PIVOT SLIDING CABINET DOOR SYSTEMS HAWA-CONCEPTA …€¦ · PIVOT SLIDING CABINET DOOR SYSTEMS HAWA-CONCEPTA 25/30/50 Pivot sliding system for high quality cabinet applications,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
290 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
PIVOT SLIDING CABINETDOOR SYSTEMS
HAWA-CONCEPTA 25/30/50Pivot sliding system for high quality cabinet applications, including walk in cabinets due to the lack of a bottom channel. The clever design means installation and adjustment is simple and straightforward.
> Ideal for residential bespoke applications, largecontract furniture designs and commercialprojects such as hotels, shops and office fit outs
> Unhanded, for left and right hand installations
> Adjustments are made from the front
> Range:
Max. door weight 25/30/50 kgDoor height from 1250-2850 mm depending on set use
Door width from 300-900 mmDoor panel thickness from 19-50 mm
> HAWA-Concepta fitting set 25/30 comes withinstallation drawing ref. 22363, availableseparately on request
> HAWA-Concepta fitting set 50 comes with installation drawing ref. 22532, availableseparately on request
> HAWA Concepta connector profile, shown onpage 291: Modular system which simplifiesHAWA-Concepta installation where therequirement is to have a cabinet door against theexternal panel. The connector profiles fit easilyinto the Concepta top and bottom guide channelswithout the need to carry out any further drillingonto the cabinet. The single brackets are pre-mounted to the side panel, then offered up tothe track profile. Slide the connector connection profile down the line of the track andsecure from above with a locking nut. For thedouble version slide the profile in afterwards fromthe front.
73
DH
DW
DH = Door heightDW = Door widthE = Maximum door panel width that can be
withdrawn into the cabinet (measured frominternal face of closed door panel).
T = Internal cabinet depth required to achieve dim.E. If the cabinet is deeper, the fitting must bemounted at the distance T from the internalface of the closed door panel to achieve dim.E. If door width is less than dim. E, the T dim.= T - the difference between door width and dim. E.
T = DW - M + 73E = T - 73
T
E73 M
M
> Important: Choice of set to be ordered isdetermined by door panel heights
> HAWA-Concepta includes scissor mechanism, upright profile, fullyadjustable hinges, adjustable end stops and brush seal. TheConcepta 50 is supplied with a two-wheeled trolley for extrasupport.
> Adjustments are made from the front
> All components are screwed onto the intermediate panel
> The same set can be used for either right or left applications
> HAWA-Concepta fitting sets come with installtion drawings,available separately on request:
HAWA-Concepta 25/30 - drawing reference 22363,
HAWA-Concepta 50 - drawing reference 22532
> Order qty: 1 set (per door)
Length Cat. No.
400 mm 408.30.980
Door handle, for wood or glass
> For glass door thickness 8 mm
> For wood door thickness 19 mm
> Anodised aluminium
> Order qty: 1 pc
Length Cat. No.
650 mm 408.30.091
900 mm 408.30.092
Connecting bracket, for wood or glass
> For external or cabinet body connections
> Single bracket - maximum door thickness 30 mm
> Please note: brackets are supplied individually
> Order two brackets if doors are to overlay top and bottom panel
> Predrilled, fixing screws included
> Anodised aluminium
> Order qty: 1 pc
Length Cat. No.
26 mm 408.30.095
650 mm 408.30.093
900 mm 408.30.094
Connecting bracket, for wood
> For cabinet body connections, for 2 doors
> Double bracket - maximum door thickness 28 mm
> Order 408.30.095 separately when using the 110 mm connector(not required for single doors)
> Please note: brackets are supplied individually.
> Order two brackets if doors are to overlay top and bottom panel
> Fixings included
> Anodised aluminium
> Order qty: 1 pc
Connector 55 mm:Recess for onepivot/slide-in doormade of wood orglass
408.30.095 408.30.093/4
Connector 110 mm:Recess for twopivot/slide-in doorsmade of wood
22
55
40
> A glass version is also available as aspecial order. Please contact us for furtherinformation
> Based on the HAWA-Concepta the system is forbi-folding pocket doors
> Two pairs of folding doors enable cabinet frontsup to 2800 mm in width to be stored in the cabinet
> Flush cabinets open fully end to end
> Two doors can be folded and pushed into theside of the cabinet body or wall recess
> Floor to ceiling designs are possible to implementas walk-in cabinets for home office, kitchen, utilityor bathroom.
> Range:
Max. door weight 25 kg (per pair of panels 50 kg)
Door width 300-700 mmDoor height 1250-2600 mmDoor thicknesses 19-28 mm
> Features:
> Semi-overlay; overlays the cabinet top and bottom, but inset to the side panel
> Recesses without cabinet body installations arefeasible
> The folding panels can be pushed back into therecess to be fully flush with the external panel
> Minimal slide in loss of only 73 mm in the cabinetdepth and recess width only 110 mm
> Adjustments can be made at the front of the system. Aluminium fascia conceals the hingeswhen the folded door is in position in the pocket
> Unique scissor technology prevents any jammingwhen folding and sliding
> Allows flexibility of design as can be combinedwith the hinges door variant HAWA-Concepta25/30/50 (door reveal 2-5mm)
292 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
73TB
TH
11073
S
T E
Q1
T = TB + 73 mm - Q1E = T - 73 mmQ1 = 75 mm + S
HAWA-FOLDING CONCEPTA 25Folding and pivot sliding system for bi-folding cabinet pocket doors. Flush cabinet fronts can be fully opened from end to endto give complete access to cabinet contents but are also completely concealed once doors are opened.
Doors reaching from the worktop to the upper cabinet edge
Design with recess cover without a base and with a ceiling connection
Door height 1990 - 2200 mm Door height 2200 - 2700 mm
Application
136(162.25)
136(162.25)
136(162.25)
136(162.25)
8.5
=
67
19.3522.4
(627.4)
19.3522.4
(627.4)
136(162.25)
136(162.25)
136(162.25)
136(162.25)
8.5
420.8(470.8)
=
420.8(470.8)
67
549(649)
1900-2200(2200-2700)
FINETTA SPINFRONT 30/50 FOR SINGLE PIVOT DOORUnique system for single leaf doors that open as conventional doors then push away from view back into the cabinet.
> Finetta Spinfront 30/50
> Range:
For door height: 1990 - 2200 mm/2200 - 2700 mmFor cabinet depth: 560/665 mmMax. door weight for 3 hinges: 30 kgMax. door weight for 5 hinges: 50 kgDoor thickness: 18-30 mm
> For left and right hand use
> Set for 1 door comprises of pivot assembly with backing panel, hinges and sliding mechanism
> Running gear guided by ball bearing mounted runners
298 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
Min. 18 36114
D
3+2 -3147
B
2.5 2.5B
3
A
+2
-2
C
C198
Installation dimensions
Door width per leaf = B = 600 mm
Internal cabinet width = C = 1205 mm
Internal cabinet depth = D = 805 mm
> Finetta Spinfront 60
> Range:
For door height: 1990 - 2200 mm/2200 - 2700 mmFor cabinet depth: 805 mmMax. door weight for 5 hinges 60 kgDoor thickness 18 - 30 mm
> For left and right hand use
> Set for a double door folding the same way comprisespivot assembly with backing panel, hinges and slidingmechanism
> Running gear guided by ball bearing mounted runners
FINETTA SPINFRONT 60 FOR DOUBLE PIVOT DOORSUnique system for bi-folding doors that open as conventional doors then push away from view back into the cabinet.
AA
3
=
67
3
H
1920
67
=
Ø 4 x 20
A = door leaf thickness
H = 1990 - 2200 (2200 - 2700) mm
197 197 197 197
197 197 197 197
766.4
766.4
8.5
19.3
8.5
19.3
67
67
=
=
420.8(470.8)
549(649)
420.8(470.8)
1900-2200(2200-2700)
90
=
=
=
=
90
90
=
=
=
=
90
=
100
840(940)
840(940)
100
=
14
22.59.5
Ø 35
52
R5R7
1416
45 + 0.2 55 + 0.172 + 0.2
5.5 - 0.2 A/2
Drilling pattern
Hinges and connection fittings 1990 - 2200 (2200 - 2700) mm door height
302 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
ACCURIDE 1319, HORIZONTAL OR VERTICAL USEFittings for pivot sliding cabinet doors.
Runner
Mounting bracket
Runner
Hinge carrier thickness 16 mm(supplied by customer)
Mounting bracket
412.5 deep
Ø 35
4.5
Mounting bracketInstallationMounting bracketsmust be inserted into the runners so that the lugs engage towards the centre of the guide
612.6 deep
Ø 35
Mounting plate(order separately)
110º hinge(order separately)
70
19
22
1665
6Gap 2 mm
Ø 35
C
B
Solid wood or plywood strut, to connect upper and lower guidetracks. Length of wooden strut =internal cupboard height less 70 mm
Mounting diagram for doors or flaps opening upwards (horizontal use)
Gap 2 mm
65
72
Mounting diagram for doors opening normally (vertical use)
> Vertical or horizontal use
> Quiet and easy movement
> Panel thickness from 16-20 mm> Maximum door weight 5.5 kg> Maximum door height 700 mm
For wood thicknesses Door height Door weight No. hinges
of 16-20 mm up to up to required
Without synchronised control 700 mm 5.5 kg 2
With synchronised control 2300 mm 25 kg 2-5 depending
on door width
A trial installation should be made for other door heights and weights
> For taller/heavier doors use synchronizedcontrol system Accuride 1316 in conjunctionwith Accuride 1319 (see pages 304-305).See table for max. door weight and heightsavailable
304 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
Ø 35
Door
35 mmaccesshole
Wooden strut Side
panelIntermediate
panel
16min. 45
50
Ø 35
6
19With Ø 35 mm access hole in intermediate panel
min. 10
Wooden strutGap
2
16min. 45
75
Ø 35
6
19
Gap
With shortened intermediate panel
Wooden strut
2min.122
Gap2 mm65
ACCURIDE 1319 WITH ACCURIDE 1316Used as supplement to pivot door fitting Accuride 1319 to enhance its action when tall and heavy doors are used vertically.
> Range:
Max. door height 2300 mm (Not suitable for horizontal use over 1200 mm)
For wood thicknesses Door height Door weight No. hinges
of 16-20 mm up to up to required
Without synchronised control 700 mm 5.5 kg 2
With synchronised control 2300 mm 25 kg 2-5 depending
on door width
A trial installation should be made for other door heights and weights
> Order Accuride 1319separately shown onpages 302-303
Suitable for installed length A Cat. No.
350 mm 408.05.356
400 mm 408.05.409
450 mm 408.05.454
500 mm 408.05.507
550 mm 408.05.552
600 mm 408.05.605
Accuride 1316 synchronised control system
> Comprises:
2x rod guides, white plastic
2x toothed rails, galvanized steel/white plastic
2x pinions with screw mounts, white plastic
Mounting screws, M4 x 25 mm
> To be used with Accuride 1319 system shown on pages 302-303