PLANAR INVERTED F ANTENNA TANJIR ALAM ECE124007
PLANAR INVERTED F ANTENNA
TANJIR ALAMECE124007
WHAT IS PIFA The inverted F Antenna (IFA) typically consists of a
rectangular planar element located above a ground plane, a short circuiting plate or pin, and a feeding mechanism for the planar element.
The inverted F antenna is a variant of the monopole
where the top section has been folded down so as to be parallel with the ground plane.
This is done to reduce the height of the antenna, while
maintaining a resonant trace length.
PIFA can be considered as a kind of linear inverted F antenna (IFA) with the wire radiator element replaced by a plate to expand the bandwidth.
Fig. Inverted F Antenna
Fig. Basic Planar Inverted F-Antenna The shape of the antenna appears like an inverted F, and hence named Planar Inverted F Antenna (PIFA) .
WHY PIFA?
The antenna is small in size, easy to manufacture and has low fabrication cost.
Planar Inverted F Antenna has an omni-directional pattern and provides high gain in vertical and horizontal direction.
The structure of PIFA is simple and can be easily hidden in handsets when compared to other conventional antennas.
Planar Inverted F Antenna is a type of Inverted F Antenna (IFA) in which a wire radiator is substituted by a plate to increase the bandwidth.
The antenna not only shows improved performance but also reduces backward radiation towards user’s body and head i.e., it minimizes SAR.
Fig. Fabricated PIFA
Fig. Gain of a PIFA
OBJECTIVE OF PIFA In wireless communication a low profile antenna that supports multiband and
wideband operations is required. In order to meet these requirements Planar Inverted F Antenna designs are needed.
These antennas are compact and support multiband and wideband operations. Therefore such antennas are suitable for the devices where space is a major issue.
PIFA has low backward radiation and hence it minimizes electromagnetic wave absorption.
It has a self resonating structure.
Height of radiator and variation of distance, location and length affects the performance of the antenna.
Therefore Planar Inverted F Antennas (PIFA) can be used for variety of applications such as in mobile and radio communication because of its compact size, reduced length and easy integration.
Fig. 3D Radiation pattern of a PIFA.
TYPES OF PIFA
A. Slotted Patch PIFA Design
B. Tapered T-PIFA design
C. Reconfigurable PIFA Design
D. Defected Ground Plane PIFA Design
E. Fractal Circular PIFA Design
F. Square Patch PIFA Design
Fig.A slotted patch PIFA(4 slots)
Fig. B. Tapered T-PIFA design
Fig.C.Reconfigurable PIFA
Fig.D. Defected Ground Plane PIFA
Fig.E. Fractal Circular PIFA Fig.F. Square Patch PIFA
APPLICATIONS OF PIFA
a) Planar Inverted F-Antenna for Handheld Devices
b) Planar Inverted F-Antenna array for MIMO application
c) Planar Inverted F-Antenna for Medical Applications
Fig. Isometric view of PIFA structure for medical application
Fig. 3D Layout of a antenna
Fig. Layout of the MIMO design
ADVANTAGES OF PIFA
It can be hiding into the housing of the mobile while comparable to whip/rod/helix antennas.
It reduces the backward radiation toward the user’s head, minimizing specific absorption rate (SAR).
Third advantage is that PIFA it exhibits moderate to high gain in both vertical and horizontal states of polarization.
DISADVANTAGES OF PIFA Narrow bandwidth characteristic of PIFA is one of the limitations for its commercial
application for wireless mobile.
DESIGN AND RESULTS USING HFSS
Proposed Design
Fig. detailed dimension
Fig. 3D views in HFSS
Detailed Dimensions
Parameter Value (mm) Parameter Value (mm)
L 100 W 60
L1 61 W1 40
L2 23 W2 30
L3 18 W3 20
L4 9.5 W4 8
h 8 Sg18.5
TECHNIQUES TO IMPROVE THE BANDWIDTH OF PIFA Bandwidth is affected very much by the size of the ground plane. By varying the
size of the ground plane, the bandwidth of a PIFA can be adjusted. For example, reducing the ground plane can effectively broadened the bandwidth of the antenna system.
Use of thick air substrate to lower the Q and increase the bandwidth.
Using parasitic resonators with resonant lengths close to main resonant frequency.
Adjusting the location and the spacing between two shorting posts.
Impedance Matching The impedance matching of the PIFA is obtained by positioning of the
single feed and the shorting pin within the shaped slot, and by optimizing the space between feed and shorting pins.
The main idea designing a PIFA is to don’t use any extra lumped components for matching network, and thus avoid any losses due to that.
Radiation Pattern The radiation pattern of the PIFA is the relative distribution of radiated power as a
function of direction in space.
In the usual case the radiation pattern is determined in the far-field region and is represented as a function of directional coordinates. Radiation properties include power flux density, field strength, phase, and polarization.
Return Loss (S11) DIMENSIONS OF U-SLOTs(Width=1mm) *all dimensions in mm.
U-SLOT1(30*23)U-SLOT2(20*18)U-SLOT3(12*14)
DIMENSIONS OF U-SLOT (Width=1mm) all dimensions in mm.
*//U-SLOT3 shifted 1 unit in all side\\*U-SLOT1(30*23)U-SLOT2(20*18)U-SLOT3(14*15)
RETURN LOSS CURVE DUE TO SHIFTED U-SLOT3
DIMENSIONS OF U-SLOT (Width=1mm) all dimensions in mm.*//U-SLOT3 shifted 1 unit more in all side\\*U-SLOT1(30*23)U-SLOT2(20*18)U-SLOT3(16*16)
RETURN LOSS CURVE DUE TO SHIFTED U-SLOT3 1 UNIT MORE
3D Radiation Pattern
Radiation Pattern
AT OPERATING FREQUENCY 2.098 GHz, PHI=0 deg
AT OPERATING FREQUENCY 2.098 GHz, PHI=90 deg
AT OPERATING FREQUENCY 2.94 GHz, PHI=0 deg
AT OPERATING FREQUENCY 2.94 GHz, PHI=90 deg
AT OPERATING FREQUENCY 4.94 GHz, PHI=0 deg
AT OPERATING FREQUENCY 4.94 GHz, PHI=90 deg
Conclusion
There are few conclusions that can be drawn from this thesis work:
The designed multi-band antenna, built on PIFA structure, is very sensitive to any
changes to the dimensions of the structure including the ground plane.
Ground plane of the antenna is used as a radiator resulting in overall size reduction
and improvement in the operating bandwidth.
There is 5% reduction in overall volume of the proposed antenna as compared to
design in [10].
Also there is significant improvement in gain and radiation efficiencies at obtained
resonant frequencies.
May 1, 2023National Institute of Technical Teacher's Training & Research, Chandigarh
REFERENCES[1] Balanis, Constantine. "Antenna Theory: A Review", Proceedings of the IEEE, vol. 80, January 1992. [2] G. R. Kadambi, K. D. Simmons, J. L. Sullivan, and T. Hebron, “SingleNfeed multiband PIFA for cellular and non cellular applications,” Centurion Wireless Technologies, Inc., 2002.[3] Bluetooth. [Online]. Available: www.anycom.com; Bluetooth@ anycom.com[4] M. Sanad and N. Hassan, “A compact dual band microstrip antenna forNportable GPS/cellular phones,” presented at the Proc. IEEE Antennas Propagation Int. Symp., Salt Lake City, UT, Jul. 1999.[5] P. Salonen, M. Keskilammi, and M. Kivikoski, “Single-feed dual planar inverted-F antennas with U-slot,” IEEE Trans. Antennas Propag., vol.N48, no. 8, pp. 1262–1264, Aug. 2000.[6] D. Nashhat, H. Elsadek, and H. Ghali, “Dual-Band reduced size PIFA antenna with U-slot for bluetooth and WLANapplications,” presented at the Proc. IEEE Antennas Propagation Int. Symp., Columbus, OH, Jun. 22–27, 2003[7] W2AEE Antenna History. Arthur M. Kay (?), scanned by Alan Crosswell. http://www.w2aee.columbia.edu/history/antenna-history.html[9] IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 53, NO. 8, AUGUST 2005 2631Single Feed Compact Quad-Band PIFA Antenna for Wireless Communication Applications. Dalia Mohammed Nashaat, Hala A. Elsadek, Member, IEEE, and Hani Ghali, Member, IEEE[10] Journal of Electromagnetic Analysis and Applications, 2011, 3, 406-411 doi:10.4236/jemaa.2011.310064 Published Online October 2011 (http://www.SciRP.org/journal/jemaa)