7/26/2019 Philips Bdp 3000 Sm (2)
1/43
BDP3000/12/05/51
Copyright 2009 Philips Consumer Electronics B.V. Eindhoven, The NetherlandsAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without
the prior permission of Philips.
Published by SL0938Service Audio Printed in The Netherlands Subject to modification
Blu-ray Disc Player
Version 1.2
CLASS 1LASER PRODUCT
3141 785 34092
TABLE OF CONTENTSPage
Technical Speci cations .......................................................1-2
Safety Instruction, Warning & Notes .....................................1-3
QSG & DFU Instruction ........................................................... 2
Mechanical and Dismantling Instructions ................................ 3Software Version & Upgrades, Region Code Change ............. 4
Trouble Shooting Chart ........................................................... 5
Set Wiring Diagram .................................................................6
Electrical Diagrams and PCB layouts ...................................... 7
Set Mechanical Exploded view & Parts List ............................ 8
Revision List ............................................................................9
7/26/2019 Philips Bdp 3000 Sm (2)
2/43
Laser Specification
Laser Type:
BD Laser Diode: InGaN/AIGaN
DVD Laser Diode: InGaAIP
CD Laser Diode: A IGaAs
Wave length:
BD: 405 +5nm/-5nm
DVD: 650 +13nm/-10nm
CD: 790 +15nm/-15nm
Output power:
BD: Max. ratings: 20mW
DVD: Max. ratings: 7mW
CD: Max. ratings: 7mW
Specifications
Note
Specification and design are subject to change withoutnotice
Play media
BD-Video, DVD-Video, DVD+R/+RW, DVD-R/-
RW, DVD+R/-R DL, CD-R/CD-RW, Audio CD,
Video CD/SVCD, Picture CD, MP3-CD, WMA-CD,
DivX (Ultra)-CD.
Accessories supplied
Remote control and batteries
Audio/Video cables
Power cable
Quick start guide
User manualCD-ROM built in multi-lingual user manual
(not availabe for UK version)
Video
Signal system: PAL / NTSC
Composite video output: 1 Vp-p (75 ohm)
Component video output : 480/576i, 480/576p,
720p, 1080i
Y: 1 Vp-p (75 ohm)
Pb: 0.7 V-pp (75 ohm)
Pr: 0.7 V-pp (75 ohm)
HDMI output 480p, 576p, 720p, 1080i, 1080p,
1080p24
Audio
2 Channel analog output
Audio Front L + R : 2 Vrms (> 1 kohm)
Digital output: 0. 5 Vp-p (75 ohm)
Coaxial
HDMI output
Sampling frequency:
MP3: 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
Constant bit rate:
MP3: 112 kbps - 320 kpbs
WMA: 48 kpbs - 192 kpbs
USB
As additional memory for software updates
and BD-Live bonus contents . Not for mediaplay.
Main unit
Power supply rating
Europe: 220~240V ~AC, ~50 Hz
Russia: 220~230V ~AC, ~50 Hz
Asia Pacific: 110~240V ~AC, 50~60 Hz
Latin America: 110~240V ~AC, 50~60
Hz
China: 110~240V ~AC, ~50 Hz
Power consumption: 25W
Power consumption in standby mode: 0.25W
Dimensions (w x h x d): 435 x 62 x 237 (mm)
Net Weight: 2.5 kg
1-2
7/26/2019 Philips Bdp 3000 Sm (2)
3/43
Safety instruction
1. General safety
Safety regulations require that during a repair:
. Connect the unit to the mains via an isolation transformer.
. Replace safety components indicated by the symbol ,
only by components identical to the original ones. Any
other component substitution (other than original type)
may increase risk of fire or electrical shock hazard.
Safety regulations require that after a repair, you must
return the unit in its original condition. Pay, in particular,
attention to the following points:
. Route the wires/cables correctly, and fix them with the
mounted cable clamps.
. Check the insulation of the mains lead for external
damage.
. Check the electrical DC resistance between the mains
plug and the secondary side:
1) Unplug the mains cord, and connect a wire between
the two pins of the mains plug.
2) Set the mains switch the on position (keep the
mains cord unplug).
3) Measure the resistance value between the mains
plug and the front panel, controls, and chassis
bottom.
4) Repair or correct unit when the resistance
measurement is less than 1M .
5) Verify this, before you return the unit to the
customer/user (ref. UL-standard no. 1492).
6) Switch the unit off, and remove the wire between
the two pins of the mains plug.
2.Laser safety
This unit employs a laser. Only qualified service personnel
may remove the cover, or attempt to service this device
(due to possible eye injury).
Laser device unit
Type : Semiconductor laser GaAlAs
Wavelength : 650nm (DVD)
: 780nm (VCD/CD)
Output power : 7mW (DVD): 10mW (DVD /CD)
Beam divergence: 60 degree
Note: Use of controls or adjustments or performance of
procedure other than those specified herein, may result in
hazardous radiation exposure. Avoid direct exposure to
beam.
Safety instruction, Warning & Notes
1-3
7/26/2019 Philips Bdp 3000 Sm (2)
4/43
Warning
1.General
. All ICs and many other semiconductors are susceptible to
electrostatic discharges (ESD). Careless handing during
repair can reduce life drastically. Make sure that, during
repair, you are at the same potential as the mass of the
set by a wristband with resistance. Keep components and
tools at this same potential. Available ESD protection
equipment:
1) Complete kit ESD3 (small tablemat, wristband,connection box, extension cable and earth cable)
4822 310 10671.
2) Wristband tester 4822 344 13999.
. Be careful during measurements in the live voltage
section. The primary side of the power supply , including
the heat sink, carries live mains voltage when you
connect the player to the mains (even when the player is
off!). It is possible to touch copper tracks and/or
components in this unshielded primary area, when you
service the player. Service personnel must take
precautions to prevent touching this area or components
in this area. A lighting stroke and a stripe-marked
printing on the printed wiring board, indicate the primary
side of the power supply.
. Never replace modules, or components, while the unit is
on.
2. Laser
. The use of optical instruments with this product, will
increase eye hazard.
. Only qualified service personnel may remove the cover
or attempt to service this device, due to possible eye
injury.
. Repair handing should take place as much as possible
with a disc loaded inside the player.
. Text below is placed inside the unit, on the laser covershield:
Notes: Manufactured under licence from Dolby
Laboratories. The double-D symbol is trademarks of Dolby
Laboratories, Inc. All rights reserved.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN, AVOID EXPOSURE
TO BEAM.
1-4
7/26/2019 Philips Bdp 3000 Sm (2)
5/43
Lead-Free requirement for service
INDENTIFICATION:Regardless of special logo (not always indicated)
One must treat all sets from 1.1.2005 onwards, according
next rules.
Important note: In fact also products a little older can also
be treated in this way as long as you avoid mixing
solder-alloys (leaded/ lead-free). So best to always use
SAC305 and the higher temperatures belong to this.
Due to lead-free technology some rules have to be
respected by the workshop during a repair:
Use only lead-free solder alloy Philips SAC305 with
order code 0622 149 00106. If lead-free solder-paste is
required, please contact the manufacturer of your
solder-equipment. In general use of solder-paste within
workshops should be avoided because paste is not easy
to store and to handle.
Use only adequate solder tools applicable for lead-free
solder alloy. The solder tool must be able
oTo reach at least a solder-temperature of 400C,
oTo stabilize the adjusted temperature at the
solder-tip
oTo exchange solder-tips for different applications.
Adjust your solder tool so that a temperature around
360C 380C is reached and stabilized at the solder
joint. Heating-time of the solder-joint should not exceed
~ 4 sec. Avoid temperatures above 400C otherwise
wear-out of tips will rise drastically and flux-fluid will be
destroyed. To avoid wear-out of tips switch off un-used
equipment, or reduce heat.
Mix of lead-free solder alloy / parts with leaded solder
alloy / parts is possible but PHILIPS recommends
strongly to avoid mixed
solder alloy types (leaded and lead-free). If one cannot
avoid, clean carefully the
solder-joint from old solder alloy and re-solder with new
solder alloy (SAC305).
Use only original spare-parts listed in the
Service-Manuals. Not listed standard-material
(commodities) has to be purchased at external
companies.
Special information for BGA-ICs:
- always use the 12nc-recognizable soldering
temperature profile of the specific BGA (for
de-soldering always use highest lead-free
temperature profile, in case of doubt)- lead free BGA-ICs will be delivered in so-called
dry-packaging (sealed pack including a silica gel
pack) to protect the IC against moisture. After
opening, dependent of MSL-level seen on
indicator-label in the bag, the BGA-IC possibly
still has to be baked dry. This will be
communicated via AYS-website.
Do not re-use BGAs at all.
For sets produced before 1.1.2005, containing
leaded soldering-tin and components, all needed
spare-parts will be available till the end of the
service-period. For repair of such sets nothing
changes.
On our website:
www.atyourservice.ce.Philips.com
You find more information to:
BGA-de-/soldering (+ baking instructions)
Heating-profiles of BGAs and other ICs used in
Philips-sets
You will find this and more technical information
within the magazine, chapter workshop news.
For additional questions please contact your local
repair-helpdesk.
Notes
1-5
7/26/2019 Philips Bdp 3000 Sm (2)
6/43
Settings
Play Disc
2009 Koninklijke Philips Electronics N.V.
All rights reserved
www.philips.com
BDP3000_QSG_V1.0_918
The following excerpt of the Quick Start Guide serves as an introduction to the set.
The complete Direction For Use can be download in different languages fromPhilips Customer Contact & Support site: www.p4c.philips.com
2-1
7/26/2019 Philips Bdp 3000 Sm (2)
7/43
HDMI
Y PBPR& AV OUTPUT L/R
VIDEO & AV OUTPUT L/RVideo Setup
Advanced Setup
Audio Setup
Preference Setup
EasyLink Setup
OSD Languag
Parental Contr
Screen Saver
Display Panel
Auto Standby
PBC
Change PIN
Video Setup
Advanced Setup
Audio Setup
Preference Setup
EasyLink Setup
OSD Language
Parental Contro
Screen Saver
Display Panel
Auto Standby
PBC
Change PIN
2-2
7/26/2019 Philips Bdp 3000 Sm (2)
8/43
2009 Koninklijke Philips Electronics N.V.
All rights reserved
www.philips.com
Settings
7/26/2019 Philips Bdp 3000 Sm (2)
9/43
Video Setup
Advanced Setup
Audio Setup
Preference Setup
EasyLink Setup
Menu Lang
Parental Co
Screen Sav
Display Pan
Auto Stand
VCD PBC
Change Pa
Menu Language
Parental Control
Screen Saver
Display Panel
Auto Standby
VCD PBC
Change Password
HDMI
Y PBPR& AV OUTPUT L/R
VIDEO & AV OUTPUT L/R
7/26/2019 Philips Bdp 3000 Sm (2)
10/43
Front panel
display
Description
LOADING Loading a disc.UNSUPP The disc is not supported.
BD Blu-ray disc is recognized.
HDMI ERR The HDMI video resolution is
not supported by TV.
FASTFWD Fast forward mode.
FASTBWD Fast reverse mode.
SLOWFWD Slow forward mode.
SETTINGS Setup menu is displayed.
HOME Home menu is displayed.
CHAPTER Current chapter is in chapter
repeat mode.
RESUME Resume play is possible.DOLBY D Dolby Digital audio is being
played.
DOLBY HD Dolby HD audio is being
played.
UPGRADE Software upgrade is in
progress.
Product overview
Main unit
aTurn on the disc player or switch to
standby mode.
When EasyL ink is enab led, switch the
disc player and all EasyLink devices to
standby. Note that you must press and
hold for at least 3 seconds for this to
occur.
b Disc compartmentc
Open or close the disc compartment.
d IR sensorPoint the remote control at the IR sensor.
e Display panel
fStart or resume play.
gPause play.
Move the paused picture one step
forward.
2-3
7/26/2019 Philips Bdp 3000 Sm (2)
11/43
c TOP MENU BD : Display the top menu.
DVD: Display the title menu.
d
Access the home menu.
e DISC MENU / POP-UP MENU BD : Access or exit the pop-up menu.
DVD: Access or exit the disc menu.
f OK Confirm an entry or selection.g
Navigate through the menus.
h BACKReturn to a previous display menu.
i /Skip to the previous or next title, chapter,
or track.
j /Search backward or forward.
kMute volume (applicable only to certain
Philips brand TVs).l +/-
Adjust volume (applicable only to certain
Philips brand TVs).
m SUBTITLESelect a subti tle language on a disc.
n AUDIOSelect an audio language or channel on
a disc.
o Alphanumeric buttonsSelect an item to play.
Enter values or letters (via SMS style
entry).
pOpen or close the disc compartment.
q TV CH +/-Select a TV channel (applicable only to
certain Philips brand TVs).
rStop play.
sPause play.
Move the paused picture one step
forward.
tStart or resume play.
u INFODisplay the current status or the disc
information.
Remote control
aTurn on the disc player or switch to
standby mode.
When EasyLink is enabled, switch the
disc player and all EasyLink devices to
standby. Note that you must press andhold for at least 3 seconds for this to
occur.
b BONUSVIEWTurn on or off the secondary video
in a small screen window during play
(applicable only to BD-video that
supports the BONUSVIEW or Picture-
In-Picture feature).
2-4
v OPTIONSAccess options for the current activity or
selection.
w Color buttons BD : Select tasks or options.
x HDMISelect the video resolution of HDMI
output.
y REPEATSelect repeat play or random play.
7/26/2019 Philips Bdp 3000 Sm (2)
12/43
Mechanical and Dismantling InstructionsDismantling Instruction
The following guidelines show how to dismantle the player.Step1:Remove 6 screws around the Top Cover, and then remove the Top Cover (Figure 1).
Figure 1
Step2: If it is necessary to dismantle Loader or Front Panel, the Front door should be removed first. (Figure 2)
Note: Make sure to operate gently otherwise the guider would be damaged.
Figure 2
3-1
Please kindly note that dismantle the front door
assembly carefully to avoid damage tray and the front door.
Detailed information please refer to the model set.
7/26/2019 Philips Bdp 3000 Sm (2)
13/43
Mechanical and Dismantling Instructions
Dismantling Instruction
Step3: If the tray cant open in normal way, you can make it through the instruction as below (Figure 3).Note: Make sure to operate gently otherwise the guider would be damaged.
Figure 3
Step4: Dismantling Front Panel, disconnect the connectors(J306, CN502), need release 5snaps of Front Panel
and 2 snaps ofbottom cabinet , then gently pull the Panel out from the set. (Figure 4 - Figure 6)
Figure 4
3-2
Detailed information please refer to the model set.
J303
J320
J306
PWR1
CN504 CN502
7/26/2019 Philips Bdp 3000 Sm (2)
14/43
3-3
Mechanical and Dismantling InstructionsDismantling Instruction
Figure 5
Figure 6
Detailed information please refer to the model set.
Step6: Dismantling Main Board, first disconnect the connector (J320), and then remove 7screws. (Figure 6)
Step7: Disconnect connector (CN504, CN502) and remove 6screws on Power Board to dismantle the Power Board. (Figure 6)
Step5: Dismantling Loader, disconnect the 1connector (J303) aiming in the below figure, and remove 4screwsthat
connects the loader and the bottom cabinet. (Figure 5)
7/26/2019 Philips Bdp 3000 Sm (2)
15/43
4-1
Software check and upgrade
Preparation to upgrade software
1)Start the CD burning software & create a folder named "UPG", B. Read out the software versions to confirm upgrading
2)Then copy the Bin file (BDP3XXXXX-XXX-XXXXXX.bin) into it,
3)Burn the data onto the blank CD. 1) Power on the set and open the tray door.
2) Press button on the reomote control.
A. Procedure for software upgrade 3) Select , then press .
A) Upgrade software via Disc 4) Select , press right cursor to choose
1) Power on the set and insert the prepared Upgrade , then press , the software version
CDR. and other information will display on the TV screen as below:
2) The set will starts reading disc & response with the Mainboard:XXX.XXX
following display TV screen: Driver:XXXXXX XXXXXXXX
Now searching for upgrade software! BDP3XXX
Please wait! http://www.philips.com/support
Still MAC:XX-XX-XX-XX-XX-XX
3) Press button to confirm, then screen will display :
An upgrade software has been found! Caution: The set must not be power off during
Start upgrade with version:WKXXX.X? upgrading, otherwise the Main board will be
Cancel Start damaged entirely.
4) Press Right cursor button to choose "Start", then press ;
5) The software will updagrde and screen will display as below:
Upgrade is ongoing, Please wait
Please do not unplug or switch off the device. DVD Region code change
6) The screen will display as below when upgrading complete:
Upgrade has completed successfully! 1).Power on the set and keep no disc.
Power off after 1s. 2).In the Home menu, press button.
Power Off 3).Input below new region number by the remote control, then it
5) Restart the set. will change after restart the player.
B) Upgrade softwar via network: Number Region
1) Setup the network connection (See "Getting started">"Set up 1211 2
network"). 1361 3
2) In the Home menu, select -- 1431 4
-. 1521 5
* You are prompted to start upgrading processes if upgrade 1641 6
media is detected.
3) Follow the instructions on the TV screen to confirm update
operation. Remark: BD disc region code change only by upgrade software.
* Once software updated is complete, this player automatically
truns off to standby.
4) Disconnect the power cord for a few seconds and connect again to turn on the player.
C) Update software via USB Flash Drive:
1) Go to www.philips.com/support to check if the latest software
version is available for this player.
2) Download the software onto a USB flash drive.
3) Insert the USB flash drive to the USB jack of the rear panel.
4) In the Home menu, select ---.
5) Follow the instructions on the TV screen to confrim update operation.
* Once software update is complete, this player automatically turns to
standby.
6) Disconnect the power cord for a few seconds and connect again to
turn on the player.
7/26/2019 Philips Bdp 3000 Sm (2)
16/43
No display on VFD, and buttons do not work
No
No
No
Yes
Yes
No display on VFD, andbuttons do not work
Check every supply
voltage on main board is
normalRefer to Power supply board part
Check the U2s pin 2,4,8 arrive the
U3s pin 6,8,9 connect condition
Correct connection
Replace U3 or VFD
Yes
Yes
Yes
No
Check-28V,5V,+12V
voltage on the power
and front board
Check the front board
signals SCK,SDA, STB
1.Check whether bad solder exists
on U3 and pins of VFD,
2.Check whether the circuit
connected to K1, K2, K3, K4, K5,
K6 is broken.
Fix the connection JP4 on front board
and XP2 on power board
Trouble shooting chart5-1
7/26/2019 Philips Bdp 3000 Sm (2)
17/43
No audio output
Check the U12 power supply
Check the U12 power supply
(U17.4=-12V and U17.8=12V)
Check whether the audio
signal is right from the
U11.7 and U11.1
Check the connection of
the 6PIN cable from
CON3 on the main board
Connect the 6pin cable to
JP2 properly on output
board
solder the FB9 or FB11
properly
Yes
Yes
No
Go
Check whether the audio signal
is right from the U12.44 and
U12.45
No audio output
No
Yes
Trouble shooting chart5-2
Replace the U12
Replace the U17
Yes
NO
NO
Check whether the
FB11and FB9 solder is
OK on out ut board
Replace the output
board
Yes
7/26/2019 Philips Bdp 3000 Sm (2)
18/43
Remote control does not work
Go
YesNo
yes
Remote control
does not work
NO
Replace the battery for remote
controller
Check whether the remote
controllers battery is
exhausted or not.
Check the U1 power
supply is OK,U1.3 is
about 5V
Check the VCC net no front board
Replace U1.
Yes
Trouble shooting chart5-3
7/26/2019 Philips Bdp 3000 Sm (2)
19/43
Cant read disc or cant open the disk door
Yes
Check the connection of the 4PIN cable
from CN6 on the Power Board.
Cant read disc or cant
open the disk door
Check 40pin cable from
main board connection to
the loader is normal
Check the peripheral components near the
J3 on the main board.
NO
GO
Check whether the
DVD loader running is
normal
Fix the connection the 40pin cableNO
Yes
Trouble shooting chart5-4
7/26/2019 Philips Bdp 3000 Sm (2)
20/43
No VFD display
Check whether the
voltage between VFD
F1&VFD F2 is AC3V
Go
No
No
No VFD display
Yes
Fix the connection power board
CN6& front board JP4
Check whether the voltage
+5Vstb on the front board is
normal work or not.
Check DC5V to AC 3V switch circuit
Replace U3 or VFD.
Yes
Check whether the
voltage -24V is normal
NoCheck the FB7 on the front board
Trouble shooting chart5-5
7/26/2019 Philips Bdp 3000 Sm (2)
21/43
Fan dont work
Check the cable
connection fan to Power
board CN1
Go
No
No
Fan dont work
Yes
Check R8 on Power board
Check on Power board
whether CN.1 is +11V
Replace the cable
Replace Fan
Yes
Trouble shooting chart5-6
7/26/2019 Philips Bdp 3000 Sm (2)
22/43
P.9
P.11
Ethernet
MTK8520
USBDC in
DC/DC1.2V
DC/DC 1.8V
SOC
SATA1
L-R-CVBS-COAXHDMI Component
ResetBtn
P.5
P.6 P.6
P.8 P.8
CLOCK
DDR2-1L
DDR2-1H
DDR2-0L
DDR2-0H
P.4
AUD-CO
N
DC/DC3.3V
NAND FLASH
+5VGNDGN+12
front board
IR_
IN
ACK
GND
VSTB
VCK
VD
POW_SWGNDLED-2
LED-
switch board
ASA LOADER
+5V
GND
GND
+12V
SATA
serial flash
BDP3000 Wiring Diagram
6-1
7/26/2019 Philips Bdp 3000 Sm (2)
23/43
A
A
B
B
C
C
D
D
1
2
3
4
+5V
+12V
+5V
VDVCLKVSTB
+12V
IR
MRST
POW_SW
ACKPCON
M_IR
MXOUTMXIN
IR_IN
GND-24V
+12V
+5VSTANBY
-24V
-24V
LED-
MXOUT MXIN
MRST
+5VSTANBY
LED-2
POW_SW
LED-
ACKIR_IN
GND
VDVCLK
VSTB
LED
-2
+5V
+5VSTANBYIR
POWEK
PCON
MXIN
ACK
MRST
M_IR
MXOUT
POW_SW
IR
IR
PCON
LED-
POWEK
+5V
+5VSTANBY
+5VSTANBY
GND
GND
+5VSTANBY
GND
+5VSTANBY
+5VSTANBY
+5VSTANBY
to power board
RESET Circuit
MCU CIRCUIT
SWITCH BOARD
to main board
SH69P20C
ET8656
USE UNUSE
R229 R230
R230 R229
+
CE647uF/16V
C18
100pF
5PIN/2.0mm
JP1
12345
R2210K
R 53 1 0K /N C
C70.1uF
R32
47K
C327pF
R35 1k+CE7
47uF/16V
R2 2.2
R40
4.7K/NC
R42 100
R30100 ohm
R1
470
R13
1K
R1533R
Q13904
R21
1K
Q23904
R 55 1 0R /N C
C14
100pF
L 3 F B50 0R
C21
47p
F
Q43904
C1247pF
R45 470
R41
2.2K
+ CE510uF/16v
R3
10K
R471K
R1210K
R8 18K
R18100
HT46R52
U2
PA3/PFD1
PA22
PA13
PA04
PD0/PWM5
VSS6
PB0/AN07
PB1/AN18
PA6 14
PA7 13
OSC2 12
OSC1 11
VDD 10
RES 9
PA5/INT 15PA4/TMR 16
R6 330
R39
2.2K
+
CE1
3.3uF/50V
Y1
8MHz
R1910K
R17 0R
R 9 4 .7 K
U4D16311
SW1
1
SW2
2
S14G15
28
S13G16
27
VSS51 S1K1 15
SW3
3
SW4
4
DOUT
5
DIN
6
IC
7
CLK
8
STB
9
KEY1
10
KEY2
11
KEY3
12
KEY4
13
VCC 14
S2K2 16S3K3 17S4K4 18S5K5 19S6K6 20S7K7 21S8K8 22S9K9 23
S10K10 24S11K11 25S12K12 26
S15G14
29
S16G13
30
S17G12
31
S18G11
32
VCC
33
VEE
34
S19G10
35
S20G9
36
GRID8
37
GRID7
38
GRID6
39
GRID540
GRID441
GRID342
GRID243
GRID144
VCC45
LED546
LED447
LED249 LED348
LED150
OSC52
IR1
REM
IR 1GND 2VCC 3
GND4
GND5
C15
100pF
C2247p
F
R36 10K/NC
C60.1uF
R23 56K
VFD1
VFD20-0824
F2
1
F2
2
2G
5
3G
6
4G
7
5G
8
6G
9
7G
10
8G
11
NC
12
P1
13
P14
27
P15
28
NC
29
NP
30
F1
31
F1
32
NC
26
P13
25
P12
24
P11
23
P10
22
P9
21
P3
15
P2
14
NP
3
1G
4
P4
16
P5
17
P6
18
P7
19
P8
20
R43 100
R49 100
R58100
C19
0.1uF
ZD1
6.2V
C250
.1u
F
R54 10R/NC
R10
10K
R37
2.2K
R7 5.6
C5
0.1uF
C1 0. 1u
R 46 0 R/ NC
R1 6 0 R
R31
47K
R5 470
C240
.1u
F
+
CE447uF/16v
R14 100k
R56
10K
R28
1K
C427pF
C110.1uF
C17
100pF
K
R20
10K
R34 1kR33
150
R44 100
R57
10K
R38
2.2K
C13
100pF
R52
10K/NC
C2347p
F
R 51 0 R /N C
6PIN/2.0mm
JP2
123456
ET8656/SH69P20C
U3
PA21
PA32
T0/PD23
RES/PD34
VSS5
PB06
PB17
PB28
OSCI/PD1 16
OSCO/PD0 15
VDD 14
PC3 13
PC2 12
PC1 11
PA0 17PA1 18
PB39 PC0 10
ZD25.1V
R271K
R4
470
Q33906
D1
1N4148
C2
1000pF
R48
47K
Q5
3904
R11
1K
+
CE322uF/50V
+
CE23.3uF/50V
C260
.1u
F
Q6
3904/NC
K
R292.2k
JP3
PICH=2.01234
Front Board Electric Diagram:
7-1
7/26/2019 Philips Bdp 3000 Sm (2)
24/43
A
A
B
B
C
C
D
D
1
2
3
4
POW_SW
SWITCH BOARD
C1
47PfD1
LED2_5C2
47Pf
K1
PLAY
CON1
PICH=2.0
4321
Switch Board Electric Diagram:
7-2
7/26/2019 Philips Bdp 3000 Sm (2)
25/43
A
A
B
B
C
C
D
D
1
2
3
4
+M
+12V
+M
+5VSTB
THE PARTS MARKED WITH ARE IMPORTANT PARTS ON THE SAFETY.
PLEASE USE THE PARTS HAVING THE DESIGNATED PARTS NUMBER WITHOUT FAIL.
* CAUTION :
ZD50612V /0.5W
R5311k
U501FSQ0565RN
Vstr6
Sync
5
Vfb4
GND2
Drain 1
VCC 3
CY502
1000P/400Vac
L66.8uH
R5310k
R501470K
U502PC123X
1
2
4
3
R539470K R521
10k
D505MBR1045
R540470K
CX5020.22uF/275Vac
R5262.49k 1%
PAS
Q502S8050
R523470R
ZD50233V 1/2W
Q5032N3906
LF50130mH
Q5042N3904
T501EER28/28 11
1
2
6
12
9
4
3
7
8
10
RV50114K471
CN501AC INPUT
+1 + 2
R5201k
PAS
C5030.1uF
R503470K
PAS
C5020.01UF/50V C506
222/50V
+CE50547uF/35V
D504FR107
CN506AC INPUT
N1 L 2
R5272.4k 1%
R53833K
R522390
R50422
ZD50115V /0.5W
R517470k
CY504102/400Vac
R1
PASF501
T2AL/250Vac
R51512K
PAS
PAS
C5080.1uF
ZD508P6KE200
PAS
+
CE50247UF/35V
PAS
PAS
ZD50415V /0.5W
U503TL431
2
1
3
PAS
R50533K
R5241k
R513 2.2R
C509100PF
R516100kR511
100K
R535100
+
CE501100uF/400V
C501222/1KV
R51222
D502FR102
-
+BD501KBP306
3
1
2
4
R5251.2k
R50922R
R5410k
+
CE5092200uF/10V
CX5010.22uF/275Vac
D503SR306
R518240R
D501FR107
TR5015D205
U504KA278R12
VO 2IN1
GND
3
C
4
A
4
+
CE510470uF/10V
C5114.7UF
CY501
1000P/400Vac
+
CE5031000uF/16V
R51418K
R53010k
Power Board Electric Diagram:
7-3
7/26/2019 Philips Bdp 3000 Sm (2)
26/43
A
A
B
B
C
C
D
D
4
3
2
1
1.8V_LX
+5VIN
-12VIN
+12VIN
5V_G
+5VIN
+5VIN
+5VIN
RESET#
1.1V_LX
GNDGND
+5VIN
+12VIN
VCC
3.3V 3.3VA
VCC_543315V_P2
5V_USB+5VIN
5V_P1+5VIN
5V_P2+5VIN
+5VIN 5V_P3
+12V+12VIN
-12V-12VIN
3.3V
1.1V
5V_P3
5V_P3
VCC
VCC
VCC_14825V_P1
3.3V1.2VA
RESET# (4,5,9)
1.8V Power Circuit
3
Reset#
G691L
2
Vcc
1
GND
RESET Circuit
1.1V Power Circuit
FB567 FB/0805
CB10.1uF
C5780.01uF
L110uH/LQH66SSN2R2M03
C583NC/0.01uF
CTP1
CE59422uF/10V
FB574 0805-L
CTP2
CTP4
CTP7
D5150SR360
FB571 0805-L
R12201K
C60468pF
+CE554100uF/10v
POR
U1
G691L293T73U
GND
1
RESET# 2
VCC
3
CB9660.1uF
U3G1084-ADJTO-263-3/SMD
IN3
ADJ/GND
1
OUT 2
L862 1206-L
L8534.7uH/LQH66SSN2R2M03
CE59522uF/10V
C20.1uF
CB9950.1uF
CB20.1uF
+CE581
220uF/16V
C564
0.1uF/NC
CB9940.1uF
R134029.4K
R1338332K
R10
CTP5
CB9440.1uF
U908
TPS54331D
BOOT1
VIN2
EN3
SS4 VSNS 5COMP 6
GND 7PH 8
CB10030.1uF
Q208
AO3401
AO3401
1
2 3
CB955open
CTP8
CB993
0.1uF
FB570 0805-L
R1259NC/68.1K
C30.1uF
FB566 FB/0805
R1341NC/68.1K
FB569 0805-L
CB10000.1uF
U909
TPS54331D
BOOT1
VIN2
EN3
SS4 VSNS 5COMP 6
GND 7PH 8
+CE579
220uF/10v
CB9920.1uF
CB10010.1uF0603-C
+CE577220uF/16V
R8.
+CE6100uF/10v
CB9970.1uF
+CE566
220uF/10V
+CE563
220uF/10v
C6035600pF
CB9650.1uF0603-C
Q2062N3904
1
2
3
C6050.01uF
R10
180_1%0603-R
R1219 100K
C6004.7uF
FB558
FB/0805
R 12 56 3 32 K
C58068pF
FB564 FB/0805
CB30.1uF
C5764.7uF
R1221
10K
CTP6
R210
F B5 65 F B/ 08 05
C6020.01uF
R125829.4K
C5810.01uF
CE59222uF/10V
L8 63 1 20 6- L
FB575 FB/0805
FB554 FB/0805
CTP3
CB957
0.1uF
+CE571220uF/10V
+ CE4220uF/10v
C5774.7uF
R110K
R121820K
FB580 FB/0805
C6014.7uF
PWR1CON8P-2.54
2
3
4
5
6
7
8
1
+CE569220uF/10V
R9110_1%0603-R
CE59322uF/10V
+CE567220uF/10V
FB576 0805-L
D5190SR360
C5795600pF
CB9960.1uF
+ CE7220uF/6.3v
J320
4x1
CONF4-XP
4321
R1331NC/332K
C606NC/0.01uF
U4
AP1122DLSOT223/SMD
ADJ/GND1
OUT 2IN3
C5631uF
Main Board Electric Diagram: Power
7-4
7/26/2019 Philips Bdp 3000 Sm (2)
27/43
7/26/2019 Philips Bdp 3000 Sm (2)
28/43
7/26/2019 Philips Bdp 3000 Sm (2)
29/43
7/26/2019 Philips Bdp 3000 Sm (2)
30/43
7/26/2019 Philips Bdp 3000 Sm (2)
31/43
A
A
B
B
C
C
D
D
4
3
2
1
SCLSDA
ETTXD1 AMUTE
AOSDATA2_RAMUTE
ETRXD3
GPIO1
VDD3.3_USB
USBP0
GPIO10
ETRXER
GPIO3
USBM0
ETTXER
ETTXD2
ETCRS
ETRXD0
GPIO2
USB_XTALO
ETTXD3
ETCOL
ETTXD0
ETRXD2
EFPWRQ33
USBM1
SDA_R
ETMDIO
USB_XTALI
USBP1
SCL_R
ETTXD1
GPIO0
ETTXEN
ETRXD1
ETMDC
ETRXDV
VDD1.2_USB
PAD_VRT
US
VCC_USB
GPIO14 DAC_RST#
ETTXCLK
ETRXCLK
GPIO11 4385_CS
USBP0
USBM0 US
EFPWRQ
1.1V
1.1V
DVDD3IO3.3V
DVDD3IO
3.3VA
1.2VA3.3V 3.3V3.3V
5V_USB
+12V
ETMDIO (9)ETMDC (9)
ETTXD0 (9)ETTXCLK (9)
ETTXEN (9)
S CL (8)S DA ( 8)
E TRXCLK (9)ETRXD0 (9)
ETTXD1 (9)
ETCRS (9)
ETRXDV (9)ETRXER (9)
ETTXD2 (9)
ETRXD1 (9)
ETRXD3 (9)
ETTXD3 (9)
ETCOL (9)
ETRXD2 (9)
DAC_RST# (8)
ETTXER (9)
4 38 5_ CS ( 8)
ETTXD3: 1=>MLC/SLC, 0=>Test
A_MUTE: 0=> Default, 1 => Ma
ETTXD1: 0=> Default, 1 => 2n
HW Trapping:
AOSDATA2: 1=>flash_boot, 0=d
CB3250.1uF
CB3400.1uF
CB3310.1uF
+ CE308470uF/10V
R1357 0R
CB3300.1uF
TV
S
Arr
ays
D516
RClamp0522P/NC
11
22
GND3 GND 4
5 5
6 6
CB3410.01uF
CB3230.1uF
TP1035
C3174.7uF0805-C
CB3460.01uF
CB3220.1uF
CB3240.1uF
FB310FB/0805
R1332NC/0
CB1004
0.1uF
CB3440.1uF
TP977
R1173
10K/NC
CB3480.1uF
R1169100R
CB3270.1uF
F1
800mA
R1333NC/0
CB3320.01uF
TP1034
TP1018
CB0.1
FB308 FB/0603
R1177
10K
C3164.7uF0805-C
CB3200.1uF
Q211AO3402
1
2 3
CB3190.1uF0402-C
TP1033
CB3420.1uF
R11
10K
CB3210.1uF
TP1019
CB3450.01uF
R1260
4.7K
FB309 FB/0603
R1170
100R
TP978
TP1032
CB3330.01uF
CB963
0.1uF
R360 33RR359 33R
CB3290.1uF
+
CE307470uF/10V
R11
10K
R1174
10K/NC
CB3180.1uF0402-C
CB990NC/0.1uF
CB3470.1uF
CB3340.1uF +
CE306470uF/10V
TP1031
CB3390.1uF
CB3280.1uF
U107D
MT8520-27x27
ETMDIO B7
ETRXCLK E6
ETRXD0 B5
ETRXD1 A5
ETRXD2 E7
ETRXD3 D6
ETRXDV C5
ETTXD0 B4
ETTXD1 A4
ETTXD2 C4
ETTXD3 B3
ETTXCLK D5
ETRXER C6
ETTXEN A3
ETTXER D7
ETMDC E8
ETCOL C3
ETCRS B6
GPIO0 AE3
GPIO1 AD4
GPIO2 AF3
GPIO3 AF4
GPIO10 AE1
GPIO11 AF1
GPIO14 G20
SDA AD1SCL
AC2
USB_DP0 U2
USB_DM0 U3
USB_DP1 W2
USB_DM1 W1
USB_VRT V3
USB_XTALO V1
USB_XTALI V2
AVDD12_USB U4
AVSS12_USB T5
AVSS33_USB U5
AVDD33_USB V4
EFPWRQ_UAA4
EFPWRQ_TAB3
VCCKK11
VCCKK12
VCCKK15
VCCKK16
VCCKL10
VCCKL11
VCCKL13
VCCKL14
VCCKL16
VCCKL17
VCCKM10
VCCKM17
VCCKN11
VCCKN16
VCCKP11VCCKP16
VCCKR10
VCCKR17
VCCKT10
VCCKT11
VCCKT13
VCCKT14
VCCKT16
VCCKT17
VCCKU11
VCCKU12
VCCKU15
VCCKU16
VCCKAA5
VCCKAB4
VCCKAB5
VCCKAC3
VCCKAC4
VCCKAD2
VCCKAD3
VCCKAE2
DVCC3IO_2D8
DVCC3IO_3E20
DVCC3IO_3E21
DVCC3IO_2E9
DVCC3IO_2F4
DVCC3IO_2G5
DVCC3IO_1Y5
DVCC3IO_1AC5
DVCC3IO_1AD6
CB3380.01uF
CB991NC/0.1uF
R1178
10K
R358 5.1K_1%
R1261 0R
CB3490.01uF
CB3260.1uF
CB3430.01uF
Main Board Electric Diagram: PART 4
7-9
7/26/2019 Philips Bdp 3000 Sm (2)
32/43
A
A
B
B
C
C
D
D
4
3
2
1
Y3
G/ Y
CVBS
COAXOUT
R/V
B/U
VCC_CVBS
VCC_6363 VCC_6363
VCC_6363
VCC_6363
VCC_6363
VCC VCC_6363
VCC_CVBS
VCC_CVBS
ASPDIF(4)
Y3(4)
Y6(4)
Y4(4)
Y5(4)
CVBS
Low Impedance ow Impedance circ
Hight ImpedanceHight Impedance ci
Related PCB is match to SCH,but noCOAXOUT OUTOUT
YUV High Impendance
Close to RCA connector
CTP36
D514
DIODE SMD BAV99
1 2
3
FB582 FB/0805
R1355150R
C60710uF/10V
0805-C
R1347 75 1%
R535100_1%
D522DIODE SMD BAV99
1 2
3
0.1UFC609
16V 10%
1 2
CTP39CB100933pF/NC
R1354150R
C51010pF
D520DIODE SMD BAV99
1 2
3
CTP38
Q212BT3904
0.1UFC610
16V 10%
1 2
R501 100R
D521DIODE SMD BAV99
1 2
3
R126275 1%
+
CE60547uF/16v
R536
91_1%
R1345 75 1%
C501100pF
CB5000.1uF
C50910pF
R140333R/0
R1263NC/0
R13982.4K
CB100633PF
U913
FMS6363CS
IN11
IN22
IN33
VCC4 GND 5
OUT3 6
OUT2 7
OUT1 8
R1356150R
R13991.2K
CB9680.1uF
FB581 FB/0805
R13507.5MR
L8521.2uH
R
WW
R
P505
RCA2X2
RCA-307
1
234
5
CB10020.1uF
CB33P
R13497.5MR
L871FB500R
0.1UFC608
16V 10%
1 2 R1343 75 1%
CTP40
R13487.5MR
R500
100R
Main Board Electric Diagram: VIDEO OUTPUT & SPDIF OUTPUT
7-10
7/26/2019 Philips Bdp 3000 Sm (2)
33/43
A
A
B
B
C
C
D
D
4
3
2
1
AMUTE
MUTE1MUTE2
FL
FR
-12VB
MUTE_L
MUTE_R
4385_CSSCL
AOSDATA4
FL-
FL+
FR-FR+
AOMCLKAOBCK
SDA
+12VB
-12VB
+12VB
-12VB
FL-
+12VB
DAC_RST#
FL+
FR-
FR+
MUTE_L
MUTE_R
MUTE1
MUTE2
MUTE
AOLRCK
MUTE_L
MUTE_R
-12V
+5VIN
+5VIN
+12V
-12V
-12V
+12V
+CE60410uF/50V
R1402100K
R1385470R
Q221
BT3904R13925.1K 1%
R1365
4.7K
D5231N4148
C612
0.1uF
+
CE59910uF/16v
+
-
U916A
NE5532 OPA
3
21
8
4
+CE600100uF/16V
R13894.7K 1%
Q215
BT3904
R1360
4.7K
C623470pF
R1371470R
Q217
BT3904
R13825.1K 1%
R1380100K
Q220
BT3904
R1358 100R
R1368
22K
R1378 470R
C6254.7uF
R13814.7K 1%
C6210.1uF
C617470pF
Q216
BT3904
R1395470R
R1375470R
R1388100K
U915
AK4385ET
DZFR 15
DZFL 16
PDN5
BICK2
MCLK1
VDD 14
VSS 13SDTI13
CSN6
CDTI8 CCLK7 AOUTR+ 10
AOUTL+ 12
AOUTR- 9
AOUTL- 11
LRCK4R1362 330R
C616
0.1uF
R13675.1K 1%
L859 1 00uH
C614 560pF
R1379100R
R1376470R
R13745.1K 1%
R1391100K
C6110.1uF
R13633.3K
C6180.1uF
R1369470R
U91478L05
OUT 1
GND
2
IN3
R13724.7K 1%
C6223300pF
+CE601100uF/16V
R1383100K
R137710K
Q2199012
R139310K
Q2139012
+CE597220U/16V
R1373470R
+
CE60210uF/16v
R1401100K
+
-
U916B
NE5532 OPA
5
67
8
4
R13644.7K
C6130.01uF
CT
C6190.1uF
R1359 100R
R1394470R
R1386470R
R1370470R
D5241N4148
C620560pF
R1387470R
R1384
1K
R1361
10K
R1390470R
Q2149012
R13664.7K 1%
+CE603220uF/10V
C6153300pF
Q2189012
R13961K
Main Board Electric Diagram: AUDIO OUTPUT AK4385
7-11
7/26/2019 Philips Bdp 3000 Sm (2)
34/43
5
5
4
4
3
3
2
2
D
C
B
A
LINKLED
ETCRS
ETCOL
PWFBOUT1
VDD_CORE
FULLDUPLEXLEDACTIVITYLEDLINKLEDSPEED100LED
ETTXCLK
ETCOL
ETRXCLK
ETRXCLK
ETTXER
ETTXD3
SPEED100LED
VDD_CORE
LINKLED
FULLDUPLEXLED
ACTIVITYLED
ETMDC
ETRXD3ETRXD2ETRXD1
ETRXDVETRXD0
ETRXCLKETRXER
ETTXCLK
LAN
_RESET#
ETTXENETTXD0
ETTXD2ETTXD1
ACTIVITYLED
RD+
TPRX+
ETMDIO
TPTX+
TPTX-RD-
PWFBOUT2
TD+
L3V3IO
L3V3IO
LAN3V3L3V3IO
L3V3IO
LAN3V3
3.3V L3V3IOLAN3V3
LAN3V3L3V3IO
LAN3V3
L3V3IO
ETCRS(6)
ETTXER(6)
ETCOL(6)
ETTXD2(6)
ETTXEN(6)
ETTXD1(6)
ETTXD3(6)
ETTXD0(6)
ETMDIO(6)
ETRXD3(6)
ETMDC(6)
ETRXD2(6)
ETRXCLK(6)
ETRXD0(6)ETRXDV(6)
ETRXD1(6)
ETTXCLK(6)
ETRXER(6)
RESET#(1,4,5)
R131449.9 R0603-R
R1297 100R
C595
0.22uF/50V
CB986 NC/0.1uF
R1305 100R
R1330 0R
R129
1
NC/10
K
CB9780.1uF
U912LAN8700(i)
QFN36/6/0.5
TX_CLK22
TX_EN6
TXD023
TXD124
TXD226
TXD327
COL/MII/CRS_DV36
CRS/PHYAD43
nINT/TX_ER/TXD41
nRST5
RXD3/nINTSEL15
RXD1/MODE117
EXRES1
34
MDIO4
MDC2
RXD2/MODE216
TXN 28
VDD33A1
30
TXP 29
SPEED100/PHYAD0 9
VSS/FLAG
37
RXP 32
RXN 31
LINK/PHYAD1 10
ACTIVITY/PHYAD2 11
FDUPLEX/PHYAD3 12
VDD33
7
VDD_CORE 8
CLKIN/XTAL114
XTAL213
VDDIO
25
RXD0/MODE018
RX_DV19
RX_CLK/REGOFF20
RX_ER/RXD421
VDD33A2
33
VDD33A3
35
R1310100R
R1316
NC/10K
R132912.4K 1%
R1298 100R
CB989NC/0.1uF0603-C
R13261M
R 1296 0R
CB9750.1uF CB979
0.1uF
R1325 10K
R1289
49.9 1/16W 1%0603-R
R1311100R
R1301 100R
R1317
NC/10K
R1
292
NC/
10K
Y301
25.0000MHz
CB9800.1uF
CB983NC/10pF/50V
6
7
3
45
8
1
2
109
1211
FB578FB/0603
R1288
49.9 1/16W 1%0603-R
R1313 100R
CB9760.1uF
CB987 NC/0.1uF
R1303 100R
R129410R0805-R
CB984NC/10pF/50V
CB9770.1uF
CB981NC/10pF/50V
FB579FB/0603
R 1300 0R
R1327
NC/5.1KC598
33pF
R1335 220R
L860
TDK ACM2012H-900-2P/0
1
32
4
R1312
49.9R0603-R
R1319
NC/10K
R1307100R
R1293
1.5K 1%
+ CE591220uF/10v
R1328
NC
CB982NC/10pF/50V
C5974.7uF
R1318
NC/10K
L861
TDK ACM2012H-900-2P/0
2
41
3
RN108330x4
1 23 45 67 8
CB985NC/0.1uF
R1315
NC/10K
R1295 100R
R1334 220R
R1299 NC/ 0R
R1324 10K
R1306 100R
+CE590220uF/10v
R1290NC/10K
CB9880.1uF
C599
33pF
Main Board Electric Diagram: LAN 8700
7-12
7/26/2019 Philips Bdp 3000 Sm (2)
35/43
Front Board Print-layout (Top and Bottom side):
7-13
7/26/2019 Philips Bdp 3000 Sm (2)
36/43
Power Board Print-layout (Bottom side): Switch
7-14 7-1
7/26/2019 Philips Bdp 3000 Sm (2)
37/43
Main Board Print-layout (Top side):
7-15
7/26/2019 Philips Bdp 3000 Sm (2)
38/43
Main Board Print-layout (Bottom side):
7-16
7/26/2019 Philips Bdp 3000 Sm (2)
39/43
8-1
Exploded View for BDP3000:
It's a general mechanical exploded view for BDP3000, pls refer to the model set for detailed information.
ASSY 1 includes components:2.3.4.5.22
7/26/2019 Philips Bdp 3000 Sm (2)
40/43
8-2A
PARTS LIST: BDP3000/12
No. 12NC No. Description Q'ty
1 996510025851 CD DOOR 1
11 996510025845 ASSY-PW BOARD 114 996510025835 BACK PLATE 1
15 996510025839 ASSY-MAIN BOARD 1
18 996510025849 TOP COVER 1
20 996510025832 BLU-RAY DISC MODULE 1
21 996510025842 ASSY-SW BOARD 1
6 996510025843 ASSY-FE BOARD 1
9 996510025846 BOTTOM PLATE 1
AVCABLE 996500020384 AUDIO/VIDEO CABLE 1 1
Assy1 996510025838 ASSY-FRONT PANEL 1
CN504 996510025841 8P CABLE SAN-8P P2.0 L130 1
J303 996510025852 4PIN CABLE TJC3-4Y*2 1
JP1 996510025834 CABLE 5P 130MM FH-JC20 1
JP2 996510025847 CABLE 6P 120MM FH-JC20 1JP3 996510025844 4P CABLE 180MM 1
PAD 996510025837 SPONGE PAD 4
POWERCORD 996510001537 POWER CORD 1
RC 996510025848 REMOTE CONTROL 1
SATALINE 996510025836 HD TRANSMISSION LINE 1
SHIELDBOARD 996510025833 SHIELD BOARD 1
Screws List
No 12NC No. Description Q'ty
8 S/T SCREW B 2.6 X 6 BF 6
10 TRIANGLE M/C SCREW B 3 X 6 6
12
S/T SCREW B 3 X 8 BF 4
13 M/C SCREW 3 X 6 B 1
16 S/T SCREW B3 X 6 BF 7
17 S/T SCREW B3 X 6 BF 2
19 S/T SCREW B 3 X 7 BF 4
SAFETY PRECAUTION
The parts identified by mark are critical for safety. Replace only with part
number specified.
The mounting position of replacement is to be identical with originals. The
substitute replacement parts which do not have the sam
7/26/2019 Philips Bdp 3000 Sm (2)
41/43
8-2B
PARTS LIST: BDP3000/05
No. 12NC No. Description Q'ty
11 996510025845 ASSY-PW BOARD 1
14 996510025835 BACK PLATE 1
15 996510025839 ASSY-MAIN BOARD 1
18 996510026145 TOP COVER 1
20 996510025832 BLU-RAY DISC MODULE 1
21 996510025842 ASSY-SW BOARD 1
6 996510025843 ASSY-FE BOARD 1
9 996510025846 BOTTOM PLATE 1
AVCABLE 996500020384 AUDIO/VIDEO CABLE 1.5M 1
Assy1 996510025838 ASSY-FRONT PANEL 1
CN504 996510025841 8P CABLE SAN-8P P2.0 L130 1
DBOX 996510026146 DISPLAY BOX 1
J303 996510025836 HD TRANSMISSION LINE 1
JP1 996510025834 CABLE 5P 130MM FH-JC20 1
JP2 996510025847 CABLE 6P 120MM FH-JC20 1
JP3 996510025844 4P CABLE 180MM 1
PAD 996510025837 SPONGE PAD 4
POWERCORD 996510026331 POWER CORD 1
PWRSKT 996510026144 POWER SUPPLY SOCKET 1
RC 996510025848 REMOTE CONTROL 1
TWISTTIE 996510026143 TWIST TIE NY66 1
Screws List
No 12NC No. Description Q'ty
8 S/T SCREW B 2.6 X 6 BF 6
10
TRIANGLE M/C SCREW B 3 X 6 612 S/T SCREW B 3 X 8 BF 4
13 M/C SCREW 3 X 6 B 1
16 S/T SCREW B3 X 6 BF 7
17 S/T SCREW B3 X 6 BF 2
19 S/T SCREW B 3 X 7 BF 4
SAFETY PRECAUTION
The parts identified by mark are critical for safety. Replace only with part number
specified.
The mounting position of replacement is to be identical with originals. The substitute
replacement parts which do not have the sam
7/26/2019 Philips Bdp 3000 Sm (2)
42/43
8-2C
PARTS LIST: BDP3000/51
No. 12NC No. Description Q'ty
1 996510025851 CD DOOR 1
11 996510025845 ASSY-PW BOARD 114 996510025835 BACK PLATE 1
15 996510025839 ASSY-MAIN BOARD 1
18 996510025849 TOP COVER 1
20 996510025832 BLU-RAY DISC MODULE 1
21 996510025842 ASSY-SW BOARD 1
6 996510025843 ASSY-FE BOARD 1
9 996510025846 BOTTOM PLATE 1
AVCABLE 996500020384 AUDIO/VIDEO CABLE 1 1
Assy1 996510025838 ASSY-FRONT PANEL 1
CN504 996510025841 8P CABLE SAN-8P P2.0 L130 1
J303 996510025852 4PIN CABLE TJC3-4Y*2 1
JP1 996510025834 CABLE 5P 130MM FH-JC20 1
JP2 996510025847 CABLE 6P 120MM FH-JC20 1JP3 996510025844 4P CABLE 180MM 1
PAD 996510025837 SPONGE PAD 4
POWERCORD 996510001537 POWER CORD 1
RC 996510025848 REMOTE CONTROL 1
SATALINE 996510025836 HD TRANSMISSION LINE 1
SHIELDBOARD 996510025833 SHIELD BOARD 1
Screws List
No 12NC No. Description Q'ty
8 S/T SCREW B 2.6 X 6 BF 6
10 TRIANGLE M/C SCREW B 3 X 6 6
12
S/T SCREW B 3 X 8 BF 4
13 M/C SCREW 3 X 6 B 1
16 S/T SCREW B3 X 6 BF 7
17 S/T SCREW B3 X 6 BF 2
19 S/T SCREW B 3 X 7 BF 4
SAFETY PRECAUTION
The parts identified by mark are critical for safety. Replace only with part
number specified.
The mounting position of replacement is to be identical with originals. The
substitute replacement parts which do not have the sam
7/26/2019 Philips Bdp 3000 Sm (2)
43/43
REVISION LIST
Version 1.0
* Initial release for BDP3000/12 & BDP3000/05
9-1
Version 1.1
* Adding BDP3000/51
Version 1.2
* Correction:
20 996510025832 BLU-RAY DISC MODULE (was ASA BOARD P021-C)