PHY121 Summer Session I, 2006 • Most of information is available at: http://nngroup.physics.sunysb.edu/~chiaki/PHY121-06 . It will be frequently updated. Homework assignments for each chapter due a week later (norm and are delivered through WebAssign. Once the deadline has p you cannot input answers on WebAssign. To gain access to WebAssign, you need to obtain access code go to http://www.webassign.net . Your login username, institu name and password are: initial of your first name plus last (such as cyanagisawa), sunysb, and the same as your username respectively. In addition to homework assignments, there is a reading requi of each chapter, which is very important. e lab session will start next Monday (June 5), for the first o to A-117 at Physics Building. Your TAs will divide each gro nto two classes in alphabetic order. Instructor : Chiaki Yanagisawa
23
Embed
PHY121 Summer Session I, 2006 Most of information is available at: chiaki/PHY121-06.chiaki/PHY121-06.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PHY121 Summer Session I, 2006
• Most of information is available at: http://nngroup.physics.sunysb.edu/~chiaki/PHY121-06. It will be frequently updated.• Homework assignments for each chapter due a week later (normally) and are delivered through WebAssign. Once the deadline has passed you cannot input answers on WebAssign. To gain access to WebAssign, you need to obtain access code and go to http://www.webassign.net. Your login username, institution name and password are: initial of your first name plus last name (such as cyanagisawa), sunysb, and the same as your username, respectively.
• In addition to homework assignments, there is a reading requirement of each chapter, which is very important.
• The lab session will start next Monday (June 5), for the first class go to A-117 at Physics Building. Your TAs will divide each group into two classes in alphabetic order.
The Building Blocks of Matter History of model of atoms
electrons e-
nucleus (protons and neutrons)
Old view
Modern view
nucleusquarks
prot
onSemi-modern view
Dimensional Analysis In physics, the word dimension denotes the physical nature of a quantity
• The distance can be measured in feet, meters,… (different unit), which are different ways of expressing the dimension of length.
• The symbols that specify the dimensions of length, mass and time are L, M, and T.
dimension of velocity [v] = L/T (m/s) dimension of area [A] = L2 (m2)
Dimensional Analysis In physics, it is often necessary either to derive a mathematical expression or equation or to check its correctness. A useful procedure for this is called dimensional analysis.
• Dimensions can be treated as algebraic quantities:
dimension of distance [x] = L (m) dimension of velocity [v] = [x]/[t] = L/T (m/s) dimension of acceleration [] = [v]/[t] = (L/T)/T = L/T2 = [x]/[t]2 (m/s2)
Uncertainty in Measurement In physics, often laws in form of mathematics are tested by experiments. No physical quantity can be determined with complete accuracy.
• Accuracy of measurement depends on the sensitivity of the apparatus, the skill of the person conducting the measurement, and the number of times the measurement is repeated.
• For example, assume the accuracy of measuring length of a rectangular plate is +-0.1 cm. If a side is measured to be 16.3 cm, it is said that the length of the side is measured to be 16.3 cm +-0.1 cm. Therefore, the true value lies between 16.2 cm and 16.4 cm.
Significant figure : a reliably known digitIn the example above the digits 16.3 are reliably knowni.e. three significant digits with known uncertainty
Uncertainty in Measurement (cont’d)
• Area of a plate: length of sides 16.3+-0.1 cm, 4.5+-0.1 cm
The values of the area range between (16.3-0.1 cm)(4.5-0.1 cm)= (16.2 cm)(4.4cm)=71.28 cm2
=71 cm2 and (16.3+0.1 cm)(4.5+0.1 cm)=75.44 cm2= 75 cm2.
The mid-point between these two extreme values is 73 cm2 with uncertainty of +-2 cm2 .
Two significant figures! (Note that 0.1 has only one significant figure as 0 is simply a decimal point indicator.)
Uncertainty in Measurement (cont’d)
1) In multiplying (dividing) two or more quantities, the number of significant figures in the final product (quotient) is the same as
the number of significant figures in the least accurate of thefactors being combined, where least accurate means having thelowest number of significant figures.
Two rules of thumb to determine the significant figures
• Area of a plate: length of sides 16.3+-0.1 cm, 4.5+-0.1 cm16.3 x 4.5 = 73.35 = 73 (rounded to two significant figures).
three (two) significant figuresTo get the final number of significant digit, it is necessaryto do some rounding: If the last digit dropped is less than 5,simply drop the digit. If it is greater than or equal to 5, raisethe last retained digit by one
Uncertainty in Measurement (cont’d)
• A sum of two numbers 123 and 5.35: 123.xxx
+ 5.35x ------------
128.xxx123 + 5.35 = 128.35 = 128
zero decimal placestwo decimal places
zero decimal places
2) When numbers are added (subtracted), the number of decimalplaces in the result should equal the smallest number of decimalplaces of any term in the sum (difference).
A lesson learned : Since the last significant digit is only one representative from a range of possible values, this amount of discrepancies is expected.
Conversion of Units
• Some typical unit conversions 1 mile = 1,609 m = 1.609 km, 1 ft = 0.3048 m = 30.48 cm
1 m = 39.37 in. = 3.281 ft, 1 in. = 0.0254 m = 2.54 cm
• Example 1.4 28.0 m/s = ? mi/h
mi/s 1074.1m 1609
mi 00.1
s
m 28.0 m/s 0.28 2
Step 1: Conversion from m/s to mi/s:
Step 2: Conversion from mi/s to mi/h:
mi/h 6.62h
min0.60
min
s0.60
s
mi101.74 mi/s 1074.1 2-2
Since we use more than one unit for the same quantity, it is often necessary to convert one unit to another
Estimates and Order-of Magnitude
• Examples
- 75 kg ~ 102 kg (~ means “is on the order of” or “is approximately”)
- = 3.1415…~1 (~3 for less crude estimate)
For many problems, knowing the approximate value of a quantity within a factor of 10 or so is quite useful. This approximate value is called an order-of-magnitude estimate.
Estimates and Order-of Magnitude
• Example 1.6 : How much gasoline do we use?Estimate the number of gallons of gasoline used by all cars in theU.S. each year
Step 1: Number of cars cars 10~n)cars/perso (0.5people) 1000.3( 88
Step 2: Number of gallons used by a car per year
car
gal/yr10
galmi
10
carmi/yr10
mi/gal
driven mi of#
car
gal/yr# 3
4
Step 3: Number of gallons consumed per year
gal/yr 10)car
gal/yr(10cars) (10~gal# 1138
Estimates and Order-of Magnitude (cont’d)
• Example 1.8 : Number of galaxies in the UniverseInformation given: Observable distance = 10 billion light year (1010 ly)
14 galaxies in our local galaxy group 2 million (2x106) ly between local groups
1 ly = 9.5 x 1015 m
Volume of the local group of galaxies: 318363lg 10)10(~
3
4lylyrV
Number of galaxies per cubic ly:
317
318lg
310
10
10~
galaxies of #galaxies of #
ly
galaxies
ly
galaxies
Vly
Volume of observable universe:3303103 10)10(~
3
4lylyrVu
Number of galaxies in the Universe:
galaxieslyly
galaxiesV
ly u 10)10(10galaxies of #
~ galaxies of # 133303
173
Coordinate Systems
• Cartesian coordinate system
A point in the two dimensional Cartesian system is labeled with the coordinate (x,y)
Locations in space need to be specified by a coordinate system
Coordinate Systems (cont’d)
• Polar coordinate system
A point in the two dimensional polar system is labeled with the coordinate (r