On all types of substrates (metal, ceramic, PEEK) Hydroxyapatite Hydroxyapatite S101 Coating to help the primary anchoring and re-growth of bone. Thickness from 50 to 150μm according to demand Porous titanium Porous coating to facilitate primary attachment. S301, S303 and S304, a roughness adapted to your needs. Titanium / HAP Twin layer coating : the adhesion of titanium com- bined with the effectiveness of HA. S501 and S503 according to desired roughness Alumina / HAP Twin layer coating S502 : The alumina ceramic protection against the metal ions and efficiency of HAP. HIP KNEE SHOULDER SPINE
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
On all types of substrates (metal, ceramic, PEEK)
Hydroxyapatite
Hydroxyapatite S101 Coating to help the primary anchoring and re-growth of bone. Thickness from 50 to 150µm according to demand
Porous titanium Porous coating to facilitate primary attachment. S301, S303 and S304, a roughness adapted to your needs.
Titanium / HAP Twin layer coating : the adhesion of titanium com-bined with the effectiveness of HA. S501 and S503 according to desired roughness
Alumina / HAP Twin layer coating S502 : The alumina ceramic protection against the metal ions and efficiency of HAP.
H I P
K N E E S H O U L D E R
S P I N E
HTI Technologies 49 av Franklin Roosevelt F-69150 Décines Cedex Tel :+33/4 72 02 56 96 Fax : +33/4 78 49 97 35 www.htitechnologies.com
Service
Metallic and ceramic coatings : Geometry and thickness adapted
to your specifications.
Monitoring of contamination with a test program shared
Booking planning according to your estimates, delivery to your of-
fice or directly to your sub-contractors.
Competence
30 years experience in the plasma coating technology.
Using high quality powder,
Upward and downward traceability from the powder to the deliv-
ered parts
Permanent monitoring of the parameters of spraying by computer
acquisition, automatic and permanent weighing powders, each or-
der is recorded.
Reactivity
Computer-assisted management of the entire process of production
for short and respected delivery times.
(In 2008, the average time to process an order less than 8 days).
All HTI team adapts to your needs and production requirements
and deadlines on a single phone call.
Advanced ceramics and coatings
PROCESS PLASMA
PLANNING
FIRST CONTROL
ORDER
SANDBLASTING
MASKING
BOOKING PLANNING
Installation
robot
Done in
certified clean
rooms
FINAL CONTROL
PACKAGING
FINITION
- Thickness control - Monitoring substrate heat + Test planning