This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Major New Features a) Improved the communication between the smart flight battery and the Phantom. b) Fixed issues in communication between the smart flight battery (V2.0) and the compass.
Firmware Updates on October 31
Overview:
a) DJI Smart Battery Flight firmware updated to v2.6.0.0 b) DJI Phantom Assistant updated to v3.6.
Major New Features a) Battery cell warning added to the VISION app that alerts users if battery issues are detected. Browse
battery cell warning history in the VISION app. b) New auto-discharging feature to address to address the swelling problem of fully charged battery when
it is stored for an extended period. The auto-discharging function will start automatically if the battery does not operate in 10 days.
c) Battery cell damages detection feature added. d) New battery cell balancing feature to extend battery life.
Special Notes:
a) Update DJI Smart Flight Battery firmware to v2.6 through Phantom Assistant v3.6. b) The new battery firmware v2.6.0.0 does not support battery with loader of v1.3.0.0 or firmware of
e) DJI Vision App updated to iOS v1.0.43, Android v1.0.54.
Major New Features a) Dynamic home point: when using a GPS-enabled mobile device and running the VISION app, the Home
Point will automatically be reset to the location of the device every 2 seconds during flight. b) Ability to change the Return to Home altitude added to the VISION app (ability to change this setting in
the Assistant software remains). c) Maximum operating area, based on remaining battery power and current settings, can now be displayed
on the ground station map view. This area automatically expands or contracts when new flight plans are set. d) The aircraft’s current longitude and latitude will be displayed on the VISION app’s radar. When using
ground station, the longitude and latitude of each waypoint is also displayed as they are set. e) New pre-flight checklist that reminds users of important considerations before flying added. f) Battery cell warning added to the VISION app that alerts users if battery issues are detected. Browse
battery cell warning history in the VISION app. g) To address the issue of fully charged battery swelled when it was stored for an extended period.
h) Battery cell damages detection feature added.
i) New battery cell balancing feature to extend battery life. j) Maximum descent speed set to 0.6m/s when the aircraft’s altitude is less than 10m and descending
automatically (for example in failsafe mode). The maximum speed of descent remains 2m/s in other flight conditions.
k) Propulsion system performance enhancements. l) German, French and Japanese language support added to the VISION app.
Special Notes:
a) The dynamic home point is only available when using GPS-enabled mobile devices. Your aircraft will not be able to record a dynamic home point if you are using a mobile device without a GPS module (e.g. iPod).
Firmware Updates on July 29
Overviews:
a) Flight controller firmware updated to v3.06.
b) Central board firmware updated to v1.0.1.32.
c) DJI Vision App updated to iOS v1.0.42 and Android v1.0.52.
a) Added two levels of battery warnings: Low Battery Level Warning and Critical Battery Level Warning.
When enabled, Auto Go Home will be activated if the battery level reaches a Low Battery Level
Warning. Setup these warnings using either the DJI Phantom Assistant or DJI Vision App.
b) When the battery level reaches a Critical Battery Level Warning, the aircraft will automatically land. The motors will power off after landing.
c) The speed of descent will be automatically adjusted based on current altitude. d) Minimum adjustable height limit set to 20m. e) Magnetic declination value stored to improve flight course accuracy. f) New fix of a video signal problem that affected some Phantom 2 Vision users. g) Various bug fixes.
DJI Vision App Major New Features:
a) The current battery level can now be viewed real-time through the DJI Vision App, via a battery level
indicator bar near the top of the screen.
b) “Hotline” feature for easy access to post-sales supports.
c) “Compass Calibration” feature added.
d) “Low Battery Auto Go Home” feature added.
Phantom 2 PC Assistant Major New Features:
a) Added Japanese as a supported language.
Firmware Updates on July 01
Overviews:
a) Central board firmware updated to: v1.0.1.31.
Major New Features:
a) Fixed iOSD compatibility issues.
Special Notes:
a) Ensure flight controller firmware has been updated to the latest version (v3.04) before you start to
a) Fixed issue of vision+ gimbal and H3-3D shaking involuntarily when powering on.
Firmware Updates on June 24
Overviews:
a) DJI Vision App updated to iOS v1.0.41 and Android v1.0.50.
Major New Features: a) Ground Station support:
Plan missions of up to 16 waypoints. “Go Home” function. Flight safety protection:
3.1 miles (5 km) flight distance limit. Ground station disabled when battery level is below 30%. 1640 feet (500 m) flight radius based on HOME point, 656 feet (200 m) altitude restriction.
Special Notes:
a) Upgrade flight controller firmware to the latest version (v3.04) by using Phantom Assistant to enable
ground station feature.
Firmware Updates on May 21
Overviews:
a) Flight controller firmware updated to: v3.04.
Major New Features: a) Stability when carrying heavy payloads improved.
b) Flight restriction database updated.
Firmware Updates on April 30
Overviews:
a) Central board firmware updated to: v1.0.1.27.
Major New Features:
a) Stability when carrying heavy payloads improved. Maximum descent speed restricted to 2m/s.