This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
LAMP CONTROL GEAR Fluorescent Ballasts 45Halogen Transformers 47Luxsense, Occuswitch 48HID Control Gear and Gear Trays 49
LAMPS General Lighting Service - GLS 51Pilot 53Decorative 54Reflector 57Halogen 59Tubular Fluorescent 64Compact Fluorescent Energy Savers 68HID Metal Halide 71HID Sodium 75HID Mercury 77Special Application and Miscellaneous Lamps 78Lamp Information Guide 82
REFERENCE PAGES IP Chart 89Explanation of Philips Type Numbers 90Chemical Resistance Table 91Alphabetical Index 92
CONTENTS
PRICING EFFECTIVE 1 August 2005
REPLACES ALL PREVIOUS PHILIPS LIGHTING PRICE BOOKS.
Price list effective from 1 August 2005.
This PRICE LIST replaces all previous pricing published by Philips Lighting.
All prices shown are suggested selling prices only. There is no obligation to comply with the suggested price.
All illustrations, information and specifications presented and referred to hereinare believed to be correct at the time of publication.Attachments to some products are optional and available at additional cost.
Philips Lighting reserves the right to make changes from time to time withoutnotice or obligation in the specifications, design, colour or materials.Philips Lighting reserves the right to change and discontinue products.
It is important to ensure that Philips lamps are operated correctly.Other than incandescent types, most lamps are designed for, andmust be operated on, a correct control system for optimum performance.
Additional details and specifications are available from Philips Lighting
on request. Or refer to the Philips Lighting Asia Pacific catalogue on-line at
www.lighting.philips.co.nz
www.lighting.philips.co.nz
4
IMPORTANT INFORMATION
All measurements shown in millimetres unless otherwise stated.
All due care has been taken to ensure that pricing and technical details listed in this price guide are correct, however should any errors be found, Philips Lighting reserves the right to make alterations without notice.
GUARANTEE AND WARRANTY: Philips will replace any lamp which is installed in accordance with our recommendations and which fails within 12 months of the date of purchase, or within the number of burning hours specified for that lamp, whichever comes first. Lamps which fail after the number of burning hours specified for that particular lamp, but within 12 months of the date of purchase, will be replaced, but the lamp will be charged for at a reduced rate. Philips will repair or replace all luminaires and components, other than lamps, that have been installed according to the manufacturer's specifications that fail or are proven faulty under normal conditions of use within 12 months from the date of installation. Except on goods where a specific guarantee period has been stated, e.g. e-battens TM
( 5-years). This warranty does not include the cost of labour in replacing any faulty luminaires or components.
TMS212 e-battenTM Electronic• The Philips TMS212 is a well designed quality batten in single and twin fluorescent lamp versions
for general lighting applications.
• TL-D 18w, 36w and 58w options.
• All TMS212 electronic battens are equipped with high quality Philips electronic ballasts that offer a truly economic,
light weight fluorescent luminaire. (TMS212 low loss batten is equipped with a b2 ballast)
• Just one electronic ballast controls the entire fitting (electronic versions).
• Standard accessories include prismatic diffuser, industrial and asymmetric reflectors and wire guards.
• The TMS212 comes with a 5 year guarantee on both gear and housing.
• Ready to install, no hum, no flicker. Rapid start and energy efficient.
· Takes twin energy saving TL-D Linear fluorescent lamps
· Diffusers suspendable on end caps allowing easy lamp replacement
· Surface mounted via keyholes
· Housing, white powder painted steel
The Philips TCS125 Modella is a luminaire designed for TL-D linear fluorescent lamps. It comes with an aesthetic, unique design which perfectly harmonizes with most interiors. It also comes with smooth, easy to clean opal covers. The covers suspendable on the endcaps,allow easy lamp replacement without tools. Lamps not included.
· Small offices
· Service Areas (restaurants, cafeterias)
· Contemporary slim design 63mm body depth
· Compliments most interiors
· Opal diffuser (acrylic)
· IP20 Class I
· Comes standard with electronic ballasts.
· Schools, Childcare Centres · General open plan offices
Dimming, DALI, and Emergency options on request.
High performance luminaire for one or two TL- D fluorescent lamps
with a wide range of optics for direct lighting. The luminaire
has an innovative and stylish design. Developed with ease of installation
in mind, it can be surface mounted individually without removing the
optic and lamp during installation.
Additional emergency, HF-R dali and TL-5 options available on request.
FU: Fused
Type A (mm)
TCS 398 1/2x36w 1263
TCS 398 1/2x58w 1563
TCS 398 1/2x28w 1211
TCS 398 1/2x35w 1511
Applications
M2 louvre provides high level of vertical illumination. Suitable for retail, public spaces. Lamps not included.
· Retail and Dept Stores · Corridors and staircases
· Schools, Childcare Centres · General offices
D6 is a low brightness louvre to CIBSE LG3 Cat2. Suitable for offices and meeting rooms and areas where VDU screens may be
used.
Recessed FluorescentX-Tend TBS669
· Conference rooms · Reception and public service areas
597 74
297 74
The Philips TBS669 is a range of recessed TL5 luminaries that feature superior optics with Philips patented 3 dimensional Omni-directional Luminance Control (OLC). This feature provides excellent performance in terms of efficiency, uniformity and glare control.A range of Mirror Optic options is available. The fitting is mounted on a T-bar.
BODY SIZE DIMENSIONS
X-Tend TBS369 Electronic
TYPE CUT OUT SIZE BODY SIZE (mm)
TBS369418 573 X 573 597x597x74
TBS369236 1175 X 272 1197x297x74
TBS369336 1175 X 573 1197x597x74
M2 Louvre provides high level of vertical illumination. Suitable for retail, public spaces etc.
D6 is a low brightness louvre to CIBSE LG3 Cat2. Suitable for offices and meeting rooms and areas where VDU screens may be used
etc.
SWING OUT BRACKET
The Philips TBS369 range is a recessed mounted luminaire which offers excellent light, technical performance on efficiency, uniformityand glare control. The TBS369 incorporates the patented Omnidirectional Luminaire Control (OLC) mirror optics. This provides superior performance in terms of efficacy, glare control, lamp shielding, spacing and uniformity. The X-tend recessed luminaries can be installed to practically all ceiling types including T-rail and plaster. Low height module of 75mm makes it ideal for tight spaces.Emergency, HF-R dimmable and HF-R dali options available on request. TBS369 comes complete with optic, choice of three options M2,M6, D6. Fluorescent tubes must be ordered separately.
TBS168 ElectronicThe Philips TBS168 is a functional modular luminaire for TLD fluorescent lamps with M5 Semi Spec Optic.TBS168 is suitable for exposed ceilings. Lamps not included.
Further Emergency and HF-R options available upon request
Recessed FluorescentTBS088
A recessed mounted fluorescent ceiling luminaire for general lighting purposes in areas that require a bright yet comfortable lighting effect. T-Rail or plaster ceiling mount with metal framed prismatc diffuser spring clips for easy lamp maintenance. 0.5mm high strength cold rolling steel plate and powder spray painting on entire housing. Lamps not included.
A recessed mounted troffer for TL-D fluorescent lighting with prismatic sheet, TBS704 should be installed in standard metric exposed T-rail systems only. When installing to Centricity rail systems a separate larger diffuser must be ordered. The luminaire is supplied with an unframed prismatic diffuser. The e-box range is also available on request for HF dimming, dual circuit and emergency applications. Just one electronic ballast controls the entire fitting. Lamps not included.
TBS704 e-boxTM
A (mm) B (mm) C (mm)1211 1306 248
1211 1306 248
1263 1358 248
1263 1358 248
1511 1606 248
1511 1606 248
1563 1658 248
1563 1658 248
INLINE COUPLER
M2 louvre provides high level of vertical illumination. Suitable for retail, public spaces.
TPS498258HFRM6D TPS498 2xTL-D58w HFR M6 FU DIRECT 1 $ 380.00
TPS498236M6DI 1 $ 200.00
TPS498258HFPM6DI TPS498 2XTL-D58w HF-P M6 FU DIRECT/INDIRECT 1 $ 280.00
TPS498236HFRM6DI TPS498 2xTL-D36w HF-R M6 FU DIRECT/INDIRECT 1 $ 320.00
TPS498258M6DI 1 $ 220.00
D6 is a low brightness louvre to CIBSE LG3 Cat 2. Suitable for offices and meeting rooms and areas where
VDU screens may be used.Philips Philips Pack Price Code Product Description Size Each TPS498236D6D 1 $ 270.00
TPS498258D6D 1 $ 280.00
TPS498158D6DI 1 $ 270.00
TPS498236D6DI 1 $ 280.00
TPS498258D6DI 1 $ 285.00
TPS498258HFRD6DI TPS498 2xTL-D58W HF-R D6 FU DIRECT/INDIRECT 1 $ 380.00
TPS498135HFPD6DI 1 $ 300.00
TPS498235HFPD6DI 1 $ 310.00
Accessories for TPS498 rangePhilips Philips Pack Price Code Product Description Size Each ZPH300US ZPH300 US SUSPENSION SET 1 $ 35.00
ZPH498CP ZPH498 CP XTEND 1 $ 15.00
ZPH498CD ZPH498 FLEXIBLE CABLE DUCT 1 $ 98.00
TPS498 2xTL-D58W EB-S D6 FU DIRECT/INDIRECT
TPS498 1xTL-535W HF-P D6 FU DIRECT/INDIRECT
TPS498 2xTL-535W HF-P D6 FU DIRECT/INDIRECT
TPS498 2xTL-D36W EB-S D6 FU DIRECT
TPS498 2xTL-D58W EB-S D6 FU DIRECT
TPS498 1xTL-D58W EB-S D6 FU DIRECT/INDIRECT
TPS498 2xTL-D36W EB-S D6 FU DIRECT/INDIRECT
Type
Suspended FluorescentX-Tend TPS498
TPS498 1X28/54 W
BODY SIZE DIMENSIONS
TPS498 2/1X28/54 W
TPS498 1X36 W
TPS498 2/1X36 W
TPS498 1X35/49 W
TPS498 2xTL-D58w EB-S M6 FU DIRECT/INDIRECT
TPS498 2xTL-D58w EB-S M2 FU DIRECT/INDIRECT
TPS498 2xTL-D36w EB-S M6 FU DIRECT
TPS498 2xTL-D58w EB-S M6 FU DIRECT
TPS498 2xTL-D36w EB-S M6 FU DIRECT/INDIRECT
M6 is a low brightness louvre to CIBSE LG3 Cat 3. Suitable for general offices and meeting rooms.
The Philips TPS498 is a high performance suspended luminaire for TL-D or TL'5 fluorescent lamps with a choice of three optics. TPS498 offers a choice of direct or indirect lighting. The luminaires can be individually suspended or suspended by coupling together. The TPS498 offers design flexibility with a system of straight or flexible cable to allow the luminaires to be connected in patterns to follow the contour of the area to be lit. Manufactured of aluminium with plastic end caps. Emergency, HF-R dimmable, HF-R dali and T5 versions available upon request. Lamps not included. Direct: direct downward light output D/I: direct/indirect, downward and upward light output
TPS498 2xTL-D36w EB-S M2 FU DIRECT
TPS498 2xTL-D58w EB-S M2 FU DIRECT
TPS498 2xTL-D36w EB-S M2 FU DIRECT/INDIRECT
TPS498 2/1X35/49 W
TPS498 1X58 W
TPS498 2/1X58 W
FLEXIBLE CABLE DUCT
Pacific 'NO CLIP'
Type A (mm) B (mm) C (mm)
TCW216 1XTLD18W 425+/-75 320 690
TCW216 2XTLD18W 425+/-75 320 690
TCW216 1XTLD36W 850+/-75 600 1300
TCW216 2XTLD36W 850+/-75 600 1300
TCW216 1XTLD58W 850+/-75 600 1600
TCW216 2XTLD58W 850+/-75 600 1600
TCW216 Pacific ElectronicPhilips Philips Pack Price Code Product Description Size Each TCW216218HFP WATERPROOF POLYCARBONATE FOR 2 X 18W HF-P ELECTRONIC 1 129.00$TCW216136E WATERPROOF POLYCARBONATE FOR 1 X 36W HF-B ELECTRONIC 1 122.50$TCW216236E WATERPROOF POLYCARBONATE FOR 2 X 36W HF-B ELECTRONIC 1 135.00$TCW216158E WATERPROOF POLYCARBONATE FOR 1 X 58W HF-B ELECTRONIC 1 124.35$TCW216258E WATERPROOF POLYCARBONATE FOR 2 X 58W HF-B ELECTRONIC 1 135.00$
TCW216 Emergency Battens refer to Emergency Section page 30.
WeatherproofTCW216 Pacific Electronic
Body Size Dimensions
This range of waterproof luminaires has been designed to make installation easier and faster than ever before. NZ's first NO CLIPwaterproof luminaire. Higher output means you can use less fittings for the same amount of light. IP65 or IP67 rated with cable gland installed. HF-B Ballast used for conditions -10 to +40 degrees celsius.
The Philips Pacific B2 under verandah batten is still the same product as the HFB version and still comes with
NO CLIPS. The only difference is it has a IC B2 low loss ballast.
Main Features
· Ready to install includes cable
· B2 not to be used in -0 degrees celsius conditions
· HFB used -10 to +40 degrees celsius conditions
Philips Philips Pack PriceCode Product Description Size EachTCW216218B2 TCW216 2XTL-D18W IC B2 FU SI 1 88.95$
TCW216136B2 TCW216 1XTL-D36W IC B2 FU SI 1 89.95$
TCW216236B2 TCW216 2XTL-D36W IC B2 FU SI 1 101.95$
TCW216158B2 TCW216 1XTL-D58W IC B2 FU SI 1 91.95$
TCW216258B2 TCW216 2XTL-D58W IC B2 FU SI 1 119.95$
For polycarbonate diffuser and acrylic diffuser options refer to pg 16.
For TCW216 Emergency Battens refer to Emergency Section page 30.
conditions, -30 degrees Celsius. Ideal for cold store room areas.
IC: Capacitor. LW: Low loss ballast. R: Mirror. CS: Coldstore.
Philips Philips Pack PriceCode Product Description Size EachTCW596258 TCW596 2XTL-D 58W IC LW R EST CS 1 320.00$
WeatherproofTCW216 Pacific B2
· Dust & Moisture protected IP66 · Ready to install includes cable
· Impact protected · Emergency options available
· Fibre-glass reinforced polyester housing · Series Igniter (SI)
· Clear polycarbonate prismatic cover
· Fused connection block (FU)
· Lamps: 1 & 2 TL’D fluorescent
· No Clips
TCW596 Pacific ColdstoreA pacific waterproof luminaire specifically designed to be used in extreme
DCG Reflector Spot Range
The Philips DCG Spot is a sleek aesthetic and highly practical range of spotlights
for use with Philips 75W R80 reflector lamps. Ideal in domestic applications
such as main living areas, bedrooms and kitchens. Lamps not included.
Philips Philips Pack Price Code Product Description Size Each DCG100 SINGLE WHITE R80 75W ES E27 SPOT 1 19.00$
DCG200 DOUBLE WHITE R80 75W ES E27 SPOT 1 36.25$
DCG300 TRIPLE WHITE R80 75W ES E27SPOT 1 49.20$
QHF560 Security Light
Philips Philips Pack Price Code Product Description Size Each QHF560B QHF560 BLACK TWIN SECURITY LIGHT 1 35.95$
Philips Philips Pack Price Code Product Description Size Each 60PHILKOMBI 60W LUMINAIRE SUPPLIED COMPLETE WITH 60 WATT LAMP 1 60.45$
GLB100 Downlight
Lamp included.
Philips Philips Class Cut Out Pack Price Code Product Description Size (mm) Size Each GLB100 WHITE GLS DOWNLIGHT C/W 100W ES LAMP CA 125 1 27.50$
A downlight for the GLS lamp range, this high quality incandescent downlight is designed for the 100w ES incandescent lamp. Thedownlight comes complete with quick release steel clips to avoid soft ceiling damage. Made from white polycarbonate anti-glare baffle and white paintable ceiling ring with an anodised aluminium reflector.
The Philips Philinea is a slim-line matched lamp and luminaire combination for practical incandescent linear lighting. Creating a soft, warm atmosphere, it is ideal for bathroom lighting and mirror lighting.
The Philips QHF560 is a compact flexible security light which can be mounted on walls or under eves. The QHF560 consists of twoweatherproof lamp holders and seals. IP44, It has an adjustable PIR movement activated sensor with a 12metre area of coverage at 110º.
Kombi packs include 2x PAR38 120w lamps.
Domestic Lighting
· Under cupboards, benches and pantries
· Strip lighting mirrors for shadow and glare free lighting.
60 PHIL KOMBI60 PHIL KOMBI
80 degree external adjustability
Fugato
Main Features
- Three beam choices narrow, medium, wide beam
1 2
1. Mounting frame comes with the downlight for straight forward installation
2. Standard push-in plug for speed and convenient connection outside the housing
Philips Philips Pack Price Code Product Description Size Each
The Fugato downlight is an adjustable downlight that offers internal and external adjustability.IC: Conventional compensated gear. WH: White finish
- Compact for 175mm cut-outs
The Philips Fugato Cardanic offers important specification improvements. The light cache prevents looking into the ceiling plenum as well as avoiding spill light. Tilt to 40 degrees. Specifically designed for CDM-R111 Mastercolour.
DownlightingFugato
The Philips range of Fugato downlights have been developed for use in retail outlets, offices and public areas. The Fugato givesdesigners the freedom to use relatively small circular luminaires while maintaining the excellent output, efficiency and glare shielding properties usually associated with larger square luminaires.
40 degree internal adjustability
Star-e and Tilta-e
Main Features• A twist and pull out front assembly for easy lamp access
• The Star-e version holds the lamp in a fixed ‘downward’ position
• The Tilta-e incorporates a 15 degree tilt action to create wall wash effect
• The Star-e and Tilta-e can be ordered as separate components or as complete kombi units
• 20 and 50 pack Kombi options only
Materials and Finish• Die cast aluminium • Heatcans not supplied
• Formed steel mounting clips
Classifications• IP 20 • Transformer complies with: IEC1046
• Class 1 • NZCP Rating downlight: CS
Applications• General Indoor areas • Corridors • Hotels
• Office reception areas • Retail areas • Residential areas
• Lift Lobby areas • Conference rooms
Philips Philips NZCP Cut -Out Pack Price Code Product Description Rating mm Size Each QBS050-1 STAR-E DOWNLIGHT WHITE (EXCLUDES LAMP & TRANSFORMER) CS 70-72 1 5.95$
The Star-e and Tilta-e range are a quality fully recessed low voltage downlight selection for 12 Volt dichroic lamps, providing brilliant white halogen lighting for a variety of different applications. Cost effective with good lamp life; the Star-e and Tilta-e range provide an economic lighting solution for both domestic and commercial environments.
New20 & 50 Kombi
Options
Star-e Tilta-e
Dimensions in mm
NewTilta-e
Now Available inBrushed
Chrome
Dimensions in mm
New20 & 50 pack
Kombi Options
Star-e Tilta-e
Dimensions in mm
NewTilta-e
Now Available inBrushed
Chrome
Dimensions in mm
IP44 RATED
Europa2
Main Features
Simple mounting click system Premounted energy-saving lamps Adjustable spring clip To save installation time.
for mounting the Europa2 Lamps included in the price.
in ceilings 3 to 24 mm thick.
Push connector For easy looping and
Facetted metallised reflector safe installation.
To ensure increased
light efficiency and Wieland ST-17 connector well controlled Quick and easy connector
light distribution. to save installation time.
Orientable lamp holder More light with less energy(For 26w & 18w versions) The philips environmental
For easy lamp replacement. product design rules are used to develop Europa2.
Application Areas
· Office Areas · Industrial Areas
· Retail Areas · Outdoor under canopy - IP44 rated
GBS122O 1 20.95$ GBS122P GBS122 P LIGHT CONTROL PANEL FOR FBS122 1 12.95$ GBS120DR 1 27.75$ GBS120L 1 19.95$ GBS120O 1 24.95$ GBS120P 1 13.65$
ZBS122 O OPAL DIFFUSER FOR FBS122
ZBS120 DR ALU DECO RING FOR FBS120
ZBS122 DR ALU SMALL DECO RING FOR FBS122
GBS120 O OPAL DIFFUSER FOR FBS120
GBS120 P LIGHT CONTROL PANEL FOR FBS120
FBS120 2XPL-C/2P26W/840 I 230/240V PG W2
Attachments
GBS120 L CROSS LOUVRE FOR FBS120
Downlighting
FBS122 2XPL-C/2P13W/840 I 230V PG W2 WH
FBS120 2XPL-C/2P18W/840 I 230V PG W2 WH
Europa2 Downlights
The Philips Europa2 is a brand new downlight range that provides better light efficiency with its metallised reflector and pre-mounted energy saving lamps. Facetted optical control to CIBSE LG3 Cat2. Europa2 is light weight, easy to install, includes lampsand comes with a range of accessories upon request. Emergency and HF-R dimming options available upon request.
Point 374
Dimensions Point 20 Dimensions Point 25
Point 20 250mm outside rim diameter and in ceiling height of 100mm, ideal for low height.Philips Philips Cut Out Pack Price Code Product Description Size (mm) Size Each 374FBH213 LOW HEIGHT DOWNLIGHT FOR 2x13W PL-C 225 1 209.00$374FBH118 LOW HEIGHT DOWNLIGHT FOR 1x18W PL-C 225 1 167.85$374FBH218 LOW HEIGHT DOWNLIGHT FOR 2x18W PL-C 225 1 233.45$374FBH126 LOW HEIGHT DOWNLIGHT FOR 1x26W PL-C 225 1 211.00$374FBH226 LOW HEIGHT DOWNLIGHT FOR 2x26W PL-C 225 1 237.45$
Point 25 290mm outside rim diameter and in ceiling height of 175mm.Philips Philips Cut Out Pack Price Code Product Description Size (mm) Size Each 374FBS242HFPP25 DOWNLIGHT FOR 2 X 42W PL-T(HF) 265 1 368.70$
Accessories
Cover Ring Ring Grating
Cover Ring steel covering painted metal grey
Philips Philips Pack Price Code Product Description Size Each 37011/20 COVER RING FOR POINT 20 1 53.80$ 37011/25 COVER RING FOR POINT 25 1 53.80$
Philips Philips Pack Price Code Product Description Size Each 37003/20 LOUVRE RING AND GRATING FOR POINT 20 1 72.70$
37003/25 LOUVRE RING AND GRATING FOR POINT 25 1 84.00$
Ring Grating metal coated plastic grating, painted metal grey. Extra glare control for point 20
Philips Philips Pack Price Code Product Description Size Each 37005/20 RING GRATING FOR LOW HEIGHT POINT 20 1 90.50$
Accent Glass matt centre glass 6mm thick, fastening with three springsPhilips Philips Pack Price Code Product Description Size Each 370ZZS DGPM MATT CENTRE GLASS FOR POINT 20 1 78.65$
Accent Glass and Loft Ring matt centre glass 6mm thick with steel covering
Philips Philips Pack Price Code Product Description Size Each 370ZZS DGMR MATT GLASS AND RING FOR POINT 20 1 142.00$
DownlightingPoint 374
The Philips Point Range is a 'designer' option for compact fluorescent lamps. With Point, the space can be illuminated evenly orcertain areas can be accentuated, e.g. by the narrower light distribution. Another alternative is to position the lights where they are needed, resulting in energy savings while accentuating the area and making it easier to view. Lamps not included.
Accent Glass, and Accent Glass with Loft Ring
Parabolic Louver Grating
MBS205 Metal Halide HID Range
A standard recessed downlight with a wide lighting distribution designed for use with double ended metal halide
lamps. The MBS205 comes complete with remote aluminium control gear with a heat-sink blade to eliminate
overheating of the ballast. Direct lamp access is done by removing the decorative ring with protective glass.
Cut out diameter 245mm. Thickness of ceiling 1-30mm. Lamp not included.
Philips Philips Cut-Out Pack Price Code Product Description mm Size Each MBS205150TD DOWNLIGHT FOR 150W CDM-TD 245 1 357.25$
MBS205070TD DOWNLIGHT FOR 70W CDM-TD 245 1 324.45$
FBH058 / FBH059
Type A (mm)
FBH058 245
FBH059 320
Main Features• Integral control gear housing • Easy access cable feed
• Back pressed metal gear housing • Push in terminal block• Single or Twin lamp options (lamps not included)
Philips Philips Cut Out Pack Price Code Product Description Size (mm) Size Each FBH058/118 FBH058 1XPL-C18W DOWNLIGHT 172-175 1 $66.95
A standard recessed downlight that comes complete with integral control gear, for operating fluorescent energy saving Master PL-C fluorescent lamps. Compact housing with satin silver finish reflector and slim white finishing ring.
DownlightingProfessional Recessed
192 96
BODY SIZE DIMENSIONS
258 132
B (mm) C (mm)
Garnea Pendant Luminaire
Grey Metal Small Prismatic
Philips Philips Pack Price Code Product Description Size Each FPK630PLT42SPR 42W PL-T (HF) C/W SMALL PRISMATIC REFLECTOR 1 621.80$ MPK630CDMT70SPR 70W CDM-T C/W SMALL PRISMATIC REFLECTOR 1 703.30$ MPK630CDMT70GRMR 70W CDM-T C/W GREY METAL REFLECTOR 1 778.00$ MPK630CDMT150GRMR 150W CDM-T C/W GREY METAL REFLECTOR 1 753.25$ MPK640CDMT150PR 150W CDM-T C/W GREY PRISMATIC REFLECTOR 1 1,085.00$ ZCZ643GR BASE PLATE FOR FPK630 GREY 1 90.00$
MCN810
Philips Philips Pack Price Code Product Description Size Each MCN81070 MCN810 1XCDM-T70W IC/230V BASE PLATE WHITE 1 223.00$ MCN810150 MCN810 1XCDM-T150W IC/230V BASE PLATE WHITE 1 254.00$
The Philips Garnea is a functional, decorative, and easy to install medium bay indoor luminaire with integral control gear. It offers an aesthetically pleasing design that offers design flexibility and functionality. Mix-and-match design options with two basic design types metal or prismatic for a range of lamp types. Delivered with 2.5m adjustable suspension cables, and protective glass. Base plate needs to be ordered separately. Ideal for small retail areas and foodstores. Metal Grey. Installation: direction ceiling on baseplate. Lamp not included.
The Philips HID Projector is for installation heights of 3-4metres. Extruded aluminium housing. Excellent heat dissipating effect. Protective glass. For installation in display areas, showrooms, boutiques, supermarket fresh food areas. Non adjustable. Lamp not included.
Pendant LightingGarnea
HID Projector
MCS CDM-T MCS CDM-TD QCS
Main Features
- Three versions that can accommodate a total of five lamp types.
- CDM-TD 70W/150W
- CDM-T 70W/150W - Halogen 300W
- Optimal light technical performance with accurate beam spread control.
- Modularity and flexibility in focusing the light.
- Aluminum housing neatly finished in white
- Ease of installation, three easy steps and no special tools required.
Step 1 Step 2 Step 3A - fix baseplate C - connect to push-in
D - fix cover plate F - switch on the lamp
Philips Philips Pack Price Code Product Description Size Each QCS400TH300 MONZA 1XHAL-TDS300W BA WH 1 125.00$
MCS420CDMTD70 MONZA 1XCDM-TD70W IC 230V BA WH 1 335.00$ MCS440CDMTD150 MONZA 1xCDM-TD150W IC 230V BA WH 1 355.00$ MCS440CDMT70 MONZA 1XCDM-T70W IC 230V BA WH 1 335.00$ MCS450CDMT150 MONZA 1XCDM-T150W IC 230V BA WH 1 355.00$
Combining elegance with modern functional design, the new MONZA projectors are the ideal choice for direct and indirect lighting.Lamp not included.
Capable of accommodating several single and double ended lamp types, the series meets the requirements of a broad range of lighting applications, from general lighting in stores, shops and supermarkets, to accent lighting such as showroom displays.
E - insert the lamp
B - wireup/terminate
QWG/FWG/MWG
FCG/BCG
Applications
- Halogen 300w - CDM-TD 70w/150w
- PL-C 2x26w - TL-5 22w/40w
Philips Philips Pack Price Code Product Description Size Each QWG622300 QWG622 1xHAL-L300W A DG WH 1 385.00$
FWG620226HF FWG620 2XPL-C26W/4P HF A DG WH 1 480.00$ MWG620150TD MWG620 1XCDM-TD150W IC A DG WH 1 570.00$ MWG62070TD MWG620 1XCDM-TD70W IC 230V DG WH 1 525.00$
The Philips Adante Uplighter is a decorative wall-mounted up-lighter for Halogen 300w, 2x26w compact fluorescent and 70/150w CDM-TD Mastercolour lamps. It is housed in an aluminium white body. An asymmetrical aluminium reflector combined with an adjustable cut-off ruler creates a harmonious atmosphere. Adante provides everything that is required to emphasis and enhance architectural design. Unobtrusive and utilising a sleek design, it allows subtle lighting effects enhancing the direction and geometry of space. Lamp not included.
Adante complements the general lighting in offices, conference rooms, reception areas, boutiques, fashion shops, and public areas
Adante Uplighter
Ease of Installation and maintenance is possible due to a specific technical base plate (BA)
Diffuser Configurations
Ceiling Mounted Double Sided
9 10 11
Millennium Range
Elips - Recessed & SurfaceLightweight aluminium. Fitted with T2 8W high output fluorescent lamps. High frequency control.
Philips Philips Pack Price Code Product Description Size Each ELIPSWL2130/5-10 ELIPS 8W SINGLE SIDED MAINTAINED RECESSED MOUNTED 1 816.00$
ELIPSWL2100/5-10 ELIPS 8W SINGLE SIDED MAINTAINED SURFACE MOUNTED 1 816.00$
Optek - Wall & CeilingCurved diffusers are easy to read in various light levels. Maintained/non-maintained.
Lightweight but strong polycarbonate. Fitted with economical T6 or T2 8W fluorescent lamp.
Philips Philips Pack Price Code Product Description Size Each OPTEKWL2160/1-4 OPTEK 8W SINGLE SIDED WALL MOUNTED 1 289.60$
Spectro - Wall & CeilingSuspended for wall or ceiling mounting.
Made of lightweight aluminium for slim
appearance. Fitted with 8W and 13W TL2
fluorescent tubes for high light output.
High Frequency Control.
Philips Philips Pack Price Code Product Description Size Each SPECTROWL2040/5 SPECTRO 13W SINGLE SIDED CEILING MOUNTED MAINTAINED 1 827.00$
SPECTROWL2000/5 SPECTRO 8W WALL MOUNTED - FIXED MOUNT 1 875.00$
Emergency Lighting
Made from high grade materials, quality and design are the distinction making the range suitable for the most demanding forms ofarchitecture. Clear pictograms and light source blend discreetly with interior design.
The Philips code suffix is linked to the legends shown below: eg WL2160/3. PLEASE INDICATE WHICH DIFFUSER OPTION YOU REQUIRE WITH EACH EXIT LUMINAIRE AT THE TIME OF ORDERING.
All versions are fitted with 70' high temperature nickel cadmium batteries, unless indicated otherwise. Designed with compliance to AS/NZS2293, 1998 Pt1, these emergency fittings provide 90 minute duration periods.
EXIT
�
Wall Mounted
�EXIT EXIT EXIT
� �
1 2 3 4
EXITEXIT
�
Wall Mounted
�EXITEXIT EXITEXIT EXITEXIT
� �
1 2 3 4
EXIT
�
Ceiling Mounted Single Sided
�EXIT EXIT EXIT
� �
5 6 7 8
EXITEXIT
�
Ceiling Mounted Single Sided
�EXITEXIT EXITEXIT EXITEXIT
� �
5 6 7 8
�EXIT EXIT
�EXITEXIT EXITEXIT EXIT
� �EXITEXIT
� �
Edgelight
The Edgelight has a unique striated diffracting panel which reflects light onto the front projecting panel.
Philips Philips Pack Price Code Product Description Size Each EDGELIGHTM EDGELITE MAINTAINED BASE C/- 1X10W T8 FLUORESCENT LAMP 1 229.95$
EDGELIGHTNM EDGELITE NON MAINTAINED BASE C/- 1X10W T8 FLUORESCENT LAMP 1 229.95$
C/W LEAD ACID BATTERY AND 6V LOW TUNGSTEN HALOGEN LAMP
PFSQ10 NON MAINTAINED SQUARE SURFACE MOUNTED FITTING 1 205.50$
SLA670 PATHFINDER SLA670 LEAD ACID BATTERY PACK 1 87.00$
Emergency Components for TL-DLamp Type Ballast Type
Invertor Battery
TLD 18WATT IC 18-36 Invert 4 Cell
EB-S WLES36 4 Cell
TLD 36WATT IC 18-36 Invert 4 Cell
EB-S WLES36 4 Cell
TLD 58WATT IC 36-58 Invert 4 Cell
EB-S WLE558 4 Cell
Emergency Lighting
All versions are fitted with 70' high temperature nickel cadmium batteries, unless indicated otherwise. Designed with compliance to AS/NZS2293, 1998 Pt1, these emergency fittings provide 90 minute duration periods.
WEATHERPROOF MAINTAINED WALL MOUNT C/W 'EXIT' DIFFUSER AND 1x10W TL-D FLUORESCENT LAMPWEATHERPROOF MAINTAINED CEILING MOUNT C/W 'EXIT' DIFFUSER AND 1x10W TL-D FLUORESCENT LAMPWEATHERPROOF NON MAINTAINED WALL MOUNT C/W 'EXIT' DIFFUSER AND 1x10W TL-D FLUORESCENT LAMPWEATHERPROOF NON MAINTAINED CEILING MOUNT C/W 'EXIT' DIFFUSER AND 1x10W TL-D FLUORESCENT LAMP
The Pathfinder 10F and 10L is recessed mounted. It uses a 6V tungsten halogen lamp. Housing made from white powder coated zincseal steel. The PFSQ10 is a non maintained surface mounted square 10W Pathfinder. 10F AND 10L
Components Req'd
Exodus Range
Philips Philips Pack Price Code Product Description Size Each XD110/TEC EXODUS 1X10W DUAL NICAD BATTERY BASE, LESS DIFFUSER 1 129.50$
XD210 EXODUS 2X10W SUSTAINED BASE, LESS DIFFUSER 1 132.50$
Exodus Diffusers with "Peel-it" directional arrow decalPhilips Philips Pack Price Code Product Description Size Each DXUW 1 36.00$
DXUCD 1 36.00$
Electronic Invertors and Battery PacksSuitable for Philips HF Ballast operation.
Philips Philips Pack Price Code Product Description Size Each 1836 INVERT INVERTOR FOR LOW LOSS 18-36W 1 123.00$
3658 INVERT INVERTOR FOR LOW LOSS 36-58W 1 123.00$
BPS60CS BPS600CS 6V 5 CELL SUB C BATTERY PACK 1 125.50$
FL RangeThis compact self contained emergency floodlight has twin moveable heads.As an option the heads can also be mounted as single units for greaterversatility. CAT 2 monitored version also available on request.
Philips Philips Pack Price Code Product Description Size Each FL210 NON MAINT.LEAD ACID, SURFACE MOUNT WITH METAL BODY 1 259.00$
AND 2 X 10W HALOGEN LAMPS INCLUDED
FL235 NON MAINT. LEAD ACID, SURFACE MOUNT WITH METAL BODY 1 621.00$
AND 2 X 35W PAR36 LAMPS INCLUDED
FLCP210 IP 55 NON MAINT. LEAD ACID, SURFACE MOUNT WITH PLASTIC BODY 1 355.00$
AND 2X10W HALOGEN LAMPS INCLUDED
FLCP210N IP55 NON MAINT. NICAD BATTERY, SURFACE PLASTIC BODY 1 553.00$
Further emergency options beyond what is listed on this page are available upon request.
Emergency Lighting
The Centura range of luminaires has C3 matt aluminium optics, and a slim end cap that combines functionality with good looks. Lamps not included.
The Philips TMS212 is a well designed quality batten in single and twin fluorescent lamp versions for general lighting applications.
This range of waterproof luminaires has been designed to make installation easier and faster than ever before. NZ's first NO CLIP waterproof luminaire. Higher output means you can use less fittings for the same amount of light.
HBS258 Apex
Philips Philips Pack Price Code Product Description Size Each
HBS25833 1 279.00$
HBS25866 1 333.50$
Apex Geartrays
Philips Philips Pack Price Code Product Description Size Each GHL400 GEARTRAY FOR 400W HPL-N/HPL COMFORT MERCURY VAPOUR, 1 139.00$
SON-H 350W SODIUM, HPI 1400W BUS METAL HALIDE LAMP
GSN250 GEARTRAY FOR 250W SON/SON-T/SON COMFORT SODIUM LAMP 1 182.00$
GSN400 GEARTRAY FOR 400W SON/SON-T/SON COMFORT SODIUM LAMP 1 224.00$
GML250 GEARTRAY FOR HPI/HPI BU/HPI-T 250W METAL HALIDE LAMP 1 159.55$
GML400 GEARTRAY FOR HPI/HPI BU/HPI-T 400W METAL HALIDE LAMP 1 154.00$
Apex is a recessed HID lamp housing made from white powder coated electro-galvanised steel. The acrylic lens minimises glare and produces good lighting for horizontal working surfaces. External mounting of gear recommended.
Industrial LightingHID Luminaires
APEX BODY ONLY, 600MM X 600MM, REQUIRES CONTROL GEAR AND LAMP UP TO 400W
APEX BODY ONLY, 300MM X 300MM, REQUIRES CONTROL GEAR AND LAMP UP TO 125W
H/S/M/HB Highbay An Industrial Luminaire designed to light large indoor areas with high ceilings at heights of more than six metres.
Type A (mm) B (mm)
ZDK010 405 430
Applications
Philips Philips Pack Price Code Product Description Size Each
HHB400 2 200.00$
MHB250 1 150.00$
MHB400 1 137.00$
SHB250 1 192.00$
SHB400 1 205.00$
BHB400 1 122.00$
ZDK010 WIDE BEAM REFLECTOR TO FIT ALL HIGHBAY UNITS 1 82.00$
ZDK012 GLASS COVER WITH CLAMP BAND FOR ZDK010 REFLECTOR 1 149.80$
ZDK013 GLASS COVER FOR KOMBI PACK REFLECTOR (HHB400) 1 152.00$
ZDK002 CLEAR PRISMATIC REFLEXOR TO FIT ALL HIGHBAY UNITS, REQUIRES COLLAR 1 218.00$
ZDK022 COLLAR TO MOUNT ZDK002 TO MHB AND SHB 400 CONTROL UNITS 1 66.20$
ZDK024 COLLAR TO MOUNT ZDK002 TO MHB, SHB AND BHB 250 CONTROL UNITS 1 74.70$
ZDK030 CONICAL LENS TO FIT ZDK002, REQUIRES CLAMP BAND TO BE ORDERED 1 77.80$
SEPARATELY. REQUIRES CLAMP BAND TO BE ORDERED SEPARATELY
ZDK032 CLAMP BAND FOR ZDK030 1 89.00$
Comes complete with 2.3m Flex & Plug. Suitable to 45deg ambient.
DIMENSIONS
· In industrial installations where large windows admit daylight freely, the cool, light colour of high pressure mercury lamp is suitable. These lamps have a high light output and cater well for medium to heavy industry.
KOMBI PACK, INCLUDES BHB400 UNIT, REFLECTOR AND 400W HPL-N MERCURY VAPOUR LAMP
UNIT FOR 400W HPI-BU METAL HALIDE LAMP, LAMP AND REFLECTOR TO BE ORDERED SEPARATELYUNIT FOR 250W SON HIGH PRESSURE SODIUM LAMP, LAMP AND REFLECTOR TO BE ORDERED SEPARATELYUNIT FOR 400W SON HIGH PRESSURE SODIUM LAMP, LAMP AND REFLECTOR TO BE ORDERED SEPARATELYUNIT FOR 400W HPL-N MERCURY VAPOUR LAMP, LAMP AND REFLECTOR TO BE ORDERED SEPARATELY
UNIT FOR 250W HPI METAL HALIDE LAMP, LAMP AND REFLECTOR TO BE ORDERED SEPARATELY
Industrial LightingHID Luminaires
· High pressure sodium lights are ideally suited to heavy industrial sites where high light output is necessary but colour rendering is not critical.
· In light to medium industrial situations where light is necessary for accurate colour rendering, metal halide lamps are the bestchoice.
REFLEXOR WIDE BEAM
HDK580 Highbay (Kombi options include gear, reflector and lamp)
Features• HDK580 Highbay consists of 2 main parts: electrical gear unit and reflector
• Gear unit is pre-wired with Philips high-quality control gear with 230v/50hz ballast
• Reflector is designed to ensure good light distribution for most industrial applications
• Comes complete with 1.6 metre pre-wired 3pin flex and plug
Materials and Finish• Housing: Steel Sheet 1mm with powder coated silver finish on metal work
• Reflector: High Purity Spun anodized 1.2mm Aluminium reflector with silver matt finish
Main Applications• General Indoor Industrial Areas • Retail Stores
• Warehouse & Storage Areas • Educational Facilities
• Commercial Areas • Community Halls
Classification• IP 20 Gear • Complies to IEC6598
• Class 1
Installation and Mounting• Electrical connection using 3 pin flex and plug pre-wired into the high-bay
• Suspend or mount by the hook attached to the top of the control gear
Accessories• ZDK580 Reflector
• ZPK580 GC Glass attachment for Reflector
Philips Philips Lamp Pack Price Code Product Description Type Size Each
A highbay luminaire for high-pressure mercury, metal halide and high-pressure sodium lamps. The HDK580 offers good light distribution making it suitable for general lighting requirements in industrial and commercial areas. The HDK580 Highbay is compact and stylish and blends easily with the interior design for numerous applications.
Dimensions in mm
HCS291 Lowbay Range (Kombi options include Lowbay body, gear tray and lamp)
The HCS291 Lowbay is an industrial luminaire for mounting heights as low as 4 metres from the floor. The Lowbay
utilises high intensity discharge lamps that give widespread batwing light distribution. The HCS291 lowbay is a low
unobtrusive fitting which blends into most applications.
Main Features
· Can accommodate a range of 250w and 400w lamps in either Metal Halide or Sodium
· Can be either suspended or surface mounted
· Suitable for both low and high ceiling installations
· Optional tempered protection lens (glass) or wire guards available (cannot be fitted together)
· Fused terminal block
· Powder coated white steel fabrication
· High quality aluminium reflector
· Quality Philips integrated control gear
Applications
· Warehouses · Storage areas · Gymnasiums
· Factories · Schools
· Carparks (indoor) · Retail and Public areas
Philips Philips Lamp Pack Price Code Product Description Type Size Each HCS 291 Lowbay HCS291 LOWBAY BODY ONLY NO LAMP 1 $133.00
HCS 291250 M/H HCS291 250W METAL HALIDE KOMBI HPI-T PLUS 1 $245.00
HCS 291400 M/H HCS291 400W METAL HALIDE KOMBI HPI-T PLUS 1 $255.00
HCS 291250 Son HCS291 250W SODIUM KOMBI SON-T PLUS 1 $255.00
HCS 291400 Son HCS291 400W SODIUM KOMBI SON-T PLUS 1 $265.00
Philips Philips IP Pack Price Code Product Description Rating Size Each PL3700 WHITE GEM FOR 2 X 9W PL-S IP55 1 87.50$
PL3900 WHITE GEM-TOP FOR 2 X 9W PL-S IP55 1 97.20$
Prego Ovale, Prego Tonda
Philips Philips IP Pack Price Code Product Description Rating Size Each PL4500 WHITE, CLEAR GLASS PREGO OVALE FOR 60W GLS ES OR GENIE 11W IP44 1 15.25$
PL4520 BLACK, CLEAR GLASS PREGO OVALE FOR 60W GLS ES OR GENIE 11W IP44 1 15.25$
PL4700 WHITE, CLEAR GLASS PREGO TONDA FOR 75W GLS ES OR GENIE 11W IP44 1 23.55$
PL4720 BLACK, CLEAR GLASS PREGO TONDA FOR 75W GLS ES OR GENIE 11W IP44 1 23.55$
Prego Ovale
Italia RangeExterior Bulkheads
Modern slimline bulk head designed for a sleek unobtrusive look. Lamps not included. Slim dimensions 270 x 150 x 63mm.
Ceiling Luminaire, surface mounted, for TLE 32w circular fluorescent lamp. Equipped with integrated electrical connector kit and an acrylic diffuser to generate a diffuse light effect. Frosted acrylic diffuser cover with anti-static electronic finish.
A range of interior and exterior bulkhead luminaires combining aesthetics and practicality. Choose from compact fluorescent for high efficiency and long life incandescent sources for perfect colour rendition. Italia bulkheads may be ceiling or wall mounted.
Oval thermoplastic and glass with wedge shaped diffuser, Gem Top features a polycarbonate eyelid to direct light. Lamps not included.Gem Dimensions 296x206x115mm. Gem Top Dimensions 270x150x128mm.
New Zealand's most popular bulkhead shape. Black and white, oval (Ovale) or round (Tonda). Lamps not included. Prego Ovale Dimensions 205x100x100. Prego Tonda Dimensions 200x100.
SGS Security BulkheadIP54 rated medium security luminaire that can be wall or ceiling mounted.
Aluminium housing with polycarbonate refractor bowl.
Designed for maximum spacing needs. Lamp included.
Philips Philips IP Pack Price Code Product Description Rating Size Each SGS113070IK SECURITY BULKHEAD C/W 1 X 70W SON-I LAMP IP54 1 299.95$ SGS113070EK SECURITY BULKHEAD WITH EXTERNAL IGNITING 70W SON lamp IP54 1 399.95$
Metro Lantern
For mounting onto a 34mm OD spigot. IP55 rated with integral control gear.
Philips Philips IP Pack Price Code Product Description Rating Size Each METRO50 METRO HPL-N LANTERN C/W HPL-N 50W LAMP IP55 1 109.35$
METRO70 METRO SON LANTERN C/W SON 70W LAMP IP55 1 159.00$
Philips Philips IP Pack Price Code Product Description Rating Size Each HGC353K AURORA BULKHEAD WITH HPL-N 80W HIGH PRESSURE MERCURY LAMP IP54 1 218.65$
SGC357K AURORA BULKHEAD WITH SON 70W HIGH PRESSURE SODIUM LAMP IP54 1 248.65$ SGC359K AURORA BULKHEAD WITH SON 100W HIGH PRESSURE SODIUM LAMP IP54 1 248.65$
FWC Pacific PL-L Compact Compact fluorescent bulkheads for amenity and security lighting. Comes complete with PL-C18W lamps. IP54.
FWC120 FWC196
Philips Philips IP Pack Price Code Product Description Rating Size Each FWC196PRIS PACIFIC COMPACT PRISMATIC POLYCARBONATE C/W 2 X PL-L 18W IP65 1 157.75$
The Philips 70w HPS wall-mounted weatherproof Aurora Bulkhead boasts molded plastic housing (390x240x135mm extents), white painted steel rear reflector, and vertically reeded wrap around lens. Lamp is mounted vertically base down. Luminous opening 230x65x205mm (LxWxH). Ceiling or wall mountable.
Exterior Security
The Philips Metro Lantern can be used for many applications as its body is designed to accept a variety of lamps. Quick and easy lamp replacement is carried out by simple removal of the twist-lock bowl.
Tango Floodlight
Philips IP Pack Price Code Product Description Rating Size Each MMF383400A MMF383 HPI-T400W TANGO AK 240V 50HZ IP65 1 478.00$ MMF383400S MMF383 HPI-T400W TANGO SK 240V 50HZ IP65 1 478.00$ MMF383250S MMF383 HPI-T250W TANGO SK 240V 50HZ IP65 1 449.25$ SMF383400A SMF383 SON-T400W TANGO AK 240V 50HZ IP65 1 464.86$ SMF383400S SMF383 SON-T400W TANGO SK 240V 50HZ IP65 1 464.86$ SMF383250S SMF383 SON-T250W TANGO SK 240V 50HZ IP65 1 455.45$ SMF28370S SMF283 SON-T70W TANGO SK 240V 50HZ IP65 1 371.66$ MMF28370S MMF283 MHN-TD70W TANGO SK 240V 50HZ IP65 1 292.75$ MMF283150S MMF283 MHN-TD150W TANGO SK 240V 50HZ IP65 1 366.68$ ZZW283 ZZW283 TANGO FRONT GLASS ASSEMBLY KIT 1 31.60$ ZZW383 ZZW383 TANGO FRONT GLASS ASSEMBLY KIT 1 40.00$
A: Asymmetric S:Symmetric
General Area LightingFloodlighting
A series with the power to produce better light while using fewer luminaires. Tango's IP65 housing is made of low copper and highgrade aluminium which is able to withstand corrosion. The front glass is toughened for safety Symmetric and asymmetric options.Packaged complete with Philips High output Plus lamp for optimum light output Hinged front glass with stainless steel release clips for quick and easy maintenance. Hot dipped galvanized steel stirrup mounting bracket. IP65 rated.
HNF/QNF
Materials
Philips Philips IP Pack Price Code Product Description Rating Size Each
The Philips HNF460/HNF461 is a versatile symmetrical distribution floodlighting system. It is available with a wide beam spread - HNF460, and narrow beam spread - HNF461. Suitable for HPI-T 250w, 400w or 1000w metal halide discharge lamps, and SON-T 250w, 400w and 1000w high pressure sodium lamps. Control gear and enclosures to be ordered separately. To order complete unit requires floodlight,control gear tray, outdoor enclosure, and lamp only. (HPI-T and SON-T lamp versions)
MVP506 OptiFlood
Dimensions
80mm 373mm 176mm
600mm 460mm
Materials and FinishHousing and opening Clips: Made from high-pressure die cast aluminium with low copper content to ensure corrosion resistance.
Mounting Bracket: Made from galvanised steel with mounting fixtures and angled to allow more aesthetic integration into columns.
Finishing: The Optiflood range is supplied in raw aluminium stage. Dark grey paint upon request.
Front Glass: 4mm thick toughened glass plate secured in the frame by means of 4 fixings, to allow easy replacement if damaged.
Optics: High quality purity anodised aluminium with a high reflective factor.
Gear Tray: Removable steel plate, housing the ballast, ignitor and capacitors. Supplied with self stopping timed ignitors.
Lamp: Includes lamp
Applications· Parks and Pedestrian areas · Car Parks · Industrial Areas
· Small recreational sports facilities · Roundabouts · General Area Lighting
ClassificationsClassification: IP65 Complies with IEC60598 A: Asymmetrical Reflector
Insulation class: I K: Kombi includes lamp GR: Grey Painted Housing colour
ST: Standard Aluminium Housing colour
Philips Philips Pack Price Code Product Description Size Each
MVP506 SON-T PLUS 250W K A ST 1 730.00$
MVP506 HPI-TP 250W K A ST 1 705.00$
MVP506 HPI-TP 400W K A ST 1 775.00$
MVP506 SON-T PLUS 250W K A ST GR 1 730.00$
MVP506 HPI-TP 250W K A ST GR 1 705.00$
MVP506 HPI-TP 400W K A ST GR 1 775.00$
MVP506HPIT250
MVP506HPIT400
MVP506SON250GR
MVP506HPIT250GR
MVP506HPIT400GR
MVP506SON250
The Philips OptiFlood MVP506 has replaced the M/SNF210 Floodlight continuing Philips long tradition of asymmetric floodlightingexcellence. As with all Philips Lighting asymmetric floodlights, Optiflood provides a very high efficiency, asymmetric light beamwhere all the light is projected below the horizontal giving excellent light glare control and control of wasted upward light. The OptiFlood is suitable for both high-pressure sodium lamps for maximum economy and metal halide lamps for good colour rendering.
MHN-S/LA2000I MHN-LA 2000W IGNITOR ONLY (INCLUDED IN GEAR TRAY) IP55 1 217.80$
To order complete unit requires floodlight, control gear tray, igniter and lamp.
Professional and Sports LightingFloodlighting
REPLACEMENT GLASS FOR MVP507 MEDIUM BEAM OPTIVISION FLOODLIGHT
FOR MHN-LA 2000W LAMP AND CONTROL GEAR. LAMP INCLUDED. CONTROL GEAR ORDERED SEPARATELY.
High end superior asymmetrical floodlight with range of beam spreads, wattages and lamp types within same housing. Identical Imax=60' for all versions with exceptional backlight cut-off. Compact design provides extremely low windage and drag for lower pole cost.
The Philips PowerVision floodlight features a high performance interchangeable, high gloss aluminium reflector, available in narrow (NB), medium (MB), and wide (WB) beam versions. The housing is made of die-cast aluminium. The front closure consists of a die-cast aluminium frame and impact resistant toughened glass. Lamp and control gear ordered separately.
ArenaVision
MVF403 ArenaVision Unique 7 ovoid beam options for highest quality sports lighting applications for MHN-SA 2000w lamps.
Philips Philips IP Pack Price Code Product Description Rating Size Each MVF403CATA1 ARENAVISION FLOODLIGHT, CATEGORY A1 REFLECTOR, IP65 1 1,260.00$
MHN-LA1000I MHN-LA 1000W IGNITOR ONLY IP65 1 93.20$
To order complete unit requires floodlight, control gear tray, ignitor and lamp.
FloodlightingProfessional and Sports Lighting
The Philips ArenaVision has unique patented oval optics and along with MHN-SA 2000w lamps guarantees the highest system efficiency possible and low glare. A built in skirt reflector minimises spill light and glare even further. Rear opening access for easy lamp replacement. Non-corrosive, high pressure, die cast aluminium housing. Control Gear & lamp to be ordered separately.
A professional range designed for architectural features. The Decoflood is a fully integrated floodlight family matching in appearance and entirely capable of meeting practically every demand for architectural, sculptural and area floodlighting. The fourdifferent floodlights 606/607/616/617 all feature die cast aluminium housing in grey colour with newly developed anodised aluminium reflectors allowing a choice of beam options through the range. The symmetrical reflectors produce a rectangular beam for uniform illumination of facades and other vertical surfaces using widely spaced floodlights in economic installations.Wide, medium and narrow beam options allow considerable flexibility in positioning, minimal visual obtrusion, and economical maintenance. The rotationally symmetrical reflectors produce round beams for accent lighting and modeling of tall narrow subjects such as statues, or natural 3-dimensional features like trees and cliffs. Complete with control gear. Lamp not included.
MVF607
606 607/17 616
MVF607Philips Philips IP Pack Price Code Product Description Rating Size Each MVF607NB METAL HALIDE FLOODLIGHT, ROUND PROJECTOR, IP65 1 886.00$
NARROW SYMMETRICAL BEAM REQUIRES HPI-T 400W LAMP
MVF607MB METAL HALIDE FLOODLIGHT, ROUND PROJECTOR, IP65 1 886.00$
MEDIUM SYMMETRICAL BEAM REQUIRES HPI-T 400W LAMP
MVF607WB METAL HALIDE FLOODLIGHT, ROUND PROJECTOR, IP65 1 886.00$
WIDE SYMMETRICAL BEAM REQUIRES HPI-T 400W LAMP
Accessories for DecofloodA WIDE RANGE OF ACCESSORIES ARE AVAILABLE UPON REQUEST: BARN DOORS, GLARE SHIELDS, LOUVRES, CANNONS,
Philips Philips IP Pack Price Code Product Description Rating Size Each DWP604CDM-R35W MINIATURE METAL HALIDE FLOODLIGHT, INTEGRAL CONTROL GEAR, IP65 1 439.00$
REQUIRES SPOT OR FLOOD BEAM CDM-R PAR20 35W LAMP
Accessories for MiniDecofloodA WIDE RANGE OF ACCESSORIES ARE AVAILABLE UPON REQUEST: GLARE SHIELDS, EXTENSION ARMS,
CORNER BRACKETS AND COLOUR FILTERS.
To order complete unit requires floodlight and lamp, control gear is integral.
Area LightingCity Beautification Lighting
High Frequency BallastsHigh Frequency Electronic ballasts are a high performance option for Lighting Control.
They can offer a number of performance enhancements over conventional gear including:
• Reduced energy consumption
• Longer lamp life
• Improved protection against mains voltage variations
• Dimming to 3% (specified models) for greater flexibility and energy savings
• Flicker free lamp operation
• Lightweight integrated device
Philips Lighting offers 2 families of HF Ballasts, the HF performer (program) and
HF Regulator (dimming), to suit varying application needs.
Performer Ballasts are offered across a wide range of lamp types, including TL-D, Philips
advanced TL' 5 system and compact fluorescent. They are ideal for applications where switching
is frequent and dimming is not required.
Regulator Ballasts build on the performer range and have smooth dimming capabilities.
PERFORMER Range (program) - LINEAR FLUORESCENTPhilips Philips Dimensions Case Minimum PriceCode Product Description LxWxH Size Order EachHFP118 ELECTRONIC BALLAST FOR 1 X 18W TL-D LAMP 335X39X28 A 1 63.00$
HFP218 ELECTRONIC BALLAST FOR 2 X 18W TL-D LAMPS 425X39X28 B 1 71.00$
HFP318 ELECTRONIC BALLAST FOR 3 X 18W TL-D LAMPS 425X39X28 B 1 95.00$
HFP418 ELECTRONIC BALLAST FOR 4 X 18W TL-D LAMPS 425X39X28 B 1 95.00$
HFP136 ELECTRONIC BALLAST FOR 1 X 36W TL-D LAMP 335X39X28 A 1 63.00$
HFP236 ELECTRONIC BALLAST FOR 2 X 36W TL-D LAMPS 425X39X28 B 1 71.00$
HFP158 ELECTRONIC BALLAST FOR 1 X 58W TL-D LAMP 335X39X28 A 1 63.00$
HFP258 ELECTRONIC BALLAST FOR 2 X 58W TL-D LAMPS 425X39X28 B 1 71.00$
PERFORMER Range (program) - COMPACT FLUORESCENT (PL-L, PL-C/PL-T)Philips Philips Dimensions Case Minimum PriceCode Product Description LxWxH Size Order EachHFP118PLT/C ELECTRONIC BALLAST FOR 1 X 18W PL-C/PL-T LAMP 103X67X30 C 1 90.00$
HFP218PLT/C ELECTRONIC BALLAST FOR 2 X 18W PL-C/PL-T LAMPS 123X79X33 D 1 100.00$
HFP126-42PLT/C ELECTRONIC BALLAST FOR 1 X 26W-42W PL-C/PL-T LAMPS 103X67X30 C 1 75.00$
HFP132PLT/C ELECTRONIC BALLAST FOR 1 X 32W PL-T LAMP 103X67X30 C 1 75.00$
HF-P2 26-42 ELECTRONIC BALLAST FOR 2 X 26W-42W PL-C/PL-T LAMPS 1 95.00$
HFP155PLL ELECTRONIC BALLAST FOR 1 X 55W PL-L LAMP 335X39X28 A 1 121.00$
HFP255PLL ELECTRONIC BALLAST FOR 2 X 55W PL-L LAMPS 425X39X28 B 1 145.00$
PERFORMER Range (program) - TL' 5 16mm FLUORESCENTPhilips Philips Dimensions Case Minimum PriceCode Product Description LxWxH Size Order EachHFP114TL5 ELECTRONIC BALLAST FOR 1 X 14W TL'5 LAMP 359X30X28 F 1 65.00$
HFP214TL5 ELECTRONIC BALLAST FOR 2 X 14W TL'5 LAMPS 360X30X29 G 1 72.00$
HFP314TL5 ELECTRONIC BALLAST FOR 3 X 14W TL'5 LAMPS 425X39X28 B 1 90.00$
HFP414TL5 ELECTRONIC BALLAST FOR 4 X 14W TL'5 LAMPS 425X39X28 B 1 90.00$
HFP128TL5 ELECTRONIC BALLAST FOR 1 X 28W TL'5 LAMP 359X30X28 F 1 65.00$
HFP228TL5 ELECTRONIC BALLAST FOR 2 X 28W TL'5 LAMPS 425X30X28 B 1 72.00$
HFP135TL5 ELECTRONIC BALLAST FOR 1 X 35W TL'5 LAMP 359X30X28 F 1 65.00$
HFP235TL5 ELECTRONIC BALLAST FOR 2 X 35W TL'5 LAMPS 425X30X28 B 1 72.00$
HFP154TL5 ELECTRONIC BALLAST FOR 1 X 54W TL'5 LAMP 359X30X28 F 1 65.00$
HFP254TL5 ELECTRONIC BALLAST FOR 2 X 54W TL'5 LAMPS 425X30X28 B 1 72.00$
HFP180TL5 ELECTRONIC BALLAST FOR 1 X 80W TL'5 LAMP 359X30X28 F 1 72.00$
HF-P149TL5HO ELECTRONIC BALLAST FOR 1 X 49W TL'5 HO LAMP 1 65.00$
NOTE: Please refer to the following page for dimension drawings.
Lamp Control Gear Fluorescent Ballasts
Dimming HF BallastsTL-D LINEAR FLUORESCENT (program)
Philips Philips Dimensions Case Minimum PriceCode Product Description LxWxH Size Order EachHFR218 DIMMING ELECTRONIC BALLAST FOR 2 X 18 TL-D LAMPS 425X39X28 B 1 145.00$
HFR136 DIMMING ELECTRONIC BALLAST FOR 1 X 36 TL-D LAMP 335X39X28 A 1 128.00$
HFR236 DIMMING ELECTRONIC BALLAST FOR 2 X 36 TL-D LAMPS 425X39X28 B 1 145.00$
HFR158 DIMMING ELECTRONIC BALLAST FOR 1 X 58 TL-D LAMP 335X39X28 A 1 128.00$
HFR258 DIMMING ELECTRONIC BALLAST FOR 2 X 58 TL-D LAMPS 425X39X28 B 1 145.00$
COMPACT FLUORESCENT - PL-L. PL-C/PL-T (program)Philips Philips Dimensions Case Minimum PriceCode Product Description LxWxH Size Order EachHFR118PLT/C DIMMING ELECTRONIC BALLAST FOR 1 X 18 PL-C/PL-T LAMP 123X79X33 D 1 147.00$
HFR218PLT/C DIMMING ELECTRONIC BALLAST FOR 2 X 18 PL-C/PL-T LAMPS 158X102X38 E 1 147.00$
HFR126PLT/C DIMMING ELECTRONIC BALLAST FOR 1 X 26 PL-C/PL-T LAMP 123X79X33 D 1 147.00$
HFR226PLT/C DIMMING ELECTRONIC BALLAST FOR 2 X 26 PL-C/PL-T LAMPS 158X102X38 E 1 147.00$
HFR242PLT DIMMING ELECTRONIC BALLAST FOR 2 X 42 PL-T LAMPS 158X102X38 E 1 147.00$
Note: 'TL'5 16mm Fluorescent (Warm Start) ballasts available on indent basis.
lamps. Halogen dichroic lamps and compact HID lamps are becoming increasingly popular in commercialsituations and they are often used to highlight retail displays. Less UV allows brighter accents and illuminationwithout fading or damage, because UV Block reduces UV output by at least 70%. PET (Permissible Exposure
Time) values have increased to allow longer exposure to lamps which have UV block properties.
White SONLow Voltage Halogen CapsulesGlass Faced Halogen Dichroics
(PET = 100 hours at 1000 lux).
Philips has the most comprehensive range of UV block products on the market, including halogen and discharge
LampsHalogen
UV BlockThis Symbol signifies lamps which have UV Block properties.
The product families below all feature UV block as standard.CDM Mastercolour
PAR Halogena
Quartz Metal Halide (MHN/MHW)
A
B
Brilliantline PRO Dichroic Halogen ( MR 16)A quality low voltage halogen reflector lamp consisting of a high pressure xenon gas filled
burner, optically positioned in a dichroic glass reflector. The dichroic reflector is designed
to transmit heat through the back of the lamp and reflect light to the front,
resulting in a "cool" beam. BRILLIANTLINE Pro lamps feature a high intensity beam
with a clearly defined beam spread and have excellent lumen maintenance over their life.
They come complete with front glass and the universal burning position makes
BRILLIANTLINE Pro suited to use for accent, task and decorative lighting in retail,
hospitality and domestic applications. Average life 4000 hours.
It is an excellent light source for general lighting, especially creative accent lighting in shops, restaurants, hotels, galleries, exhibitions and museums.
LampsHalogen
Low voltage halogen reflector lamp with double-ended burner and high -purity aluminium reflector. It has a unique infra-red coated burner technology, and revolutionary compact precision burner for maximum performance of the infra-red reflecting coating. The ceramicfilament shield reduces glare and improves beam shape. It has a flat profile, very tight beam pattern, and excellent glare control.
The Masterline 111 saves up to 40% lower energy costs compared to the Pro or equivalent versions of this lamp thanks to improved burner efficacy (Im/W). It also lowers cooling costs because of up to 40% lower heat transmission. Increased lifetime (4000hours) ensures low maintenance costs, and has lowest UV output compared to other versions of this lamp reducing fading risks to an absolute minimum.
A
B
A
B
Low Voltage Halogen CapsulesLow pressure UV block halogen capsules. Low pressure capsules can be used in luminaires without front
glass according to IEC598, IEC357. UV block design strongly reduces harmful UV output. Axial filaments
give a higher light output and a more uniform beam when used in conjunction with luminaires.
Average life 3000 hours.
STANDARD (CLEAR - TRANSVERSAL)
Philips Philips Colour Dimensions Carton Minimum Price Code Product Description Temp K. A-B Quantity Order Each HAL13283 12V 5W G4 HALOGEN CAPSULE CLEAR 2800 9X31 100 10 8.06$
The TLD colour lamps are produced with special fluorescent powder, which leads to a good colour rendering index. These lamps are used in human applications such as schools, offices, factories and halls.
B
A
B
A
TL-D Life Max Tubes
Philips Philips Colour Dimensions Carton Minimum Price Code Product Description Temp.K A-B Quantity Order Each TLD30W840 TL-D SUPER 80 30W FLUORESCENT LAMP COOL WHITE 4000 1214X28 25 25 9.94$
TL-D Hi-Frequency Triphosphor Fluorescent Lamps - Colour 80 SeriesSpecifically developed for use with Hi-Frequency ballasts which provide increased luminous
efficacy whilst giving the same light quality. 26mm diameter. Economic life 20000 hours.
Philips Philips Colour Dimensions Carton Minimum Price Code Product Description Temp.K A-B Quantity Order Each TLD16840 TLD16W/84HF FLUORESCENT LAMP COOL WHITE 4000 604X26 25 25 11.25$
The Xtra & Xtreme are the new range of long life fluorescent lamps which have been developed to help reduce the total cost of ownership. The Xtra tubes lasts up to 28,000 hours and the Xtreme tubes last up to 47,000 hours. These tubes are made for commercialapplications where the cost of maintenance are high due to disruption costs, high ceilings, and difficult to reach places.
Fluorescent lamp starter switches with unsurpassed quality and reliability. These starters produce sufficient high peak voltage for proper ignition of both TL-D and TL lamps. They are fitted with a radio interference suppression capacitor and comply with the performancerequirements of IEC155/155A. Philips starters are suitable for 16mm, 26mm, and 38mm diameter tubes.
• The S2 is suitable for: single circuit operation 110-130V and series operation 220-240V for lamps 4W, 6W, 8W, 14W, 15W, 18W, 20W & 22W.• The S10 is suitable for: single circuit operation 220-240V for lamps 4W, 6W, 8W, 13W, 14W, 15W, 16W, 18W, 20W, 22W, 23W, 30W, 32W, 36W, 38W, 40W, 58W, 60W & 65W.
A range of simple, yet decorative shaped circular fluorescent lamp in 26mm diameter. The main advantage of the circular design isproviding non directional light for functional and decorative luminaires. Economic life 13000 hours.
A range of miniature TL fluorescent lamps with a diameter of 16mm makes these suitable for small scale AC lighting applications such as vending machines and DC operated lanterns in Switch Start operation. Economic life 10000 hours.
PL-C lamps are compact, single ended fluorescent lamps. They have a two pin base with an integral starter switch providing almost instant starting. Their compact size and high light output offers an energy saving of about 80% compared to an equivalent wattage of a GLS lamp. They offer excellent colour rendering and are available in three colour temperatures. All require external control gear which normally comes complete with the luminaire. Thanks to the Philips new bridging technology and Optimised Coating Technologies, Philips PL-C lamps now offer a 6% higher system light output, 12% improvement in lumen maintenance and 25% increase in average rated life.
A
B
A
B
A
B
PL-S Compact Fluorescent PL-S lamps are compact, single ended fluorescent lamps. They have a two pin base with an integral starter
providing almost instant starting. Their compact size and high light output offers an energy saving of about
80% compared to an equivalent wattage of a GLS lamp. They offer excellent colour rendering and are
An economic introduction to energy saving compact fluorescent lamps. PLE-U lamps use up to 80% less energy than the equivalent incandescent lamp and last 8 times as long. Suited to a wide range of applications including living rooms, hotels, lounges, corridors and amenity areas. And now all Philips PLE-U lamps contain amalgam technology which means that in all applications bright and stable light is guaranteed whatever the ambient temperature. Average Life 10000 hours.
The ecotone lamps are energy saving solutions for high lumen applications. It uses amalgam technology for optimum light output at a wide temperature range.
PLQ Lamps are compact fluorescent lamps with a quadrant-like shape. High light quality and optimum lumen output provide increased value for money. Ideal for Applications such as stairwells, corridors, reception areas and toilets. Fits both square and round bulkhead luminaires.
Integrated Compact Fluorescent Energy Savers
A
B
B
A
GenieA new generation of compact fluorescent lamps designed to fit almost anywhere.
Genie offers up to 80% energy saving over standard incandescent and lasts up to 6 times as long.
The compact size means that lamps are neatly hidden from view in downlights.
Built-in instant starters provide immediate light.
Compatible with a wide range of voltages operating from 170 - 250V.
Average lamp life 6000 hours.
Philips Philips Dimensions Carton Minimum Price Code Product Description A-B Quantity Order Each GENIE8WWWBC 240V 8W BC GENIE COMPACT FLUORESCENT 45X107 48 12 4.50$
The Tornado is another addition to the family of compact fluorescent lamps. These energy saver lamps offer up to 80% energy saving over standard incandescent lamps and last up to 6 times longer. The compact size means that lamps are neatly hidden from view in downlights. Built-in starters provide immediate light. Compatible to operate in voltages ranging from 170-240V. Average lamp life is 6000 hours.
Ambiance is the new look energy saver lamp, which offers a perfect alternative for ordinary incandescent bulbs, especially where the light fittings are exposed or where a decorative design is preferred. These energy saver lamps offer up to 80% energy saving over standard incandescent and last 6 times longer. The Ambiance is designed with a standard bayonet or screw base and is available in 8W and 11W versions - providing a similar light output to 40W and 60W incandescent light bulbs, making an ideal lighting alternative.
Integrated Compact Fluorescent Energy Savers
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
CDM MASTERCOLOURMastercolour lamps are premium quality metal halide lamps that use ceramic discharge tube technology. This technology has enabled colour shift to be significantly reduced to just +/- 200K and the luminous efficacy to be as high as 95 lm/W.
CDM-T Mastercolour - Single EndedPhilips Philips Colour Dimensions Carton Minimum Price Code Product Description Temp.K A-B Quantity Order Each CDMT35/830 35W G 12 CERAMIC METAL HALIDE 3000 100X20 12 1 158.56$
CDMT70/830 70W G 12 CERAMIC METAL HALIDE 3000 100X20 12 1 158.56$
CDMT150/830 150W G 12 CERAMIC METAL HALIDE 3000 110X20 12 1 177.91$
CDMT70/942 70W G 12 CERAMIC METAL HALIDE 4200 100X20 12 1 158.56$
CDMT150/942 150W G 12 CERAMIC METAL HALIDE 4200 110X20 12 1 177.91$
CDM-T KitCDMTMKIT 20W G 12 CERAMIC METAL HALIDE LAMP KIT 3000 12 1 135.00$
CDM-TC Mastercolour - Single EndedPhilips Philips Colour Dimensions Carton Minimum Price Code Product Description Temp.K A-B Quantity Order Each CDMTC35/830 35W G8-5 CERAMIC METAL HALIDE 3000 85X14 12 1 158.56$
NOTE: For a complete description of HID gear trays please refer to page 50.
LampsCompact HID Lamps
A
B
A
B
B
A
A
B
MHN-TD / MHW-TD Linear Metal Halide LampsHigh pressure quartz metal halide gas discharge lamps in a compact linear tube which offer high performance together
with high colour rendering. MHN-TD and MHW-TD lamps require control gear to operate and have a recommended burning
position of ± 45 degrees from the horizontal.
Philips Philips Colour Gear Dims Carton Min Price Code Product Description Temp.K Tray A-B Qty Order Each MHWTD70 70W RX7S METAL HALIDE D/ENDED 3000 GSN70E 21X117 12 1 98.50$
ML Ovoid Blended Self Ballasted Mercury Vapour LampsMercury blended lamp, combining high luminous efficacy of mercury vapour discharge lamps with the favourable
colour properties of tungsten filament sources. ML lamps DO NOT require control gear. Recommended burning
position for the 100W and 160W is +/- 30 degrees, base up or down, and for the 250W and 500W is +/- 45 degrees
from the vertical.
Philips Philips Colour Dimensions Carton Minimum Price Code Product Description Temp.K A-B Quantity Order Each ML100BC 100W BC BLENDED LAMP - SELF BALLASTED 3300 70X149 24 12 23.49$
Low Voltage Halogen Projection LampsPhilips Philips ANSI / LIF Carton Minimum Price Code Product Description Code Quantity Order Each 6423 15V 150W GZ6.35 EFR, A1/232 10 1 30.75$
6550 15V 150W G6.35 EVB, A1/234 10 1 12.52$
6834 12V 100W GZ6.35 EFP, A1/231 10 1 29.50$
6853 12V 75W GZ6.35 EFN, A1/230 10 1 29.50$
6958 24V 250W G6.35 EVC, M/33 10 1 23.00$
7023 12V 100W GY6.35 FCR, A1/215 10 1 11.25$
7158 24V 150W G6.35 FCS, A1/216 10 1 10.50$
13096 120V 300W GY5.3 ELH 10 1 53.56$
13158 21V 150W GX5.3 EJN, ELD 10 1 33.90$
13160 21V 80W GX5.3 DDS 10 1 33.71$
13163 24V 250W GX5.3 ELC, A1/259 10 1 34.89$
13634 82V 300W GX5.3 FHS 10 1 43.82$
13711 13.8V 25W GZ4 FLT 10 1 32.76$
14501 20V 150W GX5.3 DDL 10 1 42.61$
14530 24V 300W GY6.35 FLW 10 1 27.74$
13163/5H 24V 250W GX5.3 -5H ELC/5H 10 1 45.00$
7748XHP 24V 250W G6.35 EHJ, A1/223 10 1 10.50$
7787XHP 36V 400W G6.35 EVD, A1/239 10 1 36.58$
LampsSpecial Application & Miscellaneous
B
A
Mains Voltage Halogen Projection LampsPhilips Philips ANSI / LIF Carton Minimum Price Code Product Description Code Quantity Order Each 7389 240V 500W GY9.5 A1/244 10 1 45.91$
13162R 240V 800W CL R7S DXX, P2/13 10 1 39.80$
13477R 240V 800W R7S EME, P2/11 10 1 37.31$
6358R 240V 1250W R7S P2/12 10 1 44.92$
6800C 240V 500W P28S T/24 10 1 69.79$
6820P 240V 500W GY9.5 T/25 10 1 56.75$
6823P 240V 650W GY9.5 T/27 10 1 68.37$
6874P 240V 300W GY9.5 M/38 10 1 61.47$
6877P 240V 500W GY9.5 M/40 10 1 67.84$
6894Y 240V 2500W G22 CP/91 10 1 177.89$
6897P 240V 1200W GX9.5 FWT, T29 10 1 78.59$
6986P 240V 600W G9.5 GVK 10 1 89.66$
6994P 240V 2000W GY16 FTL, CP72 10 1 118.59$
6995I/BP 240V 1000W GY9.5 GAD 10 1 89.51$
6995I/BP230V 230V 1000W GY9.5 GAB 10 1 116.75$
6996P 240V 1000W GX9.5 FWR, T/19 10 1 73.71$
6998C 240V 650W P28S FKB, T/22 10 1 91.52$
VL300 240V 300W GX6.35 10 1 35.38$
HID Projection LampsHigh efficiency cold-strike / hot-strike metal halide lamps designed for optimum light collection.
They combine the high luminous efficacy, compact arc and excellent colour characteristics
required for a variety of spotlighting and projector applications.
Philips Philips Colour Carton Minimum Price Code Product Description Temp. K. Quantity Order Each MSR1200 1200W G22 COLD-STRIKE 5900 4 1 542.32$
MSR575HR 575W G22 HOT-RESTRIKE 6000 4 1 771.12$
MSR5752 575W G22 COLD-RESTRIKE 7200 4 1 515.55$
LampsSpecial Application & Miscellaneous
Lamp Performance and Control Gear SchedulesThe following pages provide an easy to use guide for lamps used in the vast majority of lighting applications. More details
of other lamps, including lamps for specialised applications, can be found in this catalogue by referring to the index.
Circuit Efficacy and Lighting Design LumensThe key factor in the energy and cost-effectiveness of lighting is the choice of lamp. The suitability of the lamp as a light
source for a given application is primarily determined by its colour characteristics: colour temperature (colour appearance)
and colour rendering ability.
Good colour rendering and high efficacy are no longer necessarily incompatible. The most efficient fluorescent lamps, for
example are Colour 840 (intermediate colour appearance) and Colour 830 (warm colour appearance). These lamps also
have deluxe colour rendering.
The tables on the following pages, whilst not containing every lamp type and rating, gives a quick guide to the relative
efficacy of various lamp types.
NOTE: All illustrations, information and specifications presented and referred to herein
are believed to be correct at the time of publication; however accuracy cannot be
absolutely guaranteed.
Average Rated Life
Average rated life is defined as the length of time during which 50% of the lamps reach the end of their individual life.
(IEC 60969:1988)
LampsLamp Information Guide
Lamp Supply Lamp Lamp Colour Colour Luminous Max.Luminous Beam Burning Life Time
Type Voltage Wattage Base Temp K Rendering Flux Intensity Spread Position Average
V W K Ra lm cd degrees Hours
GENERAL LIGHTING SERVICE - GLS LAMPSSTANDARD GLS 240V 25W E27/B22 2700K 100 220 lm _ _ UNIV 1000HRS
HOW THE TWO IP CLASSIFICATION NUMERALS ARE SELECTED
Degrees of Protection indicated by the first characteristic numeral
IP Classification GuideINGRESS PROTECTION CHART
FirstCharacteristic
Numeral
0
1
2
3
4
5
6
ShortDescription
Degree of Protection:Details of objects which will be'excluded' from the enclosure
Non-protected
Protected against solid objects greater than 50mm
Protected against solid objects no greater than 12mm
Protected against solid objects no greater than 2.5mm
Protected against solid objects no greater than 1.0 mm
Dust-protected
Dust tight
No special protection
A large surface of the body, such as a hand ( but no protection against deliberate access). Solid objects exceeding 50mm in diameterFingers or similar objects not exceeding 80mm in length. Solid objects exceeding 2.5mm diameter
Tools, wires etc of diameter or thickness greater than 2.5 mm. Solid objects exceeding 2.5mm diameter.
Wires or strips of thickness greater than 1.0mm.Solid objects exceeding 1.0 mm diameter
Ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment
No ingress of dust
IP Classificationof EnclosuresLuminaires are classifiedaccording to the protectionagainst dust and moistureprovided by their enclosures.The 'Degree of Protection' isindicated by the letters IPfollowed by two numerals,the first referring to dust andthe second to moisture.(Note: the two numeralsshould be pronounced separately.)The full classification forequipment in general islisted in the table.The IP system supersedesthe earlier classification ofequipment as 'rainproofwith symbols.The only IP classificationsrelevant to luminaires are:IP20 IP23 IP24 1P25IP53 IP54 1P55IP63 IP64 1P651P66 IP67 IP68
0
1
2
3
4
5
6
ShortDescription
Degree of Protection:Details of moisture which will be
'excluded' from the enclosure
Non-protected
Protected against dripping water
Protected against dripping water when tilted up to 15˚
Protect against spraying water
Protected against splashing water
Protected against low-pressure water jets
Protected against heavy seas
No special protection
Dripping water ( vertically falling drops) shall have no harmful effect.
Vertically dripping water shall have no harmful effect when the enclosure is tilted at any angle up to 15˚ from its normal position.Water falling as a spray at an angle up to 60˚ from the vertical shall have no harmful effect.
Water splashed against the enclosure from any direction shall have no harmful effect.
Water projected by a standard nozzle against the enclosure from any direction shall have no harmful effect.Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities.
Degrees of Protection indicated by the second characteristic numeral.
7Protected against the effects of immersion
Ingress of water in a harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time.
8Protected against submersion The equipment is suitable for continuous submersion in
water under conditions which shall be specified by the manufacturer.
SecondCharacteristic
Numeral
TBS369 4XTL5 4X18W EBS D6
EXAMPLE: TBS369
Key words relating to Luminaires
B Fluorescent bended
C Combination of lamp types 1xTLD fluorescent lamp 36 Watt
D Reflector incandescent
F Fluorescent PL
G Attachments/OpticsH High pressure mercuryK Fluorescent QLL Fluorescent SL
M Metal Halide
N Incandescent HFP Projection lamps HF-BQ Halogen HF-PR Power track systems HF-RS High pressure sodium IT Fluorescent linear CV Fibre optic systems ICX Low pressure sodium DIZ Special & accessories DI
EBS
B Recessed mounted
C Surface/ceiling mounted C6G Special D6M Batten/Electrical M6P Pendant M2R Powertrack mounting M1S Semi-recessed mountedT TrunkingW WallZ Accessories
D Orientable downlightG DecorativeH SpecialK High & Low BayN SpotlightR AsymmetricS Standard/Stand AloneV Fibre opticW WaterproofX SystemZ Increased safety
90
Explanation of Philips Type Numbers
1st Letter EXAMPLE: 4XTL5 4X18WIndicates the lamp type or non-luminaire product type
2nd LetterIndicates the mounting or version EXAMPLE: D6
Key Words relating to Optics or LouversHigh gloss 3D Lamella
Semi-gloss 3D lamella
Matt 3D lamella
Profiled Lamella with undulating wave
White painted lamella
Indicates the type of usage3rd Letter
Resistance = t
Not Resistant = -
Polystyrene (PS)Syntheticrubber
t t
t t
o _
_ _
o
t t
t t
Carbon tetrachloride _ _
Chloroform _ _
Chromic acid 20% t _
Cyclohexane o _
Dibutyl phthlate t t
Dichlorobezene _ _
Ethyl acetate _ t
Ethyl alcohol 40% o/x t
Ethylene glycol o/x t
Formaldehyde 30% t t
Formic acid t t
o _/o
t t
t t
t t
o/x _
t t
o/x t
Methylene chloride _
Methyl ethyl ketone _ t
_ _
o t
t t
Perchloroethylene _ _
Potassium hydroxide t t
_ _
x t
o _
t t
t t
t o
t o/_
_ _
t _
_
_ _
Refer to your Philips Lighting Catalogue for material composition of selected luminaires.
91
Naphtha
Chemical Resistance ofPhilips Luminaire Components
This table offers an indication of the chemical resistance of the main synthetic materials applied in luminaires. The indications in the table are valid at a temperature of 25C. Where appropriate concentrations are mentioned, combination of chemical substances might cause more severe
effects.
Limited resistance = O
Can cause environmental stress cracking = X
Chemicals
Chemical substance Polycarbonate (PC) Polymethyl methacrylate (PMMA)
Acetc acid 25% t t/o
Ammonium salts _/x t
Aqua regina o _
Benzene _ _
Butane t t
Butanol t _
Carbon dioxide t t
_/x _
_ _
t t/o
t/o _
_ _
_ _
t/o _
t o
t t
t/_ t
_/t t/o
Freon
Hydrochloride acid 10- t t
Hydrogen peroxide t t
Isopropyl alcohol t o
Kerosene _ t
Lactic acid 10% t t
Methyl alcohol x o
_ _
_ _
t
Nitric acid 20-30% t/o t
Ozone 0.5ppm t t
_ _
_ t
Propane t t
PVC plasticised x _
Saponified oil t
Soda saturated solution t t
Sodium hydroxide _/o t
Stearic acid t t
Sulphuric acid 10% t t
Toluene _ _
Xylene _ _
Transformer oil t t
Trichloro-ethylene _ _
A Disk 35
Accentline 60 Double Ended Linear Halogen 63Actinic Fluorescent 78 Downlights 19Actinic Sunbed Cleo 79 DWP604 44Adante Uplighter 26 E