TOOL-WISE™ INDUSTRIAL BANDSAW BLADES PRICE LIST 2015 Made to length in the UK, with American precision engineered steel from TEL: (+44) 01535 634280 FAX: (+44) 01535 636094 E-MAIL: [email protected]P J Wiseman Ltd T/A Tool-Wise, Unit 3 The Crossings, Riparian Way, Crosshills, North Yorkshire, BD20 7BW All Prices exclude V.A.T.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
TOOL-WISE™
INDUSTRIAL BANDSAW BLADES
PRICE LIST
2015
Made to length in the UK, with American precision engineered steel from
9 - 10 M42 Bi-metal General Purpose Bandsaw Blades
11 The Morse Achiever Bi-metal Production Bandsaw Blades
12 Independence II Bi-Metal ‘M-72’ Versatile Production Bandsaw Blades
13 Independence EXS Bi-Metal ‘M-72’ Extreme Production Bandsaw Blades
14 M FACTOR EX Tungsten Carbide Tipped Bandsaw Blades for cutting Exotic materials
15 M FACTOR GP Tungsten Carbide Tipped Bandsaw Blades for cutting General materials
16 M FACTOR FB Tungsten Carbide Tipped Bandsaw Blades for cutting Aluminium
17 M FACTOR CH Tungsten Carbide Tipped Bandsaw Blades for cutting Case Hardened materials
18 Carbon HEF Versatile Carbon Bandsaw Blades
19 Tungsten Carbide Grit Bandsaw Blades for cutting Abrasive materials
20 Bandsaw Blade Tension, ‘Break In’ Procedure, Order Process, Delivery Times & Carriage Paid Terms
21
Notes List your most popular blade orders
22 Conditions of Sale
Also available from P J Wiseman Ltd:-
New & Used Industrial Machinery
Wire Brushes, Chip Brushes
TCT & Cermet Circular Saw Blades
Reciprocating / Sabre Saw Blades
Holesaws
Hand Hack Saw Blades
Screwdrivers & screwdriver bits
Other Tooling Consumables
Please feel free to get in touch with us for more information on the above products.
Page 2 of 21
3 Step Industrial Bandsaw Blade Selection Guide Step 1 Find the length x width x thickness of the blade the machine uses, for example:-
4115mm x 34mm x 1.1mm x 3/4 MTX PR
13’ 6” x 1 ¼” x 3/4 MTX PR
Step 2 Answer the questions:-
What material is to be cut in terms of Grade, Hardness, Shape, Size, Bundle cut and if so how or 1 at a time?
What does the end user of the blade want in terms of a production blade, general purpose blade, long life, fast cutting?
From this you will be able to then use the tables below to work out what grade of bandsaw blade and Teeth Per Inch (T.P.I.) is
needed.
Bi-Metal Product Selection
P E R F O R M A N C E
Independence EXS (Ind EXS)
Independence II (Ind II)
The Morse Achiever (TMA)
Challenger
M42
MTX
M42
Aluminium/ Brass/ Copper
Low Carbon Steels
Structural Steel
Alloy Steels
Mold Steels
Stainless Steels
Tool Steels
Titanium Alloys
Nickel Based Alloys
EASY MACHINABILITY DIFFICULT
Tungsten Carbide Tipped (TCT) Product Selection
P E R F O R M A N C E
EX
GP
FB
Wood Aluminium Carbon Steels
Alloy Steels
Mold Steels
Stainless Steels
Tool Steels
Titanium Alloys
Nickel Based Alloys
EASY MACHINABILITY DIFFICULT
Special Tungsten Carbide Product Selection
P E R F O R M A N C E
CH
Tungsten Carbide Grit
Tires & Rubber
Composites Structural
Steel
Case Hardened Materials
EASY MACHINABILITY DIFFICULT
Page 3 of 21
3 Step Industrial Bandsaw Blade Selection Guide
Step 3
Tooth Selection Guides Having the correct number of Teeth Per Inch (T.P.I.) is very important!
Too fewer teeth and the teeth will break off, too many and the tooth gullets will become too full, this will:- 1. Reduce the blade life. 2. Cause inaccurate, uneven, rough cuts.
All of which can, again end up being very expensive. A good guideline is:- A Min of 3, max of 24, ‘sweet spot’ of 6 to 12 teeth in the work piece at any one time. The tables below show the min to the max that the T.P.I. can take.
Tungsten Carbide Tipped (TCT) TPI Selection Guide
Cross Section (mm) T.P.I
From To
80 120 3
50 100 3/4
80 150 2/3
120 350 1.5/2
400 1000 0.75/1.1
Challenger TPI Selection Guide
Cross Section (mm) T.P.I
From To
3 50 8/11
5 80 5/7
20 100 4/6
50 150 3/4
90 350 2/3
Bi-Metal - MTX, M42, TMA, Ind II, Ind EXS & Carbon – HEF TPI Selection Guide
Solid
Variable Pitch
Cross Section (mm) T.P.I
From To
- 6 20/24
3 15 14/18
6 30 10/14
20 50 8/12
25 60 6/10
35 80 5/8
50 100 4/6
80 150 3/4
120 350 2/3
250 600 1.5/2
400 1000 1.1/1.5
700 1400 0.75/1.1
Constant Pitch
Cross Section (mm) T.P.I
From To
- 4 32
- 6 24
3 10 18
6 15 14
15 30 10
30 50 8
50 80 6
80 120 4
120 200 3
200 400 2
300 800 1.14
Profile, i.e. Box, Tube, etc.
Wall Thickness
(mm)
Outer Diameter (mm) / T.P.I.
20 40 60 80 100 120 150 200
2 14 14 14 14 14 14 10/14 10/14
3 14 14 10/14 10/14 10/14 10/14 8/12 8/12
4 14 14 10/14 10/14 8/12 8/12 8/12 8/12
5 14 10/14 10/14 10/14 8/12 8/12 8/12 6/10
6 14 10/14 10/14 8/12 8/12 8/12 8/12 5/8
8 14 10/14 8/12 8/12 8/12 8/12 6/10 5/8
10 - 8/12 6/10 6/10 6/10 5/8 5/8 4/6
12 - 8/12 6/10 6/10 5/8 5/8 4/6 4/6
15 - 8/12 6/10 5/8 5/8 4/6 4/6 4/6
20 - - 6/10 5/8 4/6 4/6 4/6 3/4
Page 4 of 21
MTX Bi-Metal Multi-Purpose Bandsaw Blades
Features & Benefits
Found to outperform our competitors M42 & very cost
efficient!
Featuring a proprietary HSS tooth – For increased
blade life.
HSS teeth & Spring Steel Backer – Can run double the
feed of Carbon, cuts smoother, and can last 10 times
If a Bandsaw Blade is over or under tensioned, it can and will:-
Reduce the blade life.
Cause inaccurate cuts.
Cause damage to the Bandsaw Machine.
All of which can end up being very expensive. The table below is a rough guide of what tension your blade should be on related to the width, thickness, and type of blade you have. For a more accurate tension, please consult your machine manual.
Blade Material
Width x Thickness (mm)
Tension
(psi)
Bi Metal & TCT
Up to 13 x 0.65
13 x 0.90 to 27 x 0.90
34 x 1.10 to 54 x 1.60
67 x 1.60 to 80 x 1.6
15,000 – 20,000
25,000 – 30,000
30,000 – 35,000
35,000 – 40,000
Carbon
Up to 13 x 0.65
16 x 0.80 to 27 x 1.10
34 x 0.90 to 51 x 1.10
15,000 – 20,000
20,000 – 25,000
25,000 – 30,000
Bandsaw Blade ‘Break In’ Procedure 50/50 rule
50% of the feed rate for 50 square inches (300 square cm)
Or 20 mins approximately of cutting time.
Gradually increasing the feed rate until back up to normal feed rate.
Order Process You can order via the following methods
Use this page to make a note of your most popular length, width. TPI and type of blade
Length Width Thickness TPI Type of Blade
i.e M42
Page 21 of 22
CONDITIONS OF SALE
P J Wiseman Limited. (“The Company”)
P J Wiseman Limited ("The Company") only do business upon the following Conditions of Sale and all orders are accepted and
executed on the understanding that these Conditions are incorporated into any Contract with a Customer to the exclusion of any
conditions which the Customer seeks to impose.
1. PRICES
All orders will be invoiced at prices ruling at the date of despatch and where applicable V.A.T. will be added to the invoice. 2. ORDER VALUE
For minimum order values and carriage paid order values please see terms sheet available to distributors and merchants. 3. DELIVERY
Every attempt will be made to meet quoted delivery times but time shall not be of the essence unless specifically so agreed in writing. The Company accepts no responsibility for the delay howsoever caused. If performance of any of the Company's obligation shall be prevented hindered or interfered with by any cause or reason beyond the reasonable control of the Company the Company shall have the option to suspend or cancel any obligation then unperformed.
4. CARRIAGE & PACKAGING
Subject to (2) above the goods are normally despatched carriage paid to addresses in the U.K. The right is reserved to supply goods in nearest packaging where an order does not meet the Company's standard packed quantities.
5. GOODS RETURNED FOR CREDIT
Goods returned for credit must be of the Company's current specification, undamaged and with packaging intact. They will only be accepted after written agreement has been issued by the Company and in every instance will be subject to a handling charge of 12.5%.
6. CANCELLED ORDERS
Orders will only be considered cancelled by the Company after written agreement on mutually satisfactory terms. The Company reserve the right to consider an order cancelled, without prejudicing any right it may otherwise possess if a customer has a receiver appointed, goes into liquidation, compounds with his creditors or commits an act of bankruptcy.
7. CLAIMS AGAINST CARRIERS
The Company will not be responsible for any delay occasioned by carriers after despatch from the Company's works. Any damage or shortages must be notified in writing, both to the carriers and to the Company within three days of receipt of goods. In the case of non-delivery claims must be made within seven days from receipt of invoice.
8. PAYMENT TERMS
Payment is due by the end of the month following the month of sale unless otherwise agreed in writing. The Company reserves the right to charge interest at 2.5% over Bank of England minimum lending rate for the time being on overdue accounts. Without prejudice to the above, in the event of payment not being received by the due date all monies owing to the Company under this or any other Contract shall become payable immediately. Pending such payment the Company reserves the right to suspend performance of any of their obligations to the Customer.
9. RISK AND TITLE (a) Risk shall pass to the Customer on delivery and the Customer should insure accordingly. (b) Title in any goods
supplied by the Company shall not pass to the Customer until the Company has received payment in full for all such goods. (c) Until such payment is received the Customer shall if so requested by the Company store the goods in such a way that they can be clearly identified as the property of the Company. (d) If before title in the goods has passed to the Customer he resells the same, such resale shall be treated as a sale by the Customer as Agent for the Company and the Customer shall be liable to account to the Company for the proceeds of all such sales. Upon paying all his indebtedness to the Company the Customer shall be entitled to retain the balance (if any) of such proceeds as his agreed commission on the sales. (e) The proceeds of sale of such goods by the Customer when acting as Agent for the Company shall be placed by the Customer in a separate bank account expressly for the benefit of the Company. (f) The Customer undertakes that in the event of his selling any goods and not receiving the proceeds thereof he will if so requested by the Company transfer to the Company all rights of recovery he may have against the Purchaser. The Company undertakes to account to the Customer for any sums received from such Purchaser in excess of amounts due by the Customer to the Company. (g) If the Customer makes default in payment or if for any other reason the Company treats this Contract as discharged the Company shall be entitled to enter the Customer's premises and to re-possess its goods.
10. SPECIALS
The supply of items manufactured to special order by the Company will in every case be the subject of a separate contract under specific conditions of sale.
11. DEFECTS AND GUARANTEE
All goods are described as accurately as possible in the Company's publications but minor variations from these specifications will not constitute a breach of contract, Goods sold by the Company are guaranteed against defective materials or faulty workmanship but the Company's liability is limited to replacement of the said goods or refund of any price paid for them if when the goods are returned to the Company they are upon examination found to have been defective at the time of despatch. It shall be the Customer's responsibility to satisfy himself that the goods are suitable in every way for the purpose for which he intends to use them and no warranty, condition or representation is given by the Company as to the fitness of the goods for any particular purpose. The Company accepts no liability for any consequential loss or damage howsoever caused, and the guarantee given above is given in lieu of and to the express exclusion of all other guarantees conditions warranties representations express or implied except where the law at any time prohibits the exclusion or restrictions of such liability. No claims for faulty materials or workmanship will be entertained if modifications or repairs to the goods have been effected other than by the Company.
These Conditions of Sale shall be construed in accordance with English Law and be subject to the jurisdiction of the English Courts.