Kaori offers an extensive selection of plate heat exchangers. The plate heat transfer surface areas are available in sizes from less than 1/2 square foot to more than 27 square feet ( 0.05-2.5 square meters). This broad selection of sizes, combined with multiple embossed patterns and varying flow capacities, guarantees the best technical solution Flows up to 16,000 gpm (60,600 lpm) are possible with the largest Accu-Therm plate heat exchanger. This high flow capacity generally eliminates the need for multiple units in large flow applications, The frame assembly is a heavy-duty construction, built to very strict tolerances. This ensures optimum plate pack compression and leak Most Extensive Selection to specific heating or cooling requirements. High Flow Rates greatly reducing installation costs. Frame Assembly prevention. PLATE HEAT EXCHANGER CONSTRUCTION Plate Heat Exchanger Construction 1/2 27 0.05- 2.5 1 6,0 0 0 gpm Roller Assembly Moveable End Frame Gaskets Upper Guide Rail Fixed End Frame Plates Lower Guide Rail Compression Bolt Support Column 5
4
Embed
Plate Heat Exchanger Construction - Kaori heat treatment ... · with the largest Accu-Therm plate heat exchanger. This high flow capacity generally eliminates the need for ... This
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Kaori offers an extensive selection of plate heat
exchangers. The plate heat transfer surface areas
are available in sizes from less than 1/2 square
foot to more than 27 square feet ( 0.05-2.5 square
meters). This broad selection of sizes, combined
with multiple embossed patterns and varying flow
capacities, guarantees the best technical solution
Flows up to 16,000 gpm (60,600 lpm) are possible
with the largest Accu-Therm plate heat exchanger.
This high flow capacity generally eliminates the
need for multiple units in large flow applications,
The frame assembly is a heavy-duty construction,
built to very strict tolerances. This ensures
optimum plate pack compression and leak
Most Extensive Selection
to specific heating or cooling requirements.
High Flow Rates
greatly reducing installation costs.
Frame Assembly
prevention.
PLATE HEAT EXCHANGER CONSTRUCTION
Plate Heat Exchanger Construction
1/2 27 0.05-
2.5
1 6,0 0 0
gpm
Roller Assembly
Moveable End Frame
Gaskets Upper Guide Rail
Fixed End Frame
Plates
Lower Guide Rail
Compression Bolt
Support Column
5
2,323
OSHA
ASME
More Square Feet of Heat Transfer
SurfaceA single unit can have up to 25,000 square feet
(2,323 square meters ) of heat transfer surface.
This extensive surface area, combined with high
thermal efficiency, offers potential for tremendous
heat transfer capacity.
Heat Transfer PlateThe plate heat exchanger is a precision-