: C: CC:: CCCCC: C: CCCCCCCCCCCCCCCCC: C: C: CCC: CC: CCCCCC: CCCCCC: CCoaoaoaoaoaoaoaoaoaoaoaoaoaoaoaoaooaoaoaaoaooooaoaaaaoaoaooaoaaaoaooaoaaoaaaaaaaatetetetetetttttettttetetttetttttetetetttttetetttttetetetetetttettteetetteteteeetettetetttetettttetttted dddddddddddddddd d d dd ddd d ddddd dddddddddddddddddddddddd alalaaalalalalalalalalaaaalaalaallaaaaaaallaaallaaalaalalalaalllaaaaaaaaaaaaalaaa umuumumuumuumumumumumumumuuuuummumuuummumummmmuummummmmmmmmuuu iniumI6III666666666I6III666666III666666666I666I6III66I66666I666II6II666666666I6I6I6I6666666666I6III66666666II6666666I6II666666II666III66666III66666666 A: AAAAAAAA: AAAAAAAAA: AAAAA::::::::::::::::::: ISISISSSSSSSISISSSSSSSSSSI 331313131113316L6L666666666L6LLLLL6LL6L6L6666666LLLLL6L6LL
FFFFFFFFFFFFFFFFFFFFFFFF=SSSSSSSSSSSSSeriesBBBBBBBBBBBBBBBBBBBBBBBBBBBBBFFFFFFFF
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx=======================================TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrraaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaadddddddddddddddddddddddddddddddddddddddiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiinnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnngggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg groupppppppppppppppppppppppppggggggggggggggggg g pppp
TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT=============================================VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVersssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssiiiiiiiiiiiiiiiiiiiiiionT: StandardS: Stock cubes
SC BP25=Opppppppppppppppppppppppppppppppppppppppppptttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttiiiiiiiiiiiiiiooooooooooooooooooooooooooooonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnsssssssssssssssssssssssssssssssssssssssssssssssssssssssssssppp
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000099999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000======================================================= NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeettttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttt lllllllllllllllllllllllllllllllllllllllllleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnngth of finnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnneeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeedddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd gunit(cm) (step 10 mm)
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM=SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSpppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccinnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeettttttttttttttttttttwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwweeeeeeeeeeeeeeen pppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppllllllllllllllllllllllllllllllllllllaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaatttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttteeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeesssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssp g pppppppppppppppC:C:C:C:::C:C:C:C::C:C:C:::C:C:C:C::C:C:C:CCC:CCC:CC:C:C:CCCCCCCCCCCCCC:C::C:C ClClososoososoosoooooososooosososooososooossooososoooossoosooossooosossoooooosssosoooossse-fifiiitttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttt ingM:M:M:M:MMMMMM:M:MMMMM:MMMM:MMMMMM:MMMM:MMMMMMMMM:M:MMM:M:MMMM:MM MeMeMeMeMMMMMeMMMeMeMeMMMeMMeMeMMMMMeMeMMeMeMeMeMMMMMMMMMMeMMMMMMeMMMeMMMMMMMMeMMeMMMeMMMMeeMeM ddddddidddddddddddddddddddddddddddddddddddddddd ummmmmmmmmmmmmmmmmL:L::LL:L:L:L:LL::L:LLL::L:::L::L::L::::L:L:L::L:::::L::L LaLaLaLaLaLaaLaLaLaLaLaLaLaLaLaaaLaLaLaLLaLaaLaaLaLaLLLaLaLaaLaLLLaLaLaLaLaLLLaLaLaaLaLaL rgrgrgrgrgrgrgrgrgrgrgrgrgrgrggrggrgrgrgrgrrrggrgrgrgrggrgrrggrgrggrggrgrgrgrggggggggggggggggggggeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
general informationfor specifications see PPaaaaaaaagagaggaggagagagagaaaaaaaagaaaaagaaaaaaaaggaaaaaagaaaaagagaaaaaaaaaagaaagaaaaaaggaaaagggee e e ee eeeeeeeee 88888888888888888888888888888SC SMNSTVTV
bybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybybyby-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-p-pasasasaasasasasasasasasasasasasasasasasasasasasasasasasasasaasasasasasasasasasaasasasasasasasaasasasasasasasaasasasasasasasasasasaasasasasasasasasasasasasasasasasasasasasasasasasaasasasasasasasasasasasasaasasassssssssssssfofofofofofofofofofofoffofofofofofofofffofoffofofoofofofffoffoooorrr rrr rr rrrrrrrrrrrrrrrrrrr rrrrrrrrrrrrrrrrrrrrrr spspspspsspspspspspspspspspspspspsspspspspspspspspspspsppspspspssspsppspssspspspppspspspspsspsppppppssppspppspsppppspppsppspsppspppeeeeeeeeeeecccccceeeeeeeeeeccceeeeeeeeeeeeececceeeeecceeeeeeeeceeeeeeeeceeeeeeeeee ififificicicatatatioioioonsnsnsnss s s s s ssseeeeeeeeeeeee Page 9BSBSBSBSBSBSBSBSBSBSBSSBSBSBSSBSBSSBSBSSSBSBSBSBSBSBSBSBBSBSBSBSBSBSBSSBSBSSSBSBBSSSBSSSBBPBPBPBPBPBPBPBPBPBPBPPBPBPPBPBPBPBPBPBPBBPBPBBPBBPBPPBBPBPBPBPBPPBBPPPBPBPBPBPPPPBPPBBBPPPBBBPPBBBPPBPPPBPPPPPBZBZBZBZBZBBZBZBBZBZZZZZBZBZBZBBZZZZZBZBZZZZZZZZZBCBC
XSGreater resistance to differentialpressure.
TVThe frame is coated when the heat-exchanger frame is exposed corrosivesubstances.
5
Recuperator offers a series of options for differing requirements.
:standard version for Series B
BAL/AC
FAL/AC
BI6
FI6
XS TV AZ SM SC CP NSSeries
CPTop cover with bevelled corners toreduce the diagonal dimension.
NSVersion using other sealants instead ofsilicon. Available for temperatures of upto 90°C (temperature range “N”).
AZSide in thinner aluminium.
RFReinforced frame for lager, heavierheat-exchangers.
SCExtra sealing to ensure closer fit of thetwo air-flows (example: application forhospitals). A leakage diagram can behad on request in this version.
SMMechanical sealing of the exchangerunit. A leakage diagram in this versioncan be had on request.
CSSpecial corner sections to makediagonal fitting easier.
4
2
2
1
3
1 3
CS RF
:standard version for Series F2
:standard version for models02 and 03
4
1 :not available for the “Y” temperature range
3
Options
CS Option CP Option (B series) CP Option (F series)
6
BPLateral by-pass with damper, used toregulate the power exchanged in theheat-exchanger; the dampers aremounted on the exchanger frame anddesigned so as to give the samepressure drop as the heat-exchanger.
BSLateral by-pass without a damper.
BCIn this version, the by-pass section is ina central position.
BZCentral by-pass without a damper. BA
Lateral by-pass with a damper andinstallation of the servomotor inside thetreatment unit.
BLLateral by-pass with short damper forinside shaft.
BBCentral by-pass with damper andinstallation of the servomotor insidetreatment unit.
BVLateral by-pass with vertical-bladedamper.
BP..BP..Double side by-pass with damper.
B
F
BS BZ BP BC BB BL BV BP..BP..Series
Recuperator provides a series of By-pass options to meet various requirements. All the By-pass options are valid from Model03.
BA
By-pass Options
7
The air-flow direction is of no real importance. However, it is recommended that the exhaust air pass through the heat-exchanger from the top towards the bottom in cases in which the formation of condensation is to be expected.
Some examples of the behaviour of the two air-flows, using a single heat-exchanger.In special cases, it is possible to use several heat-exchangers to overcome inconveniences such as: lack of space, a majordifference between the two flows, etc. The drawings show a few examples.
Special Applications
Recuperator S.p.A Rescaldina (MI), Italy www.recuperator.eu www.recuperatorusa.com
A series
Application
-Air Conditioning and Heating -Swimming pool and Hospital -Replacement with recovery
Dimensions
Depending on the various options introduced, the size may vary from those shown. Please contact Recuperator for correct evaluation
Model B1 A1 mm (in) mm (in)
02 200 (7.87) Max 500 (19.68) Coming soon
03 300 (11.81) Max 500 (19.68) 04 400 (15.74) Max 500 (19.68) Coming soon
05 500 (19.68) Max 500 (19.68) Coming soon
06 600 (23.62) Max 500 (19.68) Coming soon
Performance
Performance indicative; for correctly selection, use Recuperator's Rex selection program
Model Max flow rate ∆P η m³/h (CFM) Pa inWC %
02 03 600 (355) 100 (0.4) 75.00 04 05 06
Recuperator S.p.A Rescaldina (MI), Italy www.recuperator.eu www.recuperatorusa.com
B series
Application
-Air Conditioning and Heating -Swimming pool and Hospital -Industrial ventilation -Replacement with recovery -Spray booth
Dimensions
Depending on the various options introduced, the size may vary from those shown. Please contact Recuperator for correct evaluation.
Model B1 A1 mm (in) mm (in)
02 200 (7.87) Max 700 (27.55) 03 300 (11.81) Max 900 (35.43) 04 400 (15.74) Max 1200 (47.24) 05 500 (19.68) Max 1300 (51.18) 06 600 (23.62) Max 1400 (55.11) 07 700 (27.55) Max 2000 (78.74) 08 800 (31.49) Max 2000 (78.74) 14 1400 (55.11) Max 2000 (78.74) 16 1600 (62.99) Max 2000 (78.74)
Performance
Performance indicative; for correctly selection, use Recuperator's Rex selection program
Model Max flow rate ∆P η m³/h (CFM) Pa (inWC) %
02 1500 (882) 130 (0.52) 50.00 03 3555 (2092) 180 (0.72) 52.50 04 7000 (4120) 250 (1.00) 50.50 05 9500 (5591) 260 (1.04) 50.50 06 11500 (6768) 280 (1.12) 55.50 07 20000 (11771) 300 (1.20) 52.00 08 22500 (13243) 300 (1.20) 52.00 14 38000 (22366) 300 (1.20) 60.00 16 42000 (24720) 300 (1.20) 60.00
Recuperator S.p.A Rescaldina (MI), Italy www.recuperator.eu www.recuperatorusa.com
F series
Application
-Air Conditioning and Heating -Swimming pool and Hospital -Industrial ventilation -Replacement with recovery -Spray booth
Dimensions
Depending on the various options introduced, the size may vary from those shown. Please contact Recuperator for correct evaluation.
Model B1 A1 mm (in) mm (in)
07 705 (27.75) Max 2400 (94.48) 08 805 (31.69) Max 2400 (94.48) 09 905 (35.62) Max 2400 (94.48) 10 1005 (39.56) Max 2400 (94.48) 12 1205 (47.44) Max 2400 (94.48) 14 1410 (55.51) Max 2400 (94.48) 16 1610 (63.38) Max 2400 (94.48) 20 2010 (79.13) Max 2400 (94.48) 24 2410 (94.88) Max 2400 (94.48)
Performance
Performance indicative; for correctly selection, use Recuperator's Rex selection program
Model Max flow rate ∆P η m³/h (CFM) Pa (inWC) %
07 26000 (15303) 260 (1.04) 50.50 08 32000 (18834) 260 (1.04) 50.00 09 37000 (21777) 300 (1.20) 50.00 10 42000 (24720) 260 (1.04) 50.00 12 51000 (30017) 280 (1.12) 55.50 14 54000 (31783) 300 (1.20) 53.50 16 60000 (35314) 260 (1.04) 50.00 20 75000 (44143) 270 (1.08) 55.50 24 95000 (55915) 300 (1.20) 60.00
11
Recuperator supplies its customers withthe REX program (RecuperatorExchangers). This enables customersto select the best heat-exchanger, sinceit contains a price-list and all thenecessary technical information.
Selection
LepetitIndustrial Pharmaceuticals - Switzerland
CariploBank - Italy
LinateAirport - Italy
12
Recuperator is able to offer itscustomers a disk and a book, coveringthe first ten years of its activity (1975-1985), containing a few thousandcustomer references from all over theworld.
FIATAutomobile - Italy
CarrierHVAC - USA - France
General MotorsAutomobile - USA
LuxotticaIndustrial - Italy
BBCTelevision - UK
ComprintStamping Machine - Australia
Nuova BicoccaUniversità di Milano - Italy
BayerIndustrial Pharaceutical - Italy
NovotelInternational Hotel Chain
Customer References
Italtel-TelecomTelecomunications - Italy
EnelIndustrial Eletrical - Italy
PirelliTires - Italy
Magneti MarelliIndustrial Electronics - Italy
RicordiIndustrial Graphics - Italy
San PaoloBank - Italy
RECUPERATOR
Recuperator USA - PO Box 10084, Lancaster, PA 17605 - Tel: 717-299-5679 - Fax: 717-299-5679 - Cell.: 717-917-3635 [email protected] - www.RecuperatorUSA.com
Advanced Testing Capabilities Recuperator has two state-of-the-art computerized wind tunnels capable of testing every size and configuration of plate and rotary heat and energy exchanger to ASHRAE, AHRI, TUV or Eurovent standards. We can also test to custom specifications.
Recuperator USA PO Box 10084
Lancaster, PA 17605 Tel: 717-299-5679 Cell: 717-917-3635
Email: [email protected] www.RecuperatorUSA.com