Factory 1/11, Venkataswamy Naidu Industrial Estate, Bharathi Colony, Peelamedu, Coimbatore - 641 004. Tamil Nadu, India. Ph: 0422 - 2563450 / 2563480 / 2563191 Mob: 99525 66600 / 98422 56525 Showroom & Demo Center 2 & 3, Rajagopal Layout, Avarampalayam Road, Peelamedu, Coimbatore - 641 004. Tamil Nadu, India. Ph: 0422 - 2563470 Mob: 7397395652 City Showroom 194- A, Ranga Konar Street, Kattoor, Coimbatore - 641 009. Tamil Nadu, india. Ph: 0422 - 2233257 Mob: 94439 36151 PET Bottle Capping Machine - Motorised This Capping Machine is used for capping PET bottles. Any PET bottle can be capped. However the capping die may vary according to the cap diameter. The Capper is powered by a 1/2 hP I PH motor with an attached gearbox. The capping die is fitted on the output shaft of the gearbox. The die rotates at an approximate speed of 100 RPM. After the PET bottle is filled, the cap is placed on it and the bottle with cap is pressed into the rotating Die. The rotating Die then automatically holds the cap and tightens the cap on the bottle. This whole operation takes about 4-5 seconds depending upon the dexterity of the operator. A torque setting is provided to ensure the correct tightness of the cap. The amount of tightness required can be adjusted with the help of spring-loaded ball provided. The advantage of the machine is that all the bottles are evenly tightened and operator fatigue is low. An optional stand is available to fix the machine on a wall or table. About 10 bottles can be capped per minute.