QA1812 - GRC Pits and Risers - 4 Page Brochure - Nov 2016 - V2 GLASS REINFORCED CONCRETE (GRC) PITS & RISERS STEP IRONS CAN NOW BE INSTALLED IN GRC PITS AND RISERS Whilst developing this product, we listened to the end user, who wanted the flexibility to install step irons before and after installation. There are preformed holes in the back of the pit or riser, where you can install step irons before or after back filling. This unique design gives customers flexibility and a fully compliant step iron installation . The end user can choose to either use the pit with, or without step irons. If step irons are required, follow the steps below. BCP can always install your step irons for you, prior to delivery. STEP INSTALLATION FOR GRC PITS AND RISERS 1. The position of the preformed holes are marked with blue dots #1 2. To complete the penetration into the pit, the front of the preformed holes need to be drilled out to complete the depth required for the step iron #2 3. Drill the holes on the inside of the pit wall using a 25mm drill bit #2 4. Mix Up equal parts of BCP 2 part Megapoxy #3 to a smooth grey paste #4 5. Place a reasonable amount of paste into the hole that you have drilled 6. Coat a small amount around the corrugated part of the step iron #5 7. Push the step iron in and gently tap the step iron in using a piece of timber to protect the plastic coating 8. Finish it off by smoothing around the step iron and the back of the pit or riser #6 #1 #2 #3 Part No. 8314160 #4 #5 Part No. 8505906 #6 Better Concrete Products Pty Ltd, ABN 77 685 113 842 trading as BCP Precast, PO Box 537, Moorebank, NSW, 1875 Phone: 02 9612 5800 Fax: 02 9821 1031 Email: [email protected]Web: www.bcp.com.au
4
Embed
PITS & RISERS - Amazon S3 · QA1812 - GRC Pits and Risers - 4 Page Brochure - Nov 2016 - V2 GLASS REINFORCED CONCRETE (GRC) PITS & RISERS STEP IRONS CAN NOW BE INSTALLED IN GRC PITS
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
QA1812 - GRC Pits and Risers - 4 Page Brochure - Nov 2016 - V2
GLASS REINFORCED CONCRETE (GRC)
PITS & RISERS STEP IRONS CAN NOW BE INSTALLED IN GRC PITS AND RISERS
Whilst developing this product, we listened to the end user, who wanted the flexibility to install step irons before and
after installation. There are preformed holes in the back of the pit or riser, where you can install step irons before
or after back filling. This unique design gives customers flexibility and a fully compliant step iron installation.
The end user can choose to either use the pit with, or without step irons. If step irons are required, follow the steps
below.
BCP can always install your step irons for you, prior to delivery.
STEP INSTALLATION FOR GRC PITS AND RISERS
1. The position of the preformed holes are marked with blue dots #1
2. To complete the penetration into the pit, the front of the preformed holes need to be drilled out to complete the depth required for the step iron #2
3. Drill the holes on the inside of the pit wall using a 25mm drill bit #2
4. Mix Up equal parts of BCP 2 part Megapoxy #3 to a smooth grey paste #4
5. Place a reasonable amount of paste into the hole that you have drilled
6. Coat a small amount around the corrugated part of the step iron #5
7. Push the step iron in and gently tap the step iron in using a piece of timber to protect the plastic coating
8. Finish it off by smoothing around the step iron and the back of the pit or riser #6
#1 #2 #3 Part No. 8314160
#4 #5 Part No. 8505906 #6
Better Concrete Products Pty Ltd, ABN 77 685 113 842 trading as