PHC-1000 sellsheets2-24

INDUSTRIAL & COMMERCIAL EQUIPMENT • INSTRUMENTATION • LIFE SCIENCE • FOOD & BEVERAGE • COMPRESSORS • TRANSPORTATION • ASSEMBLY CELLS • CONTROL PANELS • DIAGNOSTICS • FUEL DISPENSING

Our history of designing and manufacturing 2-way valves allows us

to offer a wide variety of standard products while providing easy

modifications for custom solutions. Valve offerings range from general-

purpose flow control to industry- and application-specific products.

Together, we can bring all of our standard and custom technologies under one umbrella.

2-Way Solenoid Valves

Parker Hannifin CorporationFluid Control Division1 800 825 8305www.parker.com/fcd

2-Way Solenoid ValvesRange

Port Sizes (NPT) 1/8" 2.0"

Orifice Sizes 1/32" 1 1/2"

Pressure Rating Vacuum 4,500 psiFlow Factors (Cv) 0.02 38.6Media Temperature -40°F 353°FAmbient Temperature -40°F 150°FFunction Normally Open, Normally ClosedBody Material Stainless Steel, Brass, PlasticApplication Specific High Pressure, Anti-Water Hammer, Manual Override,

Dry Operator, Manifold Mount

POWER GENERATION • CHEMICAL PROCESSING • OIL & GAS • PHARMACEUTICAL • PULP & PAPER • FOOD & BEVERAGE • FACTORY AUTOMATION

Parker FCD provides a wide range of 3-way solenoid valve solutions for

directional flow control for instrumentation, valve actuation, cylinder control,

dispensing equipment, and compressors. Available in stainless steel, brass,

and aluminum with coil options to meet most industry requirements.

Together, we can control the motion of the world, whichever direction it's spinning.




Port Sizes (NPT) 1/8" 3/4"

Orifice Sizes 1/32" 3/4"

Pressure Rating Vacuum 1,100 psiFlow Factors (Cv) 0.02 7.3Media Temperature -40°F 240°FAmbient Temperature -40°F 180°FFunction 3-Way, 2 Position, Normally Open, Normally Closed,

UniversalBody Material Stainless Steel, Brass, AluminumApplication Specific Quick Exhaust, High Pressure, Manifold Mount, Direct

NAMUR Mount, Manual Reset, Manual Override

Parker FCD's 4-way solenoid valves come in pipe mount and direct

NAMUR mount for double-acting valve actuators. Highly engineered and

specification grade, they perform in temperatures as low as -40ºF.

Coupled with hazardous location coils, they're pure "high performance."


OIL & GAS • INSTRUMENTATION • LIFE SCIENCE • FOOD & BEVERAGE • TRANSPORTATION • ASSEMBLY CELLS • CONTROL PANELS • DIAGNOSTICS • COMPRESSORS • FUEL DISPENSING • INDUSTRIAL & COMMERCIAL EQUIPMENT

Together, we can meet demanding applications from the smallest lab to the largest ocean.





Pressure Rating Vacuum 150 psiFlow Factors (Cv) 0.05 4.0Media Temperature -40°F 240°FAmbient Temperature -40°F 167°FFunction 4-Way, 2 and 3 Position, Normally Open, Normally Closed,

Dual PositionBody Material Stainless Steel, Brass, AluminumApplication Specific Direct NAMUR Mount, Manual Override

ElectricalTo meet your solenoid needs across the globe, we offer a large selection of

coil voltages and electrical connections. From low power options for energy

savings to high performance coils, our valves are ready to fit into and perform

in a wide variety of applications and environments, anywhere in the world.

Together, we can deliver power where we want to and conserve energy when we need to.

ELECTRICAL • INSTRUMENTATION • LIFE SCIENCE • FOOD & BEVERAGE • TRANSPORTATION • ASSEMBLY CELLS • CONTROL PANELS • DIAGNOSTICS • SPRAYING SYSTEMS • COMPRESSORS • FUEL DISPENSING


RangeVoltages AC — 24/60, 120/60-110/50, 240/60-220/50, 208/60,

480/60-440/50DC — 12, 24, 48, 120

Power Consumption 0.6 to 22 Watts Continuous, Latching, Pulse & HoldElectrical Connection 1/2" NPT Conduit, Lead Wire, 1/4" Spade, Screw Terminal,

Cable Gland, DIN 43650A/ISO4400, DIN 43650BTemperature Rating NEMA Class F and Class HMoisture Ratings NEMA 1, 2, 3, 4, 4X, 7, 9;

IP 65, 66, 67Agencies UL, CSA, FM, ATEXHazardous Location Class I, Div. 1 & 2, Groups A, B, C, D

Class II, Div. 1 & 2, Groups E, F, G Class III, Div. 1Class IV, Div. 1

Accessories DIN Connectors, Timers, Splice Boxes

Electrical

FOOD & BEVERAGE • STERILIZERS • WAREWASH • DRY CLEANERS • COMMERCIAL LAUNDRIES • COMMERCIAL OVENS • ASSEMBLY CELLS • CONTROL PANELS • DIAGNOSTICS • INDUSTRIAL & COMMERCIAL EQUIPMENT

We haven't changed the basic technology of our steam & hot water solenoid

valves in 25 years. And why should we? Our industry-leading, floating Teflon®

diaphragm is superior to any piston design. Its Class H coils offer the ultimate

temperature protection. Not to mention 25 years of repair parts consistency.

Together, we can keep a good thing going without either of us running out of steam.

Steam & Hot Water Solenoid Valves


Steam & Hot Water Solenoid ValvesRange

Port Sizes (NPT) 3/8" 1 1/2"

Orifice Sizes 7/16" 1 1/4"

Pressure Rating Vacuum 150 psiFlow Factors (Cv) 2.5 22.5Media Temperature 32°F 353°FAmbient Temperature 32°F 150°FFunction 2-Way, Normally Closed, Normally OpenBody Material Stainless Steel, BrassApplication Specific Internal Strainer, Teflon® & EPDM Seals

Low Power Solenoid ValvesParker FCD offers a wide range of low power valves (0.6 – 1.5 watts), including

intrinsically safe configurations for hazardous locations. Well suited for

installations where energy conservation is desired, they're compatible with

Programmable Logic Controllers and Distributed Control Systems.

PHARMACEUTICAL • CHEMICAL PROCESSING • POWER GENERATION • OIL & GAS • PULP & PAPER • FOOD & BEVERAGE • FACTORY AUTOMATION

Together, we can minimize energy costs while wemaximize criticalflow control.


Low Power Solenoid ValvesRange



Pressure Rating Vacuum 150 psiFlow Factors (Cv) 0.02 7.3Media Temperature 32°F 167°FAmbient Temperature -40°F 150°FFunction 2-Way, 3-Way, 4-WayBody Material Stainless Steel, Brass, AluminumApplication Specific Direct NAMUR Mount, Intrinsically Safe,

Certified SIL 3 Capable

FACTORY AUTOMATION • CHEMICAL PROCESSING • POWER GENERATION • OIL & GAS • PHARMACEUTICAL • PULP & PAPER • FOOD & BEVERAGE • INDUSTRIAL & COMMERCIAL EQUIPMENT

Parker FCD offers a complete family of products for all industrial-process

applications, including on/off valves for safety shut off, proportional valves

for precise flow control, and vortex flow meters. Parker FCD also provides

a complete line of 3- & 4-way pilot actuation valves.

Together, we can control all the industrial-process world's critical applications.

Process Valves



On/Off and Proportional Control Valves

3-Way and 4-Way Solenoid Valves

Flow Meters

RangePort Sizes (NPT) 3/8" 3.0"Orifice Sizes 0.59" 3.15"

Pressure Rating Vacuum 580 psiFlow Factors (Cv) 0.5 133Media Temperature -22°F 392°FAmbient Temperature -22°F 400°FFunction Piston & Diaphragm Actuated, On/Off, Proportional ControlBody Material Stainless Steel, Brass, BronzeApplication Specific Severe Environment, Electric Position Indicators,

Stroke Limiters

RangePort Sizes (NPT) 1/8" 3/4"


Pressure Rating Vacuum 1,100 psiFlow Factors (Cv) 0.02 7.3Media Temperature -40°F 240°FAmbient Temperature -40°F 167°FFunction 3-Way — Normally Open, Normally Closed, Universal

4-Way — Normally Open, Normally Closed, Dual PositionBody Material Stainless Steel, Brass, AluminumApplication Specific Quick Exhaust, High Pressure, Direct NAMUR Mount,

Manual Reset, Certified SIL 3 Capable

RangePort Sizes (NPT) 1/4" 2.0"Pressure Rating Vacuum 300 psiFlow (GPM) 4 200Media Temperature 35°F 150°FFunction Vortex Flow MeterBody Material Stainless Steel, BronzeApplication Specific Selectable Alarm State (N.C. / N.O.), Set Point or Pulse

Output, U.S. or Metric Units Readouts

MOTION CONTROL • INSTRUMENTATION • LIFE SCIENCE • FOOD & BEVERAGE • TRANSPORTATION • ASSEMBLY CELLS • CONTROL PANELS • DIAGNOSTICS • SPRAYING SYSTEMS • COMPRESSORS • FUEL DISPENSING

Together, we can increase customer satisfaction by reducing installation, testing costs, and time.

Parker FCD has really enhanced the market on manifolds for motion

control, instrumentation boxes, dispensing liquids, and much more.

From standard to custom designs, our wide variety of sizes and styles

help reduce leak points and provide ease of installation and service.

Manifolds for Solenoid Valves


Manifolds for Solenoid ValvesParameter OptionsMaterial SST, Aluminum, Plastics, Brass...

Port Size 1/4" NPT, NAMUR, Custom Stations Standard 1 – 8, Custom

RangePort Sizes (NPT) 1/4" Custom


Pressure Rating Vacuum 950 psiFlow Factors (Cv) 0.02 0.38Media Temperature -40°F 240°FAmbient Temperature -40°F 150°FFunction 2-Way, 3-WayManifold Material Stainless Steel, Brass, Aluminum, PlasticApplication Specific Standard 1–8 Stations, Custom Design

Custom Solutions

Together, we can stir up a solution for your application with the right blend of expertise and creativity.

When your application calls for something beyond the norm, we can engineer

a custom solution especially for you, to help you be highly competitive in your

particular industry. From the simple to the complex, trust your custom

application needs to the talented and creative engineering experts at Parker.

FOOD & BEVERAGE • TRANSPORTATION • IRRIGATION • LIFE SCIENCE • INSTRUMENTATION • DIAGNOSTICS • FUEL DISPENSING • INDUSTRIAL & COMMERCIAL EQUIPMENT • CONTROL PANELS


Custom Solutions

Providing robust solutions in demanding environments.

Bundling multiple technologies into a single, ready-to-use package.

Controlling and blending multiple media, resulting in an optimized system performance.

PHC-1000 sellsheets2-24

Documents