Philips Dvp3020k 98 Dfu Eng

DVD VIDEO PLAYER DVP3020

User manual

Thank you for choosing Philips.

Need help fast?Read your User’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:01 PM1

General Information

CAUTION(WARNING LOCATION: ON THEBACKPLATE OF THE SET)

NEVER MAKE OR CHANGECONNECTIONS WITH THEPOWER SWITCHED ON.

Laser safety

This unit employs a laser. Due to possibleeye injury, only a qualified service personshould remove the cover or attempt toservice this device.

NOTE:PICTURES SHOWN MAYBEDIFFERENT BETWEENCOUNTRIES.

Environmental InformationAll unnecessary packaging has beenomitted. The packaging has been madeeasy to separate into three materials:cardboard (box), polystyrene foam(buffer) and polyethylene (bags, protectivefoam sheet).

Your DVD player consists of materialswhich can be recycled and reused ifdisassembled by a specialised company.Please observe the local regulationsregarding the disposal of packagingmaterials, exhausted batteries and oldequipment.

Important Note:Due to the numerous versions of newCD-Audio copy protection orenhanced CD-Audio protectionrecently available on certain discs,Philips is unable to guarantee thatthis DVD Player is fully compatiblewith such new discs. Should you havedifficulty playing any such CD-Audiodiscs, kindly refer them to your CD-Audio disc retailer.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:01 PM2

02(A)_8239 300 34302

3

En

gli

s hB

ahas

a M

elay

u

Index

English ------------------------------------------- 6

--------------------------------- 36

Bahasa Melayu ------------------------------- 66

Manufactured under license from DolbyLaboratories. “Dolby”, “Pro-Logic” and thedouble-D symbol are trademarks ofDolby Laboratories.

Manufactured under license from DigitalTheater Systems, Inc . U.S. Pat. Nois.5,451,942; 5,956,674; 5,974,380;5,978,762; 6,226,616; 6,487,535 andother U.S. and world-wide patents issuedand pending. "DTS" and "DTS DigitalSurround" are registered trademarksof Digital Theater Systems, Inc .All Right Reserved.

This product incorporates copyrightprotection technology that is protected bymethod claims of certain U.S. patents andother intellectual property rights owned byMacrovision Corporation and other rightsowners. Use of this copyright protectiontechnology must be authorized byMacrovision Corporation, and is intendedfor home and other limited viewing usesonly unless otherwise authorized byMacrovision Corporation. Reverseengineering or disassembly is prohibited.

Due to the inconsistency of disc formatsprovided by various disc manufacturers, yourDVD system may require a playabilityenhancement or upgrade. As DVD technologyadvances, these enhancements will becomecommon and will be easy to complete.Go to www.philips.com/support forsoftware upgrade.

Manufactured under license from Dolby Laboratories, "Dolby"and the double-D symbol are trademarks of Dolby Laboratories.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:01 PM3

LASERType Semiconductor laser

GaAlAsWave length 650 nm (DVD)

780 nm (VCD/CD)Output Power 7 mW (DVD)

10 mW (VCD/CD)Beam divergence 60 degree

For Customer Use:

Read carefully the information located atthe rear of your DVD VIDEO player andenter below the Serial No. Retain thisinformation for future reference.

Model No. DVP 3020Serial No. _______________

The apparatus shall not be exposed to drippingor splashing and no objects filled with liquids,such as vases, shall be placed on apparatus.

Specifications are subject to change withoutnotice. Trademarks are the property ofKoninklijke Philips Electronics N.V. or theirrespective owners.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:01 PM4

En

gli

s h

5

Language Code

Abkhazian 6566Afar 6565Afrikaans 6570Amharic 6577Arabic 6582Armenian 7289Assamese 6583Avestan 6569Aymara 6589Azerhaijani 6590Bahasa Melayu 7783Bashkir 6665Belarusian 6669Bengali 6678Bihari 6672Bislama 6673Bokmål, Norwegian 7866Bosanski 6683Brezhoneg 6682Bulgarian 6671Burmese 7789Castellano, Español 6983Catalán 6765Chamorro 6772Chechen 6769Chewa; Chichewa; Nyanja 7889 9072Chuang; Zhuang 9065Church Slavic; Slavonic 6785Chuvash 6786Corsican 6779Česky 6783Dansk 6865Deutsch 6869Dzongkha 6890English 6978Esperanto 6979Estonian 6984Euskara 6985�� 6976Faroese 7079Français 7082Frysk 7089Fijian 7074Gaelic; Scottish Gaelic 7168Gallegan 7176Georgian 7565Gikuyu; Kikuyu 7573Guarani 7178Gujarati 7185Hausa 7265Herero 7290Hindi 7273Hiri Motu 7279Hrwatski 6779Ido 7379Interlingua (International)7365Interlingue 7365Inuktitut 7385

Inupiaq 7375Irish 7165Íslenska 7383Italiano 7384Ivrit 7269Japanese 7465Javanese 7486Kalaallisut 7576Kannada 7578Kashmiri 7583Kazakh 7575Kernewek 7587Khmer 7577Kinyarwanda 8287Kirghiz 7589Komi 7586Korean 7579Kuanyama; Kwanyama 7574Kurdish 7585Lao 7679Latina 7665Latvian 7686Letzeburgesch; 7666Limburgan; Limburger 7673Lingala 7678Lithuanian 7684Luxembourgish; 7666Macedonian 7775Malagasy 7771Magyar 7285Malayalam 7776Maltese 7784Manx 7186Maori 7773Marathi 7782Marshallese 7772Moldavian 7779Mongolian 7778Nauru 7865Navaho; Navajo 7886Ndebele, North 7868Ndebele, South 7882Ndonga 7871Nederlands 7876Nepali 7869Norsk 7879Northern Sami 8369North Ndebele 7868Norwegian Nynorsk; 7878Occitan; Provencal 7967Old Bulgarian; Old Slavonic 6785Oriya 7982Oromo 7977Ossetian; Ossetic 7983Pali 8073Panjabi 8065Persian 7065Polski 8076Português 8084

Pushto 8083Russian 8285Quechua 8185Raeto-Romance 8277Romanian 8279Rundi 8278Samoan 8377Sango 8371Sanskrit 8365Sardinian 8367Serbian 8382Shona 8378Shqip 8381Sindhi 8368Sinhalese 8373Slovensky 8373Slovenian 8376Somali 8379Sotho; Southern 8384South Ndebele 7882Sundanese 8385Suomi 7073Swahili 8387Swati 8383Svenska 8386Tagalog 8476Tahitian 8489Tajik 8471Tamil 8465Tatar 8484Telugu 8469Thai 8472Tibetan 6679Tigrinya 8473Tonga (Tonga Islands) 8479Tsonga 8483Tswana 8478Türkçe 8482Turkmen 8475Twi 8487Uighur 8571Ukrainian 8575Urdu 8582Uzbek 8590Vietnamese 8673Volapuk 8679Walloon 8765Welsh 6789Wolof 8779Xhosa 8872Yiddish 8973Yoruba 8979Zulu 9085

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:01 PM5

En

glish

6

Language Code .................................... 5

IntroductionSupplied accessories ....................................... 8Cleaning discs ................................................... 8Setup ................................................................... 8

ConnectionsConnecting TV ............................................ 9-10

Using Composite Video jacks (CVBS) ........ 9Using Component Video jacks (Pr Pb Y) ... 9Using an accessory RF modulator ............ 10

Connecting the power cord ........................ 10Optional : Connecting to a Stereo System ............................................................................. 11

Stereo system has Dolby Pro Logic or Right/ Left Audio In jack ....................................... 11

Optional: Connecting Digital AV Receiver .............................................................................. 11

Receiver has a PCM, Dolby Digital, orMPEG2 decoder ............................................ 11

Functional OverviewFront and Rear Panels .................................. 12Remote Control ............................................ 13

Getting StartedStep 1: Inserting batteries into theRemote Control ............................................ 14

Using the Remote Control to operate thePlayer ............................................................... 14

Step 2: Setting up the TV ........................ 14-16Setting up Progressive Scan feature (forProgressive Scan TV only) ........................... 15Selecting the colour system thatcorresponds to your TV .............................. 16

Step 3: Setting language preference ........... 17Setting the OSD Language .......................... 17Setting the Audio, Subtitle and Disc menulanguage .......................................................... 17

Disc OperationsPlayable Discs ................................................. 18Region Codes ................................................. 18Playing discs ..................................................... 19Basic playback controls ................................. 19Selecting various repeat/shuffle functions 20

Repeat play mode ......................................... 20Repeating a section within a chapter/track ........................................................................... 20

Operations for video playback (DVD/VCD/SVCD) ........................................................ 21-22

Using the Disc Menu .................................... 21Zooming in ..................................................... 21Slow motion ................................................... 21Forward / Reverse Searching ..................... 21OSD (On-Screen Display) .......................... 22

Special DVD Features ................................... 23Playing a Title ................................................. 23Changing the Audio Language .................... 23Subtitles .......................................................... 23

Special VCD & SVCD Features ................... 23Playback Control (PBC) .............................. 23

Playing MP3/WMA/JPEG (Kodak) Picture CD........................................................................... 24

General Operation ....................................... 24Playback selection ......................................... 24Repeat ............................................................. 24Fast forward / reverse (MP3) ..................... 24

Contents

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:01 PM6

En

gli

s h

7

DVD Menu OptionsGeneral Setup menu ..................................... 25

Dimming system’s display screen .............. 25OSD Language ............................................... 25Sleep ................................................................ 25

Audio Setup Menu ......................................... 26Setting the Downmix ................................... 26Digital Audio Setup ....................................... 26

Video Setup Menu ................................... 27-28TV Type ........................................................... 27Setting the TV Display ................................. 27Progressive - turning on/off ........................ 28Sharpness ........................................................ 28Brightness / Contrast / Color .................... 28

Preference Page ........................................ 29-31Audio, Subtitle, Disc Menu .......................... 29Restricting playback by Parental Control ....................................................................... 29-30Changing the Password ............................... 31Restoring to original settings ..................... 31

Troubleshooting .......................... 32-33

Specifications ...................................... 34

Glossary ......................................................................35

Contents

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:01 PM7

En

glish

8

Supplied accessories

Introduction

Cleaning discsTo clean a disc, use a micro fibre cleaningcloth and wipe the disc from the centerto the edge in a straight line.

CAUTION!Do not use solvents such as benzene,thinner, commercially available cleaners, oranti-static sprays intended for discs.

Since the optical unit (laser) of the DVDsystem operates at a higher power thanregular DVD or CD players, cleaning CDsintended for DVD or CD players maydamage the optical unit (laser). Therefore,refrain from using a cleaning CD.

Setup

Finding a suitable location– Place the set on a flat, hard and stablesurface. Do not place the set on a carpet.– Do not position the set on top ofother equipment that might heat it up(e.g., receiver or amplifier).– Do not put anything under the set (e.g.,CDs, magazines).– Install this system near the AC outletand where the AC power plug can bereached easily.

Space for ventilation– Place the apparatus in a location withadequate ventilation to prevent internalheat build up. Allow at least 10 cm (4.0”)clearance from the rear and the top ofthe set and 5cm (2.0”) from the left andright to prevent overheating.

10cm (4.0") 10cm (4.0")

5cm (2.0")

5cm (2.0")

Avoid high temperatures, moisture,water and dust– Apparatus shall not be exposed todripping or splashing.– Do not place any sources of danger onthe apparatus (e.g., liquid filled objects,lighted candles).

Remote Controlandtwo AAA batteries

Composite videocable (yellow)

Audio cable(white, red)

AC power cable

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM8

En

gli

s h

9

Connections

Connecting TV

IMPORTANT!– You only need to make one videoconnection from the followingoptions, depending on thecapabilities of your TV system.– Connect the DVD system directlyto the TV.

Using Composite Video jacks(CVBS)

1 Use the composite video cable (yellow) toconnect the DVD Player’s CVBS (VIDEO)jack to the video input jack (or labeled asA/V In, Video In, Composite or Baseband)on the TV (cable supplied).

2 To hear the sound of this DVD Playerthrough your TV, use the audio cables(white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to thecorresponding AUDIO IN jacks on the TV(cable supplied).

AUDIO IN

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIO OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

21

IMPORTANT!– The progressive scan videoquality is only possible when using YPb Pr and a progressive scan TV isrequired.

Using Component Video jacks(Y Pb Pr)

1 Use the component video cables (red/blue/green) to connect the DVD system’sY Pb Pr jacks to the correspondingComponent video input jacks (or labeledas Y Pb Pr) on the TV (cable not supplied).

2 To hear the sound of this DVD Playerthrough your TV, use the audio cables(white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to thecorresponding AUDIO IN jacks on the TV(cable supplied).

3 Proceed to page 15 for detailedProgressive Scan set up.

AUDIO IN

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIO OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

1 2

01-35_DVP3020_98_Eng_RC2 04/07/06, 3:30 PM9

En

glish

10

Connections

IMPORTANT!– If your TV only has a singleAntenna In jack (or labeled as 75ohm or RF In,) you will need an RFmodulator in order to view the DVDplayback on the TV. See yourelectronics retailer or contactPhilips for details on RF modulatoravailability and operations.

Using an accessory RF modulator

1 Use the composite video cable (yellow) toconnect the DVD Player’s CVBS jack tothe video input jack on the RF modulator.

2 Use the RF coaxial cable (not supplied) toconnect the RF modulator to your TV’sRF jack.

AUDIO IN

R LVIDEO

INTO TVINT IN

CH3 CH4

2

1

RF coaxial cable to TV

Back of RF Modulator(example only)

Antenna orCable TV signal

After everything is connectedproperly, plug in the AC power cordto the power outlet.Never make or change any connectionswith the power switched on.

When no disc is loaded, pressSTANDBY ON on the DVD Playerfront panel,“NO DISC” may appear on thedisplay panel.

Connecting the power cord

NO DISC

~ AC MAINS

AUDIO OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM10

En

gli

s h

11

Connections

Stereo system has Dolby Pro Logicor Right / Left Audio In jack

1 Select one of the video connections(CVBS VIDEO IN or COMPONENTVIDEO IN) depending on the optionsavailable on your TV.

2 Use the audio cables (white/red) toconnect AUDIO OUT (L/R) jacks ofthe DVD Player to the correspondingAUDIO IN jacks on the stereo system(cable supplied).

Optional: Connecting to a StereoSystem

Optional: Connecting Digital AVReceiver

Receiver has a PCM, Dolby Digital,or MPEG2 decoder

1 Select one of the video connections(CVBS VIDEO IN or COMPONENTVIDEO IN) depending on the optionsavailable on your TV.

2 Connect the COAXIAL jack of the DVDPlayer to the corresponding Digital AudioIn jack on your Receiver (cable notsupplied).

3 Set the DVD Player’s Digital Output toPCM-ONLY or ALL depending on thecapabilities of your Receiver (see page 26“Digital Output”).

Helpful Hints:– If the audio format of the Digital Outputdoes not match the capabilities of yourreceiver, the receiver will produce a strong,distorted sound or no sound at all.

AUDIO IN

STEREO

DIGITAL

OPTICAL

AUDIO IN

DIGITAL

AV Receiver

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM11

En

glish

12

Functional Overview

Front and Rear Panels

Audio Out (Left/Right)– Connect to AUDIO inputs of an

amplifier, receiver or stereo system

COAXIAL (Digital audio out)– Connect to coaxial AUDIO input of a

digital audio equipment

Mains (AC Power Cord)– Connect to a standard AC outlet

CVBS (VIDEO Out)– Connect to CVBS Video input of a TV

YPbPr (Component Video Out)– Connect to YPbPr input of a TV

Caution: Do not touch the inner pins of the jacks on the rear panel.Electrostatic discharge may cause permanent damage to the unit.

9 STOP– Stops playback

2; PLAY/PAUSE– Starts or pauses playback

IR Sensor– Point the remote control towards this

sensor

STANDBY-ON B– Turns the player on or switches it to

standby mode

Disc tray

OPEN/CLOSE /– Opens or closes the disc tray

Display– Shows information about the current

status of the DVD Player

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM12

En

gli

s h

13

Functional Overview

Helpful Hint:Press “STOP” for about 2 seconds toOPEN or CLOSE disc tray.

Remote Control

DISC MENU– Enters or exits the disc contents

menu– Switches on or off the playback

control mode (for VCD version2.0 only)

RETURN / TITLE– To go back to previous menu /

show title menu

PREV ( ¡ )– Skips to the previous title/chapter/

track

NEXT ( ™ )– Skips to the next title/chapter/

track

STOP ( 9 )– Stops playback

PLAY/PAUSE ( 2; )– Starts or pauses playback

MUTE ( H)– Disables or enables sound output

SUBTITLE– Selects a DVD subtitle language

ZOOM– Enlarge a picture on the TV

screen

REPEAT– Selects various repeat mode

REPEAT A-B– Repeats playback a specific section

on a disc

B– Turns the player on or switches

it to standby mode

DISPLAY– Displays information on TV

screen during playback

1 2– Cursor buttons for moving to

the left or right, do a forward/reverse search

3 4– Cursor buttons for moving up/

down, do a slow forward/backward

OK– Confirms an entry or selection

SETUP– Enters or exits system setup

menu.

Alphanumeric keypad 0-9– Selects numbered items in a

menu

AUDIO– Selects an audio language

(DVD/VCD) or audio channels.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM13

En

glish

14

Getting Started

Step 1: Inserting batteries intothe Remote Control

1 Open the battery compartment.

2 Insert two batteries type R03 or AAA,following the indications (+-) insidethe compartment.

3 Close the cover.

Using the Remote Control tooperate the Player

1 Aim the Remote Controldirectly at the remotesensor (IR) on the frontpanel.

2 Do not put any objectsbetween the RemoteControl and the DVDPlayer while operating theDVD Player.

CAUTION!– Remove batteries if they areexhausted or if the Remote Controlis not being used for a long time.– Do not use old and new ordifferent types of batteries incombination.– Batteries contain chemicalsubstances, so they should bedisposed properly.

Step 2: Setting up the TV

IMPORTANT!Make sure you have completed allthe necessary connections. (Seepages 9-10 “Connecting TV”).

1 Turn on the TV and set to the correctvideo-in channel. You should see the DVDbackground screen on the TV.

2 Usually these channels are between thelowest and highest channels and may becalled FRONT, A/V IN, or VIDEO. See yourTV manual for more details.➜ Or, you may go to channel 1 on yourTV, then press the Channel down buttonrepeatedly until you see the Video Inchannel.➜ Or, the TV Remote Control may have abutton or switch that chooses differentvideo modes.➜ Or, set the TV to channel 3 or 4 if youare using an RF modulator.

3 If you are using external equipment, (eg.audio system or receiver), turn it on andselect the appropriate input source forthe DVD player output. Refer to theequipment owner’s manual for detail.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM14

En

gli

s h

15

Setting up Progressive Scan feature(for Progressive Scan TV only)

The progressive scan display twice thenumber of frames per seconds thaninterlaced scanning (ordinary normal TVsystem). With nearly double the numberof lines, progressive scan offers higherpicture resolution and quality.

IMPORTANT!Before enabling the progressive scanfeature, you must ensure:1) Your TV can accept progressive signals,

a progressive scan TV is required.2) You have connected the DVD player to

your TV using Y Pb Pr (see page 9.)

1 Turn on your TV.

2 Turn off your TV progressive scan modeor turn on interlaced mode (refer to yourTV user manual.)

3 Press POWER (B) on the remotecontrol to turn on the DVD player.

4 Select the correct Video Input channel.(See page 14).➜ The DVD background screen appearson the TV.

5 Press SETUP.

6 Press 2 to select {VIDEO SETUP PAGE}.

General Audio Video Preference

TY Type

TV Display

Progressive On

Sharpness Off

Brightness

Contrast

Color

- - Video Setup Page - -

7 Select {PROGRESSIVE} to {ON}, then OKto confirm.➜ The instruction menu appears on theTV.

ACTIVATING PROGRESSIVE SCAN:

1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.

2. CONNECT USING YPBPR (GBR) VIDEO CABLE.

3. IF THERE IS A DISTORTED PICTURE, WAIT

15 SECONDS FOR AUTO RECOVERY.

CancelOK

8 Press 1 to highlight OK in the menuand press OK to confirm.

There will be a distorted picture onyour TV at this state until you turnon the progressive scan mode onyour TV.

9 Turn on your TV progressive scan mode(refer to your TV user manual.)➜ The below menu appears on the TV.

CONFIRM AGAIN TO USE PROGRESSIVE

SCAN. IF PICTURE IS GOOD,

PRESS OK BUTTON ON REMOTE.

CancelOK

0 Press 1 to highlight OK in the menuand press OK to confirm.➜ The set up is complete now and youcan start enjoy the high quality picture.

To deactivate Progressive manually:

� Wait for 15 seconds for auto recovery.

OR

1 Press OPEN CLOSE 0 on the DVDplayer to open the disc tray.

2 Press numeric keypad ‘1’ on theremote control for few seconds.➜ The DVD background screen appearson the TV.

Helpful Hint:– There are some progressive scan TV andHigh-Definition TV sets that are not fullycompatible with this DVD system, resulting inthe unnatural picture when playing back aDVD VIDEO disc in the progressive scanmode. In such a case, turn off theprogressive scan feature on both the DVDplayer and your TV set.

Getting Started

TIPS: The underlined option is the factory default setting.Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM15

En

glish

16

Selecting the colour system thatcorresponds to your TV

This DVD Player is compatible with bothNTSC and PAL. In order for a DVD discto play on this Player, the colour system ofthe Disc, the TV and the DVD Playershould match.


TY Type PAL

TV Display Multi

Progressive NTSC

Sharpness

Brightness

Contrast

Color


1 Press SETUP.

2 Press 2 to select {VIDEO SETUP PAGE}.

3 Press 3 4 to highlight {TV TYPE}, thenpress 2.

4 Press 3 4 to highlight one of the optionsbelow:

PAL – Select this if the connected TV isPAL system. It will change the video signalof a NTSC disc and output in PAL format.

NTSC – Select this if the connected TVis NTSC system. It will change the videosignal of a PAL disc and output in NTSCformat.

Multi – Select this if the connected TV iscompatible with both NTSC and PAL(multi-system). The output format will bein accordance with the video signal of thedisc.

Getting Started

5 Select an item and press OK.➜ Follow the instructions shown on theTV to confirm the selection (if any).

Helpful Hints:– Before changing the current TVStandard setting, ensure that your TVsupports the ‘selected TV Type’ system.– If there is no proper picture onyour TV, wait for 15 seconds for autorecovery.

1. ENSURE THAT YOUR TV SUPPORTS

PAL STANDARD.

2. IF THERE IS A DISTORTED PICTURE

DISPLAYED ON THE TV, WAIT 15 SECONDS

FOR AUTO RECOVER.

CANCELOK

CONFIRM AGAIN TO USE NEW TV TYPE SETTING.

CANCELOK

CHANGING NTSC TO PAL:

To reset to default TV colour systemmanually:

� Wait for 15 seconds for auto recovery.

OR

1 Press OPEN CLOSE 0 on the DVDplayer to open the disc tray.

2 Press numeric keypad ‘3’ on theremote control for few seconds.➜ The DVD background screen appearson the TV.


01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM16

En

gli

s h

17

Step 3: Setting languagepreference

The language options are differentdepending on your country or region. Itmay not correspond to the illustrationsshown on the user manual.

Setting the OSD Language

The On-screen language for the systemmenu will remain as you set it, regardlessof various disc languages.

Display Dim

OSD Language ENGLISH

Sleep

- - General Setup Page - -


Melayu

1 Press SETUP.

2 Press 2 to select {GENERAL SETUPPAGE}.

3 Press 3 4 to highlight {OSDLANGUAGE}, then press 2.

4 Press 3 4 to select a language and pressOK.

Getting Started

Setting the Audio, Subtitle and Discmenu language

You can choose your own preferredlanguage or soundtrack from audio,subtitles and disc menu languages. If thelanguage selected is not available on thedisc, the disc’s default language will beused instead.


Audio English

Subtitle Chinese

Disc Menu French

Parental Spanish

Password Portuguese

Default Polish

Italian

Turkish

- - Preference Page - -

1 Press STOP twice then, press SETUP.

2 Press 2 to select {PREFERENCE PAGE}.

3 Press 3 4 to highlight one of theoptions below at a time, then press 2.– ‘Audio’ (disc’s soundtrack)– ‘Subtitle’ (disc’s subtitles)– ‘Disc Menu’ (disc’s menu)

4 Press 3 4 to select a language and pressOK.

If the language you want is not in thelist, then select {OTHERS},then use the numeric keypad (0-9) onthe remote to enter the 4-digit languagecode ‘XXXX’ (see page 5 “LanguageCode”) and press OK.

5 Repeat steps 3~4 for other languagesettings.


01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM17

En

glish

18

Disc Operations

IMPORTANT!– If the inhibit icon (ø) appears onthe TV screen when a button ispressed, it means the function is notavailable on the current disc or atthe current time.– Depending on the DVD or VIDEOCD, some operations may bedifferent or restricted.– Do not push on the disc tray orput any objects other than disc onthe disc tray. Doing so may causethe disc player malfunction.

Playable Discs

Your DVD Player will play:– Digital Video Discs (DVDs)– Video CDs (VCDs)– Super Video CDs (SVCDs)– Digital Video Discs +

Recordable[Rewritable] (DVD+R[W])– Compact Discs (CDs)– MP3 discs, picture (Kodak, JPEG) files

on CD-R(W).– JPEG/ISO 9660 format– Maximum 30 characters display.– Supported sampling frequencies :

32 kHz, 44.1 kHz, 48 kHz (MPEG-1)16 kHz, 22.05 kHz, 24 kHz (MPEG-2)

– Supported Bit-rates : 32~256 kbps(MPEG-1), 8~160 kbps (MPEG-2)variable bitrates

– WMA files on CD-R(W).– Supported Bit-rates : 32~192 kbps

SUPER VIDEO

Region CodesThis DVD player is designed to supportthe Region Management System. Checkthe regional code number on the discpackage. If the number does not matchthe player’s region number (see tablebelow), the player may be unable toplayback the disc.

Helpful Hints:– It may not be possible to play CD-R/RWor DVD-R/RW in all cases due to the type ofdisc or condition of the recording.– If you are having trouble playing acertain disc, remove the disc and try adifferent one. Improper formatted disc willnot play on this DVD player.

TIPS: The operating features described here might not be possible for certain discs. Always referto the instructions supplied with the discs.

RegionDiscs that can

be played(Example)

U.S.A. andCanada regions

U.K andEurope regions

Asia Pacific,Taiwan,Korea

Australia, NewZealand, Latin America

ALLALL

ALLALL

ALLALL

ALLALL

1

2

3

4

ALLALL 5Russia and India regions

ALLALL 6China, Calcos Islands,Walls and Futuna Islands

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM18

En

gli

s h

19

Disc Operations

Basic playback controlsUnless otherwise stated, all operationsdescribed are based on Remote Controluse.

Pausing playback

1 During playback, press PLAY/PAUSE 2;to pause playback and display a stillpicture.➜ Sound will be muted.

2 Press 4 to select the next picture frame.

3 To resume normal playback, pressPLAY/PAUSE 2; again.

Selecting title/chapter/track/angle

� Press PREV ¡ / NEXT ™ to go to theprevious or next track/chapter.

� In STOP mode, press DISPLAY todisplay the disc information text line fortitle/chapter/track/angle.

� Use alphanumeric keypad (0-9) toenter valid title/chapter/track/anglenumber, then press OK.➜ The playback skips to the selected title/chapter/track/angle.

Stopping playback� Press STOPÇ.

Helpful hints:– Screen saver will start automatically ifthe disc playback is stopped/paused for 5minutes.– The player will automatically switch toPower Standby mode if you do not press anybuttons for 15 minutes after the disc hasstopped playing.

Playing discs

1 Connect the power cords of the DVDPlayer and TV (and any optional stereo orAV receiver) to a power outlet.

2 Turn on the TV power and set to thecorrect Video In channel. (See page 14“Setting up the TV”).

3 Press STANDBY-ON to turn on theDVD player.➜ The DVD background screen appearson the TV.

4 Press OPEN/CLOSE 0 on the front ofthe DVD player.

� You can also hold down the STOP Çbutton on the remote control to openand close the disc tray.

5 Place a disc into the disc tray with thelable facing up, then press OPEN/CLOSE0.➜ For double-sided discs, load the sideyou want to play facing up.

6 Playback will start automatically. If notpress PLAY/PAUSE 2; .➜ If a disc menu appears on the TV, seepage 21“Using the Disc Menu”.➜ If the disc is locked by parental control,you must enter your six-digit password.(See page 31).

� For more playback features, see pages 19-24.


01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM19

En

glish

20

Disc Operations


Selecting various repeat/shufflefunctions

Repeat play mode

The repeat play options vary dependingon the disc type.

1 While playing a disc, press REPEATcontinuously to choose a repeat options.

For DVD– Chapter (currently playing chapter)– Title (currently playing title)– All (entire disc)– Off (cancel)

For Video CD– Track (currently playing track)– All (entire disc)– Off (cancel)

For MP3, Audio CD– Repeat One (currently playing file)– Repeat Folder (all files in selected folder)– Folder (playing all files in one folder once)– Shuffle (all files in current folder at random

playback)– Single (currently playing file once)

For JPEG

In STOP mode,– Repeat One (currently playing file)– Repeat Folder (all files in selected folder)– Folder (playing all files in one folder once)– Shuffle (all files in current folder at random


In PLAY mode,– Repeat One (currently playing file)– Repeat All (playing all files in one disc)– Repeat Off (cancel)– Shuffle (all files in current folder at random


2 To cancel repeat playback, pressSTOPÇ.

Repeating a section within achapter/track

1 While playing a disc, press REPEAT A-Bat your chosen starting point.

2 Press REPEAT A-B again at your chosenend point.➜ The section A and B can be set onlywithin the same chapter/track.➜ The section will now repeatcontinuously.

3 To exit the sequence, press REPEATA-B.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM20

En

gli

s h

21

Operations for video playback(DVD/VCD/SVCD)

Using the Disc Menu

Depending on the disc, a menu mayappear on the TV screen once you load inthe disc.

To select a playback feature or item� Use 1 2 3 4 keys or numeric keypad

(0-9) on the remote, then press OK tostart playback.

To access or remove the menu� Press DISC MENU on the remote.

Zooming in

This function allows you to enlarge thepicture on the TV screen and to panthrough the enlarged picture.

1 During playback, press ZOOMrepeatedly to display the picture withdifferent scales.➜ Use 1 2 3 4 keys to pan through theenlarged picture.➜ Playback will continue.

2 Press ZOOM repeatedly to return tothe original size.


Disc Operations

Forward / Reverse Searching

1 Press 1 2 during playback to select therequired speed: 2X, 4X, 8X , 16X or 32X(backward or forward).➜ Sound will be muted (DVD/VCD) orintermittent (CD).

2 To return to normal speed, press PLAY/PAUSE 2;.

Slow Motion

1 Press 3 during playback to select therequired speed: 1/2, 1/4, 1/8 or 1/16(forward {DVD/SVCD/VCD}).➜ Sound will be muted.

2 To return to normal speed, pressPLAY/PAUSE 2; .

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM21

En

glish

22


Disc Operations

OSD (On-Screen Display)

This function displays disc information onthe TV screen during playback.

1 During playback, press DISPLAYrepeatedly.➜ A list of available disc informationappears on the TV screen.

2 Use 1 2 keys to select an option.

3 Enter hours, minutes and seconds fromleft to right in the time edit box usingremote control numerical key pad.➜ Playback will change to the chosentime or to the selected title/chapter/track.

For DVD➜ {Title CT:TT Chapter XX/TC}: displaysthe total available title and chapters in thedisc and enable to select a chapter forviewing.➜ {Title CT:TT Time X:XX:XX}: displaysthe total available title in the disc andenable to select the hour, minute andsecond of the title.➜ {Chapter CC:TC Time X:XX:XX}:displays the total available chapter in thedisc and enable to select the hour, minuteand second of the title.➜ {Angle 1/2}: displays the total availableangle in the disc and enable to select avalid number and playback will show theselected angle.

For Super VCD, VCD or Audio CD➜ {Disc Go To XX:XX}: enable to selectany part within the disc.➜ {Track Go To XX:XX}: enable to selectany part within the current track.➜ {Select Track XX:TT}: enable to selectany track.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM22

En

gli

s h

23

Disc Operations

Special VCD & SVCD Features

Playback Control (PBC)

For VCD with Playback Control (PBC)feature (version 2.0 only)

� Press DISC MENU to toggle between‘PBC ON’ and ‘PBC OFF’.➜ If you select ‘PBC ON’, the disc menu(if available) will appear on the TV.➜ Use the PREV ¡ / NEXT ™ or thenumeric keypad (0-9) to select a playoption.

� During playback, pressing RETURN/TITLE will return to the menu screen (ifPBC is on).

If you want to skip the index menuand playback directly from thebeginning,

� Press DISC MENU key on the remotecontrol to switch to PBC off.


Special DVD Features

Playing a Title

1 Press DISC MENU.➜ The disc title menu appears on the TVscreen.

2 Use 3 4 1 2 keys or numeric keypad(0-9) to select a play option.

3 Press OK key to confirm.

Changing the Audio Language

For DVD

� Press AUDIO repeatedly to selectdifferent audio languages.

Changing the Audio Channel

For VCD

� Press AUDIO to select the availableaudio channels provided by the disc(MONO LEFT, MONO RIGHT, MIX-MONO, STEREO).

Subtitles

� Press SUBTITLE repeatedly to selectdifferent subtitle languages.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM23

En

glish

24

Disc Operations


Playback selection

During playback, you can;

� Press PREV ¡ / NEXT ™ to select theprevious/next track/file in the currentfolder.

� Press PLAY/PAUSE 2; repeatedly topause/resume playback.

Repeat

� Press REPEAT continuously to accessdifferent ‘Play Mode’.➜ REPEAT ONE: keep a JPEG image still onthe screen or play an MP3 file repeatedly.➜ REPEAT FOLDER: play all files in theselected folder repeatedly.➜ FOLDER: play all files in the selectedfolder.➜ SHUFFLE: play all files in the selectedfolder in random order.➜ SINGLE: play the selected file once,then return to the menu.

Fast forward / reverse (MP3)

� During playback, press 1 2 to fast forwardor reverse playback.

� To resume normal playback, press PLAY/PAUSE 2; .

Playing MP3/WMA/JPEG(Kodak) Picture CD

IMPORTANT!You have to turn on your TV and set tothe correct Video In channel. (See page14 “Setting up the TV”).

� Load a Picture disc (Kodak Picture CD,JPEG).➜ For Kodak disc, the slide show willbegin.➜ For JPEG disc, the picture menuappears on the TV screen. Press PLAY/PAUSE 2; to start the slide-showplayback.

General Operation

1 Load an MP3/JPEG Picture CD disc.➜ The data disc menu appears on the TVscreen.

2 Press 3 4 to select the folder and pressOK to open the folder.

00:00 04:52 128Kbps001/020

Coco - Before

Coco - I love

Coco - Jazz

Coco - Hot spring

Coco - I believe

--

Coco Lee

MP3

MP3

MP3

MP3

MP3

3 Press 3 4 or use the numeric keypad(0-9) to highlight an option.

4 Press OK to confirm.➜ Playback will start from the selectedfile to the end of the folder.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM24

En

gli

s h

25

DVD Setup Menu Options

This DVD Player setup is carried out viathe TV, enabling you to customise theDVD Player to suit your particularrequirements.

General Setup menu

1 In disc mode, press SETUP.

2 Press 1 2 to select ‘General Setup’ icon.

3 Press OK to confirm.

Dimming player’s display panel

You can select different levels ofbrightness for the display screen.

1 In ‘GENERAL SETUP PAGE’, press 3 4 tohighlight {DISPLAY DIM}, then press 2.

100% – Select this for full brightness.

70% – Select this for medium brightness.

40% – Select this for dimming the display.

2 Press 3 4 to select a setting, then pressOK to confirm your selection.


Display Dim

OSD Language

Sleep

- - General Setup Page - -


OSD Language

This menu contains various languageoptions for display language on the screen.For details, see page 17.

Sleep

Sleep function allows you to turn off theDVD Player automatically after a presettime.

1 In ‘GENERAL SETUP PAGE’, press 3 4 tohighlight {SLEEP}, then press 2.

15 MinsTurn off the DVD Player after 15 minutes.




OFFTurn off the sleep function.


01-35_DVP3020_98_Eng_RC2 04/07/06, 2:02 PM25

En

glish

26


Audio Setup Menu


2 Press 1 2 to select ‘Audio Setup’ icon.


Setting the Downmix

This options allows you to set the stereoanalog output of your DVD Player.

1 In ‘AUDIO SETUP PAGE’, press 3 4 tohighlight {DOWNMIX}, then press 2.

STEREOSelect this to change channel output tostereo which delivers sound from only thetwo front speakers.

LT/RTSelect this option if your DVD Player isconnected to a Dolby Pro-Logic decoder.


Digital Audio Setup

The options included in Digital AudioSetup are: ‘Digital Output’ and ‘LPCMOutput’.

1 In ‘AUDIO SETUP PAGE’, press 3 4 tohighlight {DIGITAL AUDIO}, then press 2.

2 Press the 3 4 keys to highlight an option.

3 Enter its submenu by pressing 2.


Digital OutputSet the Digital output according to youroptional audio equipment connection.➜ SPDIF Off: Turn off the digital output.➜ All: If you have connected yourDIGITAL AUDIO OUT to a multi-channeldecoder/receiver.➜ PCM Only: Only if your receiver isnot capable of decoding multi-channelaudio.

Helpful Hints:– If DIGITAL OUTPUT is set to ‘All’, allaudio settings except MUTE are invalid.

LPCM Output

If you connect the DVD Player to a PCMcompatible receiver via the digitalterminals, such as coaxial or optical etc,you may need to adjust ‘LPCM’.Discs are recorded at a certain samplingrate. The higher the sampling rate, thebetter the sound quality.

➜ 48kHz: Playback a disc recorded at thesampling rate of 48kHz.➜ 96kHz: Playback a disc recorded at thesampling rate of 96kHz.



Downmix

Digital Audio

- - Speaker Setup Page - -

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:03 PM26

En

gli

s h

27



Video Setup Menu


2 Press 1 2 to select ‘Video Setup’ icon.


TV Type

This menu contains the options forselecting the colour system that matchesthe connected TV. For details, see page16.

Setting the TV Display

Set the aspect ratio of the DVD Playeraccording to the TV you have connected.The format you select must be availableon the disc. If it is not, the setting for TVdisplay will not affect the picture duringplayback.

1 In ‘VIDEO SETUP PAGE’, press 3 4 tohighlight {TV DISPLAY}, then press 2.

2 Press 3 4 to highlight one of the optionsbelow:

4:3 PAN SCAN –Select this if you havea normal TV and wantboth sides of thepicture to be trimmed or formatted to fityour TV screen.

4:3 LETTER BOX –Select this if you have anormal TV. In this case, awide picture with blackbands on the upper and lower portions ofthe TV screen willbe displayed.

16:9 – Select this ifyou have a wide-screen TV.

3 Select an item and press OK.


TY Type

TV Display

Progressive

Sharpness

Brightness

Contrast

Color


01-35_DVP3020_98_Eng_RC2 04/07/06, 2:03 PM27

En

glish

28



Progressive - turning on/off

In the progressive scan mode, you canenjoy the high quality picture with lessflickers. It only works when you haveconnected the DVD player’s Y Pb Pr jacksto your TV that supports the progressivevideo input. Otherwise, a distortedpicture will appear on the TV. For properprogressive scan set up, see page 15.

1 In ‘VIDEO SETUP PAGE’, press 3 4 tohighlight {PROGRESSIVE}, then press 2.

OFFTo disable Progressive Scan function.

ONTo enable Progressive Scan function.

2 Press 3 4 to select a setting, then pressOK to confirm your selection.➜ Follow the instructions shown on theTV to confirm the selection (if any).➜ If a distorted picture appears on the TVscreen, wait for 15 seconds for autorecovery.

Sharpness

You can personalize your picture colourby adjusting sharpness.

1 In ‘VIDEO SETUP PAGE’, press 3 4 tohighlight {SHARPNESS}, then press 2.

HIGHChoose high to make the picture’s edgesharper.

MEDIUMChoose medium to get a standardpicture.

LOWChoose low to make the picture’s edgesofter.


Brightness / Contrast / Color

Increasing the value will brighten thepicture or vice versa. Choose zero (0) foraverage setting.

1 In ‘VIDEO SETUP PAGE’, press 3 4 tohighlight {BRIGHTNESS}, {CONTRAST}or {COLOR}, then press 2.➜ The menu appears.

Brightness 0

Contrast 0

Color 0

2 Press 1 2 to adjust the setting that bestsuit your personal preference.


01-35_DVP3020_98_Eng_RC2 04/07/06, 2:03 PM28

En

gli

s h

29



Preference Page

1 Press Ç twice to stop playback (if any),then press SETUP.

2 Press 1 2 to select the ‘Preference Page’icon.


Audio, Subtitle, Disc Menu

These menus contain various languageoptions for audio, subtitle and disc menuwhich may be recorded on the DVD. Fordetails, see page 17.


Audio

Subtitle

Disc Menu

Parental

Password

Default


Restricting playback by ParentalControl

Some DVDs may have a parental levelassigned to the complete disc or tocertain scenes on the disc. This featurelets you set a playback limitation level.The rating levels are from 1 to 8 and arecountry dependent. You can prohibit theplaying of certain discs that are notsuitable for your children or have certaindiscs played with alternative scenes.

1 In ‘PREFERENCE PAGE’, press 3 4 tohighlight {PARENTAL}, then press 2.


Audio 1 KID SAFE

Subtitle 2 G

Disc Menu 3 PG

Parental 4 PG 13

Password 5 PGR

Default 6 R

7 NC17

8 ADULT


01-35_DVP3020_98_Eng_RC2 04/07/06, 2:03 PM29

En

glish

30

Restricting playback by ParentalControl

2 Press 3 4 to highlight a rating level forthe disc inserted and press OK.➜ To disable Parental controls and haveall Discs play, select {8 ADULT}.

3 Use the numeric keypad (0-9) to enterthe six-digit password (see page 31“Changing the password”).➜ DVDs that are rated above the levelyou selected will not play unless you enteryour six-digit password.

Helpful Hints:– VCD, SVCD, CD have no level indication,so parental control function has no effect onthese type of discs. This applies to most illegalDVD discs.– Some DVDs are not encoded with arating though the movie rating may beprinted on the Disc cover. The rating levelfeature does not work for such Discs.


Rating explanations

1 KID SAFE– Kids material; recommended especially forchildren and viewers of all ages.

2 G– General Audience; recommended asacceptable for viewers of all ages.

3 PG– Parental Guidance suggested.

4 PG13– Material is unsuitable for children under age13.

5-6 PG-R– Parental Guidance - Restricted;recommended that parents restrict childrenunder 17 from viewing or allow to view onlywhen supervised by a parent or adult guardian.

7 NC17– No children under age 17; notrecommended viewing for children under age17.

8 ADULT– Mature material; should be viewed only byadults due to graphic sexual material, violenceor language.


01-35_DVP3020_98_Eng_RC2 04/07/06, 2:03 PM30

En

gli

s h

31



Changing the Password

The same password is used for bothParental Control and Disc Lock. Enteryour six-digit password when promptedon the screen. The default password is136900.

1 In ‘PREFERENCE PAGE’, press 3 4 tohighlight {PASSWORD}, then press 2 toselect {CHANGE}.

2 Press OK and the menu appears.


Old Password

New Password

Confirm PWD

OK

3 Use the numeric keypad (0-9) to enteryour old six-digit password.➜ When doing this for the first time, keyin ‘136900’.➜ If you forget your old six-digitpassword, key in ‘136900’.

4 Enter the new six-digit password.

5 Enter the new six-digit password a secondtime to confirm.➜ The new six-digit password will nowtake effect.


Restoring to original settings

Setting the DEFAULT function will resetall options and your personal settings tothe factory defaults, except yourpassword for Parental Control and DiscLock.

1 In ‘PREFERENCE PAGE’, press 34 tohighlight {DEFAULT}, then press 2 toselect {RESET}.

2 Press OK to confirm.➜ All settings will now reset to factorydefaults.

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:03 PM31

En

glish

32

WARNINGUnder no circumstances should you try to repair the system yourself, as this willinvalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. Ifyou are unable to remedy a problem by following these hints, consult your dealer orPhilips for help.

Problem Solution

No power – Check if the AC power cord is properly connected.– Press the STANDBY ON on the front of the DVD

system to turn on the power.

No picture – Refer to your TV’s manual for correct Video Inchannel selection. Change the TV channel until yousee the DVD screen.

– Check if the TV is switched on.– If the progressive scan feature is activated but the

connected TV does not support progressive signalsor the cables are not connected accordingly, seepage 15 for proper progressive scan set up ordeactivate the progressive scan feature as below:

1) Turn off your TV progressive scan mode or turn onto interlaced mode.

2) Press OPEN/CLOSE to open the disc tray.3) Press numeric keypad ‘1’ on the remote control for

few seconds.

Distorted picture – Sometimes a small amount of picture distortion mayappear depending on the disc being played back. Thisis not a malfunction.

Completely distorted picture or – Connect DVD Player directly to the TV.black/white picture with DVD – Make sure the disc is compatible with the DVD/

Player.– Ensure that the DVD Player’s TV Type is set to match

that of the Disc and your TV.

No sound or distorted sound – Adjust the volume.– Check that the speakers are connected correctly.

No audio at digital output – Check the digital connections.– Check if your receiver can decode MPEG-2 and if

not, please make sure the digital output is set toPCM.

– Check if the audio format of the selected audiolanguage matches your receiver capabilities.

Troubleshooting

Visit us at www.philips.com/support for service support

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:03 PM32

En

gli

s h

33

Disc can’t be played – The DVD+R/CD-R must be finalised.– Ensure the disc label is facing up.– Check if the disc is defective by trying another disc.– Region code incorrect.

Picture freezes momentarily – Check the disc for fingerprints/scratches andduring playback clean with a soft cloth wiping from centre to edge.

No return to start-up screen when – Reset the unit by switching the player off, then ondisc is removed again.

The player does not respond to – Aim the Remote Control directly at the sensorthe Remote Control on the front of the player.

– Reduce the distance to the player.– Replace the batteries in the Remote Control.– Re-insert the batteries with their polarities (+/–

signs) as indicated.

Buttons do not work – To completely reset the player, unplug the ACcord from the AC outlet for 5-10 seconds.

Player does not respond to some – Operations may not be permitted by the disc.operating commands during playback. Refer to the instructions of the disc jacket.

DVD Player cannot read – Use a commonly available cleaning CD/DVD toCDs/DVDs clean the lens before sending the DVD Player for

repair.

Menu items cannot be selected – Press STOP twice before selecting System Menu.– Depending on the disc availability, some menu items

cannot be selected.

Troubleshooting

Problem Solution

Visit us at www.philips.com/support for service support

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:03 PM33

En

glish

34

TV STANDARD (PAL/50Hz) (NTSC/60Hz)Number of lines 625 525Playback Multistandard (PAL/NTSC)

VIDEO PERFORMANCEVideo DAC 12 bit, 108mHzYPbPr 0.7 Vpp — 75 ohmVideo Output 1Vpp — 75 ohm

VIDEO FORMATDigital Compression MPEG 2 for DVD,SVCD

MPEG 1 for VCD

DVD 50Hz 60HzHoriz. resolution 720 pixels 720 pixelsVertical resolution 576 lines 480 lines

VCD 50Hz 60HzHoriz. resolution 352 pixels 352 pixelsVertical resolution 288 lines 240 lines

AUDIO FORMATDigital MPEG/ AC-3/ compressed Digital

PCM 16, 20, 24 bitsfs, 44.1, 48, 96 kHz

MP3(ISO 9660) 96, 112, 128, 256kbps & variablebit rate fs, 32, 44.1,48 kHz

Analog Sound StereoDolby Surround compatible downmix from Dolby Digitalmulti-channel sound

Specifications

AUDIO PERFORMANCEDA Converter 24 bit, 192 kHzDVD fs 96 kHz 4Hz- 44kHz

fs 48 kHz 4Hz- 22kHzSVCD fs 48 kHz 4Hz- 22kHz

fs 44.1kHz 4Hz- 20kHzCD/VCD fs 44.1kHz 4Hz- 20kHzSignal-Noise (1kHz) > 90 dBDynamic range(1kHz) > 80 dBCrosstalk (1kHz) > 70 dBDistortion/noise (1kHz) > 65 dBMPEG MP3 MPEG Audio L3

CONNECTIONSYPbPr Output Cinch 3xVideo Output Cinch (yellow)Audio Output(L+R) Cinch (white/red)Digital Output 1 coaxial

IEC60958 for CDDA / LPCMIEC61937 for MPEG 1/2,Dolby Digital

CABINETDimensions (w x h x d) 360 x 37 x 235 mmWeight Approximately 2.0 kg

POWER CONSUMPTIONPower Supply Rating 110-240V;

50/60HzPower consumption < 10 WPower consumption in Standby mode < 0.8 W

Specifications subject to change without prior notice

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:03 PM34

En

gli

s h

35

Analog: Sound that has not been turned intonumbers. Analog sound varies, while digital sound hasspecific numerical values. These jacks send audiothrough two channels, the left and right.Aspect ratio: The ratio of vertical and horizontalsizes of a displayed image. The horizontal vs. verticalratio of conventional TVs. is 4:3, and that of wide-screens is 16:9.AUDIO OUT Jacks: Jacks on the back of the DVDSystem that send audio to another system (TV, Stereo,etc.).Bit Rate: The amount of data used to hold a givenlength of music; measured in kilobits per seconds, orkbps. Or, the speed at which you record. Generally,the higher the bit rate, or the higher the recordingspeed, the better the sound quality. However, higherbit rates use more space on a Disc.Chapter: Sections of a picture or a music piece on aDVD that are smaller than titles. A title is composedof several chapters. Each chapter is assigned a chapternumber enabling you to locate the chapter you want.Component Video Out Jacks: Jacks on the back ofthe DVD System that send high-quality video to a TVthat has Component Video In jacks (R/G/B, Y/Pb/Pr,etc.).Disc menu: A screen display prepared for allowingselection of images, sounds, subtitles, multi-angles, etcrecorded on a DVD.Digital: Sound that has been converted intonumerical values. Digital sound is available when youuse the DIGITAL AUDIO OUT COAXIAL orOPTICAL jacks. These jacks send audio throughmultiple channels, instead of just two channels asanalog does.Dolby Digital: A surround sound system developedby Dolby Laboratories containing up to six channelsof digital audio (front left and right, surround left andright, center and subwoofer).JPEG: A very common digital still picture format. Astill-picture data compression system proposed by theJoint Photographic Expert Group, which features smalldecrease in image quality in spite of its highcompression ratio.MP3: A file format with a sound data compressionsystem. “MP3” is the abbreviation of Motion PictureExperts Group 1 (or MPEG-1) Audio Layer 3. By usingMP3 format. one CD-R or CD-RW can contain about10 times as much data volume as a regular CD can.

Multichannel: DVD is specified to have each soundtrack constitute one sound field. Multichannel refersto a structure of sound tracks having three or morechannels.Parental Control: A function of the DVD to limitplayback of the disc by the age of the users accordingto the limitation level in each country. The limitationvaries from disc to disc; when it is activated, playbackwill be prohibited if the software’s level is higher thanthe user-set level.PCM (Pulse Code Modulation): A system forconverting analog sound signal to digital signal forlater processing, with no data compression used inconversion.Playback control (PBC): Refers to the signalrecorded on video CDs or SVCDs for controllingreproduction. By using menu screens recorded on aVideo CD or SVCD that supports PBC, you can enjoyinteractive-type software as well as software having asearch function.Progressive Scan: It displays all the horizontal linesof a picture at one time, as a signal frame. This systemcan convert the interlaced video from DVD intoprogressive format for connection to a progressivedisplay. It dramatically increases the verticalresolution.Region code: A system for allowing discs to beplayed back only in the region designated beforehand.This unit will only play discs that have compatibleregion codes. You can find the region code of yourunit by looking on the product label. Some discs arecompatible with more than one region (or ALLregions).Surround: A system for creating realistic three-dimensional sound fields full of realism by arrangingmultiple speakers around the listener.Title: The longest section of a picture or musicfeature on DVD, music, etc., in video software, or theentire album in audio software. Each title is assigned atitle number enabling you to locate the title you want.VIDEO OUT jack: Jack on the back of the DVDSystem that sends video to a TV.

Glossary

01-35_DVP3020_98_Eng_RC2 04/07/06, 2:03 PM35

Philips Dvp3020k 98 Dfu Eng

Documents