Page 1 of 48 Philippine Accreditation Bureau SCOPE OF ACCREDITATION Appendix No. APCB-1015-001 (Table 3) Rev. 2. SGS Gulf Limited – Regional Operating Headquarters (ROHQ) 20 th Floor, Citibank Tower 8741 Paseo de Roxas Makati City has been accredited to PNS ISO/IEC 17065:2013 – Conformity assessment – Requirements for bodies certifying products, processes and services to provide product certification for the following scopes: No. Product Description Test Standard Number and Description Chemical Products Conformity assessment of goods to be exported in to Algeria, Burundi, Botswana, Ethiopia, Kenya, Mongolia, Niger, Nigeria, Qatar, Rwanda, Kingdom of Saudi Arabia, Tanzania, Uganda SGS Scheme Document Chemical Product Safety (Batch Certification) –System Type 1a SGS Scheme Document Chemical Product Safety (Product Registration –System Type 3 SGS Scheme Document Chemical Product Safety (Product Licensing) –System Type 5 1. Chemicals for industrial and domestic purposes EAS 31:2013 - Laundry soap specification EAS 121:1999 – Water for lead acid batteries – Specification EAS 122:1999 – Sulfuric acid – Specification EAS 123:1999 - Distilled water — Specification EAS 127-1:2013 – Synthetic detergent powders – Specification – Part 1: Household hand use EAS 127-2:2014 - Synthetic detergent powders – Specification - Part 2: Machine wash EAS 149:2000 – Carbon dioxide for beverage industry – Specification EAS 290-2:2002 – Polishes – Specification – Part 2: Floor polish solvent type (liquid and paste) EAS 290-3:2002 – Polishes – Specification – Part 3: Floor polish water emulsion buffable type EAS 294:2001 - Scouring powder – Specification EAS 295:2002 - Sodium hypochlorite solutions for domestic use – Specification EAS 296:2011 - Liquid household hand dishwashing detergent – Specification EAS 326:2002 - Copper/chromium/arsenic composition for the preservation of timber – Specification EAS 345:2004 – Toluene - Specification EAS 361:2004 – Carbaryl dusting powders – Specification EAS 383:2013 – Synthetic organic liquid detergent for household use – Specification EAS 462:2007 – Shoe polish wax solvent paste type - Specification EAS 787:2013 – Synthetic industrial detergent powder – Specification EAS 788:2013 – Synthetic detergent paste – Specification
48
Embed
Phi lipp in e Accredi ta tio n Bu reau 3... · Page 3 of 48 Phi lipp in e Accredi ta tio n Bu reau No. Product Description Test Standard Number and Description 1. Chemicals for industrial
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1 of 48
Philippine Accreditation Bureau
SCOPE OF ACCREDITATION
Appendix No. APCB-1015-001 (Table 3) Rev. 2.
SGS Gulf Limited – Regional Operating Headquarters (ROHQ) 20th Floor, Citibank Tower 8741 Paseo de Roxas Makati City
has been accredited to PNS ISO/IEC 17065:2013 – Conformity assessment – Requirements for bodies certifying products, processes and services to provide product certification for the following scopes:
No. Product Description Test Standard Number and Description
Chemical Products Conformity assessment of goods to be exported in to Algeria, Burundi, Botswana, Ethiopia, Kenya, Mongolia, Niger, Nigeria, Qatar, Rwanda, Kingdom of Saudi Arabia, Tanzania, Uganda SGS Scheme Document Chemical Product Safety (Batch Certification) –System Type 1a SGS Scheme Document Chemical Product Safety (Product Registration –System Type 3 SGS Scheme Document Chemical Product Safety (Product Licensing) –System Type 5
1.
Chemicals for industrial and domestic purposes
EAS 31:2013 - Laundry soap specification
EAS 121:1999 – Water for lead acid batteries – Specification
EAS 122:1999 – Sulfuric acid – Specification
EAS 123:1999 - Distilled water — Specification
EAS 127-1:2013 – Synthetic detergent powders – Specification – Part 1: Household hand use
EAS 127-2:2014 - Synthetic detergent powders – Specification - Part 2: Machine wash
EAS 149:2000 – Carbon dioxide for beverage industry – Specification
EAS 290-2:2002 – Polishes – Specification – Part 2: Floor polish solvent type (liquid and paste)
EAS 290-3:2002 – Polishes – Specification – Part 3: Floor polish water emulsion buffable type
EAS 294:2001 - Scouring powder – Specification
EAS 295:2002 - Sodium hypochlorite solutions for domestic use – Specification
EAS 296:2011 - Liquid household hand dishwashing detergent – Specification
EAS 326:2002 - Copper/chromium/arsenic composition for the preservation of timber – Specification
EAS 345:2004 – Toluene - Specification
EAS 361:2004 – Carbaryl dusting powders – Specification
EAS 383:2013 – Synthetic organic liquid detergent for household use – Specification
EAS 462:2007 – Shoe polish wax solvent paste type - Specification
EAS 787:2013 – Synthetic industrial detergent powder – Specification
EAS 788:2013 – Synthetic detergent paste – Specification
Page 2 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1.
Chemicals for industrial and domestic purposes
EAS 789:2013 – Instant hand sanitizers – Specification
EAS 791:2013 – Oven cleaner and grease remover – Specification
EAS 792:2013 – Carpet and upholstery shampoo – Specification
EAS 793-1:2013 – Toilet cleansers – Specification – Part 1: Acidic liquid toilet cleansers
EAS 815:2014 – Soap noodles - Specification
EAS 816-1:2014 – Synthetic liquid laundry detergents – Specification – Part 1: Hand wash
EAS 816-2:2014 – Synthetic liquid laundry detergents – Specification – Part 2: Machine wash
EAS 817:2014 – Stain remover for tableware - Specification
KS 85:2007 (confirmed 2013) – Chemicals used for treatment of water intended for human consumption – Aluminium sulphate – Specification
KS 87:2012 - Hydrochloric acid- Specification
KS 155:2015 – Sodium carbonate for industrial use - Specification
KS 156:2014 - Caustic soda, analytical and technical – Specification
KS 221:1983 (confirmed 2016) – Specification for lime for chemical industry
KS 242:1980 (confirmed 2010) – Specification for sulphuric acid for use in lead-acid batteries
KS 315:1998 (confirmed 1999) - Specification for motor vehicle brake fluids
KS 807-2:2010 - Polishes - Specification - Part 2: Floor polish solvent type (Liquid and Paste)
KS 807-3:1996 (confirmed 2015) - Specification for polishes - Part 3: Floor polish water emulsion buffable type
KS 807-4:2010 - Polishes - Specification - Part 4: Floor polish, water emulsion self-shining type
KS 807-5:1997 - Specification for polishes - Part 5: Floor polish pigmented paste type
KS 807-6:1996 - Specification for polishes - Part 6: Automobile polish, wax solvent paste type
KS 807-7:1997 - Specification for polishes - Part 7: Wooden furniture polish paste
KS 807-8:1996 - Specification for polishes - Part 8: Automobile polish - liquid
KS 809-1:1988 (confirmed 2017) - Specification for toilet cleansers - Part 1: Powder toilet bowl cleanser
KS 809-3:2013 - Specification for toilet cleansers - Part 3: Alkaline and neutral liquids toilet cleansers
KS 914:2013 - Acetone for industrial use – Specification
KS 915:1990 (confirmed 2007) - Specification for anyhdrous lanolin for cosmetic industry
Page 3 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1.
Chemicals for industrial and domestic purposes
KS 927:2016 - Specification for disinfecting general purpose detergents
KS 929:2016 - Chemical disinfectants and antiseptics- Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas -Test method and requirements
KS 1184:2011 - Specification for isopropyl alcohol (propan-2-ol) for industrial use
KS 1275:1995 (confirmed 2017) - Specification for distempers
KS 1290-1:1999 (confirmed 2013) - Specification for bleaching agents - Part 1: Sodium hypochlorite solutions
KS 1290-2:1998 (confirmed 2010) - Specification for bleaching agents - Part 2: Sodium hypochlorite solution for water treatment
KS 1290-3:1998 (confirmed 2010) - Specification for bleaching agents - Part 3: Chlorinated lime bleaching powder for water treatment KS 1290-4:2007 (confirmed 2013) - Chemical used for treatment of water intended for human consumption - Part 4: Calcium hypochlorite
KS 1291:2013 - Specification for butyl acetate for industrial use
KS 1292:2015 - Specification for ethyl acetate for industrial use
KS 1293:2013 - Isobutyl acetate (methyl propyl acetate) for industrial use – Specification
KS 1294:2015 – Specification for isopropyl acetate for industrial use
KS 1295:1996 (confirmed 2013) - Diacetone alcohol for industrial use – Specification
KS 1296:2015 - Specification for ethyl glycol (2-ethoxyethanol) for industrial use
KS 1332-1:1996 (confirmed 2011) – Specification for photographic chemical – Part 1: Potassium bromide
KS 1332-4:1996 (confirmed 2011) – Specification for photographic chemical – Part 4: Photographic grade sodium bisulphate
KS 1332-6:1996 (confirmed 2011) – Specification for photographic chemical – Part 6: Photographic grade hydroquinone
KS 1332-7:1996 (confirmed 2011) – Specification for photographic chemical – Part 7; photographic potassium metabisulphite
KS 1406-1:1997 - Specification for carbaryl - Part 1: Technical grade
KS 1406-3:1997 (confirmed 2014) - Specification for carbaryl – Part 3: Water dispersible powders
KS 1407-1:1998 – (confirmed 2014) Specification for chlorpyrifos - Part 1: Technical grade
KS 1407-2:1998 (confirmed 2014) - Specification for chlorpyrifos emulsifiable concentrates
KS 1408-1:1998 (confirmed 2014) - Specification for technical grade - Part 1: Dimethoate
KS 1408-2:1998 (confirmed 2014) - Specification for Dimethoate emulsifiable concentrate
Page 4 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1.
Chemicals for industrial and domestic purposes
KS 1410-1:1998 (confirmed 2014) - Specification for Malathion - Part 1: Technical grade
KS 1410-2:1998 (confirmed 2014) - Specification for Malathion Emulsifiable Concentrates
KS 1410-3:1998 (confirmed 2014) - Specification for Malathion Dusting Powder
KS 1411-1:1998 (confirmed 2014) - Specification for Diazinon, Technical Grade
KS 1411-2:1998 (confirmed 2014) - Specification for Diazinon Emulsifiable Concentrates
KS 1443:1997 (confirmed 2017) - Specification for washing bars
KS 1455-1:1999 (confirmed 2017) - Specification for glass cleaner - Part 1: Liquid glass cleaner
KS 1918:2005 (confirmed 2017) – Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides – Specification
KS 1919:2005 (confirmed 2017) - Chemicals used for treatment of water intended for human consumption – Poly (diallyldimethylammonium chloride) \ {polyDADMAC} - Specification
KS 1920:2005 (confirmed 2017) – Chemicals used for treatment of water intended for human consumption – Cationic polyacrylamides – Specification
KS 1924:2007 (confirmed 2013) - Chemicals used for treatment of water intended for human consumption – Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulphate – Specification
KS 2502:2013 - Liquid oxygen based bleach for domestic use- Specification
KS 2518: 2014 - Buffer solutions – Specification
KS 2535:2014 – Melamine-formaldehyde resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water – Specification
KS 2564:2014 – Chemicals used for treatment of water intended for human consumption – Chemicals for emergency use – Trichloroisocyanuric acid – Specification
KS 2565:2014 – Chemicals used for treatment of swimming pool water – Trichloroisocyanuric acid - Specification
KS 2587: 2015 Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate
KS 2588: 2015 - Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous
SASO 993:1998 - Carbon dioxide used for medical purposes
SASO 995:1998 - Ethylene Glycol Concentrate and its Engine Coolants.
SASO 1052:1998 - Roll of glass fibre felt coated with bitumen.
SASO 1054:2009 - Sodium hypochlorite solution
SASO 1057:2009 - Alkali drain cleaner
SASO 1184:1998 - Phenolic disinfectant fluids
SASO 1195:1998 - liquid class cleaner.
SASO 1198:1998 - Ethylene for industrial purposes
SASO 1200:1998 - Methanol for industrial use
SASO 1202:1998 - Toluene For Industrial And Commercial Purposes.
SASO 1326:1998 - Aerosol air freshener
SASO 1382:1998 - Sodium bicarbonate
SASO 1385:1998 - Black and white liquid disinfectants
SASO 1403:1998- Formaldehyde for industrial purposes
SASO 1405:1998 - Refined Phenol For Industrial Purposes
SASO 1506:1999 - Propylene industrial purposes
SASO 1508:1999 - Nitrous oxide gas used for medical purposes
SASO 1510:1999 - Sodium carbonate (soda ash) for industrial purposes.
SASO 1722:2000 - Alkaline and neutral grades of glass sodium silicate and their solutions.
SASO 1724:2000 - Phosphoric acid for industrial use
Page 11 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
SASO 1754:2000 - Aluminium oxide used for industrial purposes - Aluminium oxide powder for use as an insulating coating or as an ingredient of ceramic mixtures for components of electronic devices
SASO 1786:2000 - Crude, Chemically pure and technical glycerine.
SASO 1949:2001 - Emulsified asphalt.
SASO 1956:2001 - Shoe polish.
SASO 2065:2009 - Synthetic Detergents for Kitchen
SASO 2067:2002 - Powdered Hand Cleaner (soap with borax)
SASO 2068:2002 - Solvent cement used for joining unplasticized pvc pipe and fitting
SASO 2106:2002 – sulphur
SASO 2160:2003 - Asphalt - base emulsion for use as protective coatings for metal
SASO 2270:2004 - Acrylic, polyester, and mixed acrylic- polyester resin based solid surface material - sheet products
SASO GSO 2238:2012 - Liquid detergents for dishwashing
SASO GSO ASTM C494:2015 Standard Specification for Chemical Admixtures for Concrete
SASO ISO 5280:1998 - Xylene for industrial use.
Page 12 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
NIS 04:2010 - Specification for toilet soap
NIS 05: 2010 - Specification for Hard Laundry Soap
NIS 48:1974 - Specification for enamelware for household use
NIS 119: 1981 - Specification for Distilled Water Suitable for Lead Acid Batteries used in Motorised Vehicle
NIS 131:1980 - Specification for water for laboratory use
NIS 137:1982 - Standard for sodium hydroxide (Technical grudges)
NIS 150: 1982 - Specification for Bleaching Solution for Domestic use
NIS 241: 1988 - Standard Specifications for Aluminum Sulphate
NIS 272:1989 - Specification for industrial benzene
NIS 286:1992 – Specification for mosquito coils
NIS 288: 1992 - Specifications for Concentrated Sulphuric Acid
NIS 376:2013 - Standard for Synthetic Detergent Powder for Laundry Purposes
NIS 380:1997 - Specification for sodium silicate
NIS 425: 2000 - Specification for Household Aerosol Insecticides & Performance Requirement for Filled & Unfilled Aerosol Insecticides Dispenser
NIS 517: 2006 - Standard for Laundry Bar
NIS 519: 2013 - Standard for Liquid Detergent for Household Hand Dish Washing
NIS 521: 2006 - Standard for Ethanol (Industrial Grade)
NIS 568:2008 - Standard for Quaternary Compounds (QACs) based Aromatic disinfectants fluids
NIS 569:2008 - Standard for aromatic disinfectant Fluids
NIS 722:2008 - Standard for black and white disinfectant fluid
ASTM C1031-11 (2016) - Standard Specification for Nuclear-Grade Aluminum Oxide Powder
ASTM C1184-14 – Standard specification for structural silicone sealants
ASTM C494/C494M-16 Standard Specification for Chemical Admixtures for Concrete
ASTM D98-15 – Standard specification for calcium chloride
ASTM D304-11 – Standard specification for butyl alcohol (Butanol)
ASTM D329-07(2013) – Standard specification for acetone 1,2
ASTM D330-07(2013) – Standard specification for 2-butoxyethanol 1,2
ASTM D632-12 – Standard specification for sodium chloride
ASTM D740-11 – Standard specification for methyl ethyl ketone 1,2
ASTM D770-11 – Standard specification for isopropyl alcohol 1,2
ASTM D928-03(2017) – Standard specification for sodium bicarbonate
ASTM D1152-06(2012) – Standard specification for methanol (methyl alcohol)
ASTM D1153-12 – Standard specification for methyl isobutyl ketone 1,2
ASTM D1786-16 – Standard specification for toluene diisocyanate
ASTM D1836-07(2013) – Standard specification for commercial hexanes
ASTM D2190-07(2013) – Standard specification for vinyl acetate
ASTM D2378-07(2012) – Standard specification for formaldehyde 50% grade uninhibited and 37% grade inhibited and uninhibited
ASTM D2827-13 – Standard specification for styrene monomer
ASTM D3130-11 – Standard specification for n-propyl acetate (96% grade)
Page 13 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
ASTM D3620-04(2009) - Standard Specification for Glacial Acetic Acid
ASTM D3622-11 – Standard specification for 1-propanol (n-propyl alcohol)
ASTM D4078-02(2015) – Standard specification for water emulsion floor polish
ASTM D4081-16 – Standard specification for drycleaning-grade perchloroethylene
ASTM D4416-09 – Standard specification for acrylic acid
ASTM D4614-11 – Standard specification for ethyl acetate (all grades)
ASTM D4615-12 – Standard specification for n-butyl acetate (all grades)
ASTM D4652-05(2015) – Standard specification for silicone fluid used for electrical insulation
ASTM D4701-00(2015) – Standard specification for technical grade methylene chloride
ASTM D4835-08(2012) – Standard specification for propylene glycol monomethyl ether acetate
ASTM D4837-07(2012) – Standard specification for propylene glycol monomethyl ether
ASTM D5164-02(2011) – Standard specification for propylene glycol and dipropylene glycol
ASTM D5211-16 - Standard Specification for Xylenes for p-Xylene Feedstock
ASTM D5237-14 – Standard guide for evaluating fabric softeners
ASTM D5396-04(2015) – Standard specification for reclaimed perchloroethylene 1,2
ASTM D5871-16 – Standard specification for benzene for cyclohexane feedstock
ASTM D7124-16 - Standard Specification for Benzene for Use with Zeolite Based Catalysts
ASTM E1220-16 – Standard specification for liquid chlorine
ASTM E1229-16 – Standard specification for calcium hypochlorite
ISO 418:2001 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for anhydrous sodium sulphite
ISO 420:1994 (confirmed in 2016)- Photography -- Processing chemicals -- Specifications for potassium bromide
ISO 422:1994 (confirmed in 2016)- Photography -- Processing chemicals -- Specifications for p-methyl aminophenol sulphate
ISO 423:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for hydroquinone
ISO 424:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate
ISO 817:2014 - Refrigerants -- Designation and safety classification
ISO 2456:1986 (confirmed in 2017) - Surface active agents -- Water used as a solvent for tests -- Specification and test methods
ISO 3298:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for glacial acetic acid
ISO 3299:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for 1-phenyl-3-pyrazolidinone
ISO 3617:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for sodium hydroxide
ISO 3618:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for benzotriazole
ISO 3619:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for ammonium thiosulfate solution
ISO 3620:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for aluminium potassium sulphate
Page 14 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
1. Chemicals for industrial and domestic purposes
ISO 3621:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for sodium tetraborate decahydrate
ISO 3622:1996 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for ammonium thiocyanate
ISO 3623:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for anhydrous potassium carbonate
ISO 3624:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for potassium ferricyanide
ISO 3625:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for potassium hydroxide
ISO 3626:1996 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for potassium thiocyanate
ISO 3627:2001 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for anhydrous sodium metabisulfite
ISO 3628:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for boric acid, granular
ISO 3629:2000 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for potassium metabisulfite
ISO 3943:1993 (confirmed in 2015) - Photography -- Processing chemicals -- Specifications for anhydrous sodium acetate
ISO 3696:1987 (confirmed in 2011) - Water for analytical laboratory use -- Specification and test methods
ISO 5272:1979 (confirmed in 2012) - Toluene for industrial use – Specifications
ISO 5280:1979 (confirmed in 2012) - Xylene for industrial use – Specification
ISO 5990:2000 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for potassium sulfite, 650 g/l solution
ISO 6353-2:1983 (confirmed in 2012) - Reagents for chemical analysis -- Part 2: Specifications -- First series
ISO 6353-3:1987 (confirmed in 2012) - Reagents for chemical analysis -- Part 3: Specifications -- Second series
ISO 10636:1994 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate
ISO 17531:2002 (confirmed in 2016) - Photography -- Processing chemicals -- Specifications for 4-(N-Ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate
ISO 17584:2005 (confirmed in 2014) - Refrigerant properties
EC Regulation No.1907:2006 - EU Regulation on Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)
EU Directive 67/548/EEC Classification, Labelling and Risk Assessment of Chemicals
ES 3642:2005 – Labelling of chemical products
ES 6910:2015 – Labelling of detergents and cleaning products
Page 15 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
2. Essential Oils
EAS 64:2000 - Groundnut (peanut) oil for cosmetic industry – Specification
EAS 65: 2000 - Coconut oil for cosmetic industry — Specification
EAS 86:2000 - Sesame (simsim) oil for cosmetic industry – Specification
KS 796:1992 (confirmed 2017) - Specification for mineral oil for cosmetics industry
KS 797:1989 (confirmed 2016) – Specification for sesame (simsim) oil for cosmetic industry
KS 798:1989 (confirmed 2016) – Specification for groundnut (peanut) oil for cosmetic industry
KS 799:1989 (confirmed 2016) - Specification for castor oil for cosmetic industry
KS 800:1989 (confirmed 2016) - Specification for coconut oil for cosmetic industry
KS 1765:2003 (confirmed 2011) - Specification for avocado oil for cosmetic industry
KS EAS 64:2000 (confirmed 2017) - Groundnut (peanut) oil for cosmetic industry - Specification
KS EAS 86:2000 (confirmed 2016) - Sesame (simsim) oil for cosmetic industry - Specification
KS ISO 590:1981 (confirmed 2014) – Oils of Brazilian sassafras
KS ISO 770:1980 (confirmed 2017) - Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.)
KS ISO 855:1981 (confirmed 2014) - Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression
KS ISO 856:1981 (confirmed 2014) - Oil of peppermint (Mentha x piperita L.)
KS ISO 1342:1988 (confirmed 2014) - Essential oil of rosemary (Rosmarinus officinalis L.)
KS ISO 3043:1975 (confirmed 2014) – Oil of pimento berry
KS ISO 3044:1997 (confirmed 2014) - Oil of eucalyptus citriodora Hook.
KS ISO 3053:2004 (confirmed 2015) - Oil of grapefruit (Citrus x paradisi Macfad.), obtained by expression
KS ISO 3054:1987 (confirmed 2014) - Oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula latifolia Medikus), French type
KS ISO 3061:2008 (confirmed 2015) - Oil of black pepper (Piper nigrum L.)
KS ISO 3063:2004 (confirmed 2015) - Oil of ylang-ylang (Cananga odorata (Lam.) Hook. f. et Thomson forma genuina)
KS ISO 3064:1977 (confirmed 2014) - Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.)
KS ISO 3065:1974 (confirmed 2014) - Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineol
KS ISO 3525:1979 - Oil of amyris (Amyris balsamifera L.)
KS ISO 3475:1975 (confirmed 2015) - Oil of aniseed (Pimpinella anisum L.)
KS ISO 3523:1976 (confirmed 2017) - Oil of cananga (Cananga odorata (Lam.) Hook. f. et Thomson, forma macrophylla)
KS ISO 3524:1977 (confirmed 2017) - Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume)
KS ISO 3033-1:2005 (confirmed 2015) - Oil of spearmint -- Part 1: Native type (Mentha spicata L.) KS ISO 3061:2008 (confirmed 2015) - Oil of black pepper (Piper nigrum L.) KS ISO 3063:2004 (confirmed 2015) - Oil of ylang-ylang (Cananga odorata (Lam.) Hook. f. et Thomson forma genuina)
Page 16 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
2. Essential Oils
KS ISO 3064:1977 (confirmed 2014) - Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.)
KS ISO 3760:1979 (confirmed 2017)- Oil of celery seed (Apium graveolens L.)
KS ISO 3848:2001 (confirmed 2017) - Oil of citronella, Java type
KS ISO 3849:1981 (confirmed 2017) - Oil of citronella, Sri Lankan type (Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.)
KS ISO 3140:2005 (confirmed 2015) - Oil of sweet orange [Citrus sinensis (L.) Osbeck], obtained by physical extraction of the peel
KS ISO 3141:1997 (confirmed 2017) - Oil of clove leaves [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
KS ISO 3142:1997 (confirmed 2017) - Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
KS ISO 3143:1997 (confirmed 2017) - Oil of clove stems [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
KS ISO 3214:2000 (confirmed 2015) - Oil of Litsea cubeba (Litsea cubeba Pers.)
KS ISO 3217:1974 (confirmed 2017) - Oil of lemongrass (Cymbopogon citratus)
KS ISO 3515:2002 (confirmed 2015) - Oil of lavender (Lavandula angustifolia Mill.)
KS ISO 3516:1997 (confirmed 2017) - Oil of coriander fruits (Coriandrum sativum L.
KS ISO 3518:2002 (confirmed 2015) - Oil of sandalwood (Santalum album L.)
KS ISO 3519:2005 (confirmed 2015) - Oil of lime distilled, Mexican type (Citrus aurantifolia (Christm.) Swingle)
KS ISO 3520:1998 (confirmed 2017) - Oil of bergamot [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], Italian type
KS ISO 3526:1991 (confirmed 2017) - Oil of sage, Spanish (Salvia lavandulifolia Vahl)
KS ISO 3527:2000 (confirmed 2017) - Oil of parsley fruits (Petroselinum sativum Hoffm.)
KS ISO 3528:1997 (confirmed 2017) - Essential oil of mandarin, Italian type (Citrus reticulata Blanco)
KS ISO 3714:1981 – Oil of pennyroyal
KS ISO 3756:1976 (confirmed 2017) - Oil of cubeb
KS ISO 3757:1978 (confirmed 2017) - Oil of patchouli (Pogostemon cablin (Blanco) Benth.)
KS ISO 3761:1997 (confirmed 2017) - Oil of rosewood, Brazilian type (Aniba rosaeodora Ducke or Aniba parviflora (Meisn.) Mez.)
KS ISO 3809:1987 (confirmed 2017) - Oil of lime (cold pressed), Mexican type (Citrus aurantifolia (Christm.) Swingle), obtained by mechanical means
KS ISO 4716:1987 (confirmed 2017) - Essential oil of vetiver [Chrysopogon zizanioides (L.) Roberty, syn. Vetiveria zizanioides (L.) Nash]
KS ISO 4718:1981 (confirmed 2017) - Oil of lemongrass [Cymbopogon flexuosus (Nees ex Steudel) J.F. Watson]
KS ISO 4719:1999 (confirmed 2017) - Essential oil of spike lavender (Lavandula latifolia Medikus), Spanish type
KS ISO 4724:1984 (confirmed 2017) - Oil of cedarwood, Virginian (Juniperus virginiana L.)
KS ISO 4725:1976 (confirmed 2017) - Oil of cedarwood, Texas (Juniperus mexicana Schiede)
KS ISO 4727:1988 (confirmed 2017) - Oil of palmarosa (Cymbopogon martinii (Roxburgh) W. Watson var. motia)
Page 17 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
2. Essential Oils
NB EAS 64:2000 - Groundnut (peanut) oil for cosmetic industry – Specification
NB EAS 65: 2000 - Coconut oil for cosmetic industry — Specification
NB EAS 86:2000 - Sesame (simsim) oil for cosmetic industry – Specification
SASO 585-2001 - Regulations for perfumery products based on ethanol.
SASO 1526-2005 - Paraffinic mineral base oils
SASO 1780-2000 - White mineral oils (paraffinic) for medical purposes
SASO ISO TR 210:2001 - Essential oils- general rules for packaging conditioning and storage.
SASO ISO TR 211:2001 - Essential oils- general rules for labeling and marking of containers.
SASO ISO 875:2014 - Essential oils - evaluation of miscibility in ethanol
ISO 770:2002 (confirmed in 2012) - Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.)
ISO 855:2003 (confirmed in 2014) - Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression
ISO 856:2006 (confirmed in 2015) - Oil of peppermint (Mentha x piperita L.)
ISO 875:1999 (confirmed in 2015) - Essential oils -- Evaluation of miscibility in ethanol
ISO 1342:2012 - Essential oil of rosemary (Rosmarinus officinalis L.)
ISO 3033-1:2005 (confirmed in 2015) - Oil of spearmint -- Part 1: Native type (Mentha spicata L.)
ISO 3033-2:2005 (confirmed in 2015) - Oil of spearmint -- Part 2: Chinese type (80 % and 60 %) (Mentha viridis L. var. crispa Benth.), redistilled oil
ISO 3033-4:2005 (confirmed in 2015) - Oil of spearmint -- Part 4: Scotch variety (Mentha x gracilis Sole)
ISO 3044:1997 (confirmed in 2012) - Oil of eucalyptus citriodora Hook.
ISO 3045:2004 (confirmed in 2012) - Oil of bay [Pimenta racemosa (Mill.) J.W. Moore]
ISO 3053:2004 (confirmed in 2012) - Oil of grapefruit (Citrus x paradisi Macfad.), obtained by expression
ISO 3054:2017 - Oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula latifolia Medikus), French type
ISO 3061:2008 (confirmed in 2016) - Oil of black pepper (Piper nigrum L.)
ISO 3063:2004 (confirmed in 2012) - Oil of ylang-ylang (Cananga odorata (Lam.) Hook. f. et Thomson forma genuina)
ISO 3064:2015 - Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.))
ISO 3065:2011 (confirmed 2017) - Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole
ISO 3140:2011 (confirmed 2017) - Oil of sweet orange [Citrus sinensis (L.) Osbeck], obtained by physical extraction of the peel
ISO 3141:1997 (confirmed in 2012) - Oil of clove leaves [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
ISO 3142:1997 (confirmed in 2012) - Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
ISO 3143:1997 (confirmed in 2012) - Oil of clove stems [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
ISO 3214:2000 (confirmed in 2016) - Oil of Litsea cubeba (Litsea cubeba Pers.)
ISO 3215:1998 (confirmed in 2015) - Oil of nutmeg, Indonesian type (Myristica fragrans Houtt.)
ISO 3216:1997 (confirmed in 2012) - Oil of cassia, Chinese type (Cinnamomum aromaticum Nees, syn. Cinnamomum cassia Nees ex Blume)
No. Product Description Test Standard Number and Description
2. Essential Oils
ISO 4731:2012 - Essential oil of geranium (Pelargonium x ssp.)
ISO 4733:2004 (confirmed in 2012) - Oil of cardamom [Elettaria cardamomum (L.) Maton]
ISO 8896:2016 - Oil of caraway (Carum carvi Linnaeus)
ISO 8897:2010 (confirmed in 2015) - (Confirmed in 2015) - Oil of juniper berry (Juniperus communis L.)
ISO 8898:2003 (confirmed in 2014) - Oil of mandarin petitgrain (Citrus reticulata Blanco)
ISO 8899:2003 (confirmed in 2014) - Oil of lemon petitgrain [Citrus limon (L.) Burm. F.]
ISO 8900:2005 (confirmed in 2014) - Oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)]
ISO 8901:2003 (confirmed in 2015) - Oil of bitter orange petitgrain, cultivated (Citrus aurantium L.)
ISO 8902:2009 (confirmed in 2014) - Oil of lavandin Grosso (Lavandula angustifolia Mill. x Lavandula latifolia Medik.), French type
ISO 9301:2003 (confirmed in 2015) - Oil of lavandin Grosso (Lavandula angustifolia Mill. x Lavandula latifolia Medik.), French type
ISO 9776:1999 (confirmed in 2015) - Oil of Mentha arvensis, partially dementholized (Mentha arvensis L. var. piperascens Malinv. and var. glabrata Holmes)
ISO 9841:2013 - Essential oil of hyssop (Hyssopus officinalis L. ssp. officinalis)
ISO 9842:2003 (confirmed in 2015) - Oil of rose (Rosa x damascena Miller)
ISO 9843:2002 (confirmed in 2012) - Oil of cedarwood, Chinese type (Cupressus funebris Endlicher)
ISO 9844:2006 (confirmed in 2015) - Oil of bitter orange (Citrus aurantium L.)
ISO 9909:1997 (confirmed in 2012) - Oil of Dalmatian sage (Salvia officinalis L.)
ISO 10115:2013 - Essential oil of tarragon (Artemisia dracunculus L.)
ISO 10624:1998 (confirmed in 2015) - Oil of elemi (Canarium luzonicum Miq.)
ISO 10869:2010 (confirmed in 2016) - Oil of fir needle, Siberian (Abies sibirica Ledeb.)
ISO 11016:1999 (confirmed in 2015) - Oil of star anise, Chinese type (Illicium verum Hook. f.)
ISO 11019:1998 (confirmed in 2015) - Oil of roots of lovage (Levisticum officinale Koch)
ISO 11020:1998 (confirmed in 2015) - Oil of turpentine, Iberian type (Pinus pinaster Sol.)
ISO 11043:1998 (confirmed in 2015) - Oil of basil, methyl chavicol type (Ocimum basilicum L.)
ISO 14715:2010 (confirmed in 2015) - Oil of thyme containing thymol, Spanish type [Thymus zygis (Loefl.) L.]
ISO 14716:1998 (confirmed in 2015) - Oil of galbanum (Ferula galbaniflua Boiss. et Buhse)
ISO 14717:2008 (confirmed in 2011) - Oil of origanum, Spanish type [Coridothymus capitatus (L.) Rchb.f.]
ISO 16385:2014 - Essential oil of molle (Schinus areira L.), Argentinean type
ISO 16928:2014 - Essential oil of ginger [Zingiber officinale Roscoe]
ISO 17382:2007 (confirmed in 2016) - Oil of magnolia flower, China type (Michelia x alba DC)
ISO 17412:2007 (confirmed in 2011) - Oil of bitter fennel (Foeniculum vulgare Mill. ssp. vulgare var. vulgare)
ISO 19332:2007 (confirmed in 2017) - Oil of blue chamomile (Chamomilla recutita (L.) Rauschert syn. Matricaria chamomilla auct.)
ISO 21093:2003 (confirmed in 2014) - Oil of dwarf pine (Pinus mugo Turra)
ISO 21389:2004 (confirmed in 2012) - Oil of gum turpentine, Chinese (mainly from Pinus massoniana Lamb.)
No. Product Description Test Standard Number and Description
2. Essential Oils
ISO 21390:2005 (confirmed in 2014) - Oil of wintergreen, China (Gaultheria yunnanensis (Franch.) Rehd.), redistilled
ISO 22769:2009 (confirmed in 2015) - Oil of Australian sandalwood (Santalum spicatum (R.Br.) A.DC.)
ISO 23954:2009 (confirmed in 2015) - Oil of lime expressed, Persian type (Citrus latifolia Tanaka)
ISO 25157:2013 - Essential oil of rose, Chinese Kushui type (Rosa sertata x Rosa rugosa)
3. Cosmetic and Toiletries
EAS 126:1999 – Pure petroleum jelly for cosmetic industry - Specification
EAS 186: 2013 - Toilet soap – Specification
EAS 335:2013 – Cologne – Specification
EAS 336:2013 - Chemical Depilatories – Specification
EAS 337:2013 - Specification for Henna powder
EAS 338:2013 – Chemical hair relaxers and hair waving products – Specification
EAS 339:2013 - Hair creams, lotions and gels - Specification
EAS 340:2013 – Nail polish – Specification
EAS 341:2013 - Nail polish removers – Specification
EAS 342:2013 - Pomades and brilliantines – Specification
EAS 346:2013 – Labelling of cosmetics – General requirements
EAS 377-1:2013 – Cosmetics and cosmetics products – Part 1: List of substances prohibited in cosmetic products
EAS 377-2:2013 – Cosmetics and cosmetics products – Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down
EAS 377-3:2013 – Cosmetics and cosmetics products – Part 3: List of colorants allowed in cosmetic products
EAS 377-4:2013 – Cosmetics and cosmetics products – Part 4: List of preservatives allowed in cosmetic products
EAS 377-5:2013 – Cosmetics and cosmetics products – Part 5: List of UV filters allowed in cosmetic products
EAS 425:2005 – Skin powders – Specification, Part 2: Baby powders
EAS 461-1:2013 - Hair dyes – Part 1 Aryl diamine based formulated powders – Specification
EAS 766-1:2013 – Antibacterial toilet soap – Specification – Part 1: Solid
EAS 766-2:2013 – Antibacterial toilet soap – Specification – Part 1: Liquid
EAS 786:2013 - Skin care creams, lotions and gels – Specification
EAS 790:2013 – Liquid soap – Specification
EAS 812-1:2014 – Liquid hand wash – Specification - Part 1: Synthetic and combined (soap and synthetic) hand wash
KS EAS 126:1999 (confirmed 2017) – Pure petroleum jelly for cosmetic industry – Specification KS EAS 186: 2013 - Toilet soap – Specification
KS EAS 187:2000 - Standard specification for toothpaste
KS EAS 335:2013 – Cologne – Specification
KS EAS 336:2013 - Chemical Depilatories – Specification
KS EAS 337:2013 - Specification for Henna powder
KS EAS 338:2013 – Chemical hair relaxers and hair waving products – Specification KS EAS 339:2013 - Hair creams, lotions and gels - Specification
KS EAS 340:2013 – Nail polish – Specification
KS EAS 341:2013 - Nail polish removers – Specification
KS EAS 342:2013 - Pomades and brilliantines – Specification
KS EAS 346:2013 – Labelling of cosmetics – General requirements
KS EAS 377-1:2013 – Cosmetics and cosmetics products – Part 1: List of substances prohibited in cosmetic products
KS EAS 377-2:2013 – Cosmetics and cosmetics products – Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down
KS EAS 377-3:2013 – Cosmetics and cosmetics products – Part 3: List of colorants allowed in cosmetic products
KS EAS 377-4:2013 – Cosmetics and cosmetics products – Part 4: List of preservatives allowed in cosmetic products
Page 22 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
3. Cosmetic and Toiletries
KS EAS 377-5:2013 – Cosmetics and cosmetics products – Part 5: List of UV filters allowed in cosmetic products
KS EAS 461-1:2013 - Hair dyes – Part 1 Aryl diamine based formulated powders – Specification
KS EAS 766-1:2013 - Antibacterial toilet soap – Specification – Part 1: Solid
KS EAS 766-2:2013 – Antibacterial toilet soap – Specification – Part 1: Liquid
KS EAS 790:2013 – Liquid soap - Specification
KS EAS 812-1:2014 – Liquid hand wash – Specification - Part 1: Synthetic and combined (soap and synthetic) hand wash
NB EAS 126:1999 – Pure petroleum jelly for cosmetic industry - Specification
NB EAS 186: 2013 - Toilet soap – Specification
NB EAS 187:2000 - Standard specification for toothpaste
NB EAS 335:2013 – Cologne – Specification
NB EAS 336:2013 - Chemical Depilatories – Specification
NB EAS 337:2013 - Specification for Henna powder
NB EAS 338:2013 – Chemical hair relaxers and hair waving products – Specification
NB EAS 339:2013 - Hair creams, lotions and gels - Specification
NB EAS 340:2013 – Nail polish – Specification
NB EAS 341:2013 - Nail polish removers – Specification
NB EAS 342:2013 - Pomades and brilliantines – Specification
NB EAS 425:2005 – Skin powders – Specification, Part 2: Baby powders
NB EAS 339:2013 - Hair creams, lotions and gels - Specification
NB EAS 340:2013 – Nail polish – Specification
NB EAS 341:2013 - Nail polish removers – Specification
NB EAS 342:2013 - Pomades and brilliantines – Specification
NB EAS 425:2005 – Skin powders – Specification, Part 2: Baby powders
TZS 318 (Part 1): 1999 For cosmetic industry – Petroleum jelly Specification
TZS 318 (Part 2): 1999 Marketed petroleum – Jelly products ready for use as body ointment – Specification
TZS 638-1:2014 / EAS 377-1:2013 – Cosmetics and cosmetics products – Part 1: List of substances prohibited in cosmetic products
TZS 638-2:2006 / EAS 377-2:2013 – Cosmetics and cosmetics products – Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down
TZS 638-3:2014 / EAS 377-3:2013 – Cosmetics and cosmetics products – Part 3: List of colorants allowed in cosmetic products
TZS 638-4:2014 EAS 377-4:2013 – List of raw materials for cosmetic industry – Dyes, Pigments and Colour Additives Recognized as Safe (GRA)
TZS 638-5:2014 / EAS 377-5:2013 – Cosmetics and cosmetics products – Part 5: List of UV filters allowed in cosmetic products
Page 23 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
3. Cosmetic and Toiletries
TZS 775:2014 / EAS 338:2013– Chemical hair relaxers and hair waving products - Specification
TZS 811:2004 – Cosmetics and air freshener aerosols - Specification
TZS 1687:2014/EAS 340:2013 – Nail polish – Specification
TZS 1688:2014/EAS 341:2013 - Nail polish removers – Specification
TZS 1689-1:2014/EAS 461-1:2013 - Hair dyes – Part 1 Aryl diamine based formulated powders – Specification
US 189:2000/EAS 187:2000 - Standard specification for toothpaste
US 191:2007 - Petroleum jelly for cosmetic industry — Specification
US 488:2003 Skin powders - Specification - Part 2: Baby powders
US 637:2006 Bathing bars – Specification
US 638:2006 Household washing bars – Specification
US 875:2009 - Lipstick – Specification
US 1623-1:2015 – Hair dyes – Liquid oxidation hair dyes – Part : Aryl di-amine based – Specification
US 1624-1:2015 – Hair shampoo – Part 1: Synthetic detergent-based - Specification
US EAS 186: 2013 - Toilet soap – Specification
US EAS 335:2013 – Cologne - Specification
US EAS 336:2013 - Chemical Depilatories – Specification
US EAS 337:2013 - Specification for Henna powder
US EAS 338:2013 – Chemical hair relaxers and hair waving products – Specification
US EAS 339:2013 - Hair creams, lotions and gels - Specification
US EAS 340:2013 – Nail polish - Specification
US EAS 341:2013 - Nail polish removers – Specification
US EAS 342:2013 - Pomades and brilliantines – Specification
US EAS 346:2013 – Labelling of cosmetics – General requirements
US EAS 377-1:2013 – Cosmetics and cosmetics products – Part 1: List of substances prohibited in cosmetic products
US EAS 377-2:2013 – Cosmetics and cosmetics products – Part 2: List of substances which cosmetic products must not contain except subject to the restrictions laid down
Page 24 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
3. Cosmetic and Toiletries
US EAS 377-3:2013 – Cosmetics and cosmetics products – Part 3: List of colorants allowed in cosmetic products
US EAS 377-4:2013 – Cosmetics and cosmetics products – Part 4: List of preservatives allowed in cosmetic products
US EAS 377-5:2013 – Cosmetics and cosmetics products – Part 5: List of UV filters allowed in cosmetic products
US EAS 461-1:2013 - Hair dyes – Part 1 Aryl diamine based formulated powders – Specification
US EAS 766-1:2013 – Antibacterial toilet soap – Specification – Part 1: Solid
US EAS 766-2:2013 – Antibacterial toilet soap – Specification – Part 2: Liquid
US EAS 786:2013 - Skin care creams, lotions and gels – Specification
KS 1801-1:2003 (confirmed 2014) - Waterproof drawing ink - Specification - Part 1: Black waterproof drawing ink for architectural, engineering and survey use
KS 1801-2:2003 (confirmed 2014) - Waterproof drawing ink - Specification - Part 2: Coloured waterproof drawing ink for architectural, engineering and survey use
KS 1805:2004 (confirmed 2014) - Gallic acid for use in the ink industry – Specification
KS 1806:2004 (confirmed 2014)- Tannic acid for use in the ink industry - Specification
KS ISO 6743-1:2002 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 1: Family A (Total loss systems)
KS ISO 6743-2:1981 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 2: Family F (Spindle bearings, bearings and associated clutches)
KS ISO 6743-3A:1987 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 3: Family D (Compressors)
KS ISO 6743-3B:1988 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 3: Family D (Gas and refrigeration compressors)
KS ISO 6743-4:1999- Lubricants, industrial oils and related products (class L) -- Classification – Part 4: Family H (Hydraulic systems)
KS ISO 6743-5:1988 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 5: Family T (Turbines)
KS ISO 6743-6:1990 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 6: Family C (Gears)
KS ISO 6743-7:1986 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 7: Family M (Metalworking)
KS ISO 6743-8:1987- Lubricants, industrial oils and related products (class L) -- Classification -- Part 8: Family R (Temporary protection against corrosion)
KS ISO 6743-9:2003 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 9: Family X (Greases)
KS ISO 6743-10:1989 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 10: Family Y (Miscellaneous)
KS ISO 6743-11:1990 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 11: Family P (Pneumatic tools)
KS ISO 6743-12:1989 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 12: Family Q (Heat transfer fluids)
KS ISO 6743-13:1989 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 13: Family G (Slideways)
KS ISO 6743-14:1994 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 14: Family U (Heat treatment)
KS ISO 6743-15:2000 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 15: Family E (Internal combustion engine oils)
KS ISO 6743-99:2002 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 99: General
KS ISO 11158:1997 (confirmed 2014) - Lubricants, industrial oils and related products (class L) -- Family H (hydraulic systems) -- Specifications for categories HH, HL, HM, HV and HG
KS ISO 12922:1999 (confirmed 2014) - Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
KS ISO 15380:2002 (confirmed 2014) - Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for categories HETG, HEPG, HEES and HEPR
NB EAS 159:2000 – Engine oils - Specification
US 249:1999 / EAS 159 – Engine oils – Specification
US ISO 6743-15:2007 - Lubricants, industrial oils and related products (class L) -- Classification -- Part 15: Family E (Internal combustion engine oils)
TZS 798:2004 – Automotive service greases - Specification
TZS 1691:2014 - Automatic Transmission Fluids (ATF) based on road vehicles - Specification
TZS 1695:2014/EAS 290-2:2002 - Automatic Transmission Fluids (ATF) based on road vehicles – Specification
ISO 6743-1:2002 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 1: Family A (Total loss systems)
ISO 6743-2:1981 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 2: Family F (Spindle bearings, bearings and associated clutches)
ISO 6743-3:2003 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 3: Family D (Compressors)
ISO 6743-4:2015- Lubricants, industrial oils and related products (class L) -- Classification – Part 4: Family H (Hydraulic systems)
ISO 6743-5:2006 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 5: Family T (Turbines)
ISO 6743-6:1990 (confirmed in 2011) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 6: Family C (Gears)
No. Product Description Test Standard Number and Description
5. Lubricants, Industrial Oils and related products
ISO 6743-7:1986 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 7: Family M (Metalworking)
ISO 6743-8:1987 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 8: Family R (Temporary protection against corrosion)
ISO 6743-9:2003 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 9: Family X (Greases)
ISO 6743-10:1989 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 10: Family Y (Miscellaneous)
ISO 6743-11:1990 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 11: Family P (Pneumatic tools)
ISO 6743-12:1989 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 12: Family Q (Heat transfer fluids)
ISO 6743-13:2002 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 13: Family G (Slideways)
ISO 6743-14:1994 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 14: Family U (Heat treatment)
ISO 6743-15:2007 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 15: Family E (Internal combustion engine oils)
ISO 6743-99:2002 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Classification -- Part 99: General
ISO 8068:2006 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Family T (Turbines) -- Specification for lubricating oils for turbines
ISO 12924:2010 (confirmed in 2016) - Lubricants, industrial oils and related products (Class L) -- Family X (Greases) – Specification
ISO 12925-1:1996 (confirmed in 2013) - Lubricants, industrial oils and related products (class L) -- Family C (Gears) -- Part 1: Specifications for lubricants for enclosed gear systems
ISO/TS 12927:1999 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Family M (Metalworking) -- Guidelines for establishing specifications
ISO/TS 12928:1999 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications
ISO 13738:2011 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Family E (Internal combustion engine oils) -- Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
ISO 15380:2016 - Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for categories HETG, HEPG, HEES and HEPR
ISO 19378:2003 (confirmed in 2014) - Lubricants, industrial oils and related products (class L) -- Machine-tool lubricants -- Categories and specifications
ISO 24254:2007 (confirmed in 2016) - Lubricants, industrial oils and related products (class L) -- Family E (internal combustion engine oils) -- Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB)
ISO 10050:2005 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Family T (Turbines) -- Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
ISO 11158:2009 (confirmed in 2015) - Lubricants, industrial oils and related products (class L) -- Family H (hydraulic systems) -- Specifications for categories HH, HL, HM, HV and HG
ISO 12922:2012 - Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
TZS 1516:2011 / ISO 25841:2011 – Female condoms – Requirements and test
TZS 1532:2012 – Plastic crates for fruits and vegetables – Specification
TZS 1635:2013 / ISO 4079:2009 - Rubber hoses and hose assemblies – Textile-reinforced hydraulic types for oil- based or water-based fluids - Specification
TZS 1636:2013 / ISO 18752:2012 – Rubber hoses and hose assemblies – Wire-or-textile-reinforced single pressure types for hydraulic application – Specification
TZS 1637:2013 / ISO 1307:2006 - Rubber and plastics hoses- Hose sizes, minimum and maximum inside diameters and tolerance on cut- to- length hoses
US 202-1:2015 – Flexible polyurethane foam – Part 1: Polyether type – Specification
US 202-2:2015 – Flexible polyurethane foam – Part 2: Mattresses – Specification
US 202-3:2015 – Flexible polyurethane foam – Part 3: Reconstituted foams – Specification
US 202-4:2015 – Flexible polyurethane foam – Part 4: Polyester type - Specification
US 438:2002 – Specification for plastic containers for up to 5 litres capacity
US 634:2006 - Specification for plastic monobloc chairs
US 766:2007 - Plastic basins — Specification
US 773:2007 – Flat and carrier plastic bags - Specification
US 883-1:2009 – Single-use medical examination gloves – Part 1: Specification for gloves made from rubber latex or rubber solution
US 883-2:2009 – Single-use medical examination gloves – Part 2: Specification for gloves made from poly (vinyl chloride)
US ISO 1307:2006 - Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
US ISO 1403:2005 - Rubber hoses, textile-reinforced, for general-purpose water applications – Specification
US ISO 1436:2009 - Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids – Specification
US ISO 1825:2010 - Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling – Specification
US ISO 2398:2006 - Rubber hoses, textile-reinforced, for compressed air – Specification
US ISO 2928:2003 - Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) – Specification
US ISO 2929:2014 - Rubber hoses and hose assemblies for bulk fuel delivery by truck – Specification
US ISO 3821:2008 - Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
US ISO 3861:2005 - Rubber hoses for sand and grit blasting – Specification
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
US ISO 3862:2009 - Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids – Specification
US ISO 3949:2009 - Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications – Specification
US ISO 3994:2014 - Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials – Specification
US ISO 4074: 2002 - Natural latex rubber condoms — Requirements and test methods
US ISO 4079:2015 - Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids – Specification
US ISO 4081:2010 - Rubber hoses and tubing for cooling systems for internal-combustion engines – Specification
US ISO 4586-1:1997 - High-pressure laminates – Sheets from thermosetting resins – Part 1: Classification and specifications
US ISO 4641:2010 - Rubber hoses and hose assemblies for water suction and discharge – Specification
US ISO 4642-1:2009 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems
US ISO 4642-2:2009 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
US ISO 4643:1992 - Moulded plastics footwear -- Lined or unlined poly(vinyl chloride) boots for general industrial use – Specification
US ISO 5771:2008 - Rubber hoses and hose assemblies for transferring anhydrous ammonia – Specification
US ISO 5772:1998 - Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems – Specification
US ISO 5774:2016 - Plastics hoses -- Textile-reinforced types for compressed-air applications – Specification
US ISO 6134:2005 - Rubber hoses and hose assemblies for saturated steam – Specification
US ISO 6224:2011 - Thermoplastics hoses, textile-reinforced, for general-purpose water applications – Specification
US ISO 6804:2009 - Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers – Specification
US ISO 6807:2003 - Rubber hoses and hose assemblies for rotary drilling and vibration applications – Specification
US ISO 8028:1999 - Rubber and/or plastics hoses and hose assemblies for airless paint spraying – Specification
USI ISO 8029:2007 - Plastics hose -- General-purpose collapsible water hose, textile-reinforced – Specification
US ISO 8066-2:2001 - Rubber and plastics hoses and hose assemblies for automotive air conditioning -- Specification -- Part 2: Refrigerant 134a
US ISO 10282:2002 – Single-use sterile rubber surgical gloves – Specification
US ISO 10380:2012 - Pipework -- Corrugated metal hoses and hose assemblies
US ISO 10806:2003 - Pipework -- Fittings for corrugated metal hoses
US ISO 11237:2010 - Rubber hoses and hose assemblies -- Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids – Specification
US ISO 11424:1996 - Rubber hoses and tubing for air and vacuum systems for internal-combustion engines – Specification
US ISO 11425:1996 (confirmed in 2012) - Rubber hoses and hose assemblies for automobile power-steering systems – Specification
US ISO 12151-1:2010 - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
US ISO 12151-2:2003 - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
US ISO 12151-3:2010 - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
US ISO 12151-4:2007 - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 4: Hose fittings with ISO 6149 metric stud ends
US ISO 13363:2004 - Rubber and plastics hoses for marine-engine wet-exhaust systems – Specification
US ISO 13775-1:2000 - Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications
US ISO 13775-2:2000 - Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications
US ISO 14557:2002 - Fire-fighting hoses -- Rubber and plastics suction hoses and hose assemblies
US ISO 17165-1:2007 - Hydraulic fluid power -- Hose assemblies -- Part 1: Dimensions and requirements
US ISO 23297:2008 - Thermoplastics hoses and hose assemblies -- Wire or synthetic yarn reinforced single-pressure types for hydraulic applications – Specification
US ISO 25518:2009 – Single-use rubber gloves for general applications - Specification
SASO 862:1994 (GSO 495:1994) - Polybutylene (pb) plastic tubing for water
ASTM D1755-15 - Standard Specification for Poly (Vinyl Chloride) Resins
ASTM D1763-00(2013) - Standard Specification for Epoxy Resins
ASTM D4549-15 - Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D4635-16 - Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
ASTM D4802-16 - Standard Specification for Poly (Methyl Methacrylate) Acrylic Plastic Sheet
ASTM D5675-13 - Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ISO 1060-1:1998 (confirmed 2013) – Plastics – Homopolymer and copolymer resins of vinyl chloride – Part 1: Designation and basis for specification
ISO 4074:2015 - Natural rubber latex male condoms -- Requirements and test methods
ISO 4586-1:2015 - High-pressure laminates – Sheets from thermosetting resins – Part 1: Classification and specifications
ISO 10282:2014 – Single-use sterile rubber surgical gloves – Specification
ISO 11193-1:2008 (confirmed in 2013) - Single-use medical examination gloves -- Part 1: Specification for gloves made from rubber latex or rubber solution
ISO 11193-2:2006 (confirmed in 2016) - Single-use medical examination gloves -- Part 2: Specification for gloves made from poly(vinyl chloride)
ISO 15747:2010 – Plastic containers for intravenous injections
ISO 8028:1999 - Rubber and/or plastics hoses and hose assemblies for airless paint spraying – Specification
ISO 20299-1:2015 - Film for wrapping rubber bales -- Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR)
ISO 20299-2:2006 - Film for wrapping rubber bales -- Part 2: Natural rubber
ISO 20299-3:2008 (confirmed in 2016) - Film for wrapping rubber bales -- Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
ISO 25518:2009 (confirmed in 2014) – Single-use rubber gloves for general applications - Specification
ISO 25841:2014 – Female condoms – Requirements and test methods
ISO 2000:2014 - Rubber, raw natural -- Guidelines for the specification of technically specified rubber (TSR)
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 2027:1990 (confirmed in 2016) - Natural rubber latex concentrate, evaporated, preserved – Specification
ISO 4898:2010 (confirmed in 2015) - Rigid cellular plastics -- Thermal insulation products for buildings – Specifications
ISO 5999:2013 - Flexible cellular polymeric materials -- Polyurethane foam for load-bearing applications excluding carpet underlay – Specification
ISO 6453:1985 (confirmed in 2012) - Polymeric materials, cellular flexible -- Polyvinylchloride foam sheeting – Specification
ISO 6915:1991 (confirmed in 2012) - Flexible cellular polymeric materials -- Polyurethane foam for laminate use – Specification
ISO 6916-1:1995 (confirmed in 2015) - Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 1: Sheeting
ISO 6916-2:2001 (confirmed in 2016) - Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 2: Mouldings and extrusions
ISO 8873-1:2006 (confirmed in 2016) - Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 1: Material specifications
ISO 11833-1:2012 - Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 1: Sheets of thickness not less than 1 mm
ISO 11833-2:1998 (confirmed in 2013) - Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 2: Sheets of thickness less than 1 mm
ISO 11963:2012 - Plastics -- Polycarbonate sheets -- Types, dimensions and characteristics
ISO 13636:2012 - Plastics -- Film and sheeting -- Non-oriented poly(ethylene terephthalate) (PET) sheets
ISO 14526-1:1999 (confirmed 2014) - Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 1: Designation system and basis for specifications
ISO 14526-3:1999 (confirmed 2014) - Plastics -- Phenolic powder moulding compounds (PF-PMCs) – Part 3: Requirements for selected moulding compounds
ISO 14527-1:1999 (confirmed 2014) - Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 1: Designation system and basis for specifications
ISO 14527-3:1999 (confirmed 2014) - Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 3: Requirements for selected moulding compounds
ISO 14528-1:1999 (confirmed 2014) – Plastics – Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 1: Designation system and basis for specification
ISO 14528-3:1999 (confirmed 2014) – Plastics – Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 3: Requirements for selected moulding compounds
ISO 14529-1:1999 (confirmed 2014) – Plastics – Melamine/phenolic powder moulding compounds (MP-PMCs) – Part 1: Designation system and basis for specification
ISO 14529-3:1999 (confirmed 2014) – Plastics – Melamine/phenolic powder moulding compounds (MP-PMCs) – Part 3: Requirements for selected moulding compounds
ISO 14530-1:1999 (confirmed 2014) – Plastics – Unsaturated-polyester powder moulding compounds (UP-PMCs) – Part 1: Designation system and basis for specification
ISO 14530-3:1999 (confirmed 2014) – Plastics – Unsaturated-polyester powder moulding compounds (UP-PMCs) – Part 3: Requirements for selected moulding compounds
ISO 14631:1999 (confirmed in 2014) - Extruded sheets of impact-modified polystyrene (PS-I) -- Requirements and test methods
ISO 14632:1998 (confirmed in 2013) - Extruded sheets of polyethylene (PE-HD) -- Requirements and test methods
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 15013:2007 (confirmed in 2015) - Plastics -- Extruded sheets of polypropylene (PP) -- Requirements and test methods
ISO 15014:2007 (confirmed in 2015) - Plastics -- Extruded sheets of poly(vinylidene fluoride) (PVDF) -- Requirements and test methods
ISO 15015:2011 (confirmed in 2016) - Plastics -- Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) -- Requirements and test methods
ISO 15252-1:1999 (confirmed 2014) – Plastics – epoxy powder moulding compounds (EP-PMCs) – Part 1: Designation system and bsis of specification
ISO 15252-3:1999 (confirmed 2014) – Plastics – epoxy powder moulding compounds (EP-PMCs) – Part 3: requirements for selected moulding compounds
ISO 15527:2010 - Plastics -- Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) -- Requirements and test methods
ISO 15987:2003 (confirmed in 2013) - Plastics -- Film and sheeting -- Biaxially oriented polyamide (nylon) films
ISO 15988:2003 (confirmed in 2013) - Plastics -- Film and sheeting -- Biaxially oriented poly(ethylene terephthalate) (PET) films
ISO 15989:2004 (confirmed in 2012) - Plastics -- Film and sheeting -- Measurement of water-contact angle of corona-treated films
ISO 17088:2012 – Specification for compostable plastics
ISO 17555:2003 (confirmed in 2013) - Plastics -- Film and sheeting -- Biaxially oriented polypropylene (PP) films
ISO 17557:2003 (confirmed in 2013) - Plastics -- Film and sheeting -- Cast polypropylene (PP) films
ISO 4586-3:2015 - High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
ISO 4586-5:2015 - High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 5: Classification and specifications for flooring grade laminates less than 2 mm
thick intended for bonding to supporting substrates
ISO 4586-6:2015 - High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
ISO 4586-7:2015 - High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 7: Classification and specifications for design laminates
ISO 4586-8:2015 - High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 8: Classification and specifications for alternative core laminates
ISO 13894-2:2005 (confirmed in 2013) - High-pressure decorative laminates -- Composite elements -- Part 2: Specifications for composite elements with wood-based substrates for interior use
ISO 19712-1:2008 (confirmed in 2016) - Plastics -- Decorative solid surfacing materials -- Part 1: Classification and specifications
ISO 4437-1:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 1: General
ISO 4437-2:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 2: Pipes
ISO 4437-3:2014 - Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) -- Part 3: Fittings
ISO 4437-4:2015 - Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) -- Part 4: Valves
ISO 4437-5:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 5: Fitness for purpose of the system
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 6993-1:2006 (confirmed in 2015) - Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
ISO 6993-2:2006 (confirmed in 2015) - Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
ISO 6993-3:2006 (confirmed in 2015) - Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
ISO 11424:2017 - Rubber hoses and tubing for air and vacuum systems for internal-combustion engines – Specification
ISO 13775-1:2015 - Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications
ISO 13775-2:2016- Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications
ISO 15840:2004 - Ships and marine technology -- Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
ISO 16486-1:2012 - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 1: General
ISO 16486-2:2012 - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 2: Pipes
ISO 16486-3:2012 - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 3: Fittings
ISO 16486-5:2012 - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 5: Fitness for purpose of the system
ISO 1307:2006 (confirmed in 2014) - Rubber and plastics hoses -- Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
ISO 1403:2005 (confirmed in 2013) - Rubber hoses, textile-reinforced, for general-purpose water applications – Specification
ISO 2398:2016 - Rubber hoses, textile-reinforced, for compressed air – Specification
ISO 3994:2014 - Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials – Specification
ISO 4641:2016 - Rubber hoses and hose assemblies for water suction and discharge – Specification
ISO 5774:2016 - Plastics hoses -- Textile-reinforced types for compressed-air applications – Specification
ISO 6134:2017 - Rubber hoses and hose assemblies for saturated steam – Specification
ISO 6224:2011(confirmed 2016) - Thermoplastics hoses, textile-reinforced, for general-purpose water applications – Specification
ISO 8029:2014 - Plastics hose -- General-purpose collapsible water hose, textile-reinforced – Specification
ISO 10380:2012 - Pipework -- Corrugated metal hoses and hose assemblies
ISO 10806:2003 (confirmed in 2015) - Pipework -- Fittings for corrugated metal hoses
ISO 12151-1:2010 (confirmed in 2016) - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
ISO 12151-2:2003 (confirmed in 2015) - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
ISO 12151-3:2010 (confirmed in 2015) - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
ISO 12151-4:2007 (confirmed in 2015) - Connections for hydraulic fluid power and general use -- Hose fittings – Part 4: Hose fittings with ISO 6149 metric stud ends
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 12151-5:2007 (confirmed in 2015) - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
ISO 12151-6:2009 (confirmed in 2016) - Connections for hydraulic fluid power and general use -- Hose fittings -- Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
ISO 15465:2004 (confirmed in 2013) - Pipework -- Stripwound metal hoses and hose assemblies
ISO 17165-1:2007 (confirmed in 2011) - Hydraulic fluid power -- Hose assemblies -- Part 1: Dimensions and requirements
ISO 18752:2014 - Rubber hoses and hose assemblies -- Wire- or textile-reinforced single-pressure types for hydraulic applications – Specification
ISO 1436:2009 - Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 1823:2015 - Rubber hose and hose assemblies for oil suction and discharge service – Specification
ISO 1825:2010 - Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling – Specification
ISO 2928:2003 (confirmed in 2013) - Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) – Specification
ISO 2929:2014 - Rubber hoses and hose assemblies for bulk fuel delivery by truck – Specification
ISO 3821:2008 - Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
ISO 3861:2005 (confirmed in 2013) - Rubber hoses for sand and grit blasting – Specification
ISO 3862:2009 - Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 3949:2009 - Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications – Specification
ISO 4079:2015 - Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 4081:2016 - Rubber hoses and tubing for cooling systems for internal-combustion engines – Specification
ISO 4642-1:2015 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems
ISO 4642-2:2015 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
ISO 5771:2008 (confirmed in 2016) - Rubber hoses and hose assemblies for transferring anhydrous ammonia – Specification
ISO 5772:2015 - Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems – Specification
ISO 6804:2016 - Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers – Specification
ISO 6805:1994 (confirmed in 2015) - Rubber hoses and hose assemblies for underground mining -- Wire-reinforced hydraulic types for coal mining – Specification
ISO 6806:2014 - Rubber hoses and hose assemblies for use in oil burners – Specification
ISO 6807:2003 (confirmed in 2013) - Rubber hoses and hose assemblies for rotary drilling and vibration applications – Specification
ISO 6808:2014 - Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids – Specification
ISO 8028:1999 - Rubber and/or plastics hoses and hose assemblies for airless paint spraying – Specification
ISO 8066-2:2001 (confirmed in 2016) - Rubber and plastics hoses and hose assemblies for automotive air conditioning -- Specification -- Part 2: Refrigerant 134a
ISO 8207:1996 (confirmed in 2012) - Gas welding equipment -- Specification for hose assemblies for equipment for welding, cutting and allied processes
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 8789:2009 - Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles – Specification
ISO 11237:2010 - Rubber hoses and hose assemblies -- Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 11425:1996 (confirmed in 2012) - Rubber hoses and hose assemblies for automobile power-steering systems – Specification
ISO 11759:1999 - Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) – Specification
ISO 13363:2016 - Rubber and plastics hoses for marine-engine wet-exhaust systems – Specification
ISO 1401:2016 - Rubber hoses for agricultural spraying
ISO 1436:2009 - Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 1823:2015 - Rubber hose and hose assemblies for oil suction and discharge service – Specification
ISO 1825:2010 - Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling – Specification
ISO 2928:2003 (confirmed in 2013) - Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) – Specification
ISO 2929:2014 - Rubber hoses and hose assemblies for bulk fuel delivery by truck – Specification
ISO 3861:2005 (confirmed in 2013) - Rubber hoses for sand and grit blasting – Specification
ISO 3862:2009 - Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 3949:2009 - Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications – Specification
ISO 4079:2015 - Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 4081:2016 - Rubber hoses and tubing for cooling systems for internal-combustion engines – Specification
ISO 4642-1:2015 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems
ISO 4642-2:2015 - Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
ISO 5359:2014 - Anaesthetic and respiratory equipment -- Low-pressure hose assemblies for use with medical gases
ISO 14557:2002 (confirmed 2012) - Fire-fighting hoses -- Rubber and plastics suction hoses and hose assemblies
ISO 17324:2014 - Rubber hoses for automotive turbochargers – Specification
ISO 19013-1:2005 (confirmed in 2013) - Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 1: Diesel fuels
ISO 19013-2:2016 - Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 2: Gasoline fuels
ISO 21012:2006 (confirmed in 2010) - Cryogenic vessels – Hoses
ISO 23297:2008 (confirmed in 2011) - Thermoplastics hoses and hose assemblies -- Wire or synthetic yarn reinforced single-pressure types for hydraulic applications – Specification
ISO 27126:2014 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals – Specification
ISO 27127:2014 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas – Specification
ISO 28017:2011/Amd 1:2015 - Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications – Specification
Page 42 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
8.
Rubber and Plastic Products
ISO 3934:2002 (confirmed in 2012) - Rubber, vulcanized and thermoplastic -- Preformed gaskets used in buildings -- Classification, specifications and test methods
ISO 4633:2015 - Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
ISO 4635:2011(confirmed in 2016) - Rubber, vulcanized -- Preformed joint seals for use between concrete paving sections of highways – Specification
ISO 5892:2013 - Rubber building gaskets -- Materials for preformed solid vulcanized structural gaskets – Specification
ISO 6447:1983 - Rubber seals -- Joint rings used for gas supply pipes and fittings -- Specification for material
ISO 6448:1985 (confirmed in 2012) - Rubber seals -- Joint rings used for petroleum product supply pipes and fittings -- Specification for material
ISO 9631:2003 - Rubber seals -- Joint rings for pipelines for hot-water supply up to 110 degrees C -- Specification for the material
ISO 16010:2005 (confirmed in 2013) - Elastomeric seals -- Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
ISO 16589-1:2011 (confirmed in 2016)- Rotary shaft lip-type seals incorporating thermoplastic sealing elements -- Part 1: Nominal dimensions and tolerances
ISO 23711:2003 (confirmed in 2013) - Elastomeric seals -- Requirements for materials for pipe joint seals used in water and drainage applications -- Thermoplastic elastomers
ISO 4643:1992 (confirmed in 2013) - Moulded plastics footwear -- Lined or unlined poly (vinyl chloride) boots for general industrial use – Specification
ISO 6123-1:2015 - Rubber or plastics covered rollers -- Specifications -- Part 1: Requirements for hardness
ISO 6123-2:2015 - Rubber or plastics covered rollers -- Specifications -- Part 2: Surface characteristics
ISO 5893:2002 (confirmed in 2012) - Rubber and plastics test equipment -- Tensile, flexural and compression types (constant rate of traverse) – Specification
ISO 14531-1:2002 (confirmed in 2013) - Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes
ISO 14531-2:2004 (confirmed in 2012) - Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing
ISO 14531-3:2010 (confimed in 2016) - Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
ISO 17885:2015/Amd 1:2016 - Plastics piping systems -- Mechanical fittings for pressure piping systems – Specifications
9. Paints and Varnish
EAS 184:2000 – Emulsion paint - Specification
EAS 289:2007 - Specification for aluminium pigments for paints
KS 159:1979 (confirmed 2011)- Specification for zinc oxide for paints
KS 160:1980 (confirmed 2016) - Specification for whiting for paints
KS 162:1997 (confirmed 2017) - Specification for road marking
KS 163:2000 (confirmed 2017) - Colours for ready mixed paints
KS 621:1986 (confirmed 2011) - Specification for black bituminous paints for cold application
KS 622:1987 (confirmed 2017)- Specification for aluminium priming paints for woodwork
KS 666:2011 (confirmed 2017) - Specification for white spirit (mineral turpentine)
KS 667:2013 - Specification for water thinned priming paints for wood
KS 811:2013 - Specification for semi-gloss emulsion paints for exterior use
KS 812:2012 - Specification for matt emulsion paint for exterior use
KS 813:2013 - Specification for matt solvent borne paints for interior and exterior use
KS 909:1991 - Specification for semi-gloss solvent borne paints for interior and exterior use
KS 910:1999 - Specification for super-gloss solvent borne paints for interior and exterior use
Page 43 of 48
Philippine Accreditation Bureau
No. Product Description Test Standard Number and Description
9.
Paints and Varnish
KS 1101:1991 (confirmed 2011) - Specification for titanium dioxide pigments for paints
KS 1102:1991 (confirmed 2011)- Specification for lithopone pigments for paints
KS 1103:1994 (confirmed 2011)- Specification for aluminium pigments for paints
KS 1104:1992 (confirmed 2005)- Specification for iron oxide pigments for paints
KS 1105:1994 (confirmed 2011)- Specification for Zinc dust pigment for paint
KS 1266:1995 - Specification for polyester body fillers
KS 1274:1996 - Specification for epoxy paint for coffee fermentation tanks
KS 1276:2012 - Specification for Air dried roofing paints
KS 1027-1:2012 - Specification for auto-refinishing paints - Part 1: Synthetic resin
KS 1027-2:2012 - Specification for auto-refinishing paints - Part 2: Nitrocellulose resin based
KS 1716:2012 - Specification for 2-pack acrylic resin based auto refinishing paint
KS 1717:2003 (confirmed 2017) - Specification for thinner for synthetic resin based auto-refinishing paints
KS 1718:2003 (confirmed 2017) - Specification for thinner for nitocellulose resin based paints and lacquers
KS 1719:2003 (confirmed 2017) - Specification for thinner for acrylic resin based auto-refinishing paint
SASO 2708:2007 - Paints and varnishes -- Adhesion strength
SASO 471:2002 - Paints and varnishes - Alkyd flat paints
SASO 2833:2011 - Paints and varnishes - Solvent based polyurethane paints
SASO 2060:2002 - Paints and varnishes - Emulsion Primers
SASO 470:2016 - Paints and varnishes - Emulsion paints
SASO 944:1998 - Paints and Varnishes - Glass beads for road marking Paints.
SASO 472:2002 - Paints and varnishes – Gloss and semi-gloss alkyd enamel paints
SASO 929:1994 - Paints and Varnishes - Hot applied thermoplastic Road making materials. Part 1: Specification and Requirements. Part 2: Road Performance. Part 3: Specification for applications.
SASO 1960:2001 - Polish and oil finish for furniture
SASO 817:1994 - Primary paints
SASO 819-1994 - Road Marking Paints
SASO ISO 591-1:2014 - Titanium Dioxide Pigments for Paints – Part 1: Specification and methods of test
SASO 2628:2006 - Paint and Varnishes - Red oxide metal primer
SASO 2629:2006 - Paint and Varnishes - solvent borne alkali resistant primer
SASO 2626:2006 - Paint and Varnishes - water based texture paints
No. Product Description Test Standard Number and Description
9.
Paints and Varnish
ISO 3262-4:1998 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 4: Whiting
ISO 3262-5:1998 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 5: Natural crystalline calcium carbonate
ISO 3262-6:1998 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 6: Precipitated calcium carbonate
ISO 3262-7:1998 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 7: Dolomite
ISO 3262-8:1999 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 8: Natural clay
ISO 3262-9:1997 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 9: Calcined clay
ISO 3262-10:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 10: Natural talc/chlorite in lamellar form
ISO 3262-11:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 11: Natural talc, in lamellar form, containing carbonates
ISO 3262-12:2001 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 12: Muscovite-type mica
ISO 3262-13:1997 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 13: Natural quartz (ground)
ISO 3262-14:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 14: Cristobalite
ISO 3262-15:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 15: Vitreous silica
ISO 3262-16:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 16: Aluminium hydroxides
ISO 3262-17:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 17: Precipitated calcium silicate
ISO 3262-18:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 18: Precipitated sodium aluminium silicate
ISO 3262-19:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 19: Precipitated silica
ISO 3262-20:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 20: Fumed silica
ISO 3262-21:2000 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 21: Silica sand (unground natural quartz)
ISO 3262-22:2001 (confirmed in 2016) - Extenders for paints -- Specifications and methods of test -- Part 22: Flux-calcined kieselguhr
ISO 3549:1995 (confirmed in 2016) - Zinc dust pigments for paints -- Specifications and test methods
ISO 3711:1990 (confirmed in 2012) - Lead chromate pigments and lead chromate-molybdate pigments -- Specifications and methods of test
ISO 4620:1986 (confirmed in 2012) - Cadmium pigments -- Specifications and methods of test
ISO 4621:1986 (confirmed in 2012) - Chrome oxide green pigments -- Specifications and methods of test
ISO 6745:1990 (confirmed in 2012) - Zinc phosphate pigments for paints -- Specifications and methods of test
ISO 150:2006 - Raw, refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test
ISO 276:2002 (confirmed in 2012) - Binders for paints and varnishes -- Linseed stand oil -- Requirements and methods of test
ISO 277:2002 (confirmed in 2012) - Binders for paints and varnishes -- Raw tung oil -- Requirements and methods of test