Petroleum Engineering (full completion of the curriculum ... · Management methods of BOP panel and well control Knowledge. Fluent in English Language (Speak, Read, Write). Teamwork

GERD ALBERTO MILLAN MATA

IDENTITY CERTIFICATE: v- 13.055.961PASSPORT: 021677052CIVIL STATUS: UnmarriedCELL PHONES: 58426-5921244 / 584269955140

PLACE AND DATE OF BIRTH: October 22,1976; Maturin - VenezuelaADDRESS: Urb. Bello Campo, G Street, 38 House. City: Maturin, state: MonagasE-MAILS: [email protected] [email protected],NACIONALITY: VenezuelanSECOND LANGUAGE: English

EDUCATION

Petroleum Engineering (full completion of the curriculum of study, waiting for graduation)

COURSES AND CERTIFICATES OBTAINED

Certificate (IADC), Super/Drilling/work over/Full ( WCI A3747050) WELL CONTROL SCHOOL November, 2011. Maturin Time: 40 hr

Operations in H2S Environment ( CFPQ) DRILLING AND CONTROL November, 2011. Maturin Time: 16 hr

Certificate Community Project Academic. UDO NÚCLEO MONAGAS November, 2011. Maturin Time: 120 hr

Certificate Detection and control kit (WCI: 100009) WELL CONTROL SCHOOL December, 2009. Maturín Time: 16 hr

Prevention of closure and wells control SHA de Venezuela, C.A. Mach, 2009. Maturín Time: 16 hr

Occupational certification de PDVSA SHA de Venezuela, C.A. June, 2011. Anaco. Time: 16 hr

Security, Hygiene and Environment Certificate ( Part B) SHA de Venezuela, C.A. June, 2011. Maturin. Time: 16 hr

Operations in environment H2S Avapet Mach, 2007. Maturín Time: 08 hr

Prevention and risks control in operations of perforation Cnpc service Venezuela S.A. February, 2005. Maturin. Time: 08 hr

Approach for the safety (Number 1) Global Santa Fe Mach, 2002. Anaco. Time: 30 hr

True planning before the perforation Santa Fe Drilling Augusto, 2000. Anaco. Time: 16 hr

Sure well site learning workshop Santa Fe Drilling January, 1999. Maturín Time: 16 hr

Perforation and production petroleum wells Cecapet, C.A. February, 1998. Maturín Time: 300 hr

Operations in petroleum and petrochemical plants(floors) Cecapet, C.A. February, 1998. Maturín. Time: 300 hr

Wells Reconditioning Cecapet, C.A. November, 1997. El Tigre. Time: 62 hr

Programmed Teaching System (Part 1) S.O.V.C.A November, 1997. Maturín. Time: 30 hr

WORK EXPERIENCE

COMPANY:KDC Kuwait Drilling Company Function: Driller Time: 3 months (Nowadays)

COMPANY:CNPC Services Venezuela LTD, S.A. Function: Night pusher Time : 1 year and 5 months

COMPANY:CNPC Services Venezuela LTD, S.A. Function: Driller Time: 8 years Land Rig

COMPANY: Santa Fe Dilling de Venezuela, C.A. Function: Derrick man And Driller Time: 4 years jack up, triton

COMPANY: Baroid de Venezuela, S.A. Function: Technician III Dewatering Time: 8 moths Land Rig

SKILLS

Management methods of BOP panel and well control Knowledge. Fluent in English Language (Speak, Read, Write).

Teamwork and capacity of leadership. Complete Managing of the System of TOP DRIVERS and KELLY in equipments of 2000 and 3000 HP. Capacities immediately respond under pressure in works during the perforating perforations.

Skills in the mathematical calculations of Drill and written technical report of operation. Knowledge of the Manual of Engineering control of PDVSA's Risks.

Experience in exploratory wells with perforation of under balance and high balance.Rig up and Rig down.Responsible for safely and efficiently controlling the operations on the drill floor, ensuring safety of the drill crew and all support personnel.

AVAILABILITY IMMEDIATE

SUMMARY: I have Experiences in Land Rigs of 2000 and 3000 hp and Jack-up with the control console of Joystick, Cyber chair and conventional panel console too, and a depth of 16.000 to 21.000 Ft, knowledge with reference to fishing operations,equipments of bottom (engines, turbines and others), procedures for wells control, Solution in case of pipe sticking; Top drivers, in land rig 13 years experience, jack up 1 year and 4 moths, console BOP”s and mud pumps.

WORK EXPERIENCE:- I initiated working in “Baroid de Venezuela S.A” as a Technician III Dewatering on May 06, 1998; then I was

promoted to Technician I. I worked there until November 30, 1998.

- In December 11, 1998 I started to work in “Santa Fe Drilling de Venezuela. C.A”, I made different work activities, such as: Derrickman a (I worked with wedges). And also as Driller in jack up from Global Santa key victory. I worked there during three and a half years; I finished my activities on May 23, 2002.

- In 01-08-2002 I started to work in “C.N.P.C” (China National Petroleum Corporation); I have been working for 9 years and some moths in this company. In this company, I have made different work activities; I started to work as Driller with the Rig- BH63; in that position I was working for eight years. I worked 1 year and 4 moths as night pusher in the Rig- BH21.

- Nowadays, I’m working to KDC ( KUWAIT DRILLING COMPANY) AS DRILLER in the Rig- 10 3000 Hp,Wells with depth of 20500 ft

Note: the rigs in that I worked, we make different kind of drilling such as: drilling job, side track and work over, worked at perforations of wells, such as: j, s, multilateral, vertical and horizontal wells with a depth of 17.000 to 19.500 ft and others.

EDUCATION:I am graduated from high school and Nowadays, I am studying Petroleum engineer (Tenth Semester in process) at "Universidad de Oriente - Núcleo Monagas”. I am doing my "undergraduate thesis" to get my university degree.

COURSES AND CERTIFICATES OBTAINED: - Certificate IADC SUPERVISOR/DRILLING/WORKOVER/FULL“WELL CONTROL INTERNATIONAL”.- Operations in H2S Environment “ DRILLING AND CONTROL SCHOOLS ” - Occupational certification as DRILLER from “P.D.V.S.A”- Certification of control and wells closure from “WELL CONTROL INTERNATIONAL” (WCS: 100009 ) - Prevention of closure and wells control from “SHA de Venezuela, C.A.”- Occupational certification from “SHA de Venezuela, C.A.”- Security, Hygiene and Environment Certificate (Part B) from “SHA de Venezuela, C.A.”- Certification in H2S from “ Avapet”- Prevention and risks control in operations of perforation from “CNPC services Venezuela S.A.”- Approach for the safety (Number 1) from “Global Santa Fe”- True planning before the perforation from “Santa Fe Drilling”- Sure well site learning workshop from “Santa Fe Drilling”- Perforation and production of petroleum wells from “Cecapet, C.A.”- Operations in petroleum and petrochemical plants (floors) from “Cecapet, C.A.”- Wells Reconditioning from “Cecapet, C.A.”

- Programmed Teaching System (Part 1) from “S.O.V.C.A”- Class 5 Driver License- First Aid Certification

SKILLS:

Windows Microsoft office Knowledge, Fluent in Technical English (Speak, Read and Write), Teamwork and under pressure, Control and leadership of personnel, Detection and prevention at work accidents, Capacity immediately respond under pressure in works during the perforating operations, Knowledge in cases of lunges: closing wells and managing and use of the BOP´s panel(in cases the close hard y softy),Real experience in kit cases, Complete Managing of the System of TESCO, VARCO, NATIONAL TOP DRIVERS in equipments of 2000, 3000 HP land rig and jack up, Skills in mathematical calculations to obtain volume displacements, Works at heights, drill pipe tension’s with high weight (600-800 thousand) pounds, Descent of casing with weight of (450-800 thousand) pounds or more, Liner production, Immediate response in case of pipe sticking (differential, mechanics), Skills in the mathematical calculations of Drill and written technical report of operation, Knowledge of the Manual of Engineering control of P.D.V.S.A's Risks, Experience in exploratory wells with perforation of under balance and high balance, Organize and increase the efficiency of drill floor personnel. Check drilling programmers and calculations supplied, ensuring proper care and maintenance of the equipment and the drill floor, as well as maintaining productivity to ensure attainment of the Company's and the contracting company's goals and objectives.

ADDITIONAL INFORMATION:

In 2.007 I worked as driller and simultaneously, I initiated my studies of Petroleum engineer at "Universidad de Oriente -Núcleo de Monagas” in Venezuela, during several semesters. I was an adviser of the subject Perforation in the modality of laboratory and theory. At present, I am realizing my thesis of degree about a tool of cementation to finish the university career.