Peugeot307

YOUR 307 AT A GLANCE


13. Windscreen demisting1. Driver's airbag.vents.Horn.

26. Gear lever.14. Speaker (tweeter)2. Lights and directionlocation.indicators stalk.

27. Cup / can holder.15. Side window demisting3. Audio remote control

vent. 28. Handbrake.stalk.

16. Side adjustable heating/ 29. Rubbish container.4. Instrument dials. ventilation vent and airflow regulation.

30. Coin storage.5. Windscreen wash-wipe Passenger air bagstalk. 17. Passenger air bag. disarming switch.Trip computer stalk.

18. Glove box. 31. Steering lock and ignition.6. Alarm button.

19. RB3, RD3 audio 32. Steering wheel7. Central locking button. equipment. adjustment control.

8. Hazard warning lights 20. Heated seat switches. 33. Fuse box.switch.

21. CD changer. 34. Electric mirror controls.Window controls.9. Multifunction display.Rear window locking22. Heating / air conditioning control.controls.10. Brightness sensor.

35. Headlamp height23. Front ashtray.11. Dynamic Stability control adjustment.(ESP/ASR) switch*.

24. Rear footwell heating 36. Cruise control.vent.12. Central adjustable hea-

ting/ ventilation vent and25. 12 V accessories socket.air flow regulation. * During the year.


The remote control keyLocking Unlocking➜ Press button A to lock the Press button B to unlock the

vehicle.vehicle.This is confirmed by fixed This is indicated bylighting of the direction indi- rapid flashing of thecators for approximately two direction indicators.seconds. 65Note : If the vehicle is

Note: a long press on button A, locked and unlockingTHE KEYS in addition to deadlocking, automa- is activated inadvertently withouttically locks the windows* and the the doors being opened withinThe keys allow you to switch on thesunroof*.ows* and the sunroof*. 30 seconds, the vehicle will lockignition and to independently

automatically.operate the front doors, the fuel filler Vehicles fitted withcap, the glove box and the deadlocking*

STARTINGpassenger air bag disarming switch.Deadlock ing* renders theinternal and external door STOP position:lock ing controls inoperative. the ignition is off.

1st notch, Accessories position:the ignition is off but the acces-➜ Press button A to deadlockCentral lockingsories can be used.the vehicle.

From the driver's door, the keys 2nd notch, Running position:This is indicated by the directionallow you to lock, deadlock* or the ignition is on.indicators lighting continuouslyunlock the doors and the tailgate Starting position:for approximately two seconds.and to fold back the exterior mir- operates the starter.Note : a long press on button Arors*. permits automatic closing of teh

windows*and the sunroof*, inIf one of the doors or the boot isaddition to deadlocking.open, it is impossible to operate

the central locking; a bleep indi- A second press on button A incates locking by remote control. the five seconds following dead-

locking, changes deadlocking toThe remote control performs normal locking. This is indicatedthe same functions at a distance. by the direction indicators ligh-ting continuously for approxima-tely two seconds, accompaniedby a brief sound of the horn.

* According to specification


STEERING WHEEL Vehicles fitted with a rear foglamp (ring B) WINDSCREEN WIPERSSTALKS

FrontRear fog lamp.LIGHTING2 Rapid wipe (heavy rain)Front and rear lights (ring A)1 Normal wipe (moderately

heavy rain)Lights off. AUTO Automatic wipe*

0 StopSingle wipeVehicles fitted with front fog

lamps and a rear fog lampSide lights on. Wash-wipe: pull the stalk(ring C) towards you.

RearFront fog lamps (first rota-Dipped/ main tion of the ring forwards). Stop Intermittent Wash-beam headlamps wipe wipeon.Automatic switchingon of lights* Front fog lamps

and rear fog lamp(second rotation ofFront fog lamps * and rear fog Automatic wipe*the ringlamp forwards) In the AUTO position,

Turn the ring towards the front to the system automaticallyswitch on and towards the rear to adjusts the wiper timingswitch off. The on/off status is to the intensity of the72 74shown by the indicator light on rainfall.

* According to specificationthe instrument panel.


FRONT SEATS

1. Forwards-backwardsadjustment.

2. Access to rear seats(3 door).

3. Seat back angle adjustment.

4. Driver or passenger* seatheight adjustment.

5. Front heated seats switch*.

6. Front removable armrest*(5 door).

7. Head restraint height andangle adjustment.

To raise or lower the headrestraint, pull it forwards, sli-ding it at the same time.

Never drive with thehead restraints removed.

8. Storage drawer*.

58* According to specification


REAR SEATS

To fold down the rear left seat (2/3 part) or right seat (1/3 part):Always start with the cushion, never with the seat back (there is a risk of damage):

Move the seat(s) forward if necessary,Lift the front of the seat 1,Tilt the seat 1 against the front seat(s),Check that the seat belt is in the correct position on the side of the seat back,Pull control 2 to unlock the seat back 3,Place the head restraints in the low position,Tilt the seat back 3.

When refitting:

Fold down the seat back and lock it (the red marker of control 2 must not be visible at this point),Fold down the cushion.

Take care not to trap the seat belts.60


Disarming the passenger Operating checkAIR BAGSair bag*➜ with the ignition off, insert the With the ignition switchedThe air bag system has been desi-

on (2nd notch on the key),key into slot 1 and turn thegned to maximise the safety of thethe warning light comingpassenger air bag switch tooccupants in the event of seriouson, accompanied by anthe "OFF" position.collisions. It works in conjunction

audible signal and the messagewith the force limiting seat belts."Passenger air bag disarmed"As soon as you remove the child on the multifunction display, indi-

seat, turn the air bag switch to the cates that the passenger air bag isFront air bags "ON" position, to activate the air disarmed ("OFF" position).bag again.These are folded in the centre of The warning light remains on

the steering wheel for the driver throughout the disarming process.and in the fascia for the frontpassenger. They are deployedsimultaneously, except in cases Side air bags* and curtain airwhere the passenger air bag is bags**disarmed.

Side air bags are incorporatedinto the front seat back frame, onthe door side.Precautions regarding theCurtain air bags are incorporatedpassenger air baginto the door pillars and the top ofthe passenger compartment.

➜ disarm the air bag if you ins- They are deployed independentlytall a rear facing child seat, of each other, depending on

➜ activate the air bag for an which side the collision occurs.adult passenger.

* According to country.91 92** According to specifi-

cation.


ELECTRIC WINDOWS STEERING WHEEL HEIGHTAND DEPTH ADJUSTMENT1. Driver's electric window

2. Passenger's electric window.3. Rear right electric window*.4. Rear left electric window*. ➜ Pull handle A to unlock the5. Disarming the rear window switches*. steering wheel.Manual mode: Automatic mode*: ➜ Adjust the height and depth of

the steering wheel.➜ Press or pull the switch lightly. ➜ Press or pull the switch firmly.➜ Lock it by pushing handle A inThe window stops as soon as One touch completely opens

fully.the switch is released. or closes the window.

Safety auto-reverse*: When the driver's window is closing andmeets an obstacle, it stops and lowersagain.

78ELECTRIC MIRRORS*➜ Turn button 6 to the right or left When parking the vehicle, the

mirrors can be folded backto select the correspondingmanually, electrically* bymirror.pulling button 6 rear-➜ Then move the button 7 in allwards or automatically*four directions to adjust.on locking the vehicle.➜ Turn button 6 back to the

centre position. 79 80* According to specification


OPENING THE BONNET

Inside the vehicle: Push theFILLING WITH FUEL handle on the left side, under thefascia.This operation must be carried out with the engine switched off.

➜ Open the fuel filler cap.➜ Insert the key then turn it to the left.➜ Remove the cap and hook it onto the clip on the inside of the flap.A label on the inside of the flap shows which type of fuel to use.When you fill your tank, do not continue after the third cut-off of the pump.This could cause a malfunction.

The capacity of the tank is approximately 13 gallons (60 litres).➜ After filling the tank, lock the cap and close the flap.

O u t s i d e the vehicle:Lift the catch, raise theLow fuel level warning light bonnet and secure thestrut to keep the bonnetFrom the time this light comes on, the range

71 71open.remaining is approximately 30 miles (50 km).


AUTOMATIC GEARBOX "PORSCHE TIPTRONIC SYSTEM"The four speed automatic gearbox offers a choice between the comfort ofautomatic integral regulation enhanced by a sport and snow programme,or the pleasure of manual gear changing.

Moving OffGear selection gateWith the engine running, to move➜ Move the lever in the gate to select one of the functions.off from position P:

Once the function is selected, the indicator light for that function is ➜ It is essential to press thedisplayed on the instrument panel screen.brake pedal to exit positionP,

➜ Select the function required R,S : sport programme. D or M, then gradually release

snow programme. the pressure on the brakepedal; the vehicle will move

Park: to park or to start the engine, with the off immediately.handbrake on or off. You can also move off from posi-

tion N:Reverse: to reverse (select this function with thevehicle stationary and the engine at idle). ➜ Release the handbrake, with

your foot on the brake.Neutral: to start the engine or to park, with the➜ Select function R, D or M thenhandbrake on.

gradually release the pressureNote: if position N is engaged by mistake while the on the brake pedal; the vehiclecar is moving, allow the engine to return to idlingwill move off immediately.speed before engaging function D to accelerate.

Drive: for automatic gear changing. When the engine is idlingw i t h the brakes notManual: for manual gear changing. applied, if function R, Dor M is selected, the

vehicle moves without the acce-To change the four gears manually: lerator being pressed.➜ Push the lever to the + symbol to change up to the next gear and pull For this reason, do not

the handle towards the - symbol to change down to the next gear. leave children unatten-ded inside the car, with

(snow) programmes do not operate when inNote: the S (sport) and the engine running.manual mode. 86


HEATING /AIR CONDITIONING

N° Symbol Function

Setting the air1 distribution.

2 Air intake control.

52Temperature3 adjustment.

Demisting the rear4 screen and mirrors.

5 Air flow adjustment.

6 Air conditioning control.

54


AUTOMATIC AIRCONDITIONING

N° Symbol Function

1 Air flow adjustment.

Setting the air2 distribution.

3 Air intake control.

Air conditioning4 control.

Demisting the rear5screen and mirrors.

6 Switching off.

Temperature7 adjustment.

Automatic comfort8 programme.

Automatic visibility9 programme.56


AUDIO RB3

36

AUDIO RD3*

38* The front panel of the RD3 set comes as either of the two configurations shown.

PEUGEOT SERVICING

PEUGEOT SERVICINGThe maintenance cycle of your 307 is based on level A (including the replacement of the engine oil, the oil filter and a setof checks) and level C services [level A service + workshop operations carried out every 40,000 miles (60 000 km)] inaccordance with the tables on the following pages.

So that the driving conditions and your style of driving, may be taken into account, your 307 is fitted with a serviceindicator which modulates the intervals for level A service:· every 20,000 miles (30 000 km) maximum or 2 years for petrol engines,· every 12,000 miles (20 000 km) maximum or 2 years for direct injection diesel engines,

The frequency of level A services specific to your vehicle will be determined by three parameters :· the number of engine revolutions,· the engine oil temperature,· prolonged periods when the vehicle is not in use.

Depending on these three elements, the service indicator will suggest a service interval which is more or less the same asthe initial programme. Depending on the conditions of use, one or more level A services may be carried out between twolevel C services.Depending on the mileage recorded, your dealer may offer to carry out the level C service to avoid the visits being too closetogether.

PEUGEOT SERVICING

The extension of the service intervals means that the engine oil must be checked regularly: topping up of the oilbetween two oil changes is normal.

It is for this reason that the PEUGEOT network is offering you an intermediate visit between regular services. Thedate of this visit is not shown by the service indicator.

It is to be carried out between two services.

A PEUGEOT professional will carry out a quick check, and will top up the fluid levels if necessary (oil, coolant, screen washup to 2 litres).

If the oil level is too low, there is a risk of significant damage to the engine: check the engine oil level at least every3,000 miles (5 000 km).

The extended service intervals have been made possible by developments to our vehicles and to the lubricants:

THUS IT IS ESSENTIAL THAT YOU USE ONLY ENGINE LUBRICANTS THAT ARE APPROVED AND RECOMMENDEDBY THE MANUFACTURER (see pages on "Lubricants").

PEUGEOT SERVICING

A few seconds after switching on the The service is overdueSERVICE INDICATORignition, the total distance recorder Each time the ignition is switched onresumes normal operation and theLocated on the instrument panel with and for a few seconds, the symboldisplay shows the total and trip dis-the total distance recorder (total and and the excess distance flash.tances.trip distances), this programmes ser-

vice intervals depending on the useof the vehicle.

Note: with the engine running thesymbol flashes until the service hasbeen carried out.

OperationA few moments after the ignition hasbeen switched on, the spanner sho-wing the service symbols lights up;the display for the total distancerecorder tells you (in round figures)the distance remaining before yournext service. The distance remaining before the

next service is less than 1000milesA few seconds after switching on theExample: 4 800 miles remain beforeignition, the total distance recorderthe next service is due. When theresumes normal operation and theignition is switched on and for a fewspanner remains lit. This indicatesseconds, the display shows:that a service should be carried outshortly.

PEUGEOT SERVICING

Zero re-set MAINTENANCE OF PARTS SUBJECT TO WEAR and a check ofconsumablesYour PEUGEOT dealer carries out

this operation after each service. Certain essential components on your vehicle are subject to checks at specificHowever, if you carry out the service frequencies:yourself, the re-set procedure is asfollows:

- The brake fluid is to be replaced at a maximum of every 36,000/40,000 miles Switch off the ignition, (60 000km) or every two years. Press and hold the trip recorder - The pollen filter must be checked at each service by a PEUGEOT dealer

re-set button, (services and intermediate visits) or more often, depending on the environment Switch on the ignition. (dust, pollution, etc.).The display begins a countdown. - For the 2 litre HDI turbo diesel engine (110 bhp), maintenance of the parti-

culate emission filter and topping up of the additive reservoir must be car-When the display shows 0, releaseried out at a maximum of every 48,000 miles (80 000 km) by a PEUGEOTthe button; the service symbol disap-dealer.pears.

- Air bags and pretensioning parts on seat belts must be replaced every10 years.Important: after this operation, if you

- The check on tyre inflation pressure must be carried out cold at least oncewish to disconnect the battery, locka month.the vehicle and wait for at least five

minutes, otherwise the zero re-setwill not be registered.

PEUGEOT SERVICING

THE SERVICE LEVELSEach vehicle has its own servicing cycle, based upon the engine type.This cycle consists of alternating 2 types of service, A and C, intermediate visits and a few additional operations specific toyour vehicle; these correspond to key stages in the life of your 307.At your first and each subsequent service, your dealer will advise you of the type and content of the next service due.

MAINTENANCE CYCLE FOR YOUR 307 PETROL ENGINE

Service every 2 years or 20 000 miles (30 000 km) maximum

MILES (KM) 40 000 (60 000) 80 000 (120 000) 120 000 (180 000)

1st service at 6 000 miles(10 000 km) or 6 months*.This is necessary in order to

benefit from the warranty. + replacement oftiming belt

Replacement of automatic gearbox oil every 40 000 miles (60 000 km).Replacement of brake fluid every 2 years or 40 000 miles (60 000km).These fixed operations are carried out with synthetically based oil. Synthetic oil orFuel economy oil may also be used.

Arduous conditions of use (corresponding section).- Replacement of air filter every 24 000 miles (40 000km).- Replacement of timing belt every 48,000 miles (80 000km). Intermediate visit included in the fixed

interval services.* Whichever comes first.

PEUGEOT SERVICING

MAINTENANCE CYCLE FOR YOUR 307 DIESEL

Service every 2 years or 12 000 miles (20 000km) maximum

MILEAGE 36 ,000 (60 000)

1st service at6,000 miles

(10 000km) or6 months*.

This is necessary in + maintenance of particulateorder to benefit emission filter

from the warranty. 2,0 l HDI 110 bhp (80 000 km)

72 ,000 (120 000) 108,000 (180 000)

+ maintenance of particulateemission filter

2,0 l HDI 110 bhp (160 000 km)

Replacement of timing belt every 100,000 miles (160 000 km) (2,0 l HDI 90 bhp/110 bhp) and every 165,000 miles(240 000 km) (1,4 l HDI 70 bhp).Replacement of brake fluid every 2 years or 36,000 miles (60 000 km).These fixed operations are carried out with synthetically based oil.Synthetic oil or Fuel Economy oil may also be used.

Arduous conditions of use (see corresponding section).- Replacement of air filter every 27,000 miles (45 000km).- Replacement of timing belt every 96,000 miles (120 000km). Intermediate visit included in the fixed

interval services.* Whichever comes first.

PEUGEOT SERVICING

ARDUOUS CONDITIONS OF USE

· Continuous door-to-door use.

· Town use (e.g. taxi).

· Repeated short journeys, with the engine cold at low temperatures.

· A prolonged stay under the following conditions :

countries with temperatures often above +30 °C,

countries with temperatures often below -15 °C,

countries with a dusty atmosphere,

countries whose lubricants or fuels do not conform to our recommendations.

PEUGEOT SERVICINGPEUGEOT SERVICING: A AND C SERVICE LEVELS AND THE INTERMEDIATE VISIT

LevelOperations Description of operation 1st service A C Intermediate-- Engine oil.DRAIN/REFILL - Bleed fuel filter (diesel).- Oil filter.

R Fuel filter (petrol).-EPLACE - Fuel filter element (diesel).- Air filter element.- Spark plugs (petrol).- Engine oil (check + top-up).- Manual gearbox oil (check + top-up).

L Battery (check + top-up) if cap is removable.-EVEL - Screen wash (check + top-up).- Coolant (check + top-up).- Brake fluid (check + top-up).- Power steering fluid (check + top up according to specification).- Operation of lights and indicators.- Condition of glass, headlamp and light lenses and mirrors.- Horn.- Windscreen washer jets.- Condition of wiper blades.- Condition and tension of the ancillary drive belts.- Handbrake.

C Condition of hydraulic circuits (hoses and covers).-HECK - Condition of rubber boots and gaiters.- Brake pads.- Play in hubs, link rods, ball joints, flexible mountings.- Shock absorbers.- Rear drum brake lining wear.- Condition and pressure of tyres (including spare wheel).- Emission control check as per current legislation (petrol).- Smoke opacity (diesel).- Pollen filter (according to specification).

S Visual check of the whole vehicle.R ERVICE - Courtesy vehicle.

: OAD TEST: Arduous conditionsAll driving conditions

PEUGEOT SERVICING

RECOMMENDATIONS FORAPPROVED LUBRICANTSThe oils which appear in the tableopposite are suitable for most pur-poses.The diagram opposite states theoptimum range of viscosity depen-ding on the temperatures at whichthe oils are to be usedIt is also possible to use "superiorquality" synthetic oils.In the absence of semi-synthetic orsynthetic oils, oils of API SH/SJ qua-lity (for petrol engines), or CD/CF (fordiesel engines) may be used by fol-lowing the "Arduous Conditions" ser-vicing schedule which specifies shor-ter intervals.Do not hesitate to ask for advice ONLY ONLYfrom a PEUGEOT dealer to maintain Manual ESSO GEAR OIL BV TOTAL TRANSMISSION BVdriving pleasure and to minimise the Gearbox 75W80 PR 9736.41 75W80maintenance cost of your vehicle.For countries outside Europe, please AL4 ONLYcontact a local PEUGEOT dealer. Automatic ATF 4HP20-AL4

Gearbox PR 9736.22

Other approved products

Power steering FLUIDE DA PR 9730.A1

Brake fluid PEUGEOT DOT4

PROCOR TM108/GLYSANTIN G33 or REVKOGEL 2000CoolantONLY Protection to minus 35C

INSTRUMENTS AND CONTROLS

14 - Air bag warning light.

15 - Passenger air bag disarmingindicator light.

16 - Speedometer.

17 - Service indicator, oil level andtotal distance recorder.

18 - Trip recorder zero reset.

19 - Rear fog lamp indicator light.

20 - (ESP/ASR) warning light*

21 - Front fog lamps indicator light*.

22 - Diesel engine preheating light.INSTRUMENT PANEL DIALS: PETROL / DIESEL1 - Rev counter. 7 - Battery charge warning light. 23 - Main beam headlamps indicator light.

2 - Seat belt not fastened warning light. 8 - Central (STOP) warning light. 24 - Low coolant level warninglight*.

3 - Engine autodiagnostics warning 9 - Engine oil pressure warning light.light. 25 - Dipped beam headlamps

10 - Low fuel level warning light. indicator light.4 - Handbrake and low brake fluid

level warning light. 11 - Right-hand direction indicator. 26 - Water in diesel filter warninglight*.

5 - Left-hand direction indicator. 12 - Fuel gauge.27 - Lighting rheostat.

6 - Coolant temperature indicator. 13 - ABS warning light.* According to specification.


14 - Air bag warning light.

15 - Passenger air bag disarmingindicator light.

16 - Speedometer.

17 - Service indicator, oil level andtotal distance recorder.

18 - Trip recorder zero reset.

19 - Rear fog lamp indicator light.

20 - (ESP/ASR) warning light*

21 - Front fog lamps indicator light*.

22 - Main beam headlamps indicator light.INSTRUMENT PANEL DIALS: AUTOMATIC GEARBOX1 - Rev counter. 7 - Battery charge warning light. 23 - Low coolant level warning

light*.8 - Central (STOP) warning light.2 - Seat belt not fastened warning light.

24 - Dipped beam headlampsindicator light.9 - Engine oil pressure warning light.3 - Engine autodiagnostics warning light.

25 - Lighting rheostat.10 - Low fuel level warning light.4 - Handbrake and low brake fluid26 - Sport programme.level warning light. 11 - Right-hand direction indicator.

27 - Snow programme.5 - Left-hand direction indicator. 12 - Fuel gauge.

28 - Gear lever position indicator.6 - Coolant temperature indicator. 13 - ABS warning light.



INSTRUMENTS AND CONTROLS To prevent the risk of scalding, uns-crew the cap by two turns to allowthe pressure to drop.A permanently lit warning light or one that flashes with the engine running,

indicates an operating fault in the relevant unit. Some warning lights may Once the pressure has dropped,be linked to buzzers and a message on the multifunction display. Do not remove the cap and topup the level.ignore this warning: contact a PEUGEOT dealer as soon as possible. Contact a PEUGEOT dealer.If the Central STOP warning light comes on when you are driving, stopimmediately where it is safe to do so.

Central STOP warning light Handbrake and lowbrake fluid levelThis is linked to the "engine oil pressure", ''oil temperature''*, ''coolant

level low'', ''brake fluid level'', electronic brake force distribution fault'', warning lightand ''coolant temperature gauge'' warning lights, as well as warnings

Linked to the central STOPof openings, indicated by a diagram on the multifunction display.warning light.This light comes on each time the ignition is switched on.This comes on each time the ignitionStop immediately if it flashes with the engine running. is switched on.

Contact a PEUGEOT dealer. Illumination of this light is accompa-nied by an audible signal and a mes-

Engine oil pressure warning light sage on the multifunction displayindicating the cause of the warning:Linked with the central STOP warning light.- ''Handbrake on'',if the handbrakeIf it comes on with the engine running, it is accompanied by an audible

is applied or has not been releasedsignal and the message "Oil pressure low" or "Top up engine oil" oncorrectly,the multifunction display.

Stop immediately. - ''Low brake fluid level'' if there isan excessive drop in the brakeIf there is a lack of oil in the lubrication circuit, top up the level.fluid (if the light remains on evenContact a PEUGEOT dealer without delay. with the handbrake released),

Low coolant level warning light* - ''Brake system problem'' is dis-played simultaneously with theLinked to the central STOP warning light.ABS light, indicating a malfunctionThis comes on for approximately 3 seconds each time the ignition is switched on.of the electronic brake force distri-This warning light is accompanied by an audible signal and the messa- bution.ge "Top up coolan"t on the multifunction display.

Stop immediately.Stop immediately.Warning: Allow the engine to cool before topping up. Contact a PEUGEOT dealer.The cooling system is pressurised.

*Depending on engine


Battery charge Electronic stability programme (ESP/ASR)* warning lightwarning light This comes on for 3 seconds each time the ignition is switched on.This comes on each time The light, which remains on or comes on when the engine is running andthe ignition is switched on. the vehicle is moving, is accompanied by an audible signal and a message

"ESP/ASR system not operational" on the multifunction display; contact aIf it comes on with the engine run-PEUGEOT dealerning, it is accompanied by an audible

signal and a message "Low battery It flashes when the system is switched on and is lit continuously while the sys-charge" on the multifunction display. tem is switching off.It can indicate:- faulty operation of the charging cir- Engine autodiagnostics warning light

cuit, This comes on each time the ignition is switched on.- loose battery or starter terminals, The warning light showing clogging of the particle emission filter is lin-

ked to the engine autodiagnostics warning light.- a cut or slack alternator belt,- If it comes on with the engine running, accompanied by an audible signal and- an alternator fault. the message "Emission control system problem" on the multifunction dis-

Contact a PEUGEOT dealer. play, it indicates a malfunction in the emission control system.- "Diesel additive low level" or "Risk of clogging of particle emission filter"

indicates a malfunction in the particle emission filter.If it flashes when the engine is running, accompanied by an audible signal andthe message "Catalytic converter faulty" on the multifunction display, it indi-ABS warning light cates a malfunction in the injection or ignition system. There is a risk of damageto the catalytic converter (petrol engines only).This light comes on forContact a PEUGEOT dealer as soon as possible.3 seconds each time the

ignition is switched on. Diesel pre-heat lightIf it remains on or comes on above 8

This comes on each time the ignition is switched on.mph (12 kmh), this indicates a mal-Wait until it goes out before trying the starter.function of the ABS.

However, the vehicle retains conven-Water in diesel filter warning light*(according to country)tional servo-assisted braking.

Illumination of this light is accompa- Switching on of this warning light is accompanied by an audible signalnied by an audible signal and a mes- and the message ''Water in diesel filter'' on the multifunction display.sage "ABS system problem" on

There is a risk of damage to the injection system.the multifunction display.Contact a PEUGEOT dealer a soon as possible.Contact a PEUGEOT dealer.

* According to specification.


Passenger airbag disarming indicator light*Illumination of this warning light is accompanied by an audible signaland the message "Passenger air bag disarmed" on the multifunctiondisplay.

If the passager airbag is disarmed, the indicator light comes on when the ignitionis switched on and remains on.In all cases, if the warning light flashes; contact a PEUGEOT dealer.

Air bag warning lightThis light comes on for a few seconds when the ignition is switched on.Illumination of this warning light, with the engine running, is accompa- Coolant temperature indicatornied by an audible signal and a message "Air bag fault" on the multi-

When the needle is in zone A, thefunction display indicating:temperature is correct.- a fault in the front air bags,When the needle is in zone B, theor temperature is too high. The central

- a fault in the side air bags or curtain air bags. STOP warning light flashes, accom-panied by an audible signal and theContact a PEUGEOT dealer.message "Coolant temp. high" onthe multifunction display.

Seat belt not fastened warning light You must stop immediately.With the engine running, this indicator light comes on when the driver's Warning: wait for the engine to coolseat belt is not fastened. before topping up the level. The

cooling system is pressurised.In the event of a breakdown and inorder to avoid any risk of scalding,Low fuel level warning light unscrew the cap two turns to allowthe pressure to drop.

The warning light comes on for three seconds when the ignition When the pressure has dropped,is switched on.remove the cap and top up the level.When this light comes on with the engine running, it is accompanied by anContact a PEUGEOT dealer.audible signal and the message "Fuel level low" on the multifunction display.

When the warning light comes on, you have enough fuel to drive at least30 miles (50 km). The tank capacity is approximately 13 gallons (60 litres).This light flashes to indicate a malfunction of the fuel gauge.Contact a PEUGEOT dealer.


Selector lever positions on the automatic Automatic gearbox indicator lightsgearbox display

"SPORT" indicator lightParkThis comes on when the "SPORT" programme onthe automatic gearbox is selected.

Reverse

"SNOW" indicator lightNeutral This comes on when the "SNOW" programme on

the automatic gearbox is selected.

Drive

Manual mode :

1st gear engaged

2nd gear engaged

3rd gear engaged

4th gear engaged


Instrument panel display Lighting rheostatAfter switching on the ignition, three functions are shown in succession : With the lights on,

press the button to- service indicator (see corresponding section),vary the intensity of

- engine oil level indicator, the lighting on theinstrumentpanel andtotal distance recorder/total and trip distances.the multifunction dis-Note: the total and trip distances are displayed for 30 seconds when the ignitionplay. When the ligh-is switched off, on opening the driver's door, as well as on locking and unlocking ting reaches the minimum (or maxi-the vehicle. mum) setting, release it then press

again to increase (or reduce) thebrightness.Engine oil levelAs soon as the lighting is of the

When the ignition is switched on, the engine oil level is indicated for approxi- required brightness, release the but-mately 10 seconds, after the servicing information. ton.

MaximumCheck the level using the dipstick to confirm whether the messa- Trip recorder zeroge is correct; a surplus of oil can cause damage to the engine. resetContact a PEUGEOT dealer without delay.

With the ignition swit-ched on, press the

Minimum button.

Check the level using the dipstick to confirm whether the messa-ge is correct; a surplus of oil can cause damage to the engine.Contact a PEUGEOT dealer without delay.

Oil level gauge faultThe symbol (square) flashes; it indicates a fault in the oil levelgauge.There is a risk the engine will be damaged.Contact a PEUGEOT dealer.

YOUR 307 IN DETAIL

THE MULTIFUNCTION DISPLAY Setting the parametersKeep button 1 pressed for two seconds to access the settings.Then, individual presses on button 1 allow you to scroll through the various para-meters:- language in which the information is displayed,- unit of distance (kms or miles),- unit of temperature (degrees Celsius or Fahrenheit),- time format (12 then 24 hour mode),- hour,

Monochrome screen B- minutes,

This enables the following informa-- year,tion to be displayed:- month,- the time,

- the date, - day.- the outside temperature (the °C Pressing button 2 allows you to change the parameter selected. Maintain the

symbol flashes when there is a risk pressure for rapid scrolling.of ice), After ten seconds without operation, the screen returns to the current display,

the modified data are recorded.- the radio displays,- the status of the doors (door, tail-

gate* or bonnet* open),- the temporarily displayed warning

messages (e.g.''battery low'') orinformation messages (e.g. "pas-senger air bag disarmed'') can becleared by pressing button 1 or 2,

- the trip computer*.


YOUR 307 IN DETAIL

AUDIO RB3

Stalk movement Function1 - Upwards Increase volume

2 - Downwards Decrease volume

1 + 2 Simultaneous press Sound cut-off (mute); restoring of the sound by pressing any button

3 - Press Automatic search of higher frequencies (radio)Selection of the next track (CD)

4 - Press Automatic search of lower frequencies (radio)Selection of the previous track (CD)

5 - Press the end Change of source (radio/cassette/CD changer)

6 - Rotation Selection of next station stored in memory (radio) -(clockwise) Selection of next CD.

7 - Rotation Selection of previous station stored in memory (radio) -(anti-clockwise) Selection of previous CD.

YOUR 307 IN DETAIL

Button Function

A RDS RDS function on / off.Press for more than 2 seconds : regional following mode on/off.

B TA Traffic information priority on/off.C Press fully: cassette rewind.D Press fully: fast forward.

j kC+D Press half way: reversal of direction of play of the cassette.jj kk Press fully: ejection of the cassette.

vE Increase audio setting.wF Decrease audio setting.

G Adjustment of bass, treble, loudness, sound distribution and automatic volume correction.H SRC Selection of source: radio, cassette or CD changer.

Press for more than 2 seconds: CD shuffle.kkI Automatic search of higher frequency.

Selection of next CD track and PTY (radio).jjJ Automatic search of lower frequency.

Selection of previous CD track and PTY (radio).K MAN Manual/automatic operation of buttons I and J in radio mode.L BND Selection of FM1, FM2, FMast and AM wavebands.

AST Press for more than 2 seconds: automatic storing of stations in memory (autostore).M Radio on/off.

Decrease volume.N+ Increase volume.O

1 to 6 12 34 56 Selection of station stored in memory.Press for more than 2 seconds: storing of a station in memory.

1 to 5 Selection of a CD changer disc.

YOUR 307 IN DETAIL

AUDIO RD3

Stalk movement Function1 - Press (behind) Increase volume

2 - Press (behind) Decrease volume

1 + 2 - Simultaneous press Sound cut-off (mute); restoring of the sound by pressing any button

3 - Press Automatic search of higher frequencies (radio)Selection of the next track (CD)

4 - Press Automatic search of lower frequencies (radio)Selection of the previous track (CD)

5 - Press the end Change of source (radio/cassette/CD changer)

6 - Rotation Selection of next station stored in memory (radio) -(clockwise) Selection of following CD

7 - Rotation Selection of previous station stored in memory (radio) -(anti-clockwise) Selection of previous CD

YOUR 307 IN DETAIL

Button Function

A RDS RDS function on / off.

Press for more than 2 seconds : regional following mode on/off.

B TA Traffic information priority on/off.Press for more than 2 seconds: PTY function on/off.

vE Increase audio setting.

wF Decrease audio setting.

G Adjustment of bass, treble, loudness, sound distribution and automatic volume correction.

kkI Automatic search of higher frequency.Selection of next CD track and PTY (radio).

jjJ Automatic search of lower frequency.Selection of previous CD track and PTY (radio).

K MAN Manual/automatic operation of buttons I and J.

M Radio on/off.

Decrease volume.N

+ Increase volume.O

P Radio Selection of FM1, FM2, FMast and AM wavebands.Press for more than 2 seconds : automatic storing of stations in memory (autostore).

Q CD Selection of CD.Press for more than 2 seconds: shuffle.

R CH.CD Selection of CD changer.Press for more than 2 seconds: shuffle

i Ejection of CD.S

1 to 6 Selection of station stored in memory.Press for more than 2 seconds: storing of a station in memory.

1 to 5 Selection of a CD changer disc.

YOUR 307 IN DETAIL

GENERAL FUNCTIONS

On/offWith the ignition key in the accessories or ignition position, press button M to switch the set on or off.The set can operate for 30 minutes without the vehicle ignition being switched on.

Anti-theft systemThe audio system is coded in such a way that it can operate only on your vehicle. It would not function if fitted to anothervehicle.The anti-theft system is automatic and requires no action on your part.

ADJUSTING THE VOLUMEPress button O to increase the volume, or button N to decrease it.Continuous pressure on buttons O and N allows a gradual adjustment of the volume.

AUDIO SETTINGSPress button G several times in succession to access the bass (BASS), treble (TREB), loudness (LOUD),fader (FAD), balance (BAL) and automatic volume correction.Exit from audio mode is automatic after a few seconds without pressing any button, or by pressing button Gafter configuration of the automatic volume correction.Note : bass and treble settings are specific to each source. It is possible to set them differently for radio,cassette (RB3), CD (RD3) and CD changer.

YOUR 307 IN DETAIL

Adjusting the bassWhen "BASS" is displayed, press button E or F to vary the setting.- "BASS -9" for a minimum bass setting,- "BASS 0" for a normal setting,- "BASS +9" for a maximum bass setting.

Adjusting the trebleWhen "TREB" is displayed, press button E or F to vary the setting.- "TREB -9" for a minimum treble setting,- "TREB 0" for a normal setting,- "TREB +9" for a maximum treble setting.

Adjusting the loudnessThis function automatically emphasises bass and treble tones.Press button E or F to switch the function on or off.

Adjusting the front/rear sound distribution (Fader)When "FAD" is displayed, press button E or F.Button E increases the volume at the front.Button F increases the volume at the rear.

Adjusting the right/left sound distribution (Balance)When "BAL" is displayed, press button E or F.Button E increases the volume on the right-hand side.Button F increases the volume on the left-hand side.

Automatic volume correction "CAV"This function enables the volume to be automatically adjusted depending on the level of noise produced by the speed of thevehicle.Press buttons E or F to switch the function on or off.

YOUR 307 IN DETAIL

RADIONotes on radio receptionYour car radio is subject to phenomena which do not affect domestic radio sets. Both AM (MW/LW) and FM reception aresubject to various forms of interference. This is no reflection on the quality of the equipment, but is due to the nature of thesignals and the way in which they are transmitted.On MW/LW, interference may be noticed when passing under high voltage power lines or bridges, or in tunnels.On FM, interference may be the result of increasing distance from the transmitter, deflection of the signals by obstacles(mountains, hills, buildings etc), or of being in an area which is not covered by a transmitter.

Selecting radio mode

Audio RB3 : press button " SRC" several times in succession.

Audio RD3 : press button P.

Selecting a waveband

Autoradio RB3 : briefly press button "BND/AST" to select the FM1, FM2, FMast and AM wavebands.

Autoradio RD3 : briefly press button P to select the FM1, FM2, FMast and AM wavebands.

Automatic station searchBriefly press button I or J to search for the station immediately above or below. By continuing topress the button in the direction selected, you will obtain continuous scrolling of the frequency.The scrolling stops at the first station found as soon as the button is released.If the TA traffic programme is selected, only stations broadcasting this type of programme are

selected.Searching for a station occurs first in "LO" sensitivity (selection of the most powerful transmitters) during scanning of thewaveband, then in "DX" sensitivity (selection of the weakest and most distant transmitters).To make a direct search in "DX" sensitivity, press button I or J twice.

YOUR 307 IN DETAIL

Manual station searchPress the "MAN" button.Briefly press button I or J to increase or decrease the frequency displayed.By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.The scrolling stops at the first station found as soon as the button is released.Pressing the "MAN" button again returns you to automatic station search.

Manual storing of stations in the memorySelect the station required.Press one of the buttons "1" to "6" for more than two seconds.The sound stops then becomes audible again, confirming that the station has been stored in the memory.

Automatic storing of FM stations in the memory (autostore)

Audio RB3 : press and hold button "BND/AST" for more than two seconds.

Audio RD3 : press and hold button "P" for more than two seconds.

Your radio automatically stores the 6 stations with the strongest signal in FM. These stations are stored in the FMast wave-band.If it is not possible to find 6 stations, the remaining memories are empty.

Recalling stations stored in the memoryFor each waveband, briefly press buttons "1" to "6" to recall the corresponding station.

YOUR 307 IN DETAIL

RDS

Using the RDS (Radio Data System) function on FMRadio Data System allows you to continue listening to the same station whatever frequency it is using for the region you aregoing through.

Briefly press the "RDS" button to switch the function on or off.The multifunction display wil show:- "RDS" if the function is selected.- "(RDS)" if the function is selected but not available.

RDS station followingThe display indicates the name of the station selected. The radio is continually searching for the station which has the bestreception and which is transmitting the same programme.

Traffic information programmePress the "TA" button to switch the function on or off.The multifunction display will show:- "TA" if the function is selected,- "(TA)" if the function is selected but not available.

Any traffic information flash will be given priority, whatever source you are listening to (radio, cassette or CD changer).If you wish to interrupt a message, press the "TA" button; this switches the function off.Note : the volume of traffic information announcements is independent of the volume of normal radio listening. You canadjust it using the volume button. The setting will be stored and will be used when the next messages are broadcast.

Regional following modeWhen they are part of a network, certain stations broadcast regional programmes in the various areas they serve. With regio-nal following mode you can keep listening to the same programme.Press the "RDS" button for more than two seconds to switch the function on or off.

YOUR 307 IN DETAIL

PTY function: Audio RD3This allows you to listen to stations broadcasting a specific type of programme (news, culture, sport, rock etc.).

With FM selected, press the "TA" button for two seconds to switch this function on or off.To search for a PTY programme:- select the PTY function,

- briefly press button I or J to scroll down the list of the various types of programmes offered.- when the programme of your choice is displayed, keep button I or J pressed for two seconds

to carry out an automatic search (after an automatic search the PTY function is switched off).

In PTY mode the different types of programmes can be stored in memory. To do this, press thepreselection buttons "1" to "6" for two seconds.

Briefly press the corresponding button to recall the type of programme stored in the memory.

EON system: Audio RD3This connects stations which are part of the same network. It enables the broadcast of traffic information by a station that ispart of the same network as the station to which you are listening.This service is available when you have selected the TA traffic information programme or the PTY function.

YOUR 307 IN DETAIL

CASSETTE: AUDIO RB3

Selecting cassette modeWhen a cassette is inserted, the cassette player will start automatically.If a cassette is already inserted, press button "SRC" several times to select cassette mode.

Note: before inserting the cassette, ensure that the tape is taut

Ejecting the cassetteFully press buttons C and D to eject the cassette from the player.

Direction of playThe player will play sides 1 and 2 of the cassette alternately, by automatically reversing the direction of play at the end of aside. To manually reverse the direction of play, press the 2 buttons C and D half way.

Fast forward/rewindFully press button C or D to fast forward or rewind the cassette. At the end of the fast forward/rewind, the set plays the cur-rent side.

Recommendations for using casssettes- Use good quality cassettes.- Avoid use of cassettes which play for longer than 90 minutes.- Never expose the cassettes to heat or the direct rays of the sun.- Re-tighten the tape if necessary before introducing the cassette in the player.- Clean the playing head regularly with a damp type cleaning cassette.

YOUR 307 IN DETAIL

COMPACT DISC : AUDIO RD3

Selecting CD modeAfter insertion of a disc, printed face upwards, the player starts automatically.If a disc is already inserted, press button Q.

Ejection of a discPress button S to eject the disc from the player.

Selecting a trackPress button I to select the next track.Press button J to return to the start of the current track or to select the previous track.

Accelerated playKeep button I or J pressed for forwards or backwards accelerated play.Accelerated play stops as soon as the button is released.

ShuffleWhen the CD player is selected, keep button Q pressed for two seconds.The tracks will be played in random sequence. Pressing the button again for two seconds returns you to normal play.Suffle mode is de-activated each time the audio is switched off.

YOUR 307 IN DETAIL

CD CHANGER*

Selecting CD changer mode

Audio RB3 : press button " SRC" several times in succession.

Audio RD3 : press button R.

Selecting a discPress buttons "1" to "5" of the changer or the radio to select the corresponding disc.

Selecting a trackPress button I to select the next track.Press button J to return to the start of the current track or to select the previous track.

Accelerated playKeep button I or J pressed for forwards or backwards accelerated playAccelerated play stops as soon as the button is released.

ShuffleWhen the CD changer is selected:- audio RB3 : keep button "SRC" pressed for two seconds;- audio RD3 : keep button R pressed for two seconds.The tracks will be played in random sequence. Pressing the button again for two seconds returns you to normal play.


YOUR 307 IN DETAIL

CD CHANGER*

This is located in the centre of the fascia under the radio. It holds up to 5discs.To load the changer, insert the discs printed side upwards.To remove a disc, keep button "1" to "5" pressed down.


YOUR 307 IN DETAIL

YOUR 307 IN DETAIL

VENTILATION

1. Windscreen de-icing or demisting vents.

2. Front window de-icing or demisting vents.

3. Side vents.

4. Centre vents.

5. Air outlet to front footwells.

6. Air outlet to rear footwells*.

Advice on operationPlace the air flow control at a level sufficient to ensure correct renewal of air in the passenger compartment.The ''OFF'' position cuts off all the air circulation in the passenger compartment.

Note : only use the ''OFF'' position occasionally (risk of condensation).

For perfectly even air distribution, take care not to obstruct the exterior air intake grilles, the vents and the air ducts underthe front seats, as well as the air extractor located in the boot. Check that the pollen filter is in good condition.

YOUR 307 IN DETAIL

HEATING / VENTILATION

1. Temperature adjustment 2. Air distribution adjustment Place air intake control button 4 inthe ''Outside Air'' position, (button4 released, indicator light off),

To be adjusted to your requirements. Windscreen and side win- Place the temperature and air flowdows (demisting/de-icing). controls to maximum,Close the centre vents.

To quickly demist or de-ice the wind-screen and side windows:

YOUR 307 IN DETAIL

4. Air intake 5. Rear screen demistingWindscreen, side windowsand footwells. Pressing button 4 permits With the engine running,

recirculation of the interior pressing the button onceair. Recirculation, indicated demists the rear screenby illumination of the indica- and the mirrors*.Footwells.tor light , prevents exterior This switches off automatically after

odours and smoke from entering the approximately twelve minutes.passenger compartment and speeds Pressing again activates demistingup the rate at which the passenger for a further twelve minutes.compartment can be heated.Centre and side vents. It is possible to stop demisting by

pressing the button again before theAs soon as possible, place control end of the twelve minutes.button 4 in the outside air position toprevent misting of the windows anddeterioration of the air quality. Theindicator light switches off.

3. Air flow adjustment

Turn the control from posi-tion 1 to position 4 to obtainan air flow sufficient toensure your comfort.


YOUR 307 IN DETAIL

AIR CONDITIONING*

1. Air conditioning The air conditioning does not ope- 2. Temperature adjustmentrate while the air flow adjustmentThe air conditioning is designed to To be adjusted to your requirements.control is in the "OFF" position.operate in all seasons. In summer, itNoteenables the temperature to be lowe-

red and in winter, above 0 °C, it It is quite normal that the condensa-increases the effectiveness of the tion created by the air conditioningdemisting. results in a flow of water under the

vehicle when it is stationary.Press the switch, the indi-cator light comes on.

YOUR 307 IN DETAIL

3. Air distribution adjustment 4. Air flow adjustment Important precautionOperate the air conditioning systemfor 5 to 10 minutes, once or twice aWindscreen and side win- Turn the control from posi-month, to keep it in perfect workingdows (demisting-de-icing). tion 1 to position 4 to obtainorder.an air flow sufficient to

ensure your comfort. If the system does not produce coldair, do not activate it and contact a

To quickly demist or de-ice the wind- PEUGEOT dealer.screen and side windows:Place the temperature and air flow 5. Air intake

controls to maximum, 6. Rear screen demistingClose the centre and side vents, Pressing button 5 permitsPlace air intake control 5 to the recirculation of the interior With the engine running,"Outside Air" position (button 5 air. Recirculation, indicated pressing the button oncereleased, indicator light off), by illumination of the indica- demists the rear screen

tor light, prevents exterior odoursStart the air conditioning by pres- and the mirrors*.and smoke from entering the pas-sing the AC button. This switches off automati-senger compartment. cally after approximately twelveUsed simultaneously with the air minutes.conditioning, recirculation enables

Pressing again activates demistingheating and cooling performance to for a further twelve minutes.be improved.It is possible to stop demisting byUsed in a humid climate, recircula- pressing the button again before thetion may result in misting of the win- end of the twelve minutes.Windscreen, side windows dows.and footwells.

As soon as possible, place button 5Note: it is quite normal that thein the outside air position, to preventcondensation created by the airdeterioration of the air quality. The

Footwells. conditioning results in a flow ofindicator light switches off.water under the vehicle when it isstationary.

Centre and side vents.


YOUR 307 IN DETAIL

AUTOMATIC AIR CONDITIONING*

Automatic operation 2. Automatic comfort 3. Automatic visibilityprogramme programme

1. Temperature adjustmentPress the "AUTO" button. In some cases, the automa-The system automatically tic comfort programme mayThe chosen temperature adjusts the atmosphere not be sufficient for demis-

is displayed. Press the up inside the vehicle in accor- ting or deicing of the win-and down arrows to chan- dance with the chosen temperature. dows (humidity, several passengers,ge it. A setting around 21 To do this, it controls the temperatu- ice...). In this case, select the auto-°C enables a comfortable re, the flow, the distribution and the matic visibility programme to cleartemperature to be obtained. intake of air as well as the air condi- the windows quickly.

tioning.

YOUR 307 IN DETAIL

5. Air distribution 8. Switching the system offManual operationIf you wish you can make a differentchoice from that offered by the sys- Pressing this button several The "OFF" button enablestem by changing a setting. The other times in succession the entire system to be swit-functions will still be controlled auto- enables the air flow to be ched off.matically. Pressing the "AUTO" but- directed in turn towards:ton returns the system to completely the windscreen,(demisting or de-automatic operation. icing),

the windscreen and the footwells, 9. Demisting the rear screenthe footwells,the centre and side vents and the Pressing this button

4. Air conditioning footwells, demists the rear screenand the mirrors*. Demistingthe centre and side vents.switches off automatically.Pressing this button It is possible to stop opera-switches off the air conditio- tion of the demisting before it is swit-6. Air flowning. The symbol "ECO" is ched off automatically by pressingdisplayed. Automatic ope- the button again.ration of the air conditioning is resu-

The flow of air can bemed when the button is pressedincreased or reducedagain. The symbol "A/C" is dis- Note: the condensation created byby pressing buttons +played. the air conditioning causes a flow ofor respectively. water under the vehicle when statio-

nary which is perfectly normal.Note7. Air intakeIt is quite normal that the condensa-

tion created by the air conditioningresults in a flow of water under the

Pressing this buttonvehicle when it is stationary.enables the interior air tobe recirculated.Recirculation, shown on

the display, enables the passengercompartment to be insulated fromexterior odours and smoke.Avoid prolonged recirculation ofinterior air. To do this, press the but-ton again to resume intake of outside

* According to specification.air.

YOUR 307 IN DETAIL

FRONT SEATS

1. Forwards-backwards adjustment

Lift the control and slide the seatforwards or backwards.

2. Access to rear seats (3 door)

Pull the handle to fold the seatback and move the seat for-wards.

On repositioning, the seat returnsto its initial position.

Warning: no person or objectmust prevent the seat from retur-ning to its initial position; a returnto this position is necessary forthe seat to lock in place.

3. Seat back angle adjustment

Push the handle towards therear.

4. Driver's* or passenger's* seatheight adjustment*

Pull the handle upwardsor push itdownwards as many times asnecessary to obtain the requiredposition.


YOUR 307 IN DETAIL

REAR HEAD RESTRAINTS5. Front heated seats control* To put it back in position, locatethe stems of the restraint in thePress the switch. The temperatu- holes, taking care to keep them These have a high position for whenre is controlled automatically. in line with the seat back. they are in use and a low position forPressing the switch again stops when they are stored.operation.

To lower the head restraints, pressActive seat back (front seat)Note: the command for activation the lug.of the heating of the seat(s) This possesses a device to preventThe head restraints are removable.remains memorised for two "whiplash".

minutes after the ignition has To remove them, pull upwards as farWhen there is an impact from thebeen switched off. as the stop then press the lug.rear, the action of the body on theseat back forces the head restraint6. Front armrests*forwards and upwards, preventing

These can be folded down and the head being thrown backwards.are removable.To remove them, press the but-ton located between the armrest 8. Storage drawers*and the side of the seat and pull

There is a storage drawer underit.each front seat.To open it, lift and pull.

7. Front head restraint height To take it out, open to its full extent,and angle* adjustment press the ends of the slides and liftit, then remove it completely.To raise or lower the restraint,

Do not place heavy objects in thepull it forwards, sliding it at thedrawers.same time.

The angle of the head restraintUnder the front passenger seat, thelayout of the floor allows for storageThe adjustment is correctof a first aid kit and a warning trianglewhen the upper edge of the(small version).head restraint is level with

the top of the head.Never drive with the

can also be adjusted*. head restraints remo-ved; they should be inTo remove the head restraint,place and correctlyplace it in the top position, lift theadjusted.lug using a coin and pull it for-

wards and upwards at the same* According to specification.time.

YOUR 307 IN DETAIL

Rear armrest*REAR SEATS- Lower the armrest to access theTo fold down the rear left seat (2/3 storage shelf on the seat back.part) or the right seat (1/3 part),- Lift the lid. It contains a storagealways start with the seat, never

tray as well as two cup holders andwith the seat back (risk of damage):two pen holders.move the front seat(s) forward if

necessary,lift the front of the seat 1,tilt the seat 1 against the front

seat(s),check that the seat belt is correctly

positioned on the side of the seat When repositioning:back, fold up the seat back and lock it

pull control 2 forwards to unlock (the red marker of control 2 shouldthe seat back 3, no longer be visible),

place the head restraints in the low fold up the seat.position,

fold down the seat back 3. Take care not to trap the seatbelts.


YOUR 307 IN DETAIL

In the front, the child seat must befitted:- either in the "rear facing" position

for children weighing between3 and 11 kg front seat as far for-ward as possible so that the bodyof the child seat is in contact withor as close as possible to the ins-trument panel. This position thuslimits movement of the child seat inthe event of an accident.

- or exceptionally the child seat maybe fitted in the 'forwards facing'position if the rear seats are alrea-dy occupied by other children or ifthe rear seats cannot be used (notpresent, folded). In this case, use''Isofix''mountings The special child seat, approved bythe Isofix mountings, the restrai- PEUGEOT, is the Isofix KIDDY seat.Available on the two side rear seats, ning cushion and the seat belt and It can be used "rear facing" from 3 toand as an accessory on the front adjust the front passenger seat to 11 kg and "forwards facing" from 9 topassenger seat*, the Isofix moun- the "mid-travel" position. 18 kg.tings allow for fitting of a special

This seat can also be used on seatschild seat, approved by UTAC for In both cases it is imperative to not fitted with Isofix mountings:PEUGEOT vehicles and sold bydisarm the passenger air bag. buckling of the three-point seat beltPEUGEOT dealers.

is then compulsory.The locks incorporated in the childIn the rear, the child seat may be fit-seat fit onto the Isofix mountings andted in the "rear facing" or "forwardsensure safe, reliable and fast assem- Follow the instructions for fittingfacing" position. In this case thebly. the child seat given in the instruc-front seat is in the intermediate tion booklet.longitudinal position, seat backupright.The combined use of the Isofixmountings, the restraining cushionand the seat belt is compulsory for aseat fitted "facing forward".

* During 2001.

YOUR 307 IN DETAIL

CHILD SEATSAlthough one of PEUGEOT's main criteria when designing your vehicle, the safety of your children also depends on you.For optimum safety, please follow the following precautions:- All children under the age of 10 are required to travel in approved restraining equipment*, suited to their weight, in a seat

fitted with a seat belt- front passenger seat*: children under the age of 10 must not travel in the "forwards facing" position, unless the rear seats

are already occupied by other children or the rear seats cannot be used (not present, folded). In this case, adjust the frontpassenger seat to the "mid-travel" position. The "rear facing" position is authorised.

After carrying out numerous tests, PEUGEOT recommends the following systems:

Up to 18 months (up to 29 lbs. or 13 kg)1 "Römer Babysure ", is installed with its back to the engine and secured with a three-point seat belt, on either the front or

rear seat.In the front, the passenger seat must be adjusted to the "mid-travel" position.

From 9 months to 3 or 4 years (20 to 40 lbs. or 9 to 18 kg)

2 "Römer Prince" is fitted in the rear with a three-point seat belt.For the safety of your children, the seat and the restraining cushion must never be separated.

From 3 to 10 years (33 to 80 lbs or 15 to 36 kg)3 "Römer Vario": is fitted in the rear with a two or three point seat belt.

YOUR 307 IN DETAIL

From 3 to 10 years (33 to 80 lbs or 15 to 36 kg) Never leave a child or ananimal in a vehicle which"Recaro Start": is fitted in the rear with the three-point seat belt.4is exposed to the sunwithThe height, depth and length of the seat must be adjusted in line with the agethe windows closed.and size of your child.

Never leave the keys within reachof children inside the car.

"Klippan Optima" : is fitted in the rear with a three-point seat belt.5 Strap children into their seatseven on short journeys.Above 6 years (approximately 45 lbs or 22 kg).

Remember, even for short journeys, to fasten the three-point seat belts or thechild seat straps, keeping the slack in relation to the child's body to a minimum.To prevent the doors from opening accidentally, use the ''child-proof'' lock. Also,do not open the rear windows more than a third.

Observe the precautions regar-ding the passenger air bag.Observe the fitting and fasteningrecommendations, indicated inthe child seat instructions, strictly.

* According to current legislation.

YOUR 307 IN DETAIL

Pre-tensioning and force- To be effective, a seat beltlimiting front seat belts* must be tightened asclose to the body as pos-Safety in the event of a frontal impactsible.has been improved by the introduc-

tion of pre-tensioning and force-limi- Depending on the nature and theting front seat belts. Depending on seriousness of the impact, thethe seriousness of the impact, the pre-tensioners may be triggeredpre-tensioning system instantly tigh- before and independently of thetens the seat belt firmly against the air bags.body of the occupant. In all cases of an air bag beingThe pre-tensioning seat belts are triggered, the air bag warning lightarmed when the ignition is on. on the instrument panel comes

on.The force-limiting device reduces theAfter an impact, have the systempressure of the seat belt against thechecked by a PEUGEOT dealer.body of the occupant in the event of

an accident. The system has been designed tobe fully operational for ten years.Have it replaced after this period.Rear seat belts

The three rear seats are all fitted withthree-point inertia reel seat belts.

SEAT BELTS The side seats are fitted with force-limiting devices.

To adjust the height of thefront seat belts To lower the attachment point,

squeeze control 1 and slide itdownwards.

To raise the attachment point,squeeze control 1 and slide itupwards.

To lock the seat belts Pull the strap, then insert the

buckle into the stalk.

YOUR 307 IN DETAIL

THE KEYS The remote control UnlockingLocking Press button B to unlock the vehicleThe keys allow you to switch on the

This is confirmed by rapid flashing ofignition and to independently opera- Press button A to lock the vehicle.the direction indicators.te the locks on the front doors, the This is confirmed by fixed lighting of

fuel filler cap, the glove box and the the direction indicators for approxi- Note: if the vehicle is locked andpassenger air bag disarming switch. mately two seconds. unlock ing is activated inadvertently

without the doors being openedNote : a long press on button A, inwithin 30 seconds, the vehicle willaddition to locking, automatically

Central locking lock automatically.closes the windows* and the sun-roof*. Do not repeatedly press the buttonsFrom the driver's door, the keys allow

of your remote control out of rangeyou to lock, deadlock* or unlock the Vehicles fitted with deadlocking* of your vehicle. You risk causing itdoors and tailgate, as well as fold backnot to work and the remote controlWarning: deadlock ing* renders thethe exterior mirrors*.would have to be reprogrammed.internal and external door lock ingIf one of the doors or the boot is open,

controls inoperative.the central locking does not work; aPressing button A deadlocks thebleep indicates this when locking by Locating your carvehicle. This is confirmed by fixedremote control.

To locate your car, if you have loc-lighting of the direction indicators forked it, in a car park:approximately two seconds.The remote control performs the press button A (the courtesyNote: a long press on button A per-same functions at a distance.

lights come on and the directionmits automatic closing of the win-indicators flash for a fewdows* and the sunroof*, in additionseconds).to deadlocking.

A second press on button A withinfive seconds of deadlocking changesthis to normal locking. This is confir-med by fixed lighting of the directionindicators for two seconds, followedby a brief sound from the horn.


YOUR 307 IN DETAIL

Electronic engine immobiliserThis locks the engine control systemas soon as the ignition has beenswitched off and therefore preventsstarting of the vehicle by anyone whodoes not have the key.

The ignition key has an electronicchip which has a special code.When the ignition is switched on, thecode is recognised and starting ispossible.If the system does not function Confidential card Changing the battery of thecorrectly, the central locking button remote controlindicator light, situated in the centreof the instrument panel, flashes The information "battery flat" is givenThe confidential card contains therapidly when the ignition is switched by an audible signal accompanied byidentification code necessary for anyon (2nd notch on the ignition key, the message "Remote control batte-work carried out by a PEUGEOTaccompanied by an audible signal ry low" on the multifunction display.dealer on the system. This code isand the message "Anti-theft device hidden by a film which should be To replace the battery, remove the boltfaulty" on the multifunction display. removed only if necessary. then unclip the casing using a coin at

the ring (CR2016/3 volt battery).Keep your card in a safe place,WARNING: your vehicle is no longer never inside the vehicle. If the remote control does not workprotected in this event. Contact a after the battery has been changed,PEUGEOT dealer as soon as pos- reprogramme the remote control.

Key in ignitionsible.A buzzer sounds on opening the dri- Programming the remotever's door, if the key has been left in controlthe ignition.

Switch off the ignition.Switch the ignition on again.Immediately press button A.Switch off the ignition and remo-ve the remote control key fromthe ignition lock. The remotecontrol is now working again.

YOUR 307 IN DETAIL

Make a careful note of the number on each key. The key number is coded on the label attached to the key. If thekey is lost, your PEUGEOT dealer can rapidly supply you with new keys.

The high-frequency remote control is a high-performance system.

Do not operate it while it is in your pocket as there is a possibility that it may unlock your vehicle without yourknowledge.The remote control cannot operate if the key is in the ignition, even if the ignition is switched off, except for reprogram-ming.

Do not operate the deadlock if there is someone inside the vehicle.As a safety measure (when there are children on board), remove the ignition key when leaving the vehicle, even for ashort time.Do not handle the buttons of your remote control when out of range of your vehicle. You run the risk of stopping it fromwork ing.

It would then be necessary to reprogramme the remote control.

When buying a second-hand car:

- Ensure that you are given the confidential card;

- have the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only onesthat can start your vehicle.

Do not make any modifications to the electronic engine immobiliser system.

YOUR 307 IN DETAIL

Set the alarm by locking or dead-When the alarm is triggered, thesiren sounds and the direction indi- locking using the remote controlcators flash for thirty seconds. (button A indicator light flashes

once a second).After triggering, the alarm remainsset. Note: when the alarm is set but the

remote control does not operate:Warning: if the alarm has been trig-gered ten times in succession, on the Unlock the doors with the keyeleventh time it becomes inactive. and open the door. The alarm isNote: if button A flashes rapidly, the triggered.alarm has been triggered while you Switch on the ignition in the nextwere away from your car. ten seconds. The alarm is disarmed.

THE ALARM*This provides two types of protec- Disarming Incorrect operationtion:

Unlock the vehicle with the remote When the ignition is switched on, if exterior protection: when this is control key (button A indicator light button A lights for ten seconds, thereset, the alarm sounds if a door, goes out). is a fault in the siren connection.the boot or the bonnet is opened.Note: if the alarm has been triggered Contact a PEUGEOT dealer to have interior protection: when this is while you were away from your car, the system checked.set, the alarm sounds if the sen- the rapid flashing of the indicator

sors detect a variation in the air light will stop when you switch on themovement inside the vehicle ignition. Automatic activation**(break ing of a window or move-ment inside the vehicle). The alarm is activated automatically

two minutes after the last openingTo set the alarm with exterior(door or boot) is closed.protection onlySetting the alarm In order to avoid accidental triggeringIf, while you are away from the Switch off the ignition and get out of the alarm when a door or the bootvehicle, you wish to leave a window is opened, it is essential to first pressof the vehicle. partially open or a pet inside the the remote control opening button. Set the alarm within five minutes vehicle, you should choose exterior

of getting out of the vehicle, by protection only.locking or deadlocking using the

Switch off the ignition.remote control (button A indica-tor light flashes once per In the next ten seconds, presssecond). button A until the indicator light

is on continuously.Note: if you wish to lock your vehiclewithout setting the alarm, use the * According to specification Get out of the vehicle.door lock. ** According to country

YOUR 307 IN DETAIL

THE DOORS

Locking / Unlocking from theinsidePress button A.This allows locking or unlocking ofthe doors and the tailgate.Opening the doors fromNote: if the vehicle is deadlocked,outsidebutton A does not function. In this Child safetycase use the remote control for

This prevents either of the rear doorsunlock ing.being opened from inside. Turn the red plastic switch a

"Door open" alert quarter of a turn using the ignitionkey.With the engine running or the

vehicle moving, the flashing of thecentral "STOP" warning light,accompanied by an audible signaland a diagram locating the problemon the multifunction display, warnsyou that a door is not properly clo-sed.Opening the doors from

insideThe front door unlocking controlspermit complete unlocking of thevehicle.However, the rear door unlockingcontrols only unlock the door concerned.Note: the door opening switches donot function when the vehicle isdeadlocked.

YOUR 307 IN DETAIL

TAILGATE Tailgate release THE SUNROOF*This enables the tailgate to be unloc- - to partially open the roof: TurnSimultaneous locking or ked in the event of a central locking the switch to the right (three pos-unlocking of the tailgate and fault. sible settings).the doors - Fold back the rear seats to gain - to close: Turn the switch back toaccess to the lock from inside theThe tailgate is locked or unlocked by the position "O".boot,remote control or the driver's door lock.

- to open the roof completely:- Insert a small screwdriver into holeTo open, pull handle A and lift the Turn the switch to the left (six pos-A of the lock to unlock the tailgate.tailgate. sible settings).Note: the tailgate locks automatical- - to close it completely: Turn thely when the vehicle is being driven at switch back to position "O".6 mph (10 km/h) and unlocks when

- safety auto-reverse: When theone of the doors is opened or at asunroof is closing and meets anspeed below 6 mph (10 km/h).obstacle, it stops then opensagain."Tailgate open" warning - After a safety auto-reverse

When the engine is running or if the manoeuvre, to synchronise thevehicle is being driven, the flashing position of the switch with the roofof the central "STOP" warning light position, press and hold the switch.accompanied by an audible signal Note: the sunroof shutter is manual.and a diagram on the multifunctiondisplay warns you that the tailgate isnot properly closed. * According to specification.

YOUR 307 IN DETAIL

Open the fuel filler flap.by an audible signal and a diagramon the multifunction display, warns Insert the key then turn it to theyou that the bonnet is not properly left.closed.

Remove the cap and hang it onthe hook located on the inside ofthe flap.

A label affixed inside the fuel fillerflap indicates which type of fuel touse.When you fill your tank, do not conti-nue after the third cut-off of thepump. This could cause your vehicleto malfunction.

OPENING THE BONNET The capacity of the tank is approxi-mately 12 gallons (60 litres).From inside: push the handle on the After filling the tank, lock the capdriver's side under the fascia.

and close the fuel filler flap.From outside: lift the catch andraise the bonnet.

FILLING WITH FUELBonnet strutSecure the strut to hold the bonnet Low fuel levelopen.Before closing the bonnet, replacethe strut in its housing. When the minimum fuel

level in the tank is rea-ched, this warning lightTo close comes on.

Lower the bonnet and release it at You can still drivethe end of its travel. Check that the approximately 30 miles (50 km).bonnet is properly locked. Flashing of the warning light indi-

cates a malfunction of the fuel"Bonnet open" warning* gauge.

Contact a PEUGEOT dealer.With the engine running or thevehicle moving, flashing of the central The engine must be switched off"STOP" warning light accompanied when filling with fuel. * According to specification.

YOUR 307 IN DETAIL

Dipped/Main beam change Front and rear foglamps (2nd rotation of

Pull the stalk towards you. the ring forwards).Note: with the ignition off, if the dri- These operate with thever's door is opened, a buzzer side lights and the dipped/mainsounds if you have left your lights on. beam headlamps.

Note: to switch off the rear fog lampand the front fog lamps, turn the ringFront fog lamps* and rear fog backwards twice in succession.lamp

Rotate the ring forwards to switch onand backwards to switch off. The statusis confirmed by the light on the instru-ment panel.

THE LIGHTS STALKIn good or rainy weather,both day and night, theFront and rear lights Vehicles fitted with a rear fog rear fog lamp is dazzlinglamp (ring B)Selection is by turning ring A. and is prohibited.Do not forget to switch

the fog lamp off when it is no lon-Rear fog lamp ger needed.

Lights off This operates with the dipped/mainbeam headlamps.

Direction indicators (flashers)Side lights on Vehicles fitted with front fog lampsand a rear fog lamp (ring C)* Left : downwards.

Right : upwards.Dipped/Main beamFront fog lamps (first rota-headlampstion of the ring forwards)

Automatic switching These operate with the side lightson of lights* and the dipped beam lamps. * According tospecification

YOUR 307 IN DETAIL

AUTOMATIC SWITCHING ON Operating checkOF LIGHTS* Triggering of the sensorSide lights and dipped beam head- Acivation of this function is accom-lamps switch on automatically if the panied by an audible signallight is poor, or during operation of "Automatic lighting'' on the multi-the windscreen wipers. They switch function display.off as soon as the light becomes

The light also comes on as soon asbright enough or the windscreenthe driver changes the stalk positionwipers stop.to 0.Note : In foggy weather the bright-

ness sensor can detect sufficientlight. As a consequence, the lights Disarmingwil not come on automatically.

Disarming of the function is accom-This function is active when the panied by an audible signalvehicle is supplied to the customer.Note: the function is temporarilyTo disarm or activate the function: disarmed when the driver uses the

Start with the key in the accesso- manual lighting controls.ries position (1st notch), If the brightness sensor does not

Press the end of the stalk for function correctly, the system acti-more than two seconds. vates the function (the lights come

on).Note: after the ignition is switchedoff and depending on the brightness, The driver is alerted by an audiblethe lights remain on for 45 seconds signal, accompanied by the messa-or until the vehicle is locked. ge "Automatic switching on of

lights faulty".Contact a PEUGEOT dealer to haveDo not cover the brightness sen-the system checked.sor located in the centre of the

fascia. It is used for automaticswitching on of the lights.

*According to specification

YOUR 307 IN DETAIL

Operation Automatic timed windscreenwipers*In position 1 or 2, when the vehicle

stops, the windscreen wiper changes In the AUTO position, the wind-to a lower wiping speed, then resumes screen wipers operate automaticallyits initial speed when the vehicle starts and adapt their speed to the intensi-again. ty of the rainfall.When the ignition has been swit-ched off for more than a minute withthe control in the AUTO* position, it

Operating checkis necesary to reactivate this func-tion. To do this, move the control to any Activationposition, then move it back to theAUTO* position. When the function is activated, the

message "Automatic windscreenwiping active" appears on the mul-

Screenwash and headlamp tifunction display.WINDSCREEN WIPER STALKwash*

Front windscreen wipers Pull the windscreen wiper stalk Switching offtowards you. Switching off the function is accom-2 Fast wipe (heavy rain)The windscreen wash then the wind- panied by an audible signal.1 Normal wipe screen wipers operate for a fixed In the event of malfunction, the driver(moderately heavy rain) period. The headlamp wash ope- is informed by an audible signal andAUTO Automatic wipe* rates simultaneously for a few the message "Auto windscreenseconds, only if the dipped beam0 Off wiper faulty" on the multifunctionor main beam headlamps are on. display.Single wipe (press downwards)

In the event of malfunction in theAUTO position, the windscreenwiper will operate in intermittentmode.Contact a PEUGEOT dealer to havethe system checked.


YOUR 307 IN DETAIL

Rear windscreen wiper Maintenance positionWhen using an automaticThis position enables the wiper bladecar wash, switch off theto be removed.ignition or check that the Turn ring A to the first notch for inter-

wiper control is not in the mittent wiping. In the minute following switching offautomatic position. of the ignition, any action on the stalk

positions the wipers in the centre ofIn winter it is advisable to wait forthe windscreen (winter parking, clea-the windscreen to completelyning, replacing the blades).clear of ice before operating the

automatic wipe. To reposition the wipers after thisRear windscreen washhas been done, switch on the ignitionand operate the stalk.

Turn ring A past the first notch; thewindscreen wash then the wind-screen wiper operate for a specifiedtime.


YOUR 307 IN DETAIL

TRIP COMPUTER*

Each successive press on the end of the wash/wipe stalk displays in turn:

Display B

- the date,- the remaining range,- the distance travelled,- the average consumption,- the current consumption,- the average speed.

Zero resetPress the stalk for more than two seconds.


YOUR 307 IN DETAIL

Range Average consumption Distance travelledThe display shows the distance This is the ratio between the amount This shows the distance travelledwhich can still be covered with the of fuel consumed and the distance since the computer was last reset tofuel remaining in the tank. travelled since the computer was last zero.

reset to zero.Note : this figure may rise if there isa change in driving style or road sur- The display stops at 10 mpgface, accompanied by a significant (30 l/100km). After the trip computer has beendrop in current fuel consumption. reset to zero, the range data

becomes meaningful only after theIf there are less than 3 litres of fuel invehicle has been in use for a certainthe tank, only three segments will beperiod.displayed.If horizontal segments are displayedinstead of figures when driving,contact a PEUGEOT dealer.

Current consumption Average speedThis gives the fuel consumption This is obtained by dividing the dis-recorded during the last two tance travelled by the period of timeseconds. This function is displayed the vehicle has been in use (with theonly when the vehicle is travelling at ignition on), since the computer wasapproximately 15 mph (20 km/h). last reset to zero.The display stops at 10 mpg(30 l/100km).

YOUR 307 IN DETAIL

You have two options*:

Manual operation: press or pull switch 1 gently. The

window stops as soon as theswitch is released.

Automatic operation*: press or pull switch 1 fully. This

opens or closes the window com-pletely.

Safety auto-reverse*When the window on the driver'sside rises and meets an obstacle, itstops and lowers again.

ELECTRIC WINDOWS Rear quarter lights (3 door)Note: In the case of frost or afterreconnecting the battery, if the win-

To partially open the rear windows,dow will not rise, pull the switch until1 - Driver's electric window switch. tilt lever A then push the window.it closes completely and hold it forone second to reinitialise the system.2 - Passenger's electric window

switch.

3 - Rear right electric windowswitch*.

4 - Rear left electric window switch*.

5 - Disarming of the rear electricwindow switches (child lock)*.


YOUR 307 IN DETAIL

INTERIOR MIRRORThe interior mirror has two positions:- day (normal),- night (anti-dazzle).To change from one to the other,push or pull the lever on the loweredge.

EXTERIOR MIRRORS Manual exterior mirrorsMove the lever in all four directionsElectric rear view mirrors*to adjust.

Turn knob A to the right or to the When the vehicle is parked, the exte-left to select the corresponding rior mirrors can be folded backmirror. manually.

Move knob B in all four directionsto adjust.

Return knob A to the centre posi-The exterior mirror on thetion.driver's side is convex*When parked, the mirrors can be (outer edge defined by a AREAS FOR TOLL CARDS /folded back manually, electrically* by dotted line) in order to eli- CAR PARK TICKETSpulling knob A rearwards or automa- minate the "blind spot".

tically* when locking the vehicle.As a result, objects observed in The athermic windscreen has twoThe exterior mirrors are unfolded by the driver's and passenger's mir- non-reflective zones located eitherswitching on the ignition to the rors are in reality closer than they side of the base of the interior mirror.second notch or to the ON position. appear. They are intended for affixing tollNote : the folding back function This must be taken into account cards and/or car park tickets.when locking the vehicle can be to correctly judge the distance of

disarmed. Contact a PEUGEOT dea- vehicles approaching fromler. behind.


YOUR 307 IN DETAIL

ADJUSTING THE HEADLAMPS HAZARD WARNING LIGHTS STEERING WHEEL HEIGHTAND DEPTH ADJUSTMENT

Depending on the load in your Press the button, the direction indi-vehicle, adjusting the beam of the cators flash. When the vehicle is stationary,headlamps is recommended as fol- unlock the steering wheel by pullingThey can operate with the ignitionlows. handle A.off.0 1 or 2 people in the front seats. Adjust the height and depth of the

steering wheel, then lock it by- 3 people. Automatic lighting of hazard pushing handle A down fully.1 5 people. warning lights*2 5 people + maximum authorised When brak ing in an emergency

load. (depending on the force of decelera- HORNtion), the hazard warning lights come3 Driver + maximum authorisedon automatically. They switch offload. Press one of the spokes or theautomatically the first time you acce- centre of the steering wheel.lerate.

Initial setting is position 0. However, it is also possible to switchthem off by pressing the button.


YOUR 307 IN DETAIL

SUN VISOR WITHILLUMINATED COURTESYMIRROR*

COURTESY LIGHTSWith the ignition on, the mirror isautomatically lit up when the flap is1 - Front courtesy lightopened.

2 - Map reading lights3 - Rear courtesy lightWith the key in the accessories position (1st notch) or with the ignition on, ope-rate the relevant switch.The front and rear courtesy lights come on when the ignition key is removed, onunlocking the vehicle or on opening one of the doors.They gradually go off after the ignition has been switched on or the vehicle is locked.

Pressing switch 1 turns on the front and rear courtesy lights for a duration often minutes.

Pressing switch 3 turns on the rear courtesy light for a duration ofROOF CONSOLEten minutes.

Note: The courtesy lights can be deactivated by pressing switch 1 for more thanThe front courtesy light and a spec-three seconds. However, a short press on switch 1 switches the courtesy light ontacles holder are fitted in the roofand off.console.The map reading lights are not affected by this and may be switched on.To open or close the spectacles hol-

To re-activate the lights, press the switch for more than three seconds. der, press the recess in the cover.


YOUR 307 IN DETAIL

INTERIOR LAYOUT

1 - GloveboxThis is fitted with a lock.To open the glove box, lift the handle.The glove box lights when the lid is opened.It contains a ventilation nozzle that can be closed*, distributing the same conditioned air as the vents of the passengercompartment, and three sockets* for connecting video equipment.The layout allows storage of a water bottle, a pen, the vehicle handbook, a pair of spectacles, tokens etc.

2 - Front ash trayPull the lid to open the ashtray.To empty it after opening, press the tab and extract the ashtray.

3 - Storage4 - 12 volt accesories socket

This is a lighter type socket, fitted with a cap. It is supplied with current from the accessories position (1st notch).

5 - Door tray6 - Cup / can holder7 - Coin storage8 - Rubbish container

To empty this, open it fully (past the point of resistance) then pull on the receptacle to remove it.To refit, lock it in place on the cover.


YOUR 307 IN DETAIL

BOOT LAYOUT

1 - Rear parcel shelfTo remove the shelf:unhook the two strings,slightly raise the shelf, then remove it.There are several options for storing the shelf:either behind the front seats,or behind the rear seat.

2 - Hooks

3 - Stowing rings

4 - Luggage retaining net*Hooked onto the stowing rings, this enables your luggage to be secured.

5 - Open storage trays

6 - Socket for accessories*This is a 12 volt socket (lighter type), installed on the left side of the parcel shelf.It is supplied with the ignition off.

*According to specification

YOUR 307 IN DETAIL

Moving Off"PORSCHE TIPTRONIC SYSTEM" AUTOMATIC GEARBOXWith the engine running, to move offThe four speed automatic gearbox offers a choice between the comfort of inte-from position P:gral automatic operation , enhanced by a sport and a snow programme, or the it is essential to press thepleasure of manual gear changing.

brake pedal to exit position P, select function R, D or M, then

gradually release the pressureGear selection gate on the brake pedal; the vehiclemoves off immediately. Move the lever in the gate to select a function.

You can also start from function N:Once the function is selected, the corresponding indicator light appears on release the handbrake, with yourthe instrument panel display.

foot on the brake, select function R, D or M, then

S : sport programme. gradually release the pressureon the brake pedal; the vehiclemoves off immediately.: snow programme.

WARNINGPark: to park the vehicle or start the engine, with thehandbrake on or off. When the engine is at idle, brakes

not applied, if function R, D or M isselected the vehicle moves evenReverse: for reversing (select this function with the without the accelerator being pres-vehicle stationary, engine at idle).sed.For this reason, do not leavechildren unsupervised inside the

Neutral: to start the engine and to park, with the hand- vehicle, with the engine running.brake on. When maintenance operations need

to be carried out with the engine run-Note: if position N is inadvertently engaged while dri-ning, apply the handbrake and selectving, allow the engine to return to idle before engagingposition P.function D to accelerate.

Drive : for driving in automatic mode.

Manual: for driving in manual mode.

YOUR 307 IN DETAIL

Automatic operation Manual operationIf you take your foot off the accelera-tor suddenly, the gearbox will not

Automatic changing of the four Manual changing of the four gears:change to a higher gear for reasonsgears: select function M on the gate,of safety. select function D in the gate. push the lever to the + sign toThe gearbox always selects the most change to a higher gear,Sport and snow programmessuitable gear according to the follo- pull the lever to the - sign towing parameters: In addition to the auto-adaptive pro- change to a lower gear.

gramme, there are two special pro-- the style of driving, You can change from position D (dri-grammes. ving in automatic mode) to position- the road profile,The programme is displayed on the M (driving in manual mode) at any- the vehicle load. instrument panel screen. time.

The gearbox is then operating inSport programmeauto-adaptive mode, without any

Noteaction on your part. Press button S once the vehicleIt is only possible to change from onehas been started and function DWARNING gear to another if the vehicle speedselected.

Never select position N when the and engine speed permit. If they doThe gearbox automatically favoursvehicle is moving. not, the vehicle will operate tempora-sporty driving and more dynamicrily in automatic mode.Never select functions P or R unless acceleration.

the vehicle is stationary. When the vehicle is stationary orSnow programme moving very slowly, the gearboxNever change between functions to

automatically selects gear M1.optimise braking on a slippery surface. This programme improves starting (snow)Programmes S (sport) andand drive when traction is poor.do not operate in manual mode.once the vehicle Press buttonNotes

has been started and function DFor immediate maximum accelera- selected.tion without touching the gear lever, The gearbox adapts to driving onpress the accelerator pedal down as slippery roads.far as it will go (kickdown). The gear-

Note: you can return to the auto-box will automatically change downadaptive programme at any time.or maintain the gear selected until

again tomaximum engine speed is reached. Press button S orswitch off the programme you areWhen the brake is applied, the gear-in.box will automatically change down

in order to provide efficient enginebraking.

YOUR 307 IN DETAIL

Operating abnormality HANDBRAKE When this warning lightcomes on, accompanied by

Any operating abnormality is indica- an audible signal and theLockingted by an audible signal accompa- message "Braking fault", itnied by the message "Automatic Pull the handbrake to immobilise indicates that there is a mal-gearbox faulty" on the multi-func- your vehicle. function of the electronic brake forcetion display and flashing of the Sport distribution, which can cause a lossWarning: when park ing on a slope,and Snow warning lights on the ins- of control of the vehicle when bra-direct your wheels towards the pave-trument panel. In this situation the king.ment and pull the handbrake.gearbox operates in downgrade Stop immediately.mode (locked in 3rd gear). You may

Contact a Peugeot dealer.feel a substantial knock when chan-Unlockingging from P to R and from N to R

(this will not cause any damage to Pull on the handle and press the but-the gearbox). ton to release the handbrake.Do not exceed 60 mph (100 km/h),speed restrictions permitting. Normal operation of the ABS may

Illumination of this light, make itself felt by slight vibrationsContact a PEUGEOT dealer as soon accompanied by an audible of the brake pedal.as possible. signal and the message In emergency braking, press"handbrake on" on the very firmly without releasingmultifunction display, indi- the pressure.cates that the handbrake is still on orhas not been properly released.

EMERGENCY BRAKINGABS ANTI-LOCK BRAKINGASSISTANCE SYSTEMSYSTEMIn an emergency, this system enablesThe ABS system with Electronicthe optimum braking pressure to beBrake Force Distribution (EBFD)reached more quickly, thus reducingincreases the stability and manoeu-the stopping distance.vrability of your vehicle, particularly

on poor or slippery road surfaces. It is triggered by the speed at which theIf the battery is flat and brake pedal is activated, the effect ofNote: when changing wheels (tyresthe lever is in position P, it which is a reduction in the resistance ofand rims), make sure that these arewill be impossible to the pedal and an increase in brakingapproved.change to another posi- efficiency.The anti-lock braking system comestion. into operation automatically when

there is a risk of wheel lock.

YOUR 307 IN DETAIL

TRACTION CONTROL (ASR)* Disarming the ESP / Operating checkASR systemsAND DYNAMIC STABILITY

When a malfunction of theCONTROL (ESP)* In certain conditions (vehicle stuck insystem occurs, the switchmud or snow, or on loose ground...),light flashes and the indica-These systems are linked and com- it could prove useful to disarm thetor light comes on, accom-plement the ABS system. ASR system to make the wheelspanied by an audible signalspin and regain grip.The ASR system optimises drive to and the message "ESP/ASR notprevent the wheels skidding, by operational" on the multifunctionacting on the brakes and the engine. display.It also allows the directional stability

Press the switch "ESP OFF", Contact a PEUGEOT dealer to haveof the vehicle to be improved onthe system checked.situated on the central part of theacceleration.

fascia.If there is a variation between the tra-jectory followed by the vehicle andthat required by the driver, the ESPsystem automatically acts on the The switch lights up and the The ESP system offersengine and the brake of one or more indicator light comes on; the increased safety duringwheels, in order to put the vehicle ESP and ASR systems no normal driving, but shouldback on course. longer act on the brake and not incite the driver to

engine operation. take risks or to drive athigh speed.The operation of the system isThey engage again: ensured to the extent to which the

automatically when the ignition is recommendations of the manufac-switched off, turer regarding the wheels (tyresOperation of the ASR and and wheel rims), the brak ing com- manually by pressing the switchESP systems ponents, the electronic compo-again.

nents and the assembly and repairprocedures within the PEUGEOTWhen one of these two sys-network are observed.tems is operating, this lightAfter an impact, have the systemflashes.checked by a PEUGEOT dealer.

* During the year

YOUR 307 IN DETAIL

Operation Changing a memorised speed Place switch 1 in the ON position. To memorise a speed higher than

the previous one: press button 3;A speed can be memorised. release it when you have rea-

ched the required speed. Place switch 1 in the OFF posi-tion to cancel.

To memorise a speed lower than theprevious one:

Memorising a speed press button 2;

As soon as you reach the chosen release it when you have rea-speed, press button 2 or 3. ched the required speed.This memorises the speed, whichCRUISE CONTROL* will be maintained automatically.

Cancelling the cruise controlNote: It is possible to accelerateCruise control enables the vehicle to place switch 1 in the OFF posi-momentarily without disarming themaintain a steady speed program-

cruise control.med by the driver, regardless of the tion or switch off the ignitionroad characteristics and without thedriver having to touch the accelerator

Do not use cruise control on slipperyCancelling the memorisedor brake pedals.roads or in heavy traffic.speedIn order for it to be memorised, the

vehicle speed must be greater than If you wish to cancel the memorisedapproximately 25 mph (40 km/h). speed:

Press button 4 or the brake orclutch pedal.

The warning light goes out to indica-te that the cruise control is disarmed.

Recalling the memorisedspeedAfter cancellation, press button 4.Your vehicle will return to the lastmemorised speed.


YOUR 307 IN DETAIL

AIR BAGSThe air bags have been designed tomaximise the safety of the occupantsin the event of serious collisions;they work in conjunction with theforce limiting seat belts.In the event of a serious collision, theelectronic detectors record and ana-lyse any abrupt deceleration of thevehicle: if the triggering threshold isreached, the air bags inflate instantlyand protect the occupants of the

Disarming the passenger airvehicle.bag*Immediately after the impact, the air

bags deflate rapidly, so that they do To ensure the safety of your child,not hinder the visibility of the occu- it is essential to disarm the pas-FRONT AIR BAGSpants nor their possible exit from the senger air bag when you install avehicle. rear-facing child seat on the frontThese are folded in the centre of the passenger seat.The air bags will not be deployed in steering wheel for the driver and incollisions which are not serious, for With the ignition switched off,the fascia for the front passenger.which the seat belt is sufficient to insert the key into the passengerThey are deployed simultaneously,provide maximum protection. The air bag disarming slot 1, turn it toexcept in cases where the air bag isseriousness of the collision depends the "OFF" position, then removedisarmed.on the nature of the obstacle and the it keeping it in this position.speed of the vehicle at the moment

The air bag warning light on the instru-of impact. Front air bag malfunction ment panel is lit throughout the disar-ming process.If this warning light comesAir bags operate only when the on, accompanied by a buz-ignition is switched on. zer and the message "Air

Note: the gas escaping from the air bag fault" on the multifunc-bags can be a minor irritant. tion display, contact a

PEUGEOT dealer to have the sys-tem checked.

* According to country

YOUR 307 IN DETAIL

SIDE AIR BAGS* ANDIn the "OFF" position the passengerair bag will not be deployed in an CURTAIN AIR BAGS*impact.

The side air bags are incorporatedAs soon as the child seat is remo-into the front seat backs on the doorved, turn the air bag slot to the "ON"side.position to re-activate the air bag and

thus ensure the safety of your pas- The curtain air bags are incorporatedsenger in the event of an impact. into the door pillars and the upper

part of the passenger compartment.They are deployed independently ofeach other depending on which sidethe collision occurs.

Operating checkThis is confirmed by an indicator Operating checklight, accompanied by an audible

This is confirmed by an indicatorsignal and a message on the multi-light, accompanied by an audiblefunction display.signal and a message on the multi-function display.

With the ignition on (2ndnotch), illumination of this If this indicator light comeswarning light accompanied on, accompanied by anby an audible signal and the audible signal and the mes-message "Passenger air sage "Air bag(s) faulty" on

bag disarmed" on the multifunction the multifunction display,display, indicates that the passenger contact a PEUGEOT dealer to haveair bag is disarmed (slot in the the system checked."OFF" position).


YOUR 307 IN DETAIL

For the front and side air bags* to be fully effective, observe the following safety rules:

· Wear a correctly adjusted seat belt.· Sit in a normal upright position (passengers must not place their feet on the fascia).· Do not leave any accessories, objects or pets between the occupants and the air bags. It could hamper the

operation of the air bags or injure the occupants.· All work on the air bag system is strictly forbidden unless it is carried out by an approved PEUGEOT dealer.· After an accident or if the vehicle has been stolen or broken into, have the airbag systems checked.· The air bag systems have been designed to be fully operational for 10 years from the date of registration of the

vehicle. Have them replaced by a PEUGEOT dealer after this period.

Front air bags· Do not drive holding the steering wheel by its spokes or resting your hands on the centre part of the wheel.· Smoke as little as possible; deployment of the airbags can cause burns or the risk of injury from a cigarette or pipe.· Never remove or pierce the steering wheel or hit it violently.

Side air bags*· Do not fix or glue anything to the backs of the front seats. This could cause injury to the chest or arms when the side

air bag inflates.· Do not sit with the upper part of the body any nearer to the door than necessary.· Only put approved covers on the seats. Contact your PEUGEOT dealer.

Curtain air bags*· Do not fasten or glue anything to the door pillars or to the roof as this could cause head injuries when the curtain air

bag inflates.· Do not remove the bolts from the handles on the roof; they help to secure the curtain air bags.


PRACTICAL INFORMATION

2 LITRE HDI TURBO DIESEL 3 - Coolant reservoir 7 - Air filter

ENGINE (90 bhp/110 bhp) 8 - Dipstick4 - Brake fluid reservoir

9 - Engine oil filler cap1 - Power steering reservoir5 - Battery

10 - Priming pump*2 - Windscreen/headlamp washreservoir* 6 - Fuse box * According to specification


CHECKING THE LEVELS Viscosity selection Slacken the cap to the first notch torelease the pressure to prevent any

In all cases, the oil selected must risk of scalding. When the pressureOil level meet the manufacturer's require- has dropped, remove the cap andments. Check the level regularly and top top up the level.

up between changes. The maxi- Brake fluid level:mum consumption is 0.5 l per 600 Note : the coolant does not need tomiles (1000 km). - The level must always be between be changed.

the DANGER and MAXIMUMCheck the level with the vehiclemarks in the reservoir. Used oillevel, engine cold, using the oil level

gauge on the instrument panel or - If the level drops substantially, Do not dispose of used oil, brakethe dipstick. contact a PEUGEOT dealer imme- fluid or coolant into drains or into the

diately. ground.Fluid change:Dipstick- must be carried out according to Power steering reservoir

the manufacturer's servicing sche-There are two marks on Open the reservoir, with the engi-dule,the dipstick : ne at ambient temperature. The- use fluids approved by the manu-A = maximum level should always be above thefacturer, which fulfil DOT4 stan- MIN. mark and close to the MAX.Never fill past this mark. dards.

mark.B = minimumTo maintain the reliability WARNING: brake and clutch fluid isof engines and emission harmful to health and very corrosive. Windscreen and headlampcontrol systems, the use Avoid all contact with the sk in. wash reservoir*of additives in engine oilis prohibited. For best quality cleaning and for yourCooling system

safety, we recommend that you useUse the fluid approved by the manu- products approved by PEUGEOTfacturer. (reservoir capacity 3.5 litres or 6.5When the engine is warm, the tem- litres with headlamp wash).perature of the coolant is controlledOil change by the engine fan. As this fan can

According to the information given in operate with the ignition key remo-"PEUGEOT SERVICING". ved and because the cooling system

is pressurised, wait for at least onehour after the engine has stoppedWARNING: avoid used oil frombefore carrying out any work.coming into prolonged contact with

the sk in.* According to specification


CHECKS Manual gearbox RUNNING OUT OF FUEL(DIESEL)This does not need an oil change.

Battery Check the level, according to the If you should run out of fuel, it ismanufacturer's servicing schedule.At the start of winter, have your bat- necessary to re-prime* the circuit:tery checked by a PEUGEOT dealer.

Automatic gearbox* 2 litre HDI engineAir filter and pollen filterThis does not need an oil change.

- fill the fuel tank with at least fiveHave the filter elements replaced Have the level checked by alitres of diesel,regularly. If you drive in dusty PEUGEOT dealer, according to the

conditions, change them twice as manufacturer's servicing schedule. - operate the manual re-primingoften. pump, until you feel resistanceduring the manoeuvre,Oil filter

Brake pads - operate the starter until the engineChange the filter regularly, in accor- starts.Brake pad wear depends on the dance with the servicing schedule.style of driving, in particular forvehicles which are used in town,

1.4 litre HDI engineover short distances. It may benecessary to check the thickness of - fill the fuel tank with at least fivethe pads, even between services. litres of diesel,

- operate the manual re-primingHandbrake pump, until fuel appears in the

transparent pipe under the bonnet,Where the handbrake travel is toogreat or there is a reduction in the - operate the starter until the engineperformance of the system, the starts.handbrake should be adjusted, even Only use products appro-between services. ved by Automobiles

PEUGEOT.Have the system checked by aTo ensure best perfor-PEUGEOT dealer.mance from components

as important as the power stee-ring and the brak ing system,PEUGEOT selects and offersquite specific products.



CHANGING A WHEEL Tools Removing the wheel Place the holder and the chock 3The following tools are located in aParking the vehicle polystyrene holder in the centre of (or chock 3 on its own if neces-

the spare wheel: sary) under the wheel diagonally Park the vehicle on level, stableopposite to the one to be changed.and non-slippery ground.

Remove the trim*, using the1 - Wheelbrace. Apply the handbrake, engagewheelbrace 1, pulling at the valvefirst or reverse gear (position P 2 - Centralising tool. passage hole.for the automatic gearbox) and

switch off the ignition. Loosen the wheel bolts (for3 - Removable chock.vehicles fitted with alloy wheels,4 - Jack with handle. remove the chrome trim first. See

Access to the spare wheel paragraph on "Special features5 - Removable towing eye.and the jack in the boot of alloy").6 - Alloy wheel bolt trim remover*. Lift the floor using the handle and

secure it by hooking the cords tothe hooks of the parcel shelf.



For your safety, alwayschange the wheel:

- on level, stable, non-slipperyground,

- with the handbrake on and theignition switched off,

- with first or reverse gear enga-ged (position P for the automaticgearbox),

- with the vehicle chocked.

Never go underneath a vehiclethat is supported only by a jack Partly tighten the bolts using the Place the jack 4 in contact with(use a ramp)wheelbrace 1.one of the four locating points A

on the sub-frame, (the one which Fold the jack and 4 and remove it.is closest to the wheel to be After changing the wheel: Fully tighten the bolts using thechanged). - have the tightening of the boltswheelbrace 1.

Extend the jack 4 until its base is and the tyre pressure checked Replace the wheel trim*, startingin contact with the ground. by a PEUGEOT dealer as soonby placing the wheel trim notchEnsure that the centre line of the as possible.opposite the valve, and press itbase of the jack is straight above - have the punctured wheel repai-on using the palm of the hand.the locating point A. red and refit it to the vehicle as Put the tools and the wheel back Raise the vehicle. soon as possible.in the boot.

Unscrew the bolts and removeNote: a diagram on the holder indi-the wheel.cates the location of the tools.Tighten the spare wheel securing

Fitting a wheel strap to prevent noise and for yoursafety in the event of impact. Position the wheel using the cen-

tralising tool to assist you. Tighten the bolts by hand and

remove the centralising tool.



Special features of alloy Anti-theft bolts**wheels* If your wheels are fitted with an anti-

theft bolt (one per wheel), the chro-Bolt coversFitting the spare wheel me trim and then the plastic cover

Alloy wheel bolts are covered by must be removed using tool 6, befo-If your vehicle is fitted with a steelchrome trims. re unscrewing the bolt using one ofspare wheel, when fitting it, it is nor-Use tool 6 to remove the trims befo- the two anti-theft sockets (whichmal to notice that the bolt washersre slackening the bolts. were given to you on delivery of yourdo not come into contact with the vehicle along with the duplicate keysrim. The spare wheel is secured by and the confidential card) and thethe cone shape of each bolt. Tighten wheel brace 1.the bolts fully.

Note : make a careful note of theFitting snow tyres code number engraved on the head

of the anti-theft socket. This willIf you fit snow tyres mounted on steel enable you to obtain duplicate anti-wheels, it is essential to use specialtheft sockets from a PEUGEOT dealer.bolts available from your PEUGEOT

dealer.

* According to specification** According to model and country


CHANGING A BULB The headlamps are fitted with polycarbonate glass with aprotective coating. Do not clean them with a dry orabrasive cloth, nor with a detergent or solvent pro-Front lights duct. Use a sponge and soapy water.

Note: on the right side, remove the style cover, fixed withtwo plastic screws, to access the bulbs. Handle the bulbs 4 - Side lights: (W 5 W).with a dry cloth.

Pull the socket rearwards, remove the bulb andchange it.1 - Dipped beam headlamps: (H7-55W),

2 - Main beam headlamps: (H1-55W), 5 - Direction indicators: (PY 21 W amber).3 - Front fog lamps* (H1-55 W). Turn the bulb holder a quarter turn and remove it. Turn the protective cover corresponding to the faulty Change the bulb.

bulb a quarter of a turn and remove it. Note: In certain climatic conditions (low temperature, Disconnect the connector. humidity), condensation inside the headlamp glass is Press the end of the securing clip to free it. Change normal ; it disappears a few minutes after the lights are

switched on.the bulb.When fitting the new bulb, ensure that the directionnotches are positioned correctly and the securing clipis fixed properly.

Reconnect the connector. Refit the protective cover, positioning it with the arrow

upwards, then turn it a quarter of a turn to the right.



Change the faulty bulb.When refitting, take care to pass thetrim under the seal.

Number plate lights (W 5 W) Remove the lens. Change the faulty bulb.

Direction indicator repeaters: Rear lights(WY 5W amber).

1 - Direction indicators (P 21 W). Push the repeater forwards and2 - Reversing lights (P 21 W), rightrelease the assembly.

side. Hold the connector and turn the Fog lamp (P 21 W), left side.lens a quarter turn.

3 - Brake lights (P 21 W). Change the bulb. 4 - Side lights (R 5 W). Third brake light (4 W5W

bulbs)These 5 bulbs are changed frominside the boot: Using a 10 mm box spanner, Raise and hook up the boot mat, unscrew the 2 fixing nuts 1. Remove the boot sill trim, which Release the lamp unit by pushing

Amber coloured bulbs is fixed by two plastic nails, it outwards.(direction indicators and

Move aside the boot trim to Squeeze the two tabs 2 to relea-side repeaters), must beaccess the bulb holder, se the bulb holder.changed for bulbs of

identical specification Press the tab and remove the Change the faulty bulb.and colour. bulb holder,

When refitting, ensure that thelamp unit seal has been put backin place correctly.


CHANGING A FUSEThe fuse boxes are located underthe fascia (driver's side) and in theengine compartment.The spare fuses and special pliers Aare fixed to the inside of the lid of theinstrument panel fuse box.

Removing and changing afuseBefore changing a fuse you must Instrument panel fusesestablish the cause of the fault andhave it corrected. The fuse numbers Unscrew the bolt a quarter of aare indicated on the fuse box. turn with a coin, then pull the

handle to open the cover and Use the special pliers A.access the fuses.

Always change a faulty fuse forone of the same rating.

Fuse no. Rating* Functions*

1 10 A Rear fog lamp.

2 15 A Rear screen wiper.

Correct Incorrect 4 15 A Front electric window - sunroof.

5 15 A Rear brake light including trailer.

7 20 A Rear courtesy light, front courtesy light, map readers -Lighter - Glove box lighting.

Pliers A


Fuse no. Rating* Functions*

9 30 A Electric windows - Press operation windows (incompatible with non-press operationwindows) - Sunroof.

10 15 A Diagnostic socket - 12 volts rear socket.

11 15 A Audio equipment - Multifunction display B - Steering whel controls - Automatic gearbox.

12 10 A Front right side lights, rear right side lights, number plate and trailer lighting -Central locking switches/ alarm/ESP/hazard warning lights - Air conditioning/ashtray light - Heated seats switches - Lighter - Automatic gearbox switches -Headlamp beam corrector.

14 30 A Door opening/closing controls - Deadlocking controls.

15 30 A Rear windows.

16 5A Engine fuse box - Alarm - Particulate emission filter - Steering wheel controls - Airbags.

17 10 A Rear right brake light, additional brake light Front electric window/sunroof.

18 10 A Diagnostic socket - Steering wheel controls - Brake pedal (stop) and clutch switches -Coolant level switch - Second brake switch.

19 30 A PARC shunt.

22 10 A Front left side light, rear left side light - Number plate and trailer lighting.

23 15 A Alarm siren - Interior alarm control unit.

24 15 A Instrument panel - Audio equipment - Multifunction display - Air conditioning.

26 30 A Heated rear screen.



Engine compartment fuses The electrical system ofFuse box your vehicle is designed

to operate with standardTo access the fuse box in the engine or optional equipment.compartment (next to the battery):

unclip the cover. Before installing other electricalequipment or accessories on your

Carefully close the cover and refit vehicle, contact a PEUGEOT dea-the style cover when you have ler.finished.

PEUGEOT will not accept respon-sibility for the cost incurred inrepairing your vehicle or for recti-fying the malfunctions resultingfrom the installation of accesso-ries not supplied and not recom-mended by PEUGEOT and notinstalled in accordance with itsFuse N° Rating* Functions*instructions, in particular where

1** 30 A Fan unit. the equipment in questionconsumes more than 10 milliam-2** 30 A ESP/ABS pump motor. peres.

3** 30 A ESP/ABS solenoid valves.** The maxi-fuses provide additio-4** 60 A Built-in Systems Interface supply. nal protection for the electricalsystems. All work must be carried5 70 A Built-in Systems Interface supply.out by a PEUGEOT dealer.

6 20 A Heated seats.

7 30 A Ignition switch, power.

8** 70 A Power steering electro-pump unit.


Fuse N° Rating* Functions*

1 10 A Automatic gearbox reversing lights switch - Automatic gearboxstarting inhibitor relay control - Manual gearbox reversinglights switch - Vehicle speed sensor - Pre-heating control unit -Water in diesel sensor - DW air flow sensor.

2 15 A Canister solenoid valve - Fuel pump.

3 10 A Power steering control unit - ABS or ESP control unit.

4 10 A Injection control unit - Fan unit relay control - Additional heating relay control -Automatic gearbox control unit - Automatic gearbox sequential control -Automatic gearbox shiftlock relay.

5 15 A Particulate emission filter control unit.

6 15 A Front fog lamps.

7 20 A Headlamp wash pump.

8 20 A Fan unit relay control - Injection supply control unit.

9 15 A Left dipped beam

10 15 A Right dipped beam

11 10 A Left main beam

12 10 A Right main beam

13 15 A Horn

14 10 A Front and rear headlamps wash pump

15 30 A Oxygen sensors - Exhaust gas recirculation solenoid valve - Ignition coil -Diesel high pressure regulator - Injectors supply (petrol).

16 40 A Petrol engine air pump with automatic gearbox.

17 30 A Low/high speed front wiper.

18 40 A Air conditioning blower.* According to specification.

0PRACTICAL INFORMATION

CHANGING A WINDSCREEN ECONOMY MODE FUNCTION LOAD REDUCTIONWIPER BLADE

When driving, certain functions (airAfter the engine has stopped, certainconditioning*, heated rear screen,functions (windscreen wiper, electricPlacing the wiper blades in heating system for passenger com-windows, sunroof*, courtesy lights,the maintenance position partment of diesel vehicles, etc.)audio equipment etc.) can only bemay be switched off temporarily,used for thirty minutes, to prevent Less than one minute after swit-depending on the level of batterydischarging the battery.ching off the ignition, activate thecharge.windscreen wiper stalk to posi- Once the thirty minutes are over, theReactivation of these functions istion the blades in the centre of message "Economy mode active"automatic, once the battery charge isthe windscreen (maintenance appears on the multifunction displaysufficient.position). and the active functions are put on

standby. Note: at the risk of discharging thebattery, the functions that have beenTo resume use of these functions,Replacing a blade switched off may be reactivatedstart the engine and let it run for amanually.few seconds. Lift the arm, then unclip the blade

WARNING: a flat battery will preventand remove it.the engine from starting.

Fit the new blade and fold downthe arm.

Note: the shortest blade is fitted tothe wiper arm on the right side of thevehicle.

To park the blades, switch on theignition and operate the wind-screen wiper stalk.



BATTERY- Never disconnect a ter-

To charge the battery using a battery charger: minal when the engineis running.

- Disconnect the battery.- Never charge a battery without- Follow the instructions for use given by the battery charger manufacturer.

first disconnecting the terminals.- Reconnect starting with the negative (-) terminal.- Close the sunroof before discon-- Check that the terminals and connectors are clean. If they are covered with

necting the battery. If it does notsulphate (white or greenish deposit), disconnect them and clean them.operate normally followingreconnection of the battery you

To start the vehicle from another battery: must reinitialise it by turning thecontrol to the maximum tilt posi-

- Connect the red cable to the positive (+) terminals of the two batteries. tion and pressing it for an exten-- Connect one end of the green or black cable to the negative (-) terminal of the ded period.

slave battery.- After every reconnection of the- Connect the other end of the green or black cable to an earth point on the bro- battery, switch on the ignition

ken down vehicle as far as possible from the battery. and wait 1 minute before starting- Operate the starter, let the engine run. to allow the electronic systems

to be initialised. If slight difficul-Wait for the engine to return to idle, and disconnect the cables. ties are experienced after this,

please contact a PEUGEOTdealer.

It is advisable to disconnect the batteryif the vehicle is not to be used for a period of more than one month.


Special features of theautomatic gearboxWhen towing with four wheels on theground, the following rules must beobeyed:

- lever in position N,

- tow the vehicle at less than 30 mph(50 km/h) over a maximum distan-ce of 30 miles (50 km).

- do not add oil to the gearbox.

TOWING YOUR VEHICLE

Without lifting (4 wheels on the road)You should always use a tow bar.The towing eye is inside the spare wheel.

From the front: Unclip the cover, by pressing the bottom part, Screw in the towing eye as far as it will go.

From the rear: Unclip the top of the cover using a coin, Screw in the towing eye as far as it will go.

When towing with theengine switched off, there

Lifting (2 wheels only on the road) is no brak ing assistance.

It is preferable to raise the vehicle with a professional lifting device.


TOWING A TRAILER, Driving advice TyresCARAVAN, BOAT ETC. Check the tyre pressures of theDistribution of loads

towing vehicle and of the trailer,Only use original PEUGEOT tow Distribute the load in the trailer so that observing the recommended pres-bars that have been tested and the heaviest items are as close as pos- sures.approved from the design stage of sible to the axle and the nose weightyour vehicle. The tow bar must be approaches the maximum permitted

Brakingfitted by a PEUGEOT dealer. without exceeding it.Your vehicle is basically designed for Towing increases the braking distance.transporting people and luggage but it Coolingmay also be used for towing a trailer.

LightsTowing a trailer on a slope increasesDriving with a trailer subjects thethe temperature of the coolant.towing vehicle to more significant Check the electrical signalling on the

stress and its driver must be particu- trailer.As the fan is electrically controlled,larly careful. its cooling capacity is not dependent

on the engine speed.Air density decreases with altitude, Side windthus reducing engine performance. On the contrary, use a high gear to

Take into acount the increased sen-The maximum towing load must be lower the engine speed, and reducesitivity to side wind.reduced by 10% for every 1000 your speed.

metres of altitude. The maximum towing load on a longclimb depends on the incline and theexterior temperature.In all cases, pay attention to thecoolant temperature.If the warning light comes on, stopthe vehicle and switch off the engineas soon as possible.


REMOVING THE MAT*When removing the mat on the dri-ver's side, push the seat as far backas possible and unscrew the fixings.When refitting, position the mat andreplace the fixings by pressing themin.

FITTING ROOF BARSUse accessories approved byWhen fitting roof bars, use the fourAutomobiles PEUGEOT and followthreads provided for this purpose. Tothe manufacturer's fitting instruc-access these, push the concealingtions.screens in the direction of the arrow.

Maximum authorisedweight on the roof rack:

165 lbs. (75 kg)* According to specification.


ACCESSORIES FOR YOUR 307For your PEUGEOT only use accessories and original parts approved by the manufacturer.

These accessories and parts are all adapted to your PEUGEOT, after being tested and approved for reliability and safe-ty, which PEUGEOT cannot guarantee for other products.

A wide choice of original accessories, approved by PEUGEOT, is available through the dealer network. They all carrythe PEUGEOT guarantee.

Safety : Anti-theft alarms, window engraving, wheel locks, first aid kit, warning triangle, etc.

Comfort : Telephone console, front centre arm rest, covers compatible with side air bags, mats,boot tray, luggage net, door deflectors, CD storage, under shelf storage...

Communication : Audio system, telephone, hands-free kit, speakers, amplifiers, CD changer, navigationsystems, side sun blinds and rear blind....

Customising : Spoiler, alloy wheels, trims, sport exhaust, aluminium or PVC door sills, mud flaps...

Leisure : Tow bar, roof bars, roof box, snow chains, ski carrier, bicycle carrier etc.

Children : Booster seats and child seats...

Maintenance products : Screenwash, interior and exterior maintenance and cleaning products...

Before installing any electrical accessory on your vehicle, contact a PEUGEOT dealer.

TECHNICAL DATA

PETROL ENGINES / COMPANY

ModelsModel codes 3CKFWB/T 3CNFUB 3CNFUE 3CRFNB 3CRFNE

3AKFWB/T 3ANFUB 3ANFUE 3ARFNB 3ARFNE

ENGINES 1,4 litre 1,6 litre 16V 2 litre 16V

Cubic capacity (cm3) 1 360 1 587 1 997

Bore x stroke (mm) 75 x 77 78.5 x 82 85 x 88

EU standard maximumpower (kW) 55 80 99

Maximum power at enginespeed (rpm) 5 500 5 500 6 000

EU standard maximum torque (Nm) 120 150 190

Maximum torque at engine speed (rpm) 3 000 4 500 4 100

Fuel Unleaded Unleaded Unleaded

Catalytic converter Yes Yes Yes

Manual Manual Automatic Manual AutomaticGEARBOX (5 speed) (5 speed) (4 speed) (5 speed) (4 speed)

UNIT CAPACITIES (in litres)

Engine (with cartridge replacement) 3.25 3 3 4.25 4.25

Gearbox-Final drive 2 2 - 1,9 -

TECHNICAL DATA

DIESEL ENGINES / COMPANY

ModelsModel codes 3C8HZB/T 3CRHYB/T 3CRHSB

3ARHYB/T 3ARHYB/T 3ARHSB

ENGINES 1.4 LITRE TURBO HDI 2 LITRE TURBO HDI 2 LITRE TURBO HDI

Cubic capacity (cm3) 1 398 1 998 1 997

Bore x stroke (mm) 73,7 x 82 85 x 88 85 x 88

EU standard maximumpower (kW) 50 66 80

Maximum power at enginespeed (rpm) 4 000 4 000 4 000

EU standard maximumtorque (Nm) - 205 250

Maximum torque at enginespeed (rpm) 2 000 2 000 1 750

Fuel Diesel Diesel Diesel

Catalytic converter Yes Yes Yes

Manual Manual Manual AutomaticGEARBOX (5 speed) (5 speed) (5 speed) (4 speed)

UNIT CAPACITIES (in litres)

Engine (with cartridge replacement) 4,3 4,5 4,5 4,5

Gearbox-Final drive - 1,9 1,85 -

TECHNICAL DATA

Consumption In accordance with directive 93/116 [In MPG (litres/100km)]

Engine Gearbox Model Circuit Circuit Circuit Emission ofcodes Urban Inter-urban Mixed CO2 by

3C...3A... weight g/Km

1.4 litre Manual KFWB/T 32.5 (8.7) / 32.5 (8.7) 51.4 (5.5) / 51.4 (5.5) 42.2 (6.7) / 42.2 (6.7) 159 / 159

1.4 litre Turbo HDI Manual 8HZB/T 51.4 (5.5) / 51.4 (5.5) 4.0 / 4.0 4.5 / 4.5 120 / 120

1.6 litre 16V Manual NFUB 29.7 (9.5) 48.7 (5.8) 39.2 (7.2) 169

1.6 litre 16V Automatic NFUE 25.9 (10.9) 45.6 (6.2) 35.8 (7.9) 189

2 litre 16 V Manual RFNB 25.9 (10.9) 45.6 (6.2) 35.8 (7.9) 188

2 litre 16V Automatic RFNE 22.8 (12.4) 42.1 (6.0) 32.5 (8.3) 198

2 litre Turbo HDI Manual RHYB/T 40.9 (6.9)/40.9 (6.9) 65.7 (4.3)/65.7 (4.3) 54.3 (5.2)/54.3 (5.2) 138/138

2 l. Turbo HDI (120g) Manual RHSB 7,0 4,2 5,2 138

Fuel consumption values correct at time of printing.

TECHNICAL DATA

Weights and Towing loads (in kg)

3 and 5 DOOR PETROL / COMPANYEngine 1,4 litre 1,6 litre 16V 2 litre 16V

Gearbox Manual Manual Automatic Manual Automatic

Model codes : 3C... 3A... KFWB/T NFUB NFUE RFNB RFNE

· Kerb weight 1 234 1 217 1 268 1 251 1 304 1 287 1 294 1 277 1 330 1 313

· Gross vehicle weight (GVW) 1 659 1 642 1 693 1 673 1729 1 712 1 719 1 702 1 755 1 738

· Gross train weight (GTW*) 2 659 2 642 2 893 2 876 2 929 2 912 3 019 3 002 3 055 3 038

· Unbraked trailer 590 605 610 625 630 643 625 638 640 656

· Braked trailer (within GTW) 1 200 1 200 1 200 1 200 1 200 1 200 1 300 1 300 1 300 1 300

3 and 5 DOOR DIESEL / COMPANY

Engine 1,4 litre HDI 2 litre HDI 2 litre HDI (120 g)

Gearbox Manual Manual Manual

Model codes : 3C... 3A... 8HZB/T RHYB/T RHSB

· Kerb weight 1 271 1 254 1 335 1 318 1 371 1 354

· Gross vehicle weight (GVW) 1 696 1 679 1 760 1 743 1 796 1 779

· Gross train weight (GTW*) 2 836 2 819 3 060 3 043 3 136 3 119

· Unbraked trailer 635 627 655 659 685 677

· Braked trailer (within GTW) 1 140 1 140 1 300 1 300 1 340 1 340

The speed of a towing vehicle is limited to 60 mph (100 km/h).

Peugeot307

Documents

particle emission filter

particulate emission filter

gross train weight

dipped main beam headlamps

front fog lamps

front fog lamps

porsche tiptronic system

curtain air bags