PHILIPS PowerBalance … · Condition Philips to specify to the customers (instruction): > to use UTP (Unshielded Twisted Pair) CAT5E or CAT6 cable > the maximum length of the cable
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Points cable if ceilingis not strong enough.(4x not included)
5/6
Min.7mm
PSD-T+ACL
DALI 1
DALI 2
N/Ns- -L-Ls
PSD PSD-T
3
12
N
DALI 1
LN
12
N
LsLN/Ns
PSD-EL
Wieland (W)PSU
PSD-T PSD-EL PSU-EL
PSD PSD+ACL
N
N
L
L
PSU
12
N
LLLN/NN
PSU-EL
12
N
LLLN/NN
PSD-T+ACL
12
N
LsLN/Ns
DALI 1DALI 2
N
N
L
L
DALI 1DALI 2
DA
PSD-ACL
DALI 1
DALI 2DA
LL-N/NN- -L
1 4
5 6
1a 1b
3
Push-in (PIP)
LL-N/NN- -L
POE
Condition Philips to specify to the customers (instruction):> to use UTP (Unshielded Twisted Pair) CAT5E or CAT6 cable> the maximum length of the cable to be 20 meters.Apply a minimum radius of the Ethernet cable of 4x the cable diameter.
CLICK
Ls-N/Ns- -L
PSU
L N
min. Ø9max. Ø13
min. 3x0.5mm2
max. 3x2.5mm2
77
10
2
L
N
6/6
“This includes the general mounting instructions incl. notes and legend icons. You can fi nd it on www.philips.com/lighting”
POESensor option 1
!
For use in ventilated space (EN/IEC 60598-2-19)
ATTENTIONOBSERVE PRECAUTIONS
FOR HANDLINGELECTROSTATIC
SENSITIVEDEVICES
The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE
electrical regulations or the national requirements.
Please do not remove the protect film before installing to avoid scraping or dirtying the optical part.
Indoor use only.
During installation or maintaining the luminaire please use gloves to avoid spots on the cover.
To remove dirt and spots use the following:
-
-
-
-
- Dust: use micro fiber cloths only
- Fingerprints, etc.: use a cleaner for synthetic materials with antistatic properties.