SLS - SCALABLE LAB SYSTEM TM • Ability to alternate between five milling solutions in seconds • Utilizes Smart-Detect, a unique lab equipment feature that automatically ensures the appropriate scalable speed range is fixed by recognizing the head being installed • PSD and capacity scalable with simple operating parameters transfer from small sample R&D tests, to full-scale production machines • Suitable for dry milling and/or wet material conditioning, as stand- alone or to complement lab-scale wet granulation systems • Process samples as small as 5 grams with minimal loss or product retention, or as large as +100 kg/hr for certain products & models • 95%+ product recovery QUADRO ® COMIL ® U5 AND U5 HIGH-EFFICIENCY • In-line, spacerless design • Tight particle granulometry • Wide range of scalable screens/impellers • Low heat, fines, dust and overs FITZMILL L1A • Same process advantages of larger scale FitzMill comminutors – fully scalable • Available metered feed system (VFS) for complete process repeatability QUADRO ® FLEXSIFT S5 • In-line security screener • High capacity (typical 500 kg/hr) • Standard deagglomeration spoiler arm QUADRO ® H 5 HIGH ENERGY COMIL ® • Primarily APIs, fine chemical and cosmetic applications • Narrow PSDs with 30-70% more on-target • Integrated feed system for optimized containment and predictability SPECIFICATIONS COMIL ® U5 CAPACITIES 50 g to 150+ kg/hr RPM up to 6500 MOTOR ¾ HP (0.5kW) PSDs d50 150-300 µm d90 300-2000+ µm SPECIFICATIONS FITZMILL L1A CAPACITIES 5 g to 50+ kg/hr RPM up to 15000 MOTOR ¾ HP (0.5kW) PSDs d50 20-150 µm d90 60-2000 µm SPECIFICATIONS FLEXSIFT S5 CAPACITIES <125-2500+ kg/hr RPM up to 2200 MOTOR ¾ HP (0.5kW) MESH SIZE min 150 µm (100 mesh) max 6.4 mm (0.25") SPECIFICATIONS COMIL ® H 5 CAPACITIES <1 kg to 100 kg/hr RPM up to 12800 MOTOR ¾ HP (0.5kW) PSDs d50 20-150 µm d90 60-300 µm MPT PHARMA PROCESSING Nutraceutical, Food & Flavours Process Equipment MPT PHARMA PROCESSING Nutraceuticals | Food | Flavours MPT PHARMA PROCESSING SLS - Scalable Lab System TM High Efficiency Size Reduction, Milling and Powder Processing High Capacity Security Screening and Deagglomeration Nutraceuticals 2016 ABOUT QUADRO & FITZPATRICK With Quadro and Fitzpatrick products, you can rely on superior engineering and manufacturing quality for maximum uptime and yield. Our products are backed by the highest level of application, technical support, and experience. 613 Colby Drive, Waterloo, ON, CA N2V 1A1 [email protected] www.quadro.com fi[email protected] www.fitzmill.com MATERIAL PROCESSING SPECIFICATIONS UNDERDRIVEN COMIL ® MODEL U3 U5 U10 U20 U30 CAPACITIES* lb/hr kg/hr from 25 gm 425 195 850 390 4250 1950 8500 3900 MINIMUM INLET TO OUTLET HEIGHT inches mm 9 229 11 179 10.5 267 14.5 368 19.5 495 SCREEN DIAMETER inches mm 2.55 65 3.25 83 5 127 8 203 12 305 POWER Hp kW 0.33 0.246 0.5 0.375 2 1.5 5 4 10 7.5 SCALE-UP FACTOR 0.5 1 2 10 20 *Results are product dependant. SPECIFICATIONS OVERDRIVEN COMIL ® MODEL 197 194 196 198 199 CAPACITIES* lb/hr kg/hr 800 360 4000 1800 8000 3600 16,000 7200 32,000 14,400 SCREEN DIAMETER inches mm 5 127 8 203 12 305 24 609 30 761 POWER Hp kW 2 1.5 5 4 10 7.5 20 15 30 22 SCALE-UP FACTOR 1 5 10 20 40 *Results are product dependant. SPECIFICATIONS QUADRO ® FLEXSIFT MODEL S5 S10 S20 POWER Hp (kW) 1 (0.75) 2 (1.5) 5 (4.0) RPM 700 - 1400 700 - 1400 700 - 1400 APPROXIMATE SCREEN DIAMETER inches mm 3.25 82.6 5.25 133.4 8.0 203.2 SCALE-UP FACTOR 1 2 4 SAMPLE PRODUCTS - FLEXSIFT S20 MODEL* SCREEN DIAMETER inches (mm) Kg/Hr SUGAR 0.094 (2.4) 0.125 (3.2) 10,000 15,000 LACTOSE 0.045 (1.1) 17,500 COFFEE WHITENER (50% FAT) 0.062 (1.6) 7500 COCOA POWDER 0.062 (1.6) 6300 FOOD FLAVOURING 0.039 (1.0) 5000 SODIUM BORATE 0.018 (0.5) 0.075 (1.9) 3900 16,800 GLUCOSAMINE SULFATE 0.075 (1.9) 1600 *Results are product dependant. In-line flavours and fragrances size reduction Model 198 powder milk bulk density fine-tuning Dump bag security screening stations Flavours security screening In-line dispensing