PGL-eDP PANEL TESTER & PGL-NLED Feature might be changeable, according to revised function etc. PGL-eDP
PGL-eDP PANEL TESTER & PGL-NLED
Feature might be changeable,
according to revised function etc.
PGL-eDP
Easy Carriage With & Without PC. (Even without PC, it is workable !
Wide range of LCD /LED panels and their final assembled products
One(1) Package Multi Use, Cost Reduction with Simple Testing Procedure
Variable Working Area
2
**. PGL Tester’s Strong Points & Variable Area
Aging Room Chamber
Local Service Center
Wide Warranty & Repairing Production Sites
Production Line
Easy Carriage with Portable Size
Model Resolution Interface Target
LCD Panel # Product Image
PGL-eDP
1920*1080 (FHD )
eDP 4 Lane
Laptop CLAA156WA07A LP173WF2 TPB1
2560*1440 (QHD)
DP Monitor LM270WQ1
2560*1024 (Retina)
eDP 4 Lane
Tablet (New iPad etc.)
LP097QX1-SPA1
1366*768(HD) 1600*900(HD+) 1920*1200(FHD+) 1920*1080 (FHD) 1440*900 1792*768 1680*1050
eDP 1,2 Lane
Laptop Tablet
-
3
1-1. PGL-eDP ‘s Testing Coverage
1-2. PGL-eDP ‘s Feature
4
Can output LCM Test’s pattern as type with or without PC and other equipments. Slim & Portable Size (160mm x 120mm x 30mm)
Can cover Max. 2560 x 1440 ( resolution) / iPad eDP with 2048*1536 eDP 1, 2, 4 Lane , 18bit / 24 bit (60Hz, 120Hz) Can be indicated “ LCM EEPROM Checksum” Alternative VLCD Voltage : 3.3V / 5V / 12V ESD Protection Circuit PWM Frequency 200Hz , PWM Duty can be variable 0~100%. EEPROM Readable/Writable/Comparable (as option) Can Test varied monitors with 60 installed Patterns, incl. 2pcs of 3D
patterns.(expected to increase in) Auto Run -> Prevention “afterimage”, when LCM Aging Test -> Delay Time Adjuster is available, one pattern to the other pattern Specially, when testing Tablet Display from Retina, 3D etc., PGL series’ tester could fully help you better !
5
Interface Cable eDP Cable with eDP Panel
Through PGL-NLED
PGL eDP Tester
PGL-eD
P
1-3. PGL-eDP ‘s Feature
Through eDP Gender
OR
OR
Indicator for LCM Model (Hex code)
Pattern Number / Indicator for EDID Check Sum
LCM Model Selection Switch
Button for Pattern Changing / PWM DUTY
PC Control Socket(RS-232) EEPROM / EDID
Auto run DC 12V(Input)
2. PGL-eDP Tester’ s Function (eDP)
6
PGL-eDP
1 2. Indicator for Pattern Number Displays Pattern Number outputted on the current screen. And, when selecting PWM Button, it is displays the value of PWM Duty. . 3. LCM Model Selection Switch It is using, when selecting LCM Model.
1. Indicator for LCM Model(Hex code) It is 7-segment LED as showing “3 digit”, which is LCD Module’s horizontal resolution information by selected DIP switch.
2
3
4
2. PGL-eDP Tester’ s Function (eDP)
8
4. Pattern Change Button Press the UP/DOWN button to change “ Pattern” & “ value of PWM Duty”. PWM Duty can be variable 0~100% , when pushed “button” with a long time, it can be increased in or decreased in.
2. Auto run operating Switch When LCM Aging LCM, automatically, pattern by the other pattern is changed. Pattern Timing is adjusting “ switch”. When showing “0”, it’s operation is off. It is possible to adjust “time” from 1 Sec. to Sec. 9 Sec. When changing Pattern, LED is lightening.
4. PC Control Socket (PC S/W Program is supplied separately.) It is using, when controlling by PC, including changing LCM bit or VESA/JEIDA. It is using , when changing or installation value for H/V total, blank from basic model’s Timing.
1. Power Input Socket It is DC 12V Input Socket. LED is turn on, when switch on in the left side.
1 2 3 4
9
2. PGL-eDP Tester’ s Function (eDP)
PGL-eDP
3. LCM EEPROM Read Button When pushed “button”, less than 1sec., it can be read the EDID Check Sum. When pushed “ button” more than 1sec., it can be shown to PWM Mode.
11
Pattern NO. No.13 No.15 No.21 Name Gray_127 Gray_255 Red_127
Pattern Form
Pattern NO. No.24 No.28 No.08 Name Green_127 Blue_127 Gray_0
Pattern Form
Pattern NO. No.14 No.19 No.22 Name Gray_200 Red_255 Green_255
Pattern Form
4. GROUP 1 Patterns
12
Pattern NO. No.26 No.09 No.10 Name Blue_255 Gray_16 Gray_32
Pattern Form
Pattern NO. No.11 Name Gray_64
Pattern Form
4. GROUP 1 Patterns
13
Pattern NO. No.1 No.2 No.3 Name WINFCC Pattern LG Pattern Dell Pattern
Pattern Form
Code 000(HEX) 010(HEX) 020(HEX)
Pattern NO. No.4 No.5 No.6 Name WINFCC Pattern LG Pattern Vertical Gray
Pattern Form
Code 000(HEX) 010(HEX) 020(HEX)
Pattern NO. No.7 No.8 No.9 Name 8 Color Bar Gray_0 Gray_16
Pattern Form
Code 030(HEX) 040(HEX) 050(HEX)
4. GROUP 2 Patterns
14
Pattern NO. No.10 No.11 No.12 Name Gray_32 Gray_64 Gray_85
Pattern Form
Code 060(HEX) 070(HEX) 080(HEX)
Pattern NO. No.13 No.14 No.15 Name Gray_127 Gray_200 Gray_255
Pattern Form
Code 090(HEX) 0A0(HEX) 0b0(HEX)
Pattern NO. No.16 No.17 No.18 Name Line Black_White Check 8x6 SMPTE Color Bar
Pattern Form
Code 0C0(HEX) 0d0(HEX) 0E0(HEX)
4. GROUP 2 Patterns
15
Pattern NO. No.19 No.20 No.21 Name Red_255 Red_191 Red_127
Pattern Form
Code 0F0(HEX) 100(HEX) 110(HEX)
Pattern NO. No.22 No.23 No.24 Name Green_255 Green_191 Green_127
Pattern Form
Code 120(HEX) 130(HEX) 140(HEX)
Pattern NO. No.25 No.26 No.27 Name Green_64 Blue_255 Blue_191
Pattern Form
Code 150(HEX) 160(HEX) 170(HEX)
4. GROUP 2 Patterns
16
Pattern NO. No.28 No.29 No.30 Name Blue_127 Gray_64 Red 255 Bar
Pattern Form
Code 180(HEX) 190(HEX) 1A0(HEX)
Pattern NO. No.31 No.32 No.33 Name Green 255 Bar Blue 255 Bar RG255 Bar
Pattern Form
Code 1b0(HEX) 1C0(HEX) 1d0(HEX)
Pattern NO. No.34 No.35 No.36 Name RB 255 Bar GB 255 Bar RGB 255 Bar
Pattern Form
Code 1E0(HEX) 1F0(HEX) 200(HEX)
4. GROUP 2 Patterns
17
Pattern NO. No.37 No.38 No.39 Name Concentric BW Gray64_Black Gray127_Black
Pattern Form
Pattern NO. No.40 No.41 No.42 Name Gray191_Black Gray255_Black Gray0_White
Pattern Form
Pattern NO. No.43 No.44 No.45 Name Gray64_White Gray127_White Gray191_White
Pattern Form
4. GROUP 2 Patterns
18
Pattern NO. No.46 No.47 Name 3D R/L 3D L/R
Pattern Form
Code 2A0(HEX) 2B0(HEX)
4. GROUP 2 Patterns
When testing with Variable Latest eDP Panels ;
eDP Panel
19
eDP 1, 2 Lane
PGL-eDP
5. PGL- eDP ‘s Target Model List
eDP 4 Lane
DC 12V Adaptor
eDP 4 Lane Cable
PGL-eDP
Target Panel : FHD – eDP 4 Lane Panel , (Max. 2560*1440)
*. FHD Model as example ;‘ CLAA156WA07A, LP173WF2 TPB1
5. PGL- eDP ‘s Target Model List
20
Target Panel : QHD – DP Monitor (2560*1440, 2560*1080 etc.)
DP 4 Lane Cable
QHD DP Monitor panel
Cable (Between PGL & Panel )
27.0” QHD TFT LCD as example
PGL-eD
P
LM270WQ1 ( Buyer : APPLE etc.)
5. PGL- eDP ‘s Target Model List (Planned)
21
Target Panel : New iPad (2560*1024)
eDP 4Lane Cable
New iPad
New iPad cable, built in LCM
PGL-NLED
Cable A (Between PGL & LED Drive)
Cable B (Between LED Drive & Interface Board with a new iPad
Interface Board for new iPad
PGL-eD
P
LP097QX1-SPA1
5. PGL- eDP ‘s Target Model List (Planned)
22
23
When testing variable laptop PC panels, which is not built in LED drive from LCM.
*. PGL- eDP ‘s Interface Card (PGL-NLED)
23
W/O LED DRIVE Laptop PC LCD
Multi LED DRIVE
Not Built in LED DRIVE
LCD Structure
25
PGL-eD
P
25
*. PGL- eDP ‘s Interface Card (PGL-NLED)